This bloke deserves a medal! He is brilliant at this - simple clear concise and very knowledgeable. He does not talk down to his audience at all and is just very impressive. I actually did not need this tutorial as the fault I had turned out to be in the electrical socket, However i kept watching because he was just so very good, As an ex teacher I wish I could have done my job even half as well!
It is not often I am humbled with a comment but thank you very much for the praise please remember to subscribe to the channel as we do a live show a few times a month
I was thinking similar! Really easy to watch and bloody helpful! 😁 I will definitely look into ordering any parts I need from them and buying them a beer! 😍
glad we could help you @douglasmatheson403 Taking a picture before continuing is a good idea, as it allows you to document your progress and make sure that you have a reference point for where you left off. It also helps to ensure that you don't forget any steps or miss any important details. this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
Thank you very much for subscribing to the channel it is much appreciated as it really does help us and remember you can always share our channel with your friends if they need assistance here is the video that is really important. If you have a vented tumble dryer, it will save your friends lives and also make them financially better off. ruclips.net/video/DHMoZcZJ-nQ/видео.html
I love how you get to the point quickly (unlike many other repair channels). I didn't have to skip once! Will try to take a look at the board. The issue I've got now is getting the washing machine out. It's stuck locked with water and clothes inside 😖
As a television Engineer with 35 years experience you have explained this brilliantly step by step keep up the step by step instructions bet you cant find the fault on a Hoover washer vt814/d21 that goes through cycle but will not heat water
Thanks for that- good demo of how to replace capacitors- Absolutely the main reason for failed pCB's in everything thats made in China these days, tellys, plug in power supplies, SKY Boxes- the list goes on, I've saved us thousands doing this!
Iam Glad we could help you Please remember to subscribe to our channel ruclips.net/user/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RUclips. ruclips.net/user/Apart4u Facebook. facebook.com/how.to.repair.appliances
Hi the video was great. I own a LG front loading washing machine and it doesn't complete its cycle, goes off after 4 minutes, no matter what mode of wash you choose. You gave me the idea, that the control unit could be repaired than replacing it. So i got the courage to open it and the problem was the tube to the " Pressure Switch " was detached, Plugged it back in, the washing machine was ok. Thanks
Thank u so much for tutorial, my whirlpool recently developed this same very issue. Now i at least have an idea what the issue might be. Ur very good at explaining. Cheers😊
Thank you! 🙂 Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Thank You Sir, for your honest approach to Troubleshooting a malfunctioning Washer. All, I've seen so far is that if a circuit board is Bad there is Nothing to be done - except to Replace it. It is refreshing to see that there are honest professionals that don't mind showing that electronics can be repaired and it doesn't necessarily mean that you have to Buy a New Board at $300-400 dollars a pop.
Glad we could help you remember to Mark us down to your favourites. You never know when you need help with an appliance @Goda00100 please remember to subscribe to our channel as that really helps us ruclips.net/user/shortse432SAb2g08 Thanks, Paul 👍
Great advise im having the same problem with machine cutting out, i will take a look at my circuit board hopefully it maybe something simple. Many thanks
Hey there. Great video thanks. My caps all look fine, so I'm wondering if it's the lynk switch ic. What does that do exactly? If my machine is cold the screen will start up and stay on for 3 secs, if it's not long since I tried to fire it up, it won't stay on long at all if not start up at all
if you have power to board it might be link switchThank you For leaving a comment this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
My ariston washing machine working since about 12 years without any problems but now it stop at washing step after about 10 minutes sometimes stops and sometimes nostrils....from your great point of view what is the reasons ... how I can repair Thank you very much
If the washer is staying locked after cutting out during load sensing- is it more likely a door lock problem or what you fixed here on the circuit board. It also has a very faint sound coming from it? I do not I can unplug it to get it to unlock. So when I plug it back in after a 3-5 min unplug, the door will open but then it will start beeping at me so I close the door and it relocks 🤔
Thanks a lot for your comment. Since we work very hard in our warehouse making free video guides, you can always donate us via www.how-to-repair.com/help/buy-paul-a-beer/ Could you also do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇 Here's the poll question: www.youtube.com/@How-to-repair/community Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.
Iam Glad we could help you have a good xmas and more cuircuit board videos on the way Please remember to subscribe to our channel ruclips.net/user/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RUclips. ruclips.net/user/Apart4u Facebook. facebook.com/how.to.repair.appliances
Wow, I expected 'how to replace a door switcg' or 'how to replace a control board' - no one talks about board level repair anymore. Apparently everyone is fooled into thinking a $200usd board must be replace even though parts are under $1 and time is about the same. It's criminal. I pick up used junk to fix for pennies. Thank you, consumer suckas! Just got a front loader washer, replaced caps on an imac and a Samsung large TV before (free)!
