Brilliant thank you, I now know how to use this machine, it was left in the flat when I moved in with no instruction book so your video really helped . 😊
I’m getting this machine as a new for old as my other one broke after 1yr... I am so happy you have uploaded this video as you have made it look so easy.. Thank you Sam x
Just purchased this model my old Hotpoint was fifteen yrs old, must say it`s quiet and washes excellent much improved on old model. One thing is i wish you had more control over programmes. thanks for the review.
Ours has started leaking from the compartment that holds the fabric softener/soap powder. We're going to see if performing an auto clean will help, as maybe somewhere is clogged up.
Thanks for the video, I've just bought the same machine, had it now 10 weeks. We were absolutely amazed how quiet it was and didn't jump about and make noises like our old Hotpoint. But now it's started shaking quite bad from side to side and rumbles, in fact the shaking is that bad it rattle's the pots and pans in the cupboards and the floor vibrates ,, I've checked it for level and it's perfect. I'm going to have to get in contact with the retailer because this is definitely not good
I’ve got this same washing machine and it washes the clothes very good as my old hotpoint first edition washing machine which was new in 2006 didn’t wash very well but I prefer the new one I’ve got now and the one in the video which is the same as mine
My machine door doesn’t seem to be warm on a 60c wash and only got this machine today... any advice would you normally feel any heat on the glass door.
@@TheSammybing thanks for getting back to me. I also wondered whether the weighing function is an option rather than a feature it does every wash. So can you override it in some way? Thanks.
Let alone will start to smell after a while, to kill germs inside the drum and washing machine you need 60'c or more and a longer wash. If you keep doing 30 minutes wash what you should do once a month is a maintenance wash. If your particular machine has no maintenance wash setting you can manually do it by Setting it to cotton's at 90'c , lowest spin speed no detergent or fabric conditioner and no clothes in the drum. Let it run . Could take 3 hours or more to complete but the 90c heat will kill the germs and make the machine smell better and dissolve the detergent gunk that left behind in the pump and drum where the short 30min and low temperature washes have left. Hope this helps.
this machine has an 'Auto Clean' function. just press the button/s with an empty drum (just add 10% of detergent or special additives -to clean the machine) and let it run. this takes 70 minutes. this (cleaning) should be done after every 40 wash cycles.
You lot are so brain-dead, how much you wanna bet that it tells you what the smart button means in the Manuel? And of course the washer isn't going to be silent during spin, it's silent on wash. Don't misinterpret the fact that it says "super silent"
@@TheSammybing well, but NOT a 30 min. wash/cycle.. it is 60 Minutes (1 Hour). the #9 and #10 is the ONLY Useful (or MOSTLY Use) cycle/programme of this Hotpoint washing machine.
We have this machine and to be honest the machine worked well for 2 years, now it's showing error code F08 which is apparently the heater... very costly to repair so would not recommend at all...these machines are not built to last!
neoartist1 I had one and it went wrong with F05 fault at only 4 months old. It also left my clothes smelling musty and it was bad at trying to balance the load. I had to get rid of it as it was not great.
youtuber the 1 shown in video... I still have the machine as it has only been used once per week,so has had little use...hopefully it could be repaired
@@terrytd4 ok. there are 3: WMFUG 742, WMBF 742 and WMXTF 742. also, pls click the 'reply' button on all the comments/replies you want to comment/reply on, so commenters can reply you back rather than just writing the commenter's username because they can't see it unless they review back their own comment/s. thx
Sorry no offence I have this model and I'm afraid to say it is one of the worst I have ever owned it jumps all over the place on interim spin my old bush washer never did that and certainly not the Servis one either..I would never recommend them . I suspect the bearings have gone already. As for washing results I would say pretty poor...towels come out hard etc..basically to sum up I cannot endorse this product
I have always had hotpoint washers this is the worst washer i have ever purchased my washing is no where near as clean as it always has been ,told by hotpoint it is because it uses less water , excuse me i thought you need water to wash would not recommend this washer only had 12 months ready to buy another one not hotpoint.
I'm afraid I have to agree with you that the washing has it's guts washed out of it! Also, most of my clothes labels generally say wash at 40° or 40+° .... there is no indication on the machine what number 40+ is
Brilliant thank you, I now know how to use this machine, it was left in the flat when I moved in with no instruction book so your video really helped . 😊
I’m getting this machine as a new for old as my other one broke after 1yr...
I am so happy you have uploaded this video as you have made it look so easy.. Thank you Sam x
I've just purchased the latest version of this model. It's replacing a very elderly Hotpoint Aquarius Extra which is about 25 years old!!
I have this machine, I think it's great. You do know, if you press the smart button and select speed, it will reduce your washing time by 50%.
