Troll Bridge - The $4,000 Diesel F350 Hauler Build
HTML-код
- Опубликовано: 19 сен 2024
- What does a Kubota tractor, a Jeep Grand Cherokee, and a troll bridge have in common? Well Today we are going to find out as we build this $4,000 Ford F350 into a crawler hauler to get us to the Offroad Games in Utah.
#trollbridgeford
#mattsoffroadrecovery
@MattsOffRoadRecovery
#OffroadGames
*********************************
Like this video? Check out these:
*Troll Bridge F350 Ep1: • Troll Bridge - The $4,...
Cheap F350 Major Problems Ep2: • Cheap F350 has Major P...
F350 to Utah or Bust Ep3: • Will The $4,000 Ford M...
*********************************
Get 20% OFF ONX GPS Maps: Enter code “bleepinjeep20” at checkout
Get 15% OFF Adam's Driveshafts: Enter Code "BLEEP15" at checkout
Get 10% OFF PowerTank: Enter Code "Bleepin PT" at checkout
Get 10% OFF Barnes 4WD: Enter Code "bleepinjeep" at checkout
Get 10% OFF Iron Rock Off Road: Enter Code "bleepinjeep" at checkout
Get 10% OFF Bullet Point Mounting Solutions: Enter Code "bleepinjeep" at checkout
Get 10% OFF EZ Flate: Enter Code "BLEEPINJEEP" at checkout
Get a Free Pre-Filter for Thor Cowl Intake: Enter Code "BLEEPINJEEP" at checkout
See all BleepinJeep Discount Codes at: bleepinjeep.co...
*********************************
If a BleepinJeep video has ever helped you consider returning the favor by:
• Supporting us on Patreon here: / bleepinjeep
• Becoming a Member here on RUclips: bit.ly/2wGeSec
• See what we recommend on Amazon here: amzn.to/2kc6Syn
• Buying a T-Shirt Here: www.bleepinjeep...
• Or Just leaving a kind comment on FB here: / bleepinjeep
*********************************
This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.
What does a Kubota tractor, a Jeep Grand Cherokee, and a troll bridge have in common? Well Today we are going to find out as we build this $4,000 Ford F350 into a crawler hauler to get us to the Offroad Games in Utah.
*********************************
Get 20% OFF ONX GPS Maps: Enter code “Bleepin20” at checkout
Get 15% OFF Adam's Driveshafts: Enter Code "BLEEP15" at checkout
Get 10% OFF PowerTank: Enter Code "Bleepin PT" at checkout
Get 10% OFF Barnes 4WD: Enter Code "bleepinjeep" at checkout
Get 10% OFF Iron Rock Off Road: Enter Code "bleepinjeep" at checkout
Get 10% OFF Bullet Point Mounting Solutions: Enter Code "bleepinjeep" at checkout
Get 10% OFF EZ Flate: Enter Code "BLEEPINJEEP" at checkout
Get a Free Pre-Filter for Thor Cowl Intake: Enter Code "BLEEPINJEEP" at checkout
See all BleepinJeep Discount Codes at: bleepinjeep.com/member-discounts/
*********************************
If a BleepinJeep video has ever helped you consider returning the favor by:
• Supporting us on Patreon here: www.patreon.com/bleepinjeep
• Becoming a Member here on RUclips: bit.ly/2wGeSec
• See what we recommend on Amazon here: amzn.to/2kc6Syn
• Buying a T-Shirt Here: www.bleepinjeep.com/store
• Or Just leaving a kind comment on FB here: facebook.com/BleepinJeep
*********************************
*This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.*
Josh can fix it. After watching the videos, I think Josh can fix anything. With that being said, Josh. I've got this problem that..., lol!
Josh is a very resourceful guy! He’s going to get it working, I don’t doubt it for a second
That will be a really nice hauler truck once you guys get it fixed up! Nice find Josh!
Years ago I saw a portable frame straightening guy use a plumb bob that he hung from certain points of the frame and he drew chalk lines on the concrete floor to determine the diamond in the frame. Of course he has books that provided the frame specifications and locations to measure from and to etc. Most of the measurements were angular or cross measurements to get the actual frame square and level via the plumb bob. I'm sure there was much more about his methods but he got the diamond out of the frame and all points were leveled and other measurements were the wheelbase on both sides as well as the track of the rear wheels to the front and thrust angle. Interesting work.