Also check power connection to the wall, especially if you use splitter, for example to plug in washing and drying machine into singe outlet. Splitter can corrode inside, nothing is visible outside, but due to moisture it can corrode inside over time and make these problems.
I had a Whirlpool Duet that would power itself off mid cycle but only in cool weather. It turned out to be the touchpad panel. It was sensitive to temperature or humidity or maybe both.
Hi. Thanks for the nice video. I have Miele W3204 washing machine which is only working on the centrifugal and 15-minute washing programs. For all other programs, it stops after 2-3 minutes and the start light starts blinking. Pressing the start button restarts the machine, but it stops again after 2-3 minutes and the start light blinks again. Please suggest me how to fix. Thanks
Hi, please use our contact us page and make sure you fill out the request for what your problem is. I will need the full model number of the identification plate and the details of your problem so that I can provide you with useful literature. A video shoot of the problem would be perfect as well. I will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
I am having a similar problem with my LGWT1101CW top loading washing machine. The components look fine. what other part on the circuit board could be causing my issue with it powering off and on all the time.
I wish it was that simple to fix with an old Miele Novotronic. Can't remove the control panel and can't even find the PCB. Hope there is an other tutorial available for that type of washing machine.
Thank you a lot ! I hope, that I have same problem with my Candy Aqua 1000 t , it fill water for 15 s , and then stops. Same with squeezing clothes, it pumps out water and then stops
Iam Glad we could help you. My Ebay Shop rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fstr%2Fhowtorepair&campid=5338676951&toolid=20008 If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel ruclips.net/user/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RUclips. ruclips.net/user/Apart4u Facebook. facebook.com/how.to.repair.appliances
Hello, Can you please help me? I have Miele W1514. It turn off midcycle. I gave changed the cardboard. It worked for some months, then again the problem appeared. Sometimes it keeps working until the cycle is finished...othertimes, it shuts down. What could be the root of the problem? I am thankful to you.
thanks that makes me feel very young lol @lienchen12 please remember to subscribe to our channel as that really helps us ruclips.net/user/shortse432SAb2g08 Thanks, Paul 👍
Hi how-2-repair. got a zanussi FJD 1466w, started my wash and after about 5 mins there was aloud click sound come from the washer and it stopped and all lights except the power light have all gone off on the control panel, im not sure if that loud click was the door lock coming off as the washer stopped, ive turned off and back on but nothing, does this sound like a new control panel replacment? thanks for ur time and help Matt
Hi, maybe you or someone on the forum can help me with my problem? My Panda PAN70SW washing machine not start working after turning it on and shows code C1 and all lights start blinking. After unplug power cord and plug it again washer starts washing cycle. After finishing cycle the problem appears again. What's the problem?
Can you do us a favour and please share this video on your timeline Facebook twitter etc . This will help other people who can’t get engineers out to help them. ruclips.net/video/rFyGAHVFUW8/видео.html&t facebook.com/how.to.repair.appliances/
Hi how about dryer pcb, already replace the ic make dryer stop in 5 minit, but after replace it, the pcb make tripping, can u tell what i need to do, thanks in advance
If a capacitor goes is there a chance it’ll get going again? My washing machine is 10 years old and it intermittently stops working. The cost of an engineer / new machine....I’m not sure what’s best x
I suggest you use the contact us page and give me your make and model so I can find the correct literature for you. I will need the full model number of the identification plate, please use our contact us page and make sure you fill out the request of what part you are after and will get back to you within 24 hours normally www.how-to-repair.com/help/contact-us/
I have an electrolux eww1476wd and after doing laundry, it does not want to turn on the dryer heater. the fan that exchanges the air in the drum from the machine turns on, but the heater does not want to. NTC sensors show resistance. the electronics have no mechanical damage and the relays are all OK. Maybe it needs to be reset, but I can't find anywhere how to do it??
It can only be the heater or thermostat bad connections can be a problem or it will be the printed circuit board. This is all that controls the heating system glad we could help you @uroubiparip4662 this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
@@How-to-repair Thank you. When I connect the heaters from the dryer directly to the voltage, then it starts heating the air. I can't find the values of the ntc resistors to monitor the output temperature and the temperature inside the drum. But when the heaters work directly, the dryer finishes the 2-hour program in 45 minutes.
Hi again how-2-repair.thanks for vids great help. i found my problem and its the module board not the control panel, but having difficulty finding parts, as my washer is 16yrs old parts are obsolete, but with watching you vid one of the chips that is blown is a link switch, but turning over the module board there is a S shape black scorch mark and i should say its taken afew more components out aswell as itself, but im prepared to buy and replace the components myself as really cant afford anew washer at moment, ANY help or advice would be VERY grateful.Thanks Matt
Subscribed! I need a new washer and everyone was telling me to 'stay away from electronics', but they all are and I'm a sparky who fixes things. I'd rather deal with this than relays and new shock parts, etc. We'll see.
hi , i got a maytag washer 4000 series model MHWE450WW00 that leaves the clothes wet and i saw it shut down when there was 11 minutes left last time. Any suggestions. thanks alot.