Christopher Harris No way!!!! Let me check lol
Just purchased this model my old Hotpoint was fifteen yrs old, must say it`s quiet and washes excellent much improved on old model. One thing is i wish you had more control over programmes. thanks for the review.
Thank you so much for the amazing review purchased one today :-)
And on a side note you have a very beautiful accent and voice
Thanks I just bought the shop floor machine. No instructions! This is a great help!!!!
You can download the manual on the hotpoint website
Ours has started leaking from the compartment that holds the fabric softener/soap powder. We're going to see if performing an auto clean will help, as maybe somewhere is clogged up.
Thanks for the video, I've just bought the same machine, had it now 10 weeks. We were absolutely amazed how quiet it was and didn't jump about and make noises like our old Hotpoint. But now it's started shaking quite bad from side to side and rumbles, in fact the shaking is that bad it rattle's the pots and pans in the cupboards and the floor vibrates ,, I've checked it for level and it's perfect. I'm going to have to get in contact with the retailer because this is definitely not good
You probably need to adjust the feet for stability.
I have the exact same machine and it's amazing and really quiet and keeps my laundry so clean🙂
Harley is kewl Blah my cousin has that to
Tips for washing clothes Tips f8
Thanks for the support Really Helped Thanks I Subscribed
If you hold down Play/Pause button for few seconds it increases the wash time which i think depends on how much load your machine has.
What about the smart button?
I’ve got this same washing machine and it washes the clothes very good as my old hotpoint first edition washing machine which was new in 2006 didn’t wash very well but I prefer the new one I’ve got now and the one in the video which is the same as mine
I’ve got this washing machine which is excellent which I got it from curry’s pc world in July 2018 replacing my old hotpoint first edition one
My machine door doesn’t seem to be warm on a 60c wash and only got this machine today... any advice would you normally feel any heat on the glass door.
Thank you Sam for my clean clothes
does this machine have a pre-wash option?
Have you reviewed any other products?
Thank you.
I’ve still got mine 😙
I brought this same one about ago and it has broken down the barrel it not spinning what should I do?
Do you have a switch for the washing machine
I watched your video to find out what the "smart" button was for and guess which button you didn't mention😄.
Thank you. I have this. However didn't even no spin speeds existed. What's the average spin speed that I should use please? X
If ur using a tuble dryer sfter id use 1400 as it saves electric on the tumbe but 1100 would be fine for delicate or washing lined dryed clothes
Is it normal for the egg timer symbol to flash for a few mins when cycle starts. I can't see anywhere on instructions about this. Thanks
Yes it is, the machine is just calibrating the load of the laundry.
I wondered how long the 60 degree cotton wash is. Also is there an extra water option.
Hi no i have not found a feature for extra water. The cotton wash is 3hrs 15mins although u canjust select a fast wash at 60°c for 1hour
@@TheSammybing thanks for getting back to me. I also wondered whether the weighing function is an option rather than a feature it does every wash. So can you override it in some way? Thanks.
@@clairelovelock7270 ive not tried that 🤔
@@TheSammybing I ended up buying this machine. It is super quiet. I love it.
Try to avoid 30min cycle because it's not good for machine will have lime scale all over it and heating problems
Let alone will start to smell after a while, to kill germs inside the drum and washing machine you need 60'c or more and a longer wash. If you keep doing 30 minutes wash what you should do once a month is a maintenance wash. If your particular machine has no maintenance wash setting you can manually do it by Setting it to cotton's at 90'c , lowest spin speed no detergent or fabric conditioner and no clothes in the drum. Let it run . Could take 3 hours or more to complete but the 90c heat will kill the germs and make the machine smell better and dissolve the detergent gunk that left behind in the pump and drum where the short 30min and low temperature washes have left. Hope this helps.
this machine has an 'Auto Clean' function. just press the button/s with an empty drum (just add 10% of detergent or special additives -to clean the machine) and let it run. this takes 70 minutes.
this (cleaning) should be done after every 40 wash cycles.
Which number is the highest temperature please
Unfortunately you can't. I put mine on a no 9 and adjust temperature to 30c
How do I open the door, is locked up and I cannot open it
Does the anti allergy plus still work?
yes it does
Can we dry clothes... I bought this but can't find an option😐
sneha shashanka no unfortunately this model is not a washer dryer
How does the smart button work exactly? When I press the smart button all the lights flash on but that's all? And my machine is def not quiet??
Lisa Dengering yep neither is ours and it’s fairly new it’s very noisy
You lot are so brain-dead, how much you wanna bet that it tells you what the smart button means in the Manuel?
