How to unbrick Huawei honor6x/GR5-2017 (boot-recovery-fastboot/Problem)

Поделиться
HTML-код
  • Опубликовано: 20 авг 2024
  • how to unbrick an Honor 6x, it does not boot up and does not enter recovery mode or fastboot mode
    It just reboots continuously
    How to unbrick Huawei honor6x/GR5-2017 (boot-recovery-fastboot/Problem)
    =========================================================
    Please don't forget to subscribe to my RUclips channel
    www.youtube.co...
    ✔ Facebook :
    / flash-soft-11196015683...
    Email: jw1@hotmail.fr
    لا تنسى الاشتراك في القناة وتفعيل زر الجرس ولا تنسى وضع تعليق أو استفسار وشكرا لك .
    #honor
    #HUAWEI
    #MI
    #honor6x #unbrick #HUAWEIFRP
    Bypass #ADB #FRP lock on any #Huawei
    huawei unbrick tool
    huawei usb com 1.0 unbrick
    huawei unbricker
    unbrick huawei 6x
    unbrick huawei 6x
    unbrick Huawei honor6x
    unbrick Huawei GR5-2017
    no boot device
    no boot device huawei
    huawei power brick
    handset windriver huawei
    Huawei honor 6x
    Huawei honor6x info
    huawei erecovery
    erecovery huawei
    getting package info failed
    huawei erecovery getting package info failed
    getting package info failed huawei
    huawei erecovery failed
    huawei erecovery emui
    getting package info failed huawei erecovery
    huawei erecovery starting wifi failed
    erecovery huawei p20 lite
    huawei erecovery p10 lite
    erecovery honor
    erecovery getting package info failed
    huawei erecovery getting package info failed solution
    huawei erecovery p9 lite
    huawei erecovery package info failed
    huawei erecovery p9
    erecovery emui
    huawei p20 lite erecovery
    huawei erecovery tablet
    huawei erecovery emergency backup
    erecovery huawei failed
    huawei erecovery shutdown
    erecovery huawei p20
    erecovery huawei p30 pro
    huawei firmware upgrade
    updating huawei phones

Комментарии • 39

  • @Joreg_Catapang
    @Joreg_Catapang 2 месяца назад

    Finally after a full 9 months I finally flash it, All those months of trouble shouting the freaking battery was so empty that the flashing software not works
    I manage to charge the battery buy using my old Huawe Y7 Prime and pug the battery from the gr5, The connector is same so thats why its works
    the y7 prime battery was dead and not works thats why I cant put it in my gr5
    Thank you very much for the firmware

    • @SoftFlash
      @SoftFlash  2 месяца назад +1

      I'm glad you solved the problem
      thanks for your comment

  • @praveensingh4022
    @praveensingh4022 3 года назад +1

    Thanks sir

  • @ravimakwana1912
    @ravimakwana1912 Год назад

    Thank you

  • @khaledkaram5362
    @khaledkaram5362 3 года назад

    عمل جيد اخي

  • @khaledkaram5362
    @khaledkaram5362 3 года назад +1

    كنت اريد المساعده اخي بالله عليك بخصوص هاتفي بوكوفون اف 1 الجهاز قفل بعد ما كنت بنزل سوفت وير قديم miui 10 وبعدها الجهاز معلق دائما علي وضع الفاست بوت والبوت لودر مقفول وجربت طرق كتيرررر جدا حتي وضع edl وفتحت الجهاز لكن مش مع البرامج الي بفلوس والمشكله في وضع edl مكان النقطقتين اتخدوش كتير بقت من الصعب ان ادخل وضع edl بصعوبه فهل في طريق لاصلاح الهاتف وله خلاص استستلم لوضع الهاتف انتهي

    • @SoftFlash
      @SoftFlash  3 года назад

      مرحبا نعم تستطيع اعادة هاتفك للعمل فقط قم بالدخول الى وضع edl
      ثم عمل فلاش حديث له
      يجب ان يظهر
      Windows Device Manager
      Qualcomm hs-usb qdloader 9008 com!
      متابع معك ابلغني بالنتيجة

  • @anjumarora3946
    @anjumarora3946 2 года назад

    my phone stuck in fastboot rescue mode please help honor 6x bln-l22

  • @hovu8130
    @hovu8130 2 года назад

    thanks sir :3

  • @HariSankar.007
    @HariSankar.007 2 года назад

    Bro what to do after oeminfo flash
    Phone didn't turnon into orginal os what to do

    • @SoftFlash
      @SoftFlash  2 года назад

      I have uploaded a lot of tools and they support backup oem huawei
      ruclips.net/video/2WFxzhsJcL0/видео.html
      ruclips.net/video/aYDqbblKadE/видео.html
      You can use adb command without tools

  • @1nico996
    @1nico996 2 года назад

    Hey, I allways get Error (39). Do you have any idea what to do?

