Hello! This is our own product, the product is expected to be available on Amazon in mid-December, you can search YEEHUNG to check it out then. Thank you!
Hi Friend. Please can you let me know how do I get the Screen cast tickbox like here 13:38? On my screen this option is not there. Please help me as I have purchased your dashboard and would like to connect dashboard to screen
Friend. I know you purchased mine not our dashboard. Because we don't sell it yet. I can answer for you. Each manufacturer has a different decoder for their dashboards, so if you need the ability to cast the screen, check with the appropriate manufacturer to see if they have it. You most likely will not be able to use our decoder for screen casting. Because it's paired with our dashboard is used. Hope this helps.
Ok friend. The person I purchased the dashboard sent me this video to show how to install this why I thought it was your dashboard. I installed the MS9120 app and also fitted the dashboard following these instructions. The only part I am stuck is I do not have the tickbox option for Screen cast
@@DQJLONDON Friend, it's okay. Screen casting function requires a DISM box, this is the manufacturer to equip you with, if they do not support, that is no longer available, you need to connect a box, you see our video inside the connection to this box. One more thing, only Android screens support this feature.
Yes friend I have new 12.3" android screen install with the new digital dashboard. I have looked at this video and I have everything the same. All the cables and also the HDMI to USB adapter etc. Everything I have is the same. Even the MS9120 app is the same. The only thing that is not the same is the Screen cast tickbox 😥
@@DQJLONDON After connecting the box, you have to press the steering wheel button to the navigation position shown. Inside the dashboard function, check the navigation function and press once to use the Projection function. That's why you don't see the cast screen function. Hope this helps.
@@abdelkaderboussaid2297 7:12 This is the time to start removing the stock dash cable jacks and replacing them with the LCD cable jacks to start the docking process. The principle of their transmission is via cable adapter. After swapping the sockets, the original cable goes directly to the socket on the new LCD screen's socket, and then a portion of the adapter goes to the socket on the original motherboard. Is this explanation understandable.
@@YEEHUNGElectronics yes thank you ! and about the middle screen on the original dashboard, no need ton remove it or the piece under it ? you can just lay the mother board on the new cluster ? not affecting features or fonctions ?
@@abdelkaderboussaid2297 You're welcome! Q:and about the middle screen on the original dashboard, no need ton remove it or the piece under it ? A:Yeah, no need. Just need to remove the left and right mechanical gauge pointers. Q:you can just lay the mother board on the new cluster ? A:Yes, just put it on top. Q:not affecting features or fonctions ? A:By connecting an adapter cable, the new LCD dashboard's has the functionality of the original mechanical gauges.
Hello, your channel is very interesting, can you please tell me which website you got the digital watches from ? 🎉
Hello! This is our own product, the product is expected to be available on Amazon in mid-December, you can search YEEHUNG to check it out then.
Thank you!
Hi Friend. Please can you let me know how do I get the Screen cast tickbox like here 13:38? On my screen this option is not there. Please help me as I have purchased your dashboard and would like to connect dashboard to screen
Friend.
I know you purchased mine not our dashboard.
Because we don't sell it yet.
I can answer for you.
Each manufacturer has a different decoder for their dashboards, so if you need the ability to cast the screen, check with the appropriate manufacturer to see if they have it.
You most likely will not be able to use our decoder for screen casting.
Because it's paired with our dashboard is used.
Hope this helps.
Ok friend. The person I purchased the dashboard sent me this video to show how to install this why I thought it was your dashboard. I installed the MS9120 app and also fitted the dashboard following these instructions. The only part I am stuck is I do not have the tickbox option for Screen cast
@@DQJLONDON Friend, it's okay. Screen casting function requires a DISM box, this is the manufacturer to equip you with, if they do not support, that is no longer available, you need to connect a box, you see our video inside the connection to this box.
One more thing, only Android screens support this feature.
Yes friend I have new 12.3" android screen install with the new digital dashboard. I have looked at this video and I have everything the same. All the cables and also the HDMI to USB adapter etc. Everything I have is the same. Even the MS9120 app is the same. The only thing that is not the same is the Screen cast tickbox 😥
@@DQJLONDON After connecting the box, you have to press the steering wheel button to the navigation position shown.
Inside the dashboard function, check the navigation function and press once to use the Projection function.
That's why you don't see the cast screen function.
Hope this helps.
Hello.
Does it work with your new Qualcom 685 Android srceen? Do you have a link where to buy it?
Works with the new 685 chip Android screen.
Here's the link:
www.pempcar.com/products/w205-x253-digital-cluster
You can check it out first.
Hi do you sell this for 2017 GLE 350 4matic Mercedes Benz. Thank you
There is no LCD dashboard adapted to this car yet.
hello
when you install the mother board into your lcd dashboard, there is no connection ? no cable link ?
Hello!
You can watch the after video.
We use a harness adapter to establish a connection between the motherboard and the LCD display.
what time ?
because it seems like you juste lay of the motherboard of the original dashboard inside the new cluster with no connection betwin them
@@abdelkaderboussaid2297
7:12
This is the time to start removing the stock dash cable jacks and replacing them with the LCD cable jacks to start the docking process.
The principle of their transmission is via cable adapter.
After swapping the sockets, the original cable goes directly to the socket on the new LCD screen's socket, and then a portion of the adapter goes to the socket on the original motherboard.
Is this explanation understandable.
@@YEEHUNGElectronics yes thank you !
and about the middle screen on the original dashboard, no need ton remove it or the piece under it ? you can just lay the mother board on the new cluster ? not affecting features or fonctions ?
@@abdelkaderboussaid2297 You're welcome!
Q:and about the middle screen on the original dashboard, no need ton remove it or the piece under it ?
A:Yeah, no need.
Just need to remove the left and right mechanical gauge pointers.
Q:you can just lay the mother board on the new cluster ?
A:Yes, just put it on top.
Q:not affecting features or fonctions ?
A:By connecting an adapter cable, the new LCD dashboard's has the functionality of the original mechanical gauges.