My washer is GE, was turned on, display door locked after about 23 seconds, I heard one soft click and then door lock released automatically. I have replaced a circuit board and inlet valve and door lock, but the machine is still not working. Pleased hep find it's problem.
Sir new panel is changed and sensor is changed 2months ago but now suddenly start button on and gets off and the programe won't start beeping sound what to do
Hello, I have a beko 7 series excellence wm, I have gone through the diagnostic cycle and it all corresponds to your tutorial video. However when I then try to use the machine the water runs through the draw as it is supposed to but the water just runs straight through the machine and it does not fill up, any suggestions would be appreciated TIA regards wayne
Sir, I owned the lg 7 kg direct inverter front Loader recently before a month. dE 1 error came in between the cycle even the door was locked, and on and off in between and speed is also lower than normal, we replace mother board also, what to do sir?
A while ago on RUclips, you ask me a question about your LG washer. I just thought I’d let you know that I have now made a complete playlist to assist you in any repairs that you ever have. If it helps, you don’t forget to share it with your friends who may also own an LG. ruclips.net/video/w5dZ4Pj8Jdo/видео.html
Hi mate I have samsung ecobubble 8kg washer. On some of programs it runs but stops after 15-20 minutes. When I press the pause button on and off it starts again but stops again. When running it makes a constant sound but when it stop there's no sound. Any tips how to solve this problem. Seen you video on calibration, tried it but no luck.
Intermittent faults are very hard for me to be able to give you a direct answer as I do not have the machine on my workbench. You may have a dry joint or something. It's disconnecting during the wash cycle. I'm sorry I can't be any more help. Have a great Christmas and a happy New Year. glad we could help you @asifiqbal3855 this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
Hi,I have a Samsung wobble technology washing machine,I'm experiencing frequent stopped and then it turn off for a while,must wait at least 30 minutes to start it again. What are the possible causes for that,any idea
i have a washing maching of a Samsung model wfo700ncw that have only stuck on one program ie cotton, there is no child lock so i wonder what the problem might be.....pls help.
Hello, good day, sir Pls I have a bruhm top load washing machine, the board turns on but the machine doesn't work, I tried testing the motor separately but it works, but if you turn the machine on and gives it command, it won't work Pls I need your help Thank you, sir
I am not very familiar with this model. I’m sorry but do you want to check the door locking mechanism? As if this is not registering that the door is shut? It will not allow the machine to start.
Iam Glad we could help you. My Ebay Shop rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fstr%2Fhowtorepair&campid=5338676951&toolid=20008 If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel ruclips.net/user/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RUclips. ruclips.net/user/Apart4u Facebook. facebook.com/how.to.repair.appliances
Iam Glad we could help you Please remember to subscribe to our channel ruclips.net/user/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RUclips. ruclips.net/user/Apart4u Facebook. facebook.com/how.to.repair.appliances
Hello, I have a question regarding my LG front load Direct Drive washer purchased in 2014. The original board malfunctioned on me and needed replacement. Before the board blew out on us there was this strange electric burning smell emitting from the washer. At first I thought it might be the heater and or thermistor, but they checked out normal with my multimeter. I replaced the board recently and started testing the machine with different sized and timed cycles. The top and rear panels are still detached until testing is completed. Yesterday I washed 4 loads of 1 hour cycles. Up through the 3rd load everything was normal, no smells, or error codes being displayed. After the 4th load chimed, I entered the garage and there was that electric burning odor again, just like the previous time prior to the machine going D O A. The smell emitted from the Direct Drive motor assembly and the aluminum cover that spins with the assembly was extremely HOTTER than normal to the touch. Is this a normal thing with these Direct Drive motor assembly? Should it emit this type of smell? The last time I smelled this type of electric was when the balast inside my light timer burned up/ Even thought the balast burned leaving a brown mark on the external surface, the timer continued functioning. Do you have any ideas regarding this issue? Have you or anyone you know, or customers every mentioned anything regarding this phenomemon? Any thoughts would be greatly appreciated. THx Robert
My LG front loader machine stopped.i replaced the main circuit board and it's still dead. The outlet is ok, because the dryer runs from the same outlet. I paid$240 for that part! I'm pissed, now I'm thinking it's the display controller board
Mine starts then switches off after so long, if left it will eventually switch itself back on and finish the cycle...what could be causing this, it fills and drains fine also mines not a digital but basic front loader...?
