GMC Terrain - FRONT & REAR WINDSHIELD WIPERS FUSE & RELAY LOCATION (2010 - 2017)

Поделиться
HTML-код
  • Опубликовано: 5 сен 2024

Комментарии • 18

  • @jamescastle9606
    @jamescastle9606 7 месяцев назад +1

    I replaced the 25 amperage fuse in #29 twice and it instantly burnt them both out when I hit the wiper lever. I'm at a complete loss.

    • @QuiteAlright
      @QuiteAlright  7 месяцев назад

      Hi, most likely there is a short happening somewhere causing fuse to burn. You will have to start by inspecting all wiring and electrical connections. Short could also be caused by faulty wiper switch or wiper motor

  • @grahamfron6706
    @grahamfron6706 10 месяцев назад +1

    You should also note that while troubleshooting a rear wiper motor not working, the motor will not operate with the tailgate open. You can check all the fuses and relays to be in working order, but unless the tailgate is closed it will not operate

    • @QuiteAlright
      @QuiteAlright  10 месяцев назад

      Thanks for adding to the video

  • @TheVickigarcia09
    @TheVickigarcia09 2 года назад +1

    Well done thanks

  • @corazonbeso
    @corazonbeso 9 месяцев назад

    My left wiper stopped working suddenly but my right one works fine. Will this solve issue?

    • @QuiteAlright
      @QuiteAlright  9 месяцев назад

      Hi, unfortunately it will not. If fuse was the problem both wipers wouldn't work. Also wiper motor should be good if one wiper works. First inspect the faulty wiper arm and make sure the bolt holding it is tight. If that doesn't help it you will have to disassemble everything and inspect all components as something might got detached

  • @alexanderlugomayorga6507
    @alexanderlugomayorga6507 6 месяцев назад

    Hello, where is what controls turn signals rear left?

    • @QuiteAlright
      @QuiteAlright  6 месяцев назад

      Hi, there is no specific fuse or relay responsible for power to turn signal lights. You would need a wiring diagram to see how those are wired and powered. But first make sure to check the light bulb and then inspect / clean socket using electrical contact cleaner. Then test using multimeter if power is coming to the socket if still not good

    • @alexanderlugomayorga6507
      @alexanderlugomayorga6507 6 месяцев назад

      @@QuiteAlright the bulb is working, but just for breaks, it's no blinking.

    • @QuiteAlright
      @QuiteAlright  6 месяцев назад

      @@alexanderlugomayorga6507 Most likely problem is the bulb itself. Try replacing it and that should fix the problem

  • @bigshawn1403
    @bigshawn1403 Год назад

    Why do I hear the motor but the blades don't move, I had alot of ice on top and did not move it when I went to turn it on

    • @QuiteAlright
      @QuiteAlright  Год назад

      Probably the link arm got disconnected. Try removing the arms, inspecting everything and then refit the arms

    • @liltony187harris4
      @liltony187harris4 Год назад

      Did you ever figure it out mind was working fine then all of sudden stopped

    • @deaconfriesen2704
      @deaconfriesen2704 9 месяцев назад +1

      Ok, this just happened to my car, I can hear the motor but the wipers just don’t work. How did you fix it?

    • @Tobzzzz_
      @Tobzzzz_ 4 месяца назад

      @@deaconfriesen2704same thing is happening to my car 🥲 how’d u fix yours?

  • @richardmoore2545
    @richardmoore2545 Год назад

    Ll