I've seen measurements like that in factory service manuals. Caulk/marker on a garage floor and a plumb bob/laser is a great way to turn something complicated into an easy to measure 2D shape.
Once you know where the short cross dimension is the porta-power can push it out.
Yeah it was nice when I had a frame machine to work with...but tractors and bridges work too lol
Great job Matt n Josh. Better weld up some supports to that frame if gonna be towing heavy loads as the metal is somewhat "softer" now. Sweet deal if can clean it up nice
I love your frame machine.
Should be able to get frame dimensions from Robbie Layton..use the back hoe part to pry over the frame after its tied to the Bridge..to the Tree..to the Jeep....swing the bucket and "Smack" it Good..Lol 😂 😅
a level slab and 8 jack stands that are the same start from front and work your way back you will plainly see the damaged area
good idea, is the frame supposed to be level from front to back though?
frame rails should be straight front to back but they may bee straight at different heights lol when you get out to Utah have Robbie Leighton put it on his frame machine or at the very least give you the frame measurements @@bleepinjeep
Make sure you have the same rims on both sides or measure off the outside of the axle. Who knows if he didn't throw an odd tire on the damaged side
hmm, good thought
Keep up the good work
The easy start would be removing the outside dual tire so both sides are the same. Then, set a strait edge on hubs to measure the axle front and back. That will have to be after matching up leaf springs and mounts.
I have full faith that Twisted will make the games
This is going to be an awesome hauler. 😊😊😊
Heck yeah this is going to be a good series
I love your style of creative problem solving!
I always believe everything can be fixed. But the equipment being used is straight up hillbilly. Love it.
we are what we are!
I went and finally got me a new winch setup and a new lift kit for this other truck I just got to play around in. I took your advice I'm going to try out the synthetic line it came with and eventually get me a freedom winch line I've never tried the synthetic in my life all my other winches have the steel cables. It's crazy to think that this little rope the size of my finger or thumb can drag out my whole Silverado.
synthetic is actually stronger than steel, and safer too
@@bleepinjeep oh yeah I have seen it in action in your videos and once on the trail. I tried it out after install like it a lot so much easier to deal with as well gonna have to change over all my steel to synthetic line
I found that frame shops are pretty reasonably priced. Had a Jeep straightened for $700 a couple of years ago. The front was knocked 4" off to the side.
what? not just jeeps but a superduty too? woot!
Hey Josh, good to see you vaping instead of smoking cigarettes. I did the same thing a several years ago, but then I bought a single package of nicotine gum at Walmart and it helped me completely quit nicotine for good. I'm a year and a half clean and it was actually a very easy thing for me to do.
I smoked in my early 20's and now I'm 40 and haven't touched a cigarette in 10 years or so. My girlfriend at the time (wife now) didn't want to be with a smoker and I was willing to give us killing myself, so she changed me in a positive way. I had quit previously because I was doing a lot of mountain biking but picked it back up until I met her.
What worked for me is making new habits so I didn't fall into my old ones. It's like hitting the frame with a sledge while it is under pressure to change it's shape. I needed a shock to my behavior to make the change stick.
Thanks...yeah I gotta quit vaping now too...I'm not convinced it's "healthier" than smoking. I was doing good with the nicotine pouches but they started giving me heartburn
It's called stagger. The truck will turn better in one direction!
13:38 you correct Josh then misspell diesel. 🧐
Take the truck to Matts shop where you have his lift. Or go to junk yard find truck that has a good frame in the back. Cut it off bring it to Matts shop. Then cut off bad frame and weld other frame to truck. Problem solved. Thanks for the video guy's. Hey Matt what is goin on with your dads truck ???
Its just about done, I think we have 2 more episodes and then I'm waiting until April to unveil it. Theres more behind the scenes photos and content on Patreon if you are interested.
@bleepinjeep YesI became a member ,thanks Matt
I am surprised the frame did not twang back into shape after cutting the hitch
That's some hillbilly stuff if Ive ever seen it!