    • @Joreg_Catapang
      @Joreg_Catapang Год назад

      You doing it wrong
      You need to open the phone back cover then in the video the guy show how to short some pin point
      Here you need tweezers to short the pin
      While shorting the pin you need to plug the phone in computer or laptop and the error while not appear
      The easy way is plug the phone then the other and is plug it while holding the pin

  • @twity1111
    @twity1111 2 года назад

    السلام عليكم احتاج ملف gr5 2017 boot.img من اجل عمل روت بعد فكل قفل البوتلودر ببرنامج magistic

    • @SoftFlash
      @SoftFlash  2 года назад +1

      مرحبا انت لم تكتب مديل هاتفك بشكل جيد هل هو Huawei GR5 2017 BLL-L22
      لو انت مثبت ريكيفري twrp
      تستطيع سحب ملف البوت من هاتفك وعمل له باتش أو يمكنك تحميل الروم
      www.mobilewithdrivers.com/download/firmware/huawei-gr5-2017-bll-l22
      ثم Magisk Manager
      Patch Boot Image File

    • @twity1111
      @twity1111 2 года назад

      @@SoftFlash شكرا لك اخي على الرد السريع موديل الهاتف هو bll-l21c18cb386 قمت بعمل فك البوتلودر ببرنامج potato nv لكن عمليت تركيب الركوفري twrp لا تتم ببرنامج adb platform tools . ماهو البرنامج الذي اسحب به الروم من الهاتف وهل هو مجاني؟

  • @Joreg_Catapang
    @Joreg_Catapang Год назад

    the idt tool keep force clossing after pressing play can you help me

    • @SoftFlash
      @SoftFlash  Год назад

      Did you run it as administrator ?

    • @Joreg_Catapang
      @Joreg_Catapang Год назад

      ​@@SoftFlash I reset my windows and it fixed the problem of idt and now the problem is it always disconnect in testpoint mode I dont know why and I will get the error 5 after 36 second

    • @SoftFlash
      @SoftFlash  Год назад

      @@Joreg_Catapang 1- Battery fulled and power off, phones back cover removed carefully and reached the mothet board. Testpoint pin founded.
      2- qualcomm/mtk drivers installed
      3- USB-A side plugged to PC and USB-C side is waiting
      4- A conductive metal tool (mine is pointed tweezer) grabbed and shorted to pin to metal ground and I keep them so.
      5- While keeping the testpoint shorted, plugged the USB-C side to phone and waited couple of second.
      Make sure to use an original or good quality USB cable
      Some problems can be solved with modified cable by using 10k resistor between on red and green wire
      USB

    • @Joreg_Catapang
      @Joreg_Catapang Год назад

      @@SoftFlash I will try this but Im pretty sure is the battery is drain because the device is been seating in drawer for 5 months already then I try flashing this in drained battery, that's why I guess I get the error 5
      Thanks for helping me

    • @Joreg_Catapang
      @Joreg_Catapang 2 месяца назад

      I manage to flash it finally My only problem is how to flash the oeminfo

  • @tabranielc
    @tabranielc 3 года назад

    Help me bro my Huawei y9 jkm-lx2 stuck on erecovery and when i charge automatic turn on fastmode

    • @SoftFlash
      @SoftFlash  3 года назад

      Download Flash Rom and follow the video explanation
      Build: JKMLX2 901162SP59C636E1JKMLX2C636E1B162SP59 901162JKML22C636E1B162SP59 901162
      Size: 2.29GB

    • @tabranielc
      @tabranielc 3 года назад

      @@SoftFlash where i can find that software?

    • @tabranielc
      @tabranielc 3 года назад

      @@SoftFlash how to download it can give the link

    • @SoftFlash
      @SoftFlash  3 года назад

      @@tabranielc huawei-firmware.com/rom/huawei-y9-2019/jkm-lx2/45542

  • @kayceeavila5575
    @kayceeavila5575 3 года назад

    my phone stuck in fastboot mode what should i do?

    • @SoftFlash
      @SoftFlash  3 года назад

      What is your phone model?

  • @Joreg_Catapang
    @Joreg_Catapang Год назад

    Im getting error code 5

    • @SoftFlash
      @SoftFlash  Год назад

      ruclips.net/video/baF-Ja6nLzg/видео.html

  • @rodrigoavilamendoza7601
    @rodrigoavilamendoza7601 3 года назад

    Hisilicon Kirin fig-lx3😊

    • @SoftFlash
      @SoftFlash  3 года назад

      necesitas
      Rom Board huawei FIG-LX3
      Luego use el mismo método en el video o use uno 'BOX' el trabajo de Flash Offline XML
      drive.google.com/u/0/uc?id=10lXNlI3YtJSBOWcYexpaQ560dHeEeU4X&export=download
      Este es un flash pagado
      buena suerte mi amigo

  • @rodrigoavilamendoza7601
    @rodrigoavilamendoza7601 3 года назад

    Hisilicon Kirin

  • @AdbhutGyanByOsho
    @AdbhutGyanByOsho 3 года назад

    Thanks sir