Hi how-2-repair. Thank you for your video. I have a question hoping you ca help me. I have a Bosch machine that is not working since one week. I don't know what is the problem and I don't know if it's an error or a piece of the machine. When I choose a program with the door open and then I close the door, the machine tries to put the lock of the door several times (for about 10 seconds) but then nothing happens. The "start" button flashes and I try to activate it but notihng happens. So I tried to program the machine but this time whit the door closed. Again, we hear that the machine tries to put the lock of the door several times but nothing happens and even worst, if I touch the "start" button during the first 5 second, the circuit breakers leap. I thought that it could be the heater or the interference filter but both are ok. Can you help me please??? I don't know if it's just an error of the circuit (even if I don't have an error code on the display). Thank you very much you for your help.
hii there I have a Grundig gwn 48430 cw washing machine that start and then stops after the door look clicks and then stays on wash with nothing happening
'water tank full ' light comes on every few minutes on our Beko condenser dryer. There isn't any water in the tank though. machine will start again but light comes back on, andthe machine stops again.
Hello! I have a Kenmore model 7964027#2900 that turns off after 30 seconds or so whether I put it on a cycle or not, looked at the capacitors on the board, they look ok. the board is different than the one on the video buried in some jell. Anything else I can check?
Dear, I want to ask you that If light is went out while running washing machine. When light comes to kya program fir se start hoga ya wahi se hi shut hoga
Disconnect the heating element and check it . It's a bit difficult to test a heating element because at times it shows connection but it's the resistance is not as needed and we don't know the value it's supposed to be. A better check is with s Megger meter but that's costly. It's easier buying a new heating element and replacing.
I will check for any loose connections, and also check if you have problems with the carbon brushes in the motor has intermittent faults can cause all sorts of issues
Many thanks for your advice. The engine is carbon-free. I have checked many connections and electrolytes/capacitors. The problem was gone for several months but now back. I'll try again 🙂 I have a theory that something is overheating. As if, when it has cooled down a bit, it starts again. The subsequent washes have run without problem.
I have just watched your video on washing stop and starts.I have got exactly the same problem.If i send you the motherboard,can you repair it and send it back to me with your costs etc?Thanks
sorry we dont do repairs as we need the machine to test after Iam Glad we could help you Please remember to subscribe to our channel ruclips.net/user/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RUclips. ruclips.net/user/Apart4u Facebook. facebook.com/how.to.repair.appliances
We now have Live Q@A's weekly on our live Show , see our home page ruclips.net/user/How-2-repair for next date
This bloke deserves a medal! He is brilliant at this - simple clear concise and very knowledgeable. He does not talk down to his audience at all and is just very impressive. I actually did not need this tutorial as the fault I had turned out to be in the electrical socket, However i kept watching because he was just so very good, As an ex teacher I wish I could have done my job even half as well!
It is not often I am humbled with a comment but thank you very much for the praise please remember to subscribe to the channel as we do a live show a few times a month
I was thinking similar! Really easy to watch and bloody helpful! 😁
I will definitely look into ordering any parts I need from them and buying them a beer! 😍
taking a picture before continuing is universally always a very great idea!! I do this a lot on most projects!
glad we could help you @douglasmatheson403 Taking a picture before continuing is a good idea, as it allows you to document your progress and make sure that you have a reference point for where you left off. It also helps to ensure that you don't forget any steps or miss any important details. this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
So nice to hear someone who is genuinely knowledgeable. As someone said, you can watch these even when the job has been done. One happy subscriber.
Thank you very much for subscribing to the channel it is much appreciated as it really does help us and remember you can always share our channel with your friends if they need assistance here is the video that is really important. If you have a vented tumble dryer, it will save your friends lives and also make them financially better off. ruclips.net/video/DHMoZcZJ-nQ/видео.html
I love how you get to the point quickly (unlike many other repair channels). I didn't have to skip once! Will try to take a look at the board. The issue I've got now is getting the washing machine out. It's stuck locked with water and clothes inside 😖
As a television Engineer with 35 years experience you have explained this brilliantly step by step keep up the step by step instructions bet you cant find the fault on a Hoover washer vt814/d21 that goes through cycle but will not heat water
give us a call and i will do my best
Thanks for that- good demo of how to replace capacitors- Absolutely the main reason for failed pCB's in everything thats made in China these days, tellys, plug in power supplies, SKY Boxes- the list goes on, I've saved us thousands doing this!
Iam Glad we could help you
Please remember to subscribe to our channel
ruclips.net/user/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
RUclips. ruclips.net/user/Apart4u
Facebook. facebook.com/how.to.repair.appliances
Thanks!
