Champion SV150 Lawnmower Engine Tips And Tricks.
HTML-код
- Опубликовано: 6 сен 2024
- For All Spares And Service Items For Your Mowers, I Use And Recommend This Website tidd.ly/47Sy8oT
In this video I show some main reasons why a petrol lawnmower with an SV150 engine won't start. I also show all the springs and linkages and how it all works, plus how to check and set the choke correctly.
Here's the link to the SV150 Playlist
• Mountfield SV150 Petro...
Replace split petrol tank vid • Mountfield SV150 Engin...
Last video • Retro Hayter Harrier- ...
Check out this playlist for 100s more videos like this. • Briggs And Stratton La...
Please support the channel here www.paypal.com...
My favourite lawnmower of 2021 geni.us/5bABm (paid link) As an Amazon Associate, I earn from qualifying purchases
NGK spark plug (most Briggs Engines) geni.us/0B5dS (paid link) As an Amazon Associate, I earn from qualifying purchases
Spark plug socket/remover geni.us/6PUjTjB (paid link) As an Amazon Associate, I earn from qualifying purchases
Spark plug tester geni.us/vwa0
NGK Box of 10 spark plugs geni.us/x0HgA1 (paid link) As an Amazon Associate, I earn from qualifying purchases
Briggs Diaphragm and gasket. Genuine parts that actually work. geni.us/DyxR(paid link) As an Amazon Associate, I earn from qualifying purchases
Briggs governor springs 35 Classic geni.us/sEH1
Briggs 35 Classic Carb genuine geni.us/E4Rn (paid link) As an Amazon Associate, I earn from qualifying purchases
Briggs carb new style geni.us/5ZYWA
SV150 Carburettor geni.us/ELFqcJ
Briggs petrol cap. geni.us/MdCSj0 (paid link) As an Amazon Associate, I earn from qualifying purchases
Briggs Primer Bulb geni.us/o0ARomD
SAE 30 Lawnmower Oil geni.us/AQnvoAY
Briggs Classic air filter geni.us/xGHx
Briggs 35 Classic ignition coil geni.us/LaYz (paid link) As an Amazon Associate, I earn from qualifying purchases
Pull cord rope 100 Metres geni.us/mO4wX (paid link) As an Amazon Associate, I earn from qualifying purchases
Pull cord handle geni.us/PxEif (paid link) As an Amazon Associate, I earn from qualifying purchases
Carb spray geni.us/1PGAI (paid link) As an Amazon Associate, I earn from qualifying purchases
Karcher K2 Pressure Washer
Ultrasonic cleaner geni.us/7tWfGK
Air Compressor geni.us/98Gyqi
Bench Grinder geni.us/rFbPXSc
Blade balancing tool geni.us/t34Mt
Woodruff (Crankshaft) keyways geni.us/EgAoc
Wire Brush geni.us/pEAi
Oil extractor geni.us/qAKBB
Ryobi Impact Driver geni.us/zsPR
Clarke Impact (very powerful) geni.us/jAHzde (paid link) As an Amazon Associate, I earn from qualifying purchases
Clamps geni.us/14Atk (paid link) As an Amazon Associate, I earn from qualifying purchases
100 piece Socket Set geni.us/1BN5otc (paid link) As an Amazon Associate, I earn from qualifying purchases
Screwdriver set geni.us/rza1CI
Magnetic parts tray geni.us/YQXNt
My Video Camera geni.us/diYLt9
WD 40 geni.us/ADykd
Here's a link to my second channel • Get Thick Snow Foam Wi...
Here's a link to my music website stampsound.com/
Royalty-Free Music Provided by Paul Stamp. • Alphatronic- Totally R...
(paid link) As an Amazon Associate, I earn from qualifying purchases
Cheers mate! Been so long since I cleaned a carb. Missus dad passed a while ago and he had an old Sovereign lawnmower. Spent ages getting it started with the step kids watching on. There were tears when it fired up!! Cheers dude!!
