This thing looks incredible! How has it been doing now? I want this to be my starting supply, but I’m so worried ab noise and how it handles high gain. Thank you so much for the review my friend.
Hey N-Money Thanks for your comment! You're welcome, glad you like it 😊 Its been holding up quite well, especially with lots of pedals.. my HX Stomp is pushing it to the limit though ... need to do some more tests if it is general or only with high Dsp profiles .. I hope to make a follow up video soon 🙏 Stay safe 😎
Hi Samra Thanks for your message - unfortunately I don't have this particular power supply anymore but bought another one of the same series.. it's been used heavily and almost at Power Limit since I got it and is working fine. Hope that helps your purchase decision. Wish you all the best! BR MGP
Hi Drinkyoghurt Thanks for your comment ! Yep, thats the original manufacturer, but Harley Benton managed to buy a s**tload of them to brand them and offer them so cheap😎👍 great for us Pedalieros!🤠 Rock on and stay safe!
Hi SzKi thanks for your comment. Mostly Harley Benton buys companies products and slap their brand on it - but this is done with some research in mind to not sell total trash and ruin the brand name. Either way - MORE GEAR for US ! :)
what is the difference beteen the pro and the ACpro versions. i can see one has a wall wart and the other has a IEC AC connector directly into it. but why would you choose oe over the other
Hi Phil Sorry for the long delay on this reply. The AC Version has a three pin power outlet for units or amps that require that amount of power. This spares taking one extra power supply along in some cases. So if you need the extra power, then the AC version makes sense. Otherwise stick to the regular one. Hope this helps. BR MoreGearPlease
@@psychodelikmc thanks for the reply. I ended up ordering the AC version. Im not sure it makes a huge difference for me as I just play at home. But it does the job for a lot less than a ciocks supply
Awesome video! The iso12 looks pretty sturdy for the money! I guess it's a metal housing? Did you notice any electrical distortion in your signal chain while using it?
Hey Paul! Welcome to the Channel and thanks for the sub! It's built like a tank, with two U shapes screwed together.. and yes it is brushed metal- should've mentioned that 😂 So far so good but I will make a follow up video about the signal chain Keep shreddin and meltin faces BR Ahmed from MGP
Hey Georges sorry for the late reply. Unfortunately I don't have the Power supply anymore to check but I think you are correct - I think you can toggle on/off on that led. Wish you all the best !! BR MGP
Hi HPRS, Danke für dein Kommentar und Lob! Es kommt noch ein kurzes Follow up Video mit meinen Erfahrungen damit! Keep Shreddin' loud Grüße Ahmed von MGP
Hi Chris ! Thanks for your comment ! Unfortunately have not come around to it - been a crazy busy time for me since and I have focused on more guitar Demos recently ! But it also gave me a chance to really test the Power plant. I will make sure to not keep you waiting much longer and Release the follow up Video soon. BR and heavy Grooves Ahmed
Hi Hotep Thanks for your comment! You can purchase it on any of the Thomann Websites (depending on your location). Have a nice Sunday and heavy grooves, MoreGearPlease
@@psychodelikmc can the power supply work worldwide without a transformer? Meaning works on 110 US and 240 worldwide? I asked Harley Benton all questions always in 1. 2. 3 or bullet forms so they see it but they always fail to answer everything. Either they don't care or they are just i****s. Their products seem to be very good for the money or else I would never shop there because they just don't care about customers. Thanks
Dear SzKi As I am in Europe, I cant check for sure.. but I think it is not possible due to the power supply for the unit is setup for 220V. I guess to be safe you should use a transformer in the US, but I will double check on that again for you and follow up with another comment. Sure thing, and keep your shreds heavy :) BR
@@psychodelikmc thanks. Wanted to know the voltage compatibility for their power attenuator as well as the power supply iso 12 pro. If they both work worldwidewithout a transformer. Appreciate it
This thing looks incredible! How has it been doing now? I want this to be my starting supply, but I’m so worried ab noise and how it handles high gain. Thank you so much for the review my friend.
Hey N-Money
Thanks for your comment! You're welcome, glad you like it 😊
Its been holding up quite well, especially with lots of pedals.. my HX Stomp is pushing it to the limit though ... need to do some more tests if it is general or only with high Dsp profiles ..
I hope to make a follow up video soon 🙏
Stay safe 😎
This is the only power supply that fits my budget currently!
can you please tell me if this still working or not?
