The light on my handlebar is a fenix tk20 v2 I believe off hand. It's a thrower style light from fenix. I think if you ride at night it's an absolute must have. Any style of light added will help alot.
The top of the right side shock you will see a spin wheel that shows what direction to spin it for more compression. I believe righty tighty for a more compressed spring rate. Same with the back you can adjust the spring and the air pressure in the shock
@TheElectricWoodworker Thank you. I have played with both settings on the front shocks. Didn't seem much different. I know on the bottom is a air valve. Do they need additional air? From factory. New here
I think they didn't give me all the slack possible on my start button because mine would barely even let the connectors touch when installed. Let alone when I turned the bar it had no chance of connecting. I got some extra wiggle room but not much from pulling the cord. Can't imagine if I added the riser bar as well
Must just be the exact fit for the xxx and mx3 maybe I would assume. Would make sense for talaria to make them the same across the board but I have no idea
Dude you can get medication for OCD. JK man. Embrace the inner perfectionist! I thought the xxx was a too small for me but I like the bike very sleek. In 5 years everyone will have at least one of these bikes.
I agree with all of this 😆. Last night me and a buddy were put and he said how is this not super popular already. Soon it will be. Then I got a flat tire in the middle of the woods
Lol I didn't even get the saw moving but to start a line. Then the video cuts as I moved the kid entirely out of the area. Her face was priceless when she heard this start up it was funny.
I had to finally cut the brake cut off cables because I had too many cables. lol I don't need them.........yet.
I just got a throttle extender from warp 9
If those were out back then it would have saved me alot of time lol. Happy how much stuff has come out for these bikes that's for sure
Where did you get the bag from? Looks sick on the handle bars!
I got this little handle bar bag on Amazon. There is only a couple to choose from if you do search it. But in many colors.
what is your light? and do u recommend it? handlebar light
The light on my handlebar is a fenix tk20 v2 I believe off hand. It's a thrower style light from fenix. I think if you ride at night it's an absolute must have. Any style of light added will help alot.
My front brake line rubbed on my tired and finally busted. Tryinf to find where to buy a replacement line
Where did your start rubbing at?
Left side of the front tire. Because my shocks go down fairly far when I sit on it. When I hit bumps I guess it rubbed and broke
Just replaced my front brake line. Can't figure out how to route it so it doesn't flex/fold or rub
I'm sure you have it fixed by now but I'm just seeing this. You must have used the factory zip tie loop to help keep it away right?
Do you know how to make the front shocks stiffer? When i sit on the bike they go down pretty far. I am only 210lbs
The top of the right side shock you will see a spin wheel that shows what direction to spin it for more compression. I believe righty tighty for a more compressed spring rate. Same with the back you can adjust the spring and the air pressure in the shock
@TheElectricWoodworker Thank you. I have played with both settings on the front shocks. Didn't seem much different. I know on the bottom is a air valve. Do they need additional air? From factory. New here
Only 210? Mine go down far and I’m 160 bro…the MAX weight limit is 250 and you’re questioning the forks compressing?
only
the warp 9 bars fit that bike without sawing them I thought? ive seen a lot of people install them and they fit fiine
I think they didn't give me all the slack possible on my start button because mine would barely even let the connectors touch when installed. Let alone when I turned the bar it had no chance of connecting. I got some extra wiggle room but not much from pulling the cord. Can't imagine if I added the riser bar as well
I see that those are warp 9 pegs are they the ones for the talaria sting r
Must just be the exact fit for the xxx and mx3 maybe I would assume. Would make sense for talaria to make them the same across the board but I have no idea
Dude you can get medication for OCD. JK man. Embrace the inner perfectionist! I thought the xxx was a too small for me but I like the bike very sleek. In 5 years everyone will have at least one of these bikes.
I agree with all of this 😆. Last night me and a buddy were put and he said how is this not super popular already. Soon it will be. Then I got a flat tire in the middle of the woods
Oh, my God GO to your garage YOU have a little baby there and you sawing your handlebars🙄😌👉
Lol I didn't even get the saw moving but to start a line. Then the video cuts as I moved the kid entirely out of the area. Her face was priceless when she heard this start up it was funny.
i been trying to talk myself out of giving Luna my 3,550 this video brought me back on onboard 🫵🏽😂🤑