Hi the video was great. I own a LG front loading washing machine and it doesn't complete its cycle, goes off after 4 minutes, no matter what mode of wash you choose. You gave me the idea, that the control unit could be repaired than replacing it. So i got the courage to open it and the problem was the tube to the " Pressure Switch " was detached, Plugged it back in, the washing machine was ok. Thanks
Please use the Ask paul a question page if you need help and i will reply in less than 24 hours www.how-to-repair.com/help/contact-us/
Thank u so much for tutorial, my whirlpool recently developed this same very issue. Now i at least have an idea what the issue might be. Ur very good at explaining. Cheers😊
Hi, this is excellent 👍👌 I have a problem with the same start and stop. Thank you.
Wow what a great video. Wonder why some people thumb down this good helpful video. Haters are loosers.
Brilliant explanation 😊
Thank you! 🙂 Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Good day bro your channel content it's help me a lot as guide for washing machine repair.
It's really easy, just a few pounds for parts, plus a twenty-thirty years of experience, and hands made of gold :-) Thank you!
P
Thank You Sir, for your honest approach to Troubleshooting a malfunctioning Washer. All, I've seen so far is that if a circuit board is Bad there is Nothing to be done - except to Replace it.
It is refreshing to see that there are honest professionals that don't mind showing that electronics can be repaired and it doesn't necessarily mean that you have to Buy a New Board at $300-400 dollars a pop.
Thank you for your teaching and honesty.
Glad we could help you remember to Mark us down to your favourites. You never know when you need help with an appliance @Goda00100 please remember to subscribe to our channel as that really helps us ruclips.net/user/shortse432SAb2g08 Thanks, Paul 👍
Great advise im having the same problem with machine cutting out, i will take a look at my circuit board hopefully it maybe something simple. Many thanks
You mean advice,it has a c not s
Brilliant .. I actually think I could do this after watching your vid .. very useful thanks
Glad it helped
Fantastic video. Well worth the effort to try and do the repair. Thanks.
Today i repair mine exactly the same model and tha same problem. Wish i had see this video earlier before disassembly the hole washing machine.
I'm glad I could help you please remember to subscribe to the channel as that's what keeps us going and able to make these videos for you
Hey there. Great video thanks. My caps all look fine, so I'm wondering if it's the lynk switch ic. What does that do exactly? If my machine is cold the screen will start up and stay on for 3 secs, if it's not long since I tried to fire it up, it won't stay on long at all if not start up at all
if you have power to board it might be link switchThank you For leaving a comment this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
I'm having the same problem with my whirlpool washer. This video will be a great help! Thanks.
Subbed. Great, informative video.
My ariston washing machine working since about 12 years without any problems but now it stop at washing step after about 10 minutes sometimes stops and sometimes nostrils....from your great point of view what is the reasons ... how I can repair
Thank you very much
Brilliant Thank you You d be a great teacher
If the washer is staying locked after cutting out during load sensing- is it more likely a door lock problem or what you fixed here on the circuit board. It also has a very faint sound coming from it? I do not I can unplug it to get it to unlock. So when I plug it back in after a 3-5 min unplug, the door will open but then it will start beeping at me so I close the door and it relocks 🤔
Nice tutorial
Thanks a lot for your comment. Since we work very hard in our warehouse making free video guides, you can always donate us via www.how-to-repair.com/help/buy-paul-a-beer/
Could you also do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇
Here's the poll question: www.youtube.com/@How-to-repair/community
Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.
Great tutorial!!! Looking forward to more board level repairs
Iam Glad we could help you have a good xmas and more cuircuit board videos on the way
Please remember to subscribe to our channel
ruclips.net/user/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
RUclips. ruclips.net/user/Apart4u
Facebook. facebook.com/how.to.repair.appliances
Craig's list
Thank you!!! This was incredibly helpful. I've now subscribed too.
Just helped me nice one
Wow, I expected 'how to replace a door switcg' or 'how to replace a control board' - no one talks about board level repair anymore. Apparently everyone is fooled into thinking a $200usd board must be replace even though parts are under $1 and time is about the same. It's criminal. I pick up used junk to fix for pennies. Thank you, consumer suckas! Just got a front loader washer, replaced caps on an imac and a Samsung large TV before (free)!
Thanks for this video it helps me a lot, now I’m calling the service center..
best video I have seen yet and I have seen MANY Thanks!!!
Also check power connection to the wall, especially if you use splitter, for example to plug in washing and drying machine into singe outlet. Splitter can corrode inside, nothing is visible outside, but due to moisture it can corrode inside over time and make these problems.
I had a Whirlpool Duet that would power itself off mid cycle but only in cool weather. It turned out to be the touchpad panel. It was sensitive to temperature or humidity or maybe both.
