Thank you for the demonstration. I use Jaktec machine, i noticed it just stops working when i turn it on wont move at all. Then it start to smell after a little time .I have to leave it for a day to start working again
Thank you for the video. I use direct drive and the tension area is not the same a this one. I don't seem to know how to loosen it. My machine is stitching in loops underneath.
Thanks so much ... I appreciate this video . Please my machine is direct drive two lion. In my area we always have low current which can't carry my machine nd I'm always using power surge or guide before sewing. But once the light goes low, the machine would say erorr E-02. So my question is can i use a big stablizer to help increase the low current while sewing?
Weldone sir,I use two lion industrial sewing machine, the needle hit an heavy metal while sewing on speed, so it got broken and I replaced the needle but couldn't connect with the bobbin thread and I've tried all possible best but yet not connecting with the bobbin thread, what do I do sir
Sorry sir the main purpose of Emel 8500-8900 is for chain stitch which we call straight sewing. You will need additional or an attachment to add other functions to it
Thank you for that demonstration what size belt for a wimsew industrial sewing machine and a belt for the kansani overlocker ks021669z industrial machine and how can l get the pdf instruction for them downloaded thanks
Thanks for watching Sewing machine belt size is either 40 or 42 while overlock is 38. Check my video on how to reduce industrial sewing machine speed you can easily get how to insert the belt
Sir please my industrial machine if I am sewing out will be gushing out from under the plate I mean from the short hool to the needle pls what the problem@@alukosewingmachines3782
Hello Thanks for this video ❤Please I need ur help ,my industrial machine stitches is not tight and I’ve set it to number 2,it was in 3and half initially then I tried to turn it and it’s too hard so I loosed and tighten it bck but now even if I put it in liner 1 the stitches will still not be tight .:.please what can I do
You will do these in steps 1. Turn it to 2 2. Loose the nut 3. Turn the plastic to 5 4. Tight the nut 5. Turn it to the point where the machine Stich is not moving again( these might be on any number) 6. Loose the nut and turn it to zero. 7. Tight the nut
Please my emel machine handle is stiff, i cant move it forward or backward and when i put it on, once i step on it to sew, the handle will stiff and the machine will go off but if i remove my leg from it, it will on again... Please what can I do to solve this problem?
Sir, I wish I could subscribe to your channel 200 times. Pls I want to know what the white switch with on/off on the two lion industrial machine is for?
@@alukosewingmachines3782 thank you so much for your reply, but let me re construct my question and be sure it is still the same answer, the handwheel gets so hard when I try to turn it to pick my bobbin thread. So slightly losing the screw will fix the issue?
I really love 💕💕💕💕 all your tutorials
Thank you
Tnx so much for the video, pls I would like to ask if the handwheel becomes kind of hard after the cleaning
What can I do please
Thank you for the demonstration.
I use Jaktec machine, i noticed it just stops working when i turn it on wont move at all. Then it start to smell after a little time .I have to leave it for a day to start working again
Could the clutch be the issue ?
Thank you for all u do. I tried to see but my needle wasn’t going down, pls what could be the problem 😊
Thank you for the video. I use direct drive and the tension area is not the same a this one. I don't seem to know how to loosen it.
My machine is stitching in loops underneath.
It’s should be the same but please message me on my WhatsApp to I can assist you on it.
Good morning sir
Good morning ma
Thank you for the update, pls sir can you take us on how to do timing on my emel industrial sewing machine. Tank you. God bless.
Ok I will work on that probably before this week runs out or fist thing Monday morning
Thanks so much ...
I appreciate this video .
Please my machine is direct drive two lion. In my area we always have low current which can't carry my machine nd I'm always using power surge or guide before sewing. But once the light goes low, the machine would say erorr E-02.
So my question is can i use a big stablizer to help increase the low current while sewing?
Use it ma
But with the power surge
@@alukosewingmachines3782 Thanks a lot sir..
God bless you
Tnx so much for the video pls I would like to ask, after the cleaning the machine the handle becomes kind of hard
Pls what can I do
Ha. 🙄 the hardness of the machine handle is not related to the change of oil.
These are two different issues
Hello Sir @Aluko, my industrial machine is smelling bad and has started bringing my out smokes, and finally stopped working yesterday
@kippinitreal your clutch motor is burnt
You should have stop working immediately you notice a smell.
