Dang late again lol you always post when I'm in school. I shared this with my friend because he used to just buy new mags but now he can fix it. Plz do a tutorial on how to clean and take apart a pistol mag, I have seen to many times people at a field that take there mag apart and loose a piece or do it wrong and break it. Please and thank you. Love the vids
My the spring on the feeding lip that keeps the bbs in is hanging out and i dont know if i can fix it or if i have to biy a new one, do you have any idea or advice on how to fix it?
I just bought a brand new Krytac trident mk2 crb m and I’ve noticed it shoots fine until there are about 5 bbs left then they literally fall out the barrel. Any tips?
What magazine are you using? Sometimes midcap mags with extended follows can push the BBs too far into the chamber due to the spring pressure. Also, if it's a new gun, adjust your hop up and that may solve the issue if it isn't closed up enough.
hey my mid cap mag doesnt work, basically i load it up as usual (its a m4 mag and i use it with my g36c with m4 mag adapter) i put it in my replica and all the bbs insatly shoot into the barrel, i can shoot once and then the bbs dont come out and i have to shake the gun so they fall out they're brand new
Can anyone tell me why my bbs are double stacking and causing blockages? By double stacking i mean 2 bbs sit in the feeding tube and look like a figure 8
Hey BB warrior, I'm having trouble feeding heavy BBs in my Krytac 150rd mid caps. Feed great with .25 but .28 seem to skip a lot about half way through. How can I add spring tension without having to worry about aftermarket compatability?
There's several things to test for if you haven't already, including setting your hop up to "zero" and shooting to see if the issue persists. Something that may be helpful if the Krytac mag has clear externals is to remove it from the shell and watch it release the BBs. If there's a place it's snagging then check for anything it could get stuck on and lightly sand it. I've also heard of people physically stretching their springs to help, but YMMV and I'd only test it on one mag first. All this is based off the assumption the different weight BBs are the same brand, because that can be a common issue. If these basic tips don't work, feel free to join my Discord or add me on instagram and I can help troubleshoot further.
@@TheBBWarrior Thanks! And yeah, I've done most of this troubleshooting myself. Nothing seems to be wrong with any of them. I just find it a bit odd that my high caps feed flawlessly, and all my mid caps seem to stop about half way through the mag. (Gun is my Krytac Trident, BBs are Elite Force .28s, and the mags are Krytac mid caps and Lancer Tactical 300 round high caps) and the high caps are perfect, which leads me to believe it's the spring. I'll definitely try stretching the spring on one I know has the problem and seeing if that helps. I appreciate the tip!
I'm new to midcaps, and this video came along at just the right time. I recently purchased 3 A&K 75 rd M4 shortmags. Two are fine, but with the third the BBs just dribble out. Will the cleaning shown in the video help, or do I need to replace the spring?
It could be something as simple as the spring/follower is hitting a rough patch that needs to smooth out. But it could also be the spring itself needs replacing.
Yes, however you'd lose some capacity. You could experiment with cutting the spring to avoid losing capacity but I couldn't guarantee the performance after doing that.
My math could be wrong, but probably half. Might be worth trying to trim these specific ones or finding a different brand. My thinking is: the spring is made for a mag that holds 50% more BBs that yours, so you'd lose 50% of capacity. Again, my math could definitely be wrong.
Dawg no one on the internet is mentioning the pin towards the top you have to pull out, I've been here 20 mins trying to push it out. Thanks for nothing
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
As the video went on I realized how good you are at talking. It was useful information the entire time, excellent how-to video voice. Fast thinker too
Love how you counted off 1 straight to 3 right at the beginning lol. Great video idea man, keep it up
Wow you just saved my Mid caps ! Great vid as usual thank you
Outstanding video. Informative, well structured, not too much flab. Thanks for the demo. Subscribed.
Dang late again lol you always post when I'm in school. I shared this with my friend because he used to just buy new mags but now he can fix it. Plz do a tutorial on how to clean and take apart a pistol mag, I have seen to many times people at a field that take there mag apart and loose a piece or do it wrong and break it. Please and thank you.
Love the vids
Lol same i always am at school too
Once again excellent demo and explanation, I'm one of the older players but still enjoy learning.
Cheers
Great video keep it up im always learning here , actually learned almost everything ik about airsoft here. Love the channel
Same here
Great video. Informative, helpful, clearly explained and examplef. Earned a subscriber 👍
My the spring on the feeding lip that keeps the bbs in is hanging out and i dont know if i can fix it or if i have to biy a new one, do you have any idea or advice on how to fix it?
