Plot your cutting path and clamp locations using your Haas CNC - Haas Automation Tip of the Day
HTML-код
- Опубликовано: 21 сен 2024
- Have you ever loaded a permanent marker into your spindle to mark a part? This works great, but you better have a box of pens handy, as those tips wear out quickly, and are easily crushed.
In the latest Haas Tip-of-the-Day video, Mark demonstrates how to make your own spring-loaded pen adapter, so you’ll get perfect lines every time. You’ll be able to draw your cutting path on even the largest part, and check fixture clearances to make sure everything looks right before you start machining!
And if you stick around until the end of the video, you’ll see what Mark does for fun, when he’s not programming Haas machines.
Bonus content: www.haascnc.co...
Don't miss any "TIP OF THE DAY" videos. Click here (ow.ly/s28l30mTiUo) to join our email list!
If you enjoyed this video, please hit the like button and share it with a friend who'll find it helpful . . . and thanks!
Follow Haas:
Facebook - / haasautomationinc
Instagram - / haas_automation
Twitter - / haas_automation
Here is the updated link to the bonus content:
www.haascnc.com/video/Video-Bonus-Content.html
Thanks for watching!
I remember first watching this video years ago, before I even had access to a CNC mill. The company I work at just got a VF2 a couple months ago. Today I was setting up a part and checking clearances when I remembered this tip, so I made one of these tools and it worked great. The one thing I did different was I used the fingertip of a rubber glove rather than a party balloon, since those are more common around the shop. I’ve gone back and watched at least a dozen of these tip of the day videos since we got our machine. These tips are still very helpful all these years later.
10+ for the milling joke at 3:24
Norm Macdonald gets the writing credit
Sir you are the best machinest I ever see
Wow! Two thumbs up for this one! A great idea with a huge practical application relative to the cost of making it.
My favorite Haas tip so far! Awesome!
I've done the marker alone and had the problem you described. Thumbs Up for a low tech but neat useful tip!!!
This channel is so great! I never worked with the real CNC and I will likely never will but I love watching this machining-porn. Keep it coming.
You are right Mr. Tomáš Krejčí ; I am a machinist of fifty years of experience. I was a manual machinist for last forty eight years. Due to CNC revolution I am now learning to run and program one of CNC machining Haas center. I am fascinated by possibilities and huge potential to combine my experience with this new machining miracle.
Awesome tip! Thanks, Mark.
I was about to go to the hardware store until I realized I can 3D print all of this lol
How do you 3d print balloons?
Drew Dugger I got those from my party box, I wish I could 3D print those
Is it just me, or that is the most precise whole anyone has made on a pvc cap?
I have never probed one, that's for sure.
Great project.... Now I only need a Haas :S please send me one :P
Great video about a great idea!
I've just finished making the marker! Now, I just have to get myself a Haas to test it...
Hmmm...
nice video, now we know how to draft ourselves a house plan (A 0) without using a photocopier, just make a pen "tool" and use the mill in a cad/cam program, now we just have to put paper on the mill table, and we have a drafting machine!!, brilliant idea :))))
I do this all the time but have never made that cool tool. Thank!
Great tip, shame on me never tought that, really helpful
this trick save me a whole week, I have to machine a part, inspect the part write the number on the part with a markpen and log the number on the inspection sheet, a good thing on my machine at work I got a renishaw prob and a marker pen to do most of my work
Wow, clever trick(s) ! Thanks for sharing !
We use our marker to mark vacuum passages.
I use a 3D drilling operation to select the back side vacuum passages and "drill" from the top side.(Depth set at 0.0" to -0.03" Now I can easily find and hand drill the needed holes. Reference to a vacuum forming mold.
gonna try this tomorrow for some fixture roughing
Thank you!
I just use a drill chuck to hold the marker and don't spin the spindle while running it. Draw away lol
I jog it to the table or part, creep down .001 at a time then jog x or y. When I see the marker line, I set that as my height offset 'n go from there.
As long as you don't ram it into the table or part, there should be no issues with your lines.
Very cool tip. Thanks.
Mark it was you in DMG MORI 2019 season's greetings video!!!:)
pure genius!!!as always...ty so much!!!!
Thanks for the great comment jenacbxx!
Fantastic tip, thank you!
Based and balloon-pilled. Whoever thought you could turn a CNC machine into a plotter?
thumbs up
very ingenious
im really tired folks trying to sell for 300 dollar a marking pen adapter
thank you to sharing with us
Very Cool, This channel has great tips!
That's to funny, showing a machinist how to drill a hole!! Still a great tip.
Not everybody was born with years of experience. Seems simple, yes, am I gonna use this? Probably not. Could it be another intellectual tool? yes.
did you have to program a tool path for each of your clamps first? (and them remove them from the program before machining)? not sure how the machine knows where the clams are.
Awesome 👍 It helpful in my diy plotter
Super tip! Thanks !
Well, I see a small project in my very near future.
Also, probably a balloon animal.
Completely awesome 👍👍👍
Great tip!!!!
I doubt that those who use metal cutting centres really need bom to build such holders.
I wonder though if 30k rpm will shatter the marker . there going to be lots of paint on walls :)
Thanks you for the tips ^.^
hmmm it might be helpfull someday, thanks. :)
brillian idea
Great job Mark. Where can I find a school in Reno, Nevada that teaches these tricks? Thank you
Genius.
Wow this is great however Its worth noting that Coolant flow should be at least 1:10 ratio of Gallons per hour to spindle RPM But no more than 1 gph: 5 Srpm. I hope this helps.
Off to the hardware store.
Brilliant
That's cool but it seems like a bit much for drilling flanges, let's see some tips on lathe work!
I just watched another video where a guy used a foam earplug, instead of the balloon, as a spring.
Can you post the program rather than the BOM?
Awesome
Interesting !!
Clever.
where can I get that mark lubrication 😂
Superbbbbbb.....
Been doing this for years, you dont need the fancy holder. This technic works great for vacuum chucks also.
What do you mean with fancy holder?
@@fireworm91 i mean you can simply put the sharpie in a 7/16 or 1/2 inch collet and touch it off. Theres no need to put together the pvp pipe and the balloon to run the sharpie.
😊
It looks like the grinding wheel needs dressed up..
0.33 boss would say noh take too much time
😊😊😊
I cant feed with 0 rpm...
please I'm new to milling CNC machine and I really want to pick up job in this regard.help me thanks Johnson from Nigeria.
He bought a bag of balloons at the dollar store for........................... you guessed it, a dollar.
how to make a very expensive printer with only a CNC mill
100,000 dollar machine. I got these balloons at the dollar store
I ve quit watching porn because of you Mark 3:) thank you
It's a Tommy gun🤓
Now I am pissed that I work on a lathe :X
If its a live tool lathe with a Y axis, I bet you can do the same thing.
If not, you can color your entire work piece black.....
It is live with Y but we only do spline milling and keyways to pre machined stock.
i actually needed that but leave the jokes to funny people
Anyone else get a headache looking at that grinding wheel
ok
LOOOL - oookay ^^
Oh the jokes write themself at 0 rpms.
Russian hacker on HAAS channel, keul
You always refer us to the "bonus material" at the end of the videos, this is not helpful to us who watch your videos on IOS devices... You can't successfully click on the bonus material banner because nothing happens except give you an option to pause the video. Can you start including the links on the video description until RUclips / Apple come up with a more user-friendly APP? Thanks.
That is a non-helpfully reply. Don't let your personal opinions weight into a functional question.
(Android user through and through, not a fanboy!)
Можно задать в обычную цангу ER32-... ( какой у вас маркер)!