Hi Samra
Thanks for your message - unfortunately I don't have this particular power supply anymore but bought another one of the same series.. it's been used heavily and almost at Power Limit since I got it and is working fine.
Hope that helps your purchase decision.
Wish you all the best!
BR
MGP
Just so you know, these are all rebranded PSUs from a Chinese company called Vitoos. They sell similar models under different names.
Hi Drinkyoghurt
Thanks for your comment !
Yep, thats the original manufacturer, but Harley Benton managed to buy a s**tload of them to brand them and offer them so cheap😎👍 great for us Pedalieros!🤠
Rock on and stay safe!
Good to know. I think they rebrand most of their other products too. Their pedalboard spaceship is very similar to Palmer pedalbay
Hi SzKi
thanks for your comment. Mostly Harley Benton buys companies products and slap their brand on it - but this is done with some research in mind to not sell total trash and ruin the brand name.
Either way - MORE GEAR for US ! :)
what is the difference beteen the pro and the ACpro versions. i can see one has a wall wart and the other has a IEC AC connector directly into it. but why would you choose oe over the other
Hi Phil
Sorry for the long delay on this reply.
The AC Version has a three pin power outlet for units or amps that require that amount of power. This spares taking one extra power supply along in some cases. So if you need the extra power, then the AC version makes sense. Otherwise stick to the regular one.
Hope this helps.
BR
MoreGearPlease
@@psychodelikmc thanks for the reply. I ended up ordering the AC version. Im not sure it makes a huge difference for me as I just play at home. But it does the job for a lot less than a ciocks supply
Awesome video! The iso12 looks pretty sturdy for the money! I guess it's a metal housing? Did you notice any electrical distortion in your signal chain while using it?
Hey Paul! Welcome to the Channel and thanks for the sub!
It's built like a tank, with two U shapes screwed together.. and yes it is brushed metal- should've mentioned that 😂
So far so good but I will make a follow up video about the signal chain
Keep shreddin and meltin faces
BR
Ahmed from MGP
The in led isnt a on/off button as well?
Hey Georges sorry for the late reply.
Unfortunately I don't have the Power supply anymore to check but I think you are correct - I think you can toggle on/off on that led.
Wish you all the best !!
BR
MGP
Sehr cool! Genau den habe ich auch in's Auge gefasst.
Hi HPRS,
Danke für dein Kommentar und Lob! Es kommt noch ein kurzes Follow up Video mit meinen Erfahrungen damit!
Keep Shreddin' loud
Grüße
Ahmed von MGP
Is it a switch mode tecnology?
Hi Roberto
It sure is - just amazing for a large pedalboard with different pedals.
BR and shred on
MGP
I can't find the follow-up video for this :/
Hi Chris !
Thanks for your comment !
Unfortunately have not come around to it - been a crazy busy time for me since and I have focused on more guitar Demos recently !
But it also gave me a chance to really test the Power plant.
I will make sure to not keep you waiting much longer and Release the follow up Video soon.
BR and heavy Grooves
Ahmed
@@psychodelikmc no worries man! I have already bought the same model anyway, arrived today!
@@chrisa1234 sweet !! Thanks for the Motivation anyways😎🤘
Where can I purchase this power supply?
Hi Hotep
Thanks for your comment!
You can purchase it on any of the Thomann Websites (depending on your location).
Have a nice Sunday and heavy grooves,
MoreGearPlease
www.thomann.de/de/harley_benton_powerplant_iso_12_pro.htm?partner_id=23333
Great video, but you didnt mention the mA situation
Hey Dani
Thanks for your comment and open thoughts !
You are absolutely right and I promise to improve 😎👍
Stay safe and heavy grooves!🤘
@@psychodelikmc ;)
🍀👍🍀
Thanks you so much 😎👍
@@psychodelikmc can the power supply work worldwide without a transformer? Meaning works on 110 US and 240 worldwide?
I asked Harley Benton all questions always in 1. 2. 3 or bullet forms so they see it but they always fail to answer everything. Either they don't care or they are just i****s. Their products seem to be very good for the money or else I would never shop there because they just don't care about customers.
Thanks
Dear SzKi
As I am in Europe, I cant check for sure.. but I think it is not possible due to the power supply for the unit is setup for 220V. I guess to be safe you should use a transformer in the US, but I will double check on that again for you and follow up with another comment.
Sure thing, and keep your shreds heavy :)
BR
@@psychodelikmc thanks. Wanted to know the voltage compatibility for their power attenuator as well as the power supply iso 12 pro. If they both work worldwidewithout a transformer. Appreciate it