I just bought a brand new Krytac trident mk2 crb m and I’ve noticed it shoots fine until there are about 5 bbs left then they literally fall out the barrel. Any tips?
What magazine are you using? Sometimes midcap mags with extended follows can push the BBs too far into the chamber due to the spring pressure. Also, if it's a new gun, adjust your hop up and that may solve the issue if it isn't closed up enough.
Are the pts epm followers actually also usable with other mags?
hey my mid cap mag doesnt work, basically i load it up as usual (its a m4 mag and i use it with my g36c with m4 mag adapter) i put it in my replica and all the bbs insatly shoot into the barrel, i can shoot once and then the bbs dont come out and i have to shake the gun so they fall out they're brand new
Can anyone tell me why my bbs are double stacking and causing blockages? By double stacking i mean 2 bbs sit in the feeding tube and look like a figure 8
Thanks a lot mate i was about to throw a mag away but could save it because of you ^^
Hey BB warrior, I'm having trouble feeding heavy BBs in my Krytac 150rd mid caps. Feed great with .25 but .28 seem to skip a lot about half way through. How can I add spring tension without having to worry about aftermarket compatability?
There's several things to test for if you haven't already, including setting your hop up to "zero" and shooting to see if the issue persists. Something that may be helpful if the Krytac mag has clear externals is to remove it from the shell and watch it release the BBs. If there's a place it's snagging then check for anything it could get stuck on and lightly sand it. I've also heard of people physically stretching their springs to help, but YMMV and I'd only test it on one mag first. All this is based off the assumption the different weight BBs are the same brand, because that can be a common issue. If these basic tips don't work, feel free to join my Discord or add me on instagram and I can help troubleshoot further.
@@TheBBWarrior Thanks! And yeah, I've done most of this troubleshooting myself. Nothing seems to be wrong with any of them. I just find it a bit odd that my high caps feed flawlessly, and all my mid caps seem to stop about half way through the mag. (Gun is my Krytac Trident, BBs are Elite Force .28s, and the mags are Krytac mid caps and Lancer Tactical 300 round high caps) and the high caps are perfect, which leads me to believe it's the spring.
I'll definitely try stretching the spring on one I know has the problem and seeing if that helps. I appreciate the tip!
Great video! Thanks!
Someone told me to oil my mags, is this true ?
the spring in your midcap/lowcap mags*
No oil ! Where bbs have contact u have to avoid it because your hopup will not function anymore and the barrel will get dirty
I'm new to midcaps, and this video came along at just the right time. I recently purchased 3 A&K 75 rd M4 shortmags. Two are fine, but with the third the BBs just dribble out. Will the cleaning shown in the video help, or do I need to replace the spring?
It could be something as simple as the spring/follower is hitting a rough patch that needs to smooth out. But it could also be the spring itself needs replacing.
Good video! Side note, you look like Matimi0s brother lol
My mid caps work perfectly above 10 degrees celsius, but they wont feed with full auto when the weather is cold. What is the problem?
The cold.
Nice vid!
Please do a video on Hi-Caps.
6:40 lol it made me laugh
Needed this one
Could I use these springs in a magazine that has a capacity if 100?
Yes, however you'd lose some capacity. You could experiment with cutting the spring to avoid losing capacity but I couldn't guarantee the performance after doing that.
The BB Warrior How much capacity would I lose, what would you estimate?
My math could be wrong, but probably half. Might be worth trying to trim these specific ones or finding a different brand. My thinking is: the spring is made for a mag that holds 50% more BBs that yours, so you'd lose 50% of capacity. Again, my math could definitely be wrong.
I don't have any needed tools for repair... Still watched
Great Video...Thanks..
Cool... Any idea why you are quiet the whole video?
Ah there we go. Needed to skip to the 1 minute mark before you started speaking
Jesus the vfc magazines are among the least repair friendly magazines. and they have a nasty practice of going proprietary for everything but AR15s
Dawg no one on the internet is mentioning the pin towards the top you have to pull out, I've been here 20 mins trying to push it out. Thanks for nothing
The thumbnail says 'Maintance' instead of 'Maintenance'.
Oops. I'll have to correct that when I get home
Airsoft market
Not airsofting market
69 viewzzzzz
Stop tryna be airsoftology lol
He's better than airsoftology