And of course the washer isn't going to be silent during spin, it's silent on wash. Don't misinterpret the fact that it says "super silent"
Tyrese lol that made me laugh.. dude it shouldn’t be as noisy as that and move from one part of the kitchen to another mannn it’s a brand new machine.
@@Tylysia *Manual
hi.how do you get the smart button to work?
the smart button works on select cycles not all..
Your other option is to set the 30min cycle then once it is complete put it onto just a spin cycle and this will spin at 1400
samantha goble mine decides to power on after switching off and is defo not quiet. We have only had for under 1 year
yes, the 30 min (Fast Wash 30 or Number 10) cycle will ONLY spin at 800 and NOT at 1400. and also, ONLY on a 30 degrees maximum temperature.
@@stfuplsok i put mine on a number 9 cycle then just lower the temperature to 30°c that way you get a 1400 spin
@@TheSammybing well, but NOT a 30 min. wash/cycle.. it is 60 Minutes (1 Hour).
the #9 and #10 is the ONLY Useful (or MOSTLY Use) cycle/programme of this Hotpoint washing machine.
Hi how do u switch the delay timer off please
Just keep pressing the delay button until is says zero again
If I do a 30min wash how do I change the spin speed to 1400
It's fast wash, it's programmed to be a quick wash, it doesn't have time to go up to 1400, use your brain.
How to play games on thiss washing machine thingy
Have same machine but hotpoint seem to now use cheap chinese drum bearings that lasted just short of 2 yrs..(out of warranty)
Thats a shame, mines still going strong and is in use most days. I must admit i mostly use the 90min cycle
We have this machine and to be honest the machine worked well for 2 years, now it's showing error code F08 which is apparently the heater... very costly to repair so would not recommend at all...these machines are not built to last!
neoartist1 I had one and it went wrong with F05 fault at only 4 months old. It also left my clothes smelling musty and it was bad at trying to balance the load. I had to get rid of it as it was not great.
She said the door will unlock within 30 secs umm didn't you just see and hear that the door unlocked
Help my washer is showing f05 its s smart tech wmfug942
What about when the door breaks
Did you found any solutions ? I have problem with doors as well! I can't open them :(
My 742 lasted 18 months now it trips circuit fuse after 5 minutes into a wash cycle
what model of 742? there are 3 including this one..
youtuber the 1 shown in video... I still have the machine as it has only been used once per week,so has had little use...hopefully it could be repaired
@@terrytd4 ok. there are 3: WMFUG 742, WMBF 742 and WMXTF 742.
also, pls click the 'reply' button on all the comments/replies you want to comment/reply on, so commenters can reply you back rather than just writing the commenter's username because they can't see it unless they review back their own comment/s. thx
The 742 is one of the models which was recalled for being faulty, get in contact with Hotpoint asap.
Оригинально объяснила!!!! 😂😂😂😂😂😂
Ya machine urdu ma chalana ka tariqa batia
The drum is nowhere near the size of my old hotpoint
How do I use the dryer on it plz
Hi nigel unfortunately this model does not have a dryer function
Had this machine for 5 months and had the engineer out 3 times, would not buy again, not worth the money
Thats such a shame i have had mine 4 years now and not a problem at all and it goes on once a day
true i have repaired many of these , cheap and unreliable ,typical whirlpool though..,
A TY Z ANGLI DAJE LIKE W DUŁ😬😬😬
Sorry no offence I have this model and I'm afraid to say it is one of the worst I have ever owned it jumps all over the place on interim spin my old bush washer never did that and certainly not the Servis one either..I would never recommend them . I suspect the bearings have gone already. As for washing results I would say pretty poor...towels come out hard etc..basically to sum up I cannot endorse this product
Lambchop 71 mint sauce I agree with the part when it can jump about
I have always had hotpoint washers this is the worst washer i have ever purchased my washing is no where near as clean as it always has been ,told by hotpoint it is because it uses less water , excuse me i thought you need water to wash would not recommend this washer only had 12 months ready to buy another one not hotpoint.
I'm afraid I have to agree with you that the washing has it's guts washed out of it! Also, most of my clothes labels generally say wash at 40° or 40+° .... there is no indication on the machine what number 40+ is
@@cherriebeckett4878 has *its this machine has 60 degrees on it.
Lmao you all have unstable floors.
It's rubbish. Had mine 18 months and it's packed up and beyond repair. Waste of money.
Daniel Ingram oh no. Thats a shame you had a faulty one. Mine is now nearly 3 years old and still going strong.
Ha you tried. Lmao Hotpoint is good.
Daniel Ingram I had the same issue with this model too. Had to get rid of it.
Mine is going fine. Think its 4 years old.