Fantastic so pleased for you. Thanks for letting me know
Properly useful videos which gave me a really good laugh. SV150 wouldn't start after running out of fuel, solved after giving carburettor a good clean. Also fixed long-running over revving problem while I was at it. I feel like a real man and have finally gained the approval of my wife and my dad - thank you, you have changed my life for the better.
What was the over revving - mines doing that - can’t see what’s going on - it’s on full revs and tge cable will move the linkages but the governor arm won’t push back to engage the tickover
Had ours since 2009 and only just changed the oil for the first time, it's never skipped a beat.
My Workshop is in Harrogate buddy if your ever passing give me a shout. Just bought my self a Hayter 56 for peanuts to go with my 48 PRO. got a 1959/60 Suffolk Colt too and a Webb push mower.
Good one ... stuck a 35 classic coil on my dad's sv150 mower and it runs so much better 👍👍👍👍👍
Great video's thanks but I have come to a dead end with my XSZ40 mower with the same SV150 engine set up as shown in this video. I've cleaned the carb and changed the spark plug as shown in your other videos. I have also checked that all the springs and links match as shown in this video. The only thing missing is the tiny piece of foam under the small triangular metal "connector" which has the tiny spring. That said, the spring works fine and the parts move smoothly (as per 27:25 and 30:55) so have left it as it is, for now. The issue I have is despite the engine starting okay on the choke lever position as soon as I move it from choke the engine dies. The choke opens and closes okay (as described 40:20). I do however notice that moving the speed knob anywhere between the 'fast' and 'slow' setting does not appear to make any difference in the position of the links and values so am confused how the engine speed is determined if nothing appears to be moving? The governor mechanism appears to be working well, and is not being restricted by the throttle cable
In summary the engine only runs when the lever is on choke, and as soon as I move it forward off choke the engines splutters and dies... Any suggestions?!
Great video thank you. I got my champion mower going after a clean out when I thought I was going to have to bite the bullet and get another. I've had it 6 years and it has been brilliant after buying second hand off gum tree for £30. It looked well used when I got it, but before now all I have had to do is replace the starter pull cord. I did notice there was no gasket behind the carb though, so just ordered one - that explains why there is always fuel on the shell.
Ours is revving high and even higher on the tortoise setting, any suggestions ? also the spring you talk about that can cause up and down revs when you detach the top spring, how do you replace that?
can you do one on adjusting valves please as mine is popping now an then cleaned carb air filter ,woodruff key all ok governor spring new sv150 engine no primer bulb one please thanks
Love the SV & RV150 engines myself.... great work thus far sir. Still watching..... 👍🏻🔧
Equally the LHP16 carbs 👌🏻👍🏻
This one's a beauty tbh!
Just done a video myself so will watch yours as I edit mine.. love an sv rv150 mate
Lol
i use its own power to wash the uderside. You know the plastic bases of say a guineapig cage, i have one of them. Its width of mowers and long to fit 2 in as a size reference. i filll it with water and bit of washing up liquid.
chuck mower in the bath and tilt back a bit, fire it up and then slowly lower and liftand the blade splashes everywhere and really brings the underside shiny again :-)
Good ideas!
hi buddy. i was hoping you may help? i recently purchased a champion lawnmower from a house clearance auction for a service user but it didn't have a grass box. i have since purchased a grass box which looks like the one on yours. it hooks into place lovely but the back plastic flap remains to far in the air to the point it blows grass in my face when i'm cutting with it. my question is are they different types of grass box for these or could they be a blanking type panel missing off the top of my grass box ? the one i purchased has a briggs & straton 35 classic fitted but it has a champion sticker on the front of the deck. its a push mower . any help would be most appreciated bud ;o)
hi i have one of these Champion mowers and its blowing oil out of the filler cap any ideas what could be wrong
Great informational video. Hope you are doing well and staying healthy
Thanks Jonathan you too
As always watched and learnt. Thank you...
Cheers!
Thanks for your help you are good at wot you do keep it up
thanks Dave
Very very helpful !! Thanks
Trying to replace the coil starter unit on this exact model but the pulley cord sticks when it’s all attached. Any suggestions?