I can't believe you guys are measuring off the ground and there are two different springs, you're chasing your tails
Go to the junkyard and get the back half of a good frame. I know older rangers are 2 pc frames. Just cut out rivet's and reweld. Or get the entire back half of another front wrecked truck. That way you know the frame is straight and it will track straight down the road with a trailer. Also you could decide to f-250 swap it with a SRW axle and bed and not a dually if ya wanted.
No way 2 piece frames? Thats cool. Ill have to research how those are designed and fit together 👍
I have a line on a nice rust free frame. Not gonna happen before we have to leave, but in the future. Just trying to get it on the road for now
Only 10 thousand allowed so check on tickets for the off road games before you just show up.
yes, do buy tickets beforehand!
Somebody’s on the hunt for a Dana 80 ! Backyard hackery makes for a good video.
It looks like the tube may have pulled out of the housing slightly. I'd try to straighten it first after making sure it is bent with some measurements or an axle alignment bar.
Let's go do some sketchy stuff, doo daa doo daa, let's go du some sketchy stuff doo daa doo daa dey!! I love you guys!! Thanks for sharing!! I would get a good half of a frame at a salvage yard, instead of doing all the sketchy stuff. Anyways, I am sure this will be a beaut when she's done! Thought I saw a Freemason sticker up in the left corner of the back window. That's a guarantee for the truck beeing haunted. I am a freemason myself, and we are scary!!! 😁 Good luck!! Best regards from Roy from Norway!!
lol, Freemasons in Norway? learn something every day!
Score! Is this gonna be new crawler hauler after Games or is this one for Josh? I need to buy a trailer soon. Have fun boys, ill be watching for ya 👍🏻
this is Josh's crawler hauler
@@bleepinjeep awesome! Go Josh!
Vroom vroom! Gotta be able to go riding outside of windrock!
👌🏻 exciting
Bridge over troubled waters.
Lol ,why didn't you bring it to Layton Autobody? Should have brought it to Mr. FANCY PANTS ROBBY. LOL
Hey Matt!
Didn't you say the block on the passenger side is taller than the block on the driver side that would make it look like the frame is twisted
Does Josh live close to you? Do yall film every day or just certain days?
not super close, we work at least 5 days a week and film a lot of it but some days things around the shop are just not too exciting to film
First perform an exorcism!
To be honest buy new shackles, perches, bolts , and bolts and go from there.
First thing you should do is sell it and get you a Ram 25 or 3500
And have transmission failure issues?
Yeah it's a FORD
Just take it to a frame shop and be done with it..... just saying
I can’t believe you paid that . Depends on the mileage. But could be a great parts truck. But not a fixer upper
It's a fixer upper....good engine and trans. I looked pretty hard and couldn't touch a 4x4 dually diesel in good condition around here. It'll be a good truck...have some faith :)
A laser level somewhere makes a great reference point just have to know how to set it up well. Get a hold of that Robbie Layton guys phone number he may have some great tips.
cut off the back half or get new frame
I found a big tree with an exposed big root an tied my truck down
It's spelled axle😉
I'd make a call,
Layton auto body does stuff,
He has a frame stretcher, flatbed designer and a painter booth.
🤪🧐
Yep....he's also 30 hrs away. We got this ;)
$4k seems a bit steep to pay
Y’all should just go to the junk yard and find a used frame and change it.
4 grand!! A couple more and got one that was fine. That’s a parts truck
👌✌👍☕cz
Robbie Layton can fix it for yall...
4 grand for a wrecked truck?? Y’all are getting scammed, I’ve found a couple 350s on Facebook up in Indiana for less than that not wrecked just needing a transmission or some slight work
an F350 diesel dually 4x4 quad cab with the 7.3L powerstroke? I think not
And if you get a wrecked truck....it was running and driving. "Just needs a transmission" can turn into a nightmare. Not that a wrecked truck can't. We can bend metal though.
The audio was horrible in this video
The audio wasn’t bad at all. Maybe replace your blown speakers? 😅
Your content is sooooo much better than colts. Love your channel for sure.
Ill bet he threw a leaf spring set with block off a different truck on there to get it moving