2021 Jeep JT Gladiator Install | Air Lift Rear 1000 Air Spring Kit
HTML-код
- Опубликовано: 10 сен 2024
- Welcome the video is to show you how to install the Air Lift 1000 Air Spring Kit. This kit will work with the existing suspension in your Jeep Gladiator to give it, even more, leveling support and stability! It will distribute your Jeep's weight to all four tires, which will help your tires wear more evenly. You will also notice an improvement in how well your pickup brakes and steers! Not only that, but this kit will also help decrease sway and increase the spring rate, and that will lead to a noticeable improvement in ride safety and comfort. But these springs from Air Lift do far more than make your ride safer and comfier-they also help keep your Jeep from bottoming out on rough and rocky roads! You will even see an improvement in how well your headlights aim since your pickup will be more stable and level overall. If you like Adventure, Rock Climbing, Overlanding or just getting out of the house please feel free to subscribe, like and share.
Big Thank you to
Mike with Outlaw Offroad and 4x4 for letting me use on of the shop bays to get it done.
*************************************************
Affiliate Pages
Defiance Tools Save 10% - defiancetools....
Use Code (AOX) when checking out
@defiancetools6049
Faster Flate - Save 10% - fasterflate.com?sca_ref=3399968.exBWEME1YX&sca_source=youtube
Use Code (adventureoffroadx) when checking out
Products and places to check out -
Air Lift Rear 1000 Air Spring Kit P/N 60830 - www.amazon.com...
@AirLiftCompany
Trail Gear Oasis trailgearoasis...
@Trail Gear Oasis
Drop Zone Distilling - drinkdropzone....
Ultimate9 - www.ultimate9.co/
Devo's Outdoor Lighting - www.devosoutdo...
@devosoutdoor
CVT Tents - cascadiatents....
@CVTCascadiaVehicleTents
TYRI Lights - www.tyrilights...
@Tyrilights
Social Media Links - linktr.ee/adve...
*************************************************
Thank you to my sponsors👍
iCandy Designz - (Wraps, Graphics, Apparel, Design)
icandydesignz....
Outlaw Offroad & 4x4 - (Lifts, Service, Fabrication, Wheels/Tires)
/ outlawoffroadand4x4
Phillips Chrysler Jeep Dodge Ram - (New/Used Vehicles Sales, Service)
www.phillipscj...
Mooseknuckle - (Recovery Gear) Get 10% off your order using Code (WarHawkjt10)
moose-knuckle.com?ref:Warhawkjt
Krawl Talk Media - (All thing off-road)
krawltalkmedia.com
**************************************************
Chapters
00:00 - Intro
**************************************************
Product's used
Rusty's Off-Road Products - Suspension - rustysoffroad....
Barricade Off-Road - Bumpers and Fenders - www.barricadeo...
KMC Wheels - www.kmcwheels....
Go Rhino - Bed Rack - www.gorhino.co...
CVT Roof Top Tent - cascadiatents....
SetPower Fridge - www.setpowerus...
SetPower Insulated Cover - icecofreezer.c...
ICECO Fridge Slide - icecofreezer.c...
Ironman 4x4 America 13 GAL Tank - ironman4x4amer...
Camplux Propane Shower - www.amazon.com...
Bayite 12V DC Fresh Water Pump - www.amazon.com...
#adventure #roadtrip #explore #invasion #jeep #wrangler #gladiator #party #carshow #jeeplife #camping #newyork #waterfall
Great Video! I was searching for a lifted Gladiator to see how they worked. I have a 4.5” lift on mine, so they should work good. Thanks again!!
Thanks✌️ They are still going strong with zero issues.
thanks for showing how to do this. appreciate it.
No problem they worked great and didn’t have any issues. Thanks for watching🤙
Nice walkthrough. Hope they work out well over time.
Thank you✌ They worked out perfectly defentlly highly recommend.
Thanks man! That video covered exactly the information that I was looking for.
Glad I could help✌️
Had at least two people comment this past summer asking how my JT Mjoave was sitting level with my bed loaded and trailer hooked up. They always want to know what springs in using. Shocked to learn it airlift 1000. Love mine!
That's pretty much the same way I found out about them. So I looked into them and l decided to give them a try and I'm glad I did they have worked flawlessly.
Is everyone leaving the factory spring isolators in place?
I already replaced the factory one with the aftermarket isolator when I did the lift.
Just put some of these in my gladiator to help with my sag from the rack and rtt. What psi are you running yours at?
On the road I was running 10-12 psi off-road I took them back down to 5psi.
How is this application still working for you today? I have a skyjacker 4 1/2 half inch lift, with 3 1/2 half inch rear coils, and nobody around here will install them, because it says it’s wrong application. Thanks!
It’s still working great I haven’t had any issues. If your going to be in a flexi trail then I would recommend airing them down but other then that it does exactly what they’re supposed to do.
Cool man I was looking at something like this. Especially when I tow a trailer with the toys. I am sagging a lot on my JT which also sits on a 4.5” lift. Tell us how it works out after your trip up North. I am interested in hearing the results. 🤙
It actually worked out great. They Got rid of all the sag and it felt stable on and off-road. I would highly recommend them to anyone.
Does it flex good?
Would the same parts number air bags would fit on my 3.5 lift? Thanks
Yes I'm pretty sure they will. The air bags have been a game changer when the rig is completely packed down.
How are these holding up? Any issues?
They have been working great and haven’t had any problems. The only thing I would recommend is if your doing any kind of flexi trails then you will need to air them down.