Hi. Thanks for the nice video. I have Miele W3204 washing machine which is only working on the centrifugal and 15-minute washing programs. For all other programs, it stops after 2-3 minutes and the start light starts blinking. Pressing the start button restarts the machine, but it stops again after 2-3 minutes and the start light blinks again. Please suggest me how to fix. Thanks
Hi, please use our contact us page and make sure you fill out the request for what your problem is. I will need the full model number of the identification plate and the details of your problem so that I can provide you with useful literature. A video shoot of the problem would be perfect as well.
I will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
Thanks its good to gain more knowledge mostly for the beginner in this field.
I am having a similar problem with my LGWT1101CW top loading washing machine. The components look fine. what other part on the circuit board could be causing my issue with it powering off and on all the time.
Hello . It was very helpful for my situation was just the door !! Thanks !! Keep going !
I wish it was that simple to fix with an old Miele Novotronic. Can't remove the control panel and can't even find the PCB. Hope there is an other tutorial available for that type of washing machine.
Thank you a lot ! I hope, that I have same problem with my Candy Aqua 1000 t , it fill water for 15 s , and then stops. Same with squeezing clothes, it pumps out water and then stops
Iam Glad we could help you.
My Ebay Shop rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fstr%2Fhowtorepair&campid=5338676951&toolid=20008
If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel
ruclips.net/user/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
RUclips. ruclips.net/user/Apart4u
Facebook. facebook.com/how.to.repair.appliances
Hello, Can you please help me? I have Miele W1514. It turn off midcycle. I gave changed the cardboard. It worked for some months, then again the problem appeared. Sometimes it keeps working until the cycle is finished...othertimes, it shuts down. What could be the root of the problem? I am thankful to you.
thanks paps!
thanks that makes me feel very young lol @lienchen12 please remember to subscribe to our channel as that really helps us ruclips.net/user/shortse432SAb2g08 Thanks, Paul 👍
Hi how-2-repair. got a zanussi FJD 1466w, started my wash and after about 5 mins there was aloud click sound come from the washer and it stopped and all lights except the power light have all gone off on the control panel, im not sure if that loud click was the door lock coming off as the washer stopped, ive turned off and back on but nothing, does this sound like a new control panel replacment? thanks for ur time and help Matt
Hi, maybe you or someone on the forum can help me with my problem? My Panda PAN70SW washing machine not start working after turning it on and shows code C1 and all lights start blinking. After unplug power cord and plug it again washer starts washing cycle. After finishing cycle the problem appears again. What's the problem?
Well done and clear video. Thanks
Can you do us a favour and please share this video on your timeline Facebook twitter etc .
This will help other people who can’t get engineers out to help them.
ruclips.net/video/rFyGAHVFUW8/видео.html&t
facebook.com/how.to.repair.appliances/
Top drawer video that pal!
thanks
Hi how about dryer pcb, already replace the ic make dryer stop in 5 minit, but after replace it, the pcb make tripping, can u tell what i need to do, thanks in advance
If a capacitor goes is there a chance it’ll get going again? My washing machine is 10 years old and it intermittently stops working. The cost of an engineer / new machine....I’m not sure what’s best x
My twin tube washer spin and then stop i have to use my hand to support thr spin all d time to continue the wash
I suggest you use the contact us page and give me your make and model so I can find the correct literature for you.
I will need the full model number of the identification plate, please use our contact us page and make sure you fill out the request of what part you are after and will get back to you within 24 hours normally www.how-to-repair.com/help/contact-us/
Very good job 👍
Excellent video , nicely done!Thank you.
Good job
Thanks We now have Live Q@A's weekly on our live Show , see our home page ruclips.net/user/How-2-repair for the next date
I bought a bottle of washing machine cleaner. It worked (so far! Touch wood)
When i starts its spin then around 5 mins its stop then i turn off the switch and i on again then its ok again and 5mins again it stop.
I have an electrolux eww1476wd and after doing laundry, it does not want to turn on the dryer heater. the fan that exchanges the air in the drum from the machine turns on, but the heater does not want to. NTC sensors show resistance. the electronics have no mechanical damage and the relays are all OK. Maybe it needs to be reset, but I can't find anywhere how to do it??
It can only be the heater or thermostat bad connections can be a problem or it will be the printed circuit board. This is all that controls the heating system glad we could help you @uroubiparip4662 this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
@@How-to-repair Thank you. When I connect the heaters from the dryer directly to the voltage, then it starts heating the air. I can't find the values of the ntc resistors to monitor the output temperature and the temperature inside the drum. But when the heaters work directly, the dryer finishes the 2-hour program in 45 minutes.
Nice sharing video sir..keep it up
Thank you so much for your helpful videos ;)
Amazing content!
