Chillers, Cooling Towers, CHW, CW, Associated Pumping and Chemical Treatment, MRI Chilled Water HX's

[@jrh86]

Very interesting and very well explained including instruction.

[@ISLAHIQALB]

Dear respected sir/mam ,that’s videos about going to be glorious to be an inspiration of hvac:::

[@MR-nl8xr]

Picked up quite a few fact nuggets in this vid; nice job.

[@genegonzalez4713]

There are alot of pertinent information that you guys are leaving out. Most technicians or bldg engineers will get confused, if they are not familiar with the function of a chiller plant design. How can I get a job with Higgins? Iam York and Trane Certified

[@technical4hvac]

Best job

[@Varunkm110]

For clear cut information please share the p&id and with pdf drawings it was nice video

[@genegonzalez4713]

So the pumping scheme is a primary pump system, three pumps all together and one serve as a backup for both chiller pump. Is this a LOAD BASE SYSTEM? OR A FLOW BASED SYSTEM? WHAT TYPE OF CONTROL VALVES ARE YOU USING ON YOUR AHU'S? TWO-WAY OR THREE-WAY?
THE 3 WAY VALVES ARE FLOW BASED, AND THE 2 WAY VALVES ARE LOAD BASED

[@mohitkhanna7813]

Thats pretty well described.
Great job there.

[@fernandohernandez7694]

I want to see him operate the plant (steam/chiller operating) on a emergency scenario. Haha

[@genegonzalez4713]

Yoir main headers seem like 12"-14" or better in diameter. That's alot of flow on the chilled water supply and return pipes

[@humanbeing7995]

sir good job ...add maintenance and operating chiller

[@stevenmercado6666]

great great great video for the novice and advance skills engineer

[@Mr1Blackartist]

Steven Mercado

[@genegonzalez4713]

I don't see the flow switch on The main chilled water header. Did you put a check valve on the rise because often times there is a back flow during pump change or a power glitch and that backward flow trigger the flow switch, causing the chiller to trip and go offline

[@genegonzalez4713]

So this is a Hospital because he mentioned having the plate and frame heat exchanger that cools the MRI UNITS= MAGNETIC RESONANT IMAGE MACHINE

[@tamapisisamipeau6343]

Great presentation

[@genegonzalez4713]

So where is the clinical air and clinical vacuum? It has to be in the mechanical room (engine room)

[@raycbranchjr9976]

He knows what he's talking about

[@mohammadqattawi8911]

could you please explain the hookup for supply & discharge lines showing the recommended distances between the installed fittings thanks ..

[@josevasquez1781]

My tower is a baby compare to the one on this video, but basically same operation and concept.

[@genegonzalez4713]

I have two questions, what's the pumping scheme? Primary only or primary and secondary? Is the chilled water header design a direct return or reverse return? What's your delta T on this system 10°F 12°F or 14°F?

[@corvo1324]

All the piping, maintenance, and water treatment, is it really more energy efficient than some condenser fans?

[@genegonzalez4713]

WHAT BRAND are the chillers? YORK? UNIT COLOR IS GREEN, SO IT MUST BE YORK

[@ajeetsingh9196]

Ohh yeah, it is very good.

[@benh2156]

Excellent video, also how did y'all get Le Chiffre from the new James Bond movies? Lol!

[@mohammadwaseem523]

Can you explains Sir , why primary or secondary or both pumps are VFD controlled.

[@genegonzalez4713]

Question do you have a flow switch for each chiller? or do you have a common flow switch for both chillers?

[@genegonzalez4713]

How can I get a job with Higgins

[@genegonzalez4713]

What's the GPM on the Chilledcwater CKT?

[@muhammadumair8393]

How could air flow loading calculations

[@mdlutforrahmanlutfor3340]

fine

[@rockyhighwayroad7365]

Is this the hospital that kidnbapped the little girl for a year??

[@bababooey7576]

+BTraine Ztraine Yes, she was hidden in the cooling tower.

[@MrInfoPhilly]

What language is he speaking French? Lol