@ what do I do pls
You will need to get another one or get a rewire to fix it for you
Weldone sir,I use two lion industrial sewing machine, the needle hit an heavy metal while sewing on speed, so it got broken and I replaced the needle but couldn't connect with the bobbin thread and I've tried all possible best but yet not connecting with the bobbin thread, what do I do sir
WhatsApp please
Make a video on how to do different sewing designs with ont4 EMEL machine, show how to manipulate the different parts to get different designs
Sorry sir the main purpose of Emel 8500-8900 is for chain stitch which we call straight sewing. You will need additional or an attachment to add other functions to it
Blessings dear how to put on a industrial sewing machine belt just bought a singer 120u
Flip the machine and put the belt and Incase the belt is check check my video on how to reduce Industral sewing machines speed
@@alukosewingmachines3782 ok will definitely try when I go home
Blessings it went on
Now i can't string it the thread constantly bursting
@@michellechevannes4175 sorry i can’t get you.
You mean the thread is cutting?
Good afternoon. Please my emel keeps sskipping thread when sewing some fabrics. I have changed the needle to db16 and db18 but its the same issue
Check my video on how to sew any materials
Thank you. Tried it and it worked. I really appreciate it
Thanks so much please how often can i service my machine?
Any time
Thank you for that demonstration what size belt for a wimsew industrial sewing machine and a belt for the kansani overlocker ks021669z industrial machine and how can l get the pdf instruction for them downloaded thanks
Thanks for watching
Sewing machine belt size is either 40 or 42 while overlock is 38. Check my video on how to reduce industrial sewing machine speed you can easily get how to insert the belt
Thanks for this❤️
Just gained a subscriber .
Please what’s the needle i can use for brother’s industrial machine?
That’s for subscribing. Please do share and with your fellow Designers
Needle DB 16 or 18
Please can u do a video on how to set the oil gauge of the industrial machine
Ok we will work on that
Sir please my industrial machine if I am sewing out will be gushing out from under the plate I mean from the short hool to the needle pls what the problem@@alukosewingmachines3782
Greetings, please my newly bought two lion machine is stiff on the handwheel and it's not moving when I match the pedal, what can I do?
Check my video on how to unfreeze.
And it you fell that is not what the problem is message me in WhatsApp please
Thank you Boss
Hello
Thanks for this video ❤Please I need ur help ,my industrial machine stitches is not tight and I’ve set it to number 2,it was in 3and half initially then I tried to turn it and it’s too hard so I loosed and tighten it bck but now even if I put it in liner 1 the stitches will still not be tight .:.please what can I do
You will do these in steps
1. Turn it to 2
2. Loose the nut
3. Turn the plastic to 5
4. Tight the nut
5. Turn it to the point where the machine Stich is not moving again( these might be on any number)
6. Loose the nut and turn it to zero.
7. Tight the nut
Pls sir my new emel is always packing thread under. Even when I thread well and the shuttle is well fitted
Check your machine tension. And did any needle brake recently?
This is exactly the sewing machine I am using but the back thread is loose . I’m thinking it’s the bobbin but I don’t know why to do
Please my emel machine handle is stiff, i cant move it forward or backward and when i put it on, once i step on it to sew, the handle will stiff and the machine will go off but if i remove my leg from it, it will on again... Please what can I do to solve this problem?
Check how to unfreeze Industral sewing machine
@@alukosewingmachines3782 thanks for replying.
But where and how can I check how to unfreeze it? 🙏
Check my page it’s there
Or give me a WhatsApp call
08174520114
Sir please I would like to know how to tension my thread according to thickness of the fabric
Pls what causes the machine to suddenly become so noisy? Emel direct drive
Please message on WhatsApp and send a video of the machine working so I can know where the sound is from
I unfreezed my machine but the needle keep hitting the rotary hook . What shall I do ?
You did not finish the process of unfreezing
Please sir ,I would like to know how to tension my thread according to the thickness of a fabric
I will try and work on this sooner
Sir, I wish I could subscribe to your channel 200 times. Pls I want to know what the white switch with on/off on the two lion industrial machine is for?
It’s for the Light
My machine is cutting thread when I sew please what can I do please
Check my video on it
I have one
Can I do this to tenjoy machine
Yes
You can
I have tried all I could on my machine to reduce the speed but all to no avail. But I noticed it 90MM. What can I do please?
Thanks so much sir
Gett a small pulley for it
Please how can I make the handwheel of my industrial machine free
Loose the screws that hold it
@@alukosewingmachines3782 thank you so much for your reply, but let me re construct my question and be sure it is still the same answer, the handwheel gets so hard when I try to turn it to pick my bobbin thread. So slightly losing the screw will fix the issue?
Check my video on how to unfreeze
pls help oooo, my shuttle handle got broken, am unable to remove the shuttle
Please WhatsApp me ASAP
08174520114
Please my motor is making serious noise what can i do
Record the sound and send it to my WhatsApp
Hi sir can I have a private chat with you
Please do
On WhatsApp
Your phone number please sir
Your WhatsApp number sir