Hi again how-2-repair.thanks for vids great help. i found my problem and its the module board not the control panel, but having difficulty finding parts, as my washer is 16yrs old parts are obsolete, but with watching you vid one of the chips that is blown is a link switch, but turning over the module board there is a S shape black scorch mark and i should say its taken afew more components out aswell as itself, but im prepared to buy and replace the components myself as really cant afford anew washer at moment, ANY help or advice would be VERY grateful.Thanks Matt
muy buen vide0. Muchas gracias por sus video estoy empezando en esto delas lavadoras
Subscribed! I need a new washer and everyone was telling me to 'stay away from electronics', but they all are and I'm a sparky who fixes things. I'd rather deal with this than relays and new shock parts, etc. We'll see.
Sir can we use two separate capacitors in a washing machine instead of single dual capacitor for draier and washing section
I have a problem with my whirlpool washer when I plug it in you hear two clicks but not coming on
Highly brilliant video.
hi , i got a maytag washer 4000 series model MHWE450WW00 that leaves the clothes wet and i saw it shut down when there was 11 minutes left last time. Any suggestions. thanks alot.
Thank you thank you thank your advice worked :)
Brilliant site - great help, many thanks
My washer is GE, was turned on, display door locked after about 23 seconds, I heard one soft click and then door lock released automatically. I have replaced a circuit board and inlet valve and door lock, but the machine is still not working. Pleased hep find it's problem.
Hello. The washing machine starts washing and after 20 minutes, it keeps giving the cold wash light error on the panel, can you help?
Thank u very much,very much informative ✌️
Sir new panel is changed and sensor is changed 2months ago but now suddenly start button on and gets off and the programe won't start beeping sound what to do
Hello, I have a beko 7 series excellence wm, I have gone through the diagnostic cycle and it all corresponds to your tutorial video. However when I then try to use the machine the water runs through the draw as it is supposed to but the water just runs straight through the machine and it does not fill up, any suggestions would be appreciated TIA regards wayne
wayne dawe that’s what’s happening to mine
Thank you so much ,
Where are you staying?
Sir, I owned the lg 7 kg direct inverter front Loader recently before a month. dE 1 error came in between the cycle even the door was locked, and on and off in between and speed is also lower than normal, we replace mother board also, what to do sir?
A while ago on RUclips, you ask me a question about your LG washer. I just thought I’d let you know that I have now made a complete playlist to assist you in any repairs that you ever have.
If it helps, you don’t forget to share it with your friends who may also own an LG.
ruclips.net/video/w5dZ4Pj8Jdo/видео.html
Hi mate I have samsung ecobubble 8kg washer. On some of programs it runs but stops after 15-20 minutes. When I press the pause button on and off it starts again but stops again. When running it makes a constant sound but when it stop there's no sound. Any tips how to solve this problem.
Seen you video on calibration, tried it but no luck.
Intermittent faults are very hard for me to be able to give you a direct answer as I do not have the machine on my workbench. You may have a dry joint or something. It's disconnecting during the wash cycle. I'm sorry I can't be any more help. Have a great Christmas and a happy New Year. glad we could help you @asifiqbal3855 this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
Hi did you find the problem with the washer? Did you fixed? I have same problem now 😢
Now already repaired? If it is fine now, let me know how to repair it or what part is not good.
Thank You, an excellent video!
Hi,I have a Samsung wobble technology washing machine,I'm experiencing frequent stopped and then it turn off for a while,must wait at least 30 minutes to start it again. What are the possible causes for that,any idea
i have a washing maching of a Samsung model wfo700ncw that have only stuck on one program ie cotton, there is no child lock so i wonder what the problem might be.....pls help.
Hello, good day, sir
Pls I have a bruhm top load washing machine, the board turns on but the machine doesn't work, I tried testing the motor separately but it works, but if you turn the machine on and gives it command, it won't work
Pls I need your help
Thank you, sir
I am not very familiar with this model. I’m sorry but do you want to check the door locking mechanism? As if this is not registering that the door is shut? It will not allow the machine to start.
@How-to-repair OK,sir, but I don't know where that is
Thank You sir
I like it 👌
Iam Glad we could help you.
My Ebay Shop rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fstr%2Fhowtorepair&campid=5338676951&toolid=20008
If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel
ruclips.net/user/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
RUclips. ruclips.net/user/Apart4u
Facebook. facebook.com/how.to.repair.appliances
Excellent site 4 a tutorial...
Iam Glad we could help you
Please remember to subscribe to our channel
ruclips.net/user/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
RUclips. ruclips.net/user/Apart4u
Facebook. facebook.com/how.to.repair.appliances
Pablo Pagan binder mahal
Hello,
I have a question regarding my LG front load Direct Drive washer purchased in 2014.
