Hi, have put it into test mode and everything works well. But as soon as I try to use it the water comes in and immediately pumps out the water. Any idea what the problem can be?
Hi, my washing machine went completely dead, there was no power at all. So I thought it could be the circuit board, I got on from the ebay. After I carefully put it on, the power comes on, but showing F09 and flashing lights. What do I do, please can you advise me on this. Thank you
On this model on start of a spin with clothes in does the drum wobble violently until it gets up to full speed as we have the 9kg one and it's completely level and on a solid floor all transit bolts removed and clothing all balanced yet on start of spin goes nuts looks like it's lurching right to left and badly vibrating
To extend her life wash less clotes in one go , the drum wobble as the drum bering start getting faulty , you cant change it as this mashine have a seald water tank , are some totorials were they actualy saw the drum in half to change bering assambly and glue it back with silicon but i dont trust them
Have seen the videos of sawing the drum in half and gluing it back together for the amount of time it would take to do from a business point of view not worth it and wot happens if it leaks and floods the place would not like to trust it after
Hello. Do you know how ro reset (a code or button comvination) this washing machine? Mine keeps pumping water and drain it out while it is stuck on min. 26 and stays there a lot of time. Mayve a reset can help? Thank you
@@user-tim100 thank you for reply. I will tise the sink pipe, but it worked fine for 5 years as it was. I did not find anywhere a factory reset code 😞. Maybe it can help
How do you get the child lock off? Mine is stuck on... I've held the button for over five seconds and nothing.. I've unplugged it for over a week and still it's not turning off PLEASE HELP I'm at the end of my rope with this thing.
OLA TENHO ARISTON FMG723 SEMPRE APARECE O CADEADO ASSIM QUE METO NO PLAY ELA DA ME O CLIQUE MAS LOGO APARECE O CADEADO ALGUÉM ME PODE AJUDAR POR FAVOR OBG
Thanks this was very helpful! I did it myself and going to a video of doing it!
wow
Hello how to stop the noise of 3 sec locked keys in my hotpoint hablot washing machine. Theres always bit botton noise. Thank you
Hi, have put it into test mode and everything works well. But as soon as I try to use it the water comes in and immediately pumps out the water. Any idea what the problem can be?
Thank you so much...
Helped me a lot...
Which mode is wrinkles in this machine
Hello friend, Can you find out what the problem is with the Ariston washing machine f18 if it is possible
My machine isn’t turning on any steps you could provide me with I changed the fuse and checked socket
It might be the carbon brushes.
Can u tell me the test mode of Aniston hotpoint ARMXXF145
How long is the service mode meant to run? I'm getting 50mins on my machine.
Hi what's the egg timer symbol ? it won't go off and I can't seem to put a cycle on .
Boa tarde qual o programa mais adequado para a secagem de roupa desta máquina
You can’t dry clothes in it
Hi, my washing machine went completely dead, there was no power at all.
So I thought it could be the circuit board, I got on from the ebay. After I carefully put it on, the power comes on, but showing F09 and flashing lights.
What do I do, please can you advise me on this.
Thank you
F09 is a software fault you have to program the module when you get them to the right machine
I'm currently having a star sign at the left corner of my washing machine. Hotpoint 9kg. Please how do I reset it
U must clean the washer. Its Stained. Reset doesn't help.
On this model on start of a spin with clothes in does the drum wobble violently until it gets up to full speed as we have the 9kg one and it's completely level and on a solid floor all transit bolts removed and clothing all balanced yet on start of spin goes nuts looks like it's lurching right to left and badly vibrating
I have machines wobble a bit when they have a load in not sure how much this one would wobble
To extend her life wash less clotes in one go , the drum wobble as the drum bering start getting faulty , you cant change it as this mashine have a seald water tank , are some totorials were they actualy saw the drum in half to change bering assambly and glue it back with silicon but i dont trust them
Have seen the videos of sawing the drum in half and gluing it back together for the amount of time it would take to do from a business point of view not worth it and wot happens if it leaks and floods the place would not like to trust it after
tim 100 it does work ok, I had to saw mine, to change bearings , bonded it back with windscreen sealer, about 2 years ago, still works ok.
hi, the red lock symbol on my hotpoint 842 flashes and the machines beeps when I try to wash a load. Any ideas?
I'm currently having the same issue. Did you manage to resolve it?
@@Anass_L yes. For me it turned out that the machine was not getting enough power. One of the circuits breakers was faulty and needed replacing
Hello. Do you know how ro reset (a code or button comvination) this washing machine? Mine keeps pumping water and drain it out while it is stuck on min. 26 and stays there a lot of time. Mayve a reset can help? Thank you
There is a few reasons that it would do that would need to see the machine to work it out but one could be the waste pipe being to low
@@user-tim100 thank you for reply. I will tise the sink pipe, but it worked fine for 5 years as it was. I did not find anywhere a factory reset code 😞. Maybe it can help
How do you get the child lock off? Mine is stuck on... I've held the button for over five seconds and nothing.. I've unplugged it for over a week and still it's not turning off PLEASE HELP I'm at the end of my rope with this thing.
How do I put an NSWM into service mode?
Holding Temperature and Delay
Why does tap icon come up with H20 and beeps on Eco cotton programme.
H20 is normally a drain problem
How do you get if off test mode plz
Hi I did 1-2-1-3 spin then start but it just pauses it doesn’t start
Good, you're testing!
This does not work on my S-line 😭
I indesit and hotpoint I’ve got hotpoint two emxtf 942
Is only hotpoint in sat
How do you get it out of test mode plz
Switch it off and switch it back on again
Hotpoint 7kg Do-re-mi-fa-sol-la-si-do L600TA 600rpm
Didn't work on my one.
Teşekkür
It is working
Didn’t work
what a test mode to go through I wont buy a hot point wate of messing around lol
Every washer has the test mode. And you have to test it always.
ouchie, bearing sound bad !!
OLA TENHO ARISTON FMG723 SEMPRE APARECE O CADEADO ASSIM QUE METO NO PLAY ELA DA ME O CLIQUE MAS LOGO APARECE O CADEADO ALGUÉM ME PODE AJUDAR POR FAVOR OBG
This is a message from your brain. Your brain is experiencing issues and needs replacement. Now thank me.