Ta for the shout mate .. oh I love an sv lol
No worries Mick this ones a lovely little runner
@@MowerMan lol not got to the end yet.. spoiler alert lol
Great video sv and rv motors are a right pain this one runs good tho
Yeah it's alright AJP ! For once!
Hi Paul,
Great video my man. I have an sv150 on a mountfield hp454. I stripped the carb down and cleaned it all up nice, all linkages are back together as per your video. It took a few pulls to start on choke (obviously once the fuel got through). I adjusted the throttle to full speed and ran it for about 1 minute. It sounded much better. Afterwards it wouldn't start. After I had dinner I noticed there was fuel leaking out the exhaust gasket (I assume I flooded it). Once a mower is warm, what setting should the throttle be upon restart?
Can you help? Recent purchase of a mount field roller mower with 4 speeds for the self propelling, 123 all seem same slow speed 4 is quicker but not much, is there cable adjustment that affects this?
Superb best on the net 👏👏👏
Thanks Thomas
Great video and well explained 👍
Thanks Norms
hj i have the same mower but when runnig it pops i tried fresh fuel and spark plug but still the same any ideas thanks
sehr gut geklärt danke👍
tidy little mower good easy fix for you
Thanks!
I've had a used one for 10+ years now. You're right about the decks being good quality, mine still looks new. The engine is smoking and starting to overheat after around half an hour of usage now though. Do you have any ideas? I've serviced the mower but I'm not sure if the head gasket is getting ready to be replaced? I don't want to strip it that far if it's not. Thank you and thank you for the videos, great content!
Make sure the cooling fins are clear. especially behind the carb
@@MowerMan thank you I'll have a look 👍
Great vid Mower man👍🏻👌
Cheers Ricks!
Any time I get a sv 150 the fuel cap is always cracked 😂👍
@@ricksmowers5094 pants innit
I'm having trouble getting mine to stop. I replaced the brake and micro switch but still not stopping and getting smoke from around flywheel when I do stop it as it getting so hot
I'd swap the coil or at least the kill switch wire to it
@@MowerMan what's the kill switch , the micro switch? Have tested all that with a multimeter.
I said halfords advanced 😊😊😊😊😊👍👍👍👍👍👍👍 I'd recommend some halfords advanced rachet spanners👍👍👍
I know you did! Thanks
I have a Champion SV 150 THAT RACES every time i start it, i have had the carb off twice to clean and checked all the springs with your video, i am at a loss with what to do next. Can you advise. I also have an Atco Quantum 35 engine that will not take fuel from the carburetor. If i put some fuel direct in the piston it starts. Had the carb off three times, but cant find a problem.
Does it race then settle down? Try an ultrasonic cleaner for the carb and make sure no hole in promer bulb if it has one
@@MowerMan it speeds up as you leave it ticking over, the throttle leaver moves on its own but i will take the carb off again and do as you say. Thanks
Totally agree with you Horrible engines.
29:53 What is that thing you move for?
Governor arm
Hi I’ve got a sovereign xss40a v150 engine but when you start it it runs really fast any ideas
check the governor is moving. I show it in this video
fantastic tutorial I don't know how we would manage to service and tune these carbs without your videos. They are a bitch to get right.
i could listen to your voice all day long , whereabouts do you hail from ?
The tiny spring under the triangular plate attached to the throttle disc is either broken or missing on that Champion .As you say the plate should have some sprung return when the governor spring is removed. I wondered if the tiny wire spring below the triangular plate was to control minor oscillations of the throttle plate .
Can you tell me which is the correct governor spring for that particular Champion SV150 . The spring I have been supplied with off ebay is extremely fine and longer and weaker that the one you have on that carb.
Thanks John i'm in sunny Yorkshire UK
Partridge did bounce back but before he did, he drove to Dundee in his bare feet after buying the rights to K-9, the robot dog on casters from Doctor Who...
Say I didn't have a breakdown
@@MowerMan You make me sound mad now...
@@eclectarama The immersion heater? You only need that in if your having a deep bath
Where have you been hiding