The original board malfunctioned on me and needed replacement.
Before the board blew out on us there was this strange electric burning smell emitting from the washer. At first I thought it might be the heater and or thermistor, but they checked out normal with my multimeter.
I replaced the board recently and started testing the machine with different sized and timed cycles.
The top and rear panels are still detached until testing is completed.
Yesterday I washed 4 loads of 1 hour cycles.
Up through the 3rd load everything was normal, no smells, or error codes being displayed.
After the 4th load chimed, I entered the garage and there was that electric burning odor again, just like the previous time prior to the machine going D O A.
The smell emitted from the Direct Drive motor assembly and the aluminum cover that spins with the assembly was extremely HOTTER than normal to the touch.
Is this a normal thing with these Direct Drive motor assembly?
Should it emit this type of smell?
The last time I smelled this type of electric was when the balast inside my light timer burned up/ Even thought the balast burned leaving a brown mark on the external surface, the timer continued functioning.
Do you have any ideas regarding this issue?
Have you or anyone you know, or customers every mentioned anything regarding this phenomemon?
Any thoughts would be greatly appreciated.
THx
Robert
yes Sir its very very helpful!!! but i dont know how to change capacitor hehehe! but thank you atleast im aware
I'm glad the video pushed you in the right direction I hope you are able to repair your appliance
My LG front loader machine stopped.i replaced the main circuit board and it's still dead. The outlet is ok, because the dryer runs from the same outlet. I paid$240 for that part! I'm pissed, now I'm thinking it's the display controller board
I have kenwood automatic washing machine front load & L:AC apear on display again again what does it mean?
Mine starts then switches off after so long, if left it will eventually switch itself back on and finish the cycle...what could be causing this, it fills and drains fine also mines not a digital but basic front loader...?
might be problem with pcb please remember to subscribe as that's is was keeps this channel going. Thanks 👍
Brilliant job, thanks a lot sir i have just liked and subscribed
Thank you, it helps alot
Hi how-2-repair.
Thank you for your video. I have a question hoping you ca help me. I have a Bosch machine that is not working since one week. I don't know what is the problem and I don't know if it's an error or a piece of the machine. When I choose a program with the door open and then I close the door, the machine tries to put the lock of the door several times (for about 10 seconds) but then nothing happens. The "start" button flashes and I try to activate it but notihng happens. So I tried to program the machine but this time whit the door closed. Again, we hear that the machine tries to put the lock of the door several times but nothing happens and even worst, if I touch the "start" button during the first 5 second, the circuit breakers leap. I thought that it could be the heater or the interference filter but both are ok. Can you help me please??? I don't know if it's just an error of the circuit (even if I don't have an error code on the display). Thank you very much you for your help.
hii there I have a Grundig gwn 48430 cw washing machine that start and then stops after the door look clicks and then stays on wash with nothing happening
'water tank full ' light comes on every few minutes on our Beko condenser dryer. There isn't any water in the tank though. machine will start again but light comes back on, andthe machine stops again.
Hello! I have a Kenmore model 7964027#2900 that turns off after 30 seconds or so whether I put it on a cycle or not, looked at the capacitors on the board, they look ok. the board is different than the one on the video buried in some jell. Anything else I can check?
Please use the Ask paul a question page if you need help and i will reply in less than 24 hours www.how-to-repair.com/help/contact-us/
Dear, I want to ask you that
If light is went out while running washing machine.
When light comes to kya program fir se start hoga ya wahi se hi shut hoga
Mine shuts off then turns back on, it does this a few times but ONLY when I use hot wash cycle, not cold wash.
Disconnect the heating element and check it . It's a bit difficult to test a heating element because at times it shows connection but it's the resistance is not as needed and we don't know the value it's supposed to be. A better check is with s Megger meter but that's costly. It's easier buying a new heating element and replacing.
Our siemens stops, display goes off. After about 15 minutes, the machine starts again where it left off. This only happens occasionally
I will check for any loose connections, and also check if you have problems with the carbon brushes in the motor has intermittent faults can cause all sorts of issues
Many thanks for your advice. The engine is carbon-free. I have checked many connections and electrolytes/capacitors. The problem was gone for several months but now back. I'll try again 🙂 I have a theory that something is overheating. As if, when it has cooled down a bit, it starts again. The subsequent washes have run without problem.
great video , learnt a lot
I have just watched your video on washing stop and starts.I have got exactly the same problem.If i send you the motherboard,can you repair it and send it back to me with your costs etc?Thanks
sorry we dont do repairs as we need the machine to test after
Iam Glad we could help you
Please remember to subscribe to our channel
ruclips.net/user/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
RUclips. ruclips.net/user/Apart4u
Facebook. facebook.com/how.to.repair.appliances