WPL 2 speed gearbox and 370 motor tips and tricks.

Поделиться
HTML-код
  • Опубликовано: 20 ноя 2024
  • The WPL 2 speed gearbox is my favorite gearbox so far from WPL. It is exceptionally robust. I do recommend this gearbox especially after you watch this video and learn how to deal with its quirks. Check out my WPL B36, C24 and MN Model D90 in my videos. They are sporting the 2 speed gearbox. The MN Model D90 has a Brushless motor installed on this 2 speed. Hope this helps people. Have a great day and go RunThatRc!
    Wpl original 2 speed with 370 motor:
    www.banggood.c...
    Wpl original 2 speed with tx/rx:
    www.banggood.c...
    Link to RTR C34:
    www.banggood.c...
    Coupon code for 20% off:
    BGC34CAR
    C34 Regular kit version (no discount code):
    www.banggood.c...
    Mn model mn45:
    MN Model mn45 kit:
    www.banggood.c...
    MN Model MN45 rtr:
    www.banggood.c...
    My other WPLs:
    WPL C24 kit:
    www.banggood.c...
    WPL C14 kit:
    www.banggood.c...
    WPL B36 kit:
    www.banggood.c...
    WPL B16 kit:
    www.banggood.c...
    WPL B24zh RTR:
    www.banggood.c...
    WPL B24 kit:
    www.banggood.c...

Комментарии • 217

  • @RunThatRC
    @RunThatRC  4 года назад +3

    Check out the links in the description or go straight to the official WPL RC website by clicking below:
    www.wpl-rc.com/?ref=DAVIDCLARK

  • @mraltoid19
    @mraltoid19 2 года назад +10

    So, an interesting thing happened with my WPL 2-Speed. The 370 motor burned out on it and I replaced the motor with a $10 RedCat 370 motor and WOW it's sooo much faster and more powerful. I've seen people retro-fit the MN86k's 390 motor to the WPL 2-Speed, but just replacing it with a better 370 does the trick from my experience.

  • @kreezexalted
    @kreezexalted 3 года назад +3

    Dude you're the reason I'm in this game. Just started about 4 weeks ago after I bought that Xiaomi Jimny on sale just at the side off the street (basically just for fun). Saw your video running that to the hill, then saw your WPL C24-1 video. After looking at tons of WPL videos, Now I'm waiting for my C24-1 RTR, a C24 Kit + metal upgrades to be delivered! Your videos after very useful. Keep it up bud!

    • @RunThatRC
      @RunThatRC  3 года назад

      nice glad to hear im not the only one enjoying these little beasts!

    • @kreezexalted
      @kreezexalted 3 года назад

      @@RunThatRC yeah. I totally left my Sneaker channel coz I'm too damn busy building my rigs now. Yep gave up my sneaker collection for this. :-D

  • @geneside0
    @geneside0 4 года назад +4

    Im so glad i have you on RUclips, you have cured my frustration with the gearbox, i have a b-16 and i love it but its my first ever 2 speed gearbox and it was slipping, now im back to trailing, thanks heaps buddy 👍🏻😎

  • @AcroFPVpilot
    @AcroFPVpilot 5 лет назад +4

    What a genius solution to such a silly problem. Its a coincidence you posted this video today, because I just put a 2 speed in my C14 and have been experiencing slipping in 1st gear. You can see the issue in my latest video on my channel. I was afraid I would have to tear my truck apart again to break down the gearbox. But I am going to go searching for some foam right now and see if that solves it!
    Thanks for posting this :)

    • @RunThatRC
      @RunThatRC  5 лет назад +1

      Hope it solves it for ya!

  • @creativeexperience6388
    @creativeexperience6388 Год назад +1

    Love your channel. Your channel is one of the channels that inspired me to get my first rc car and that was a rbr/c tube chassis crawler with wpl parts

    • @RunThatRC
      @RunThatRC  Год назад +1

      nice! Always fun to see a build come to life

  • @jahmenrcbuildingasone4254
    @jahmenrcbuildingasone4254 5 лет назад +3

    The more I watch your vids is the more I really want to grab a couple of these WPLs and get to tinkering. Teally glad I found your channel brother✌👍✌👍✌👍👍

  • @robk7196
    @robk7196 4 года назад +3

    Great video man! Your videos have helped me a lot with learning about my WPL trucks

    • @RunThatRC
      @RunThatRC  4 года назад

      Thanks for the support and glad it helped!

  • @Hjerte_Verke
    @Hjerte_Verke 3 года назад +2

    The Green Grease recommended at 8:25 is a good lube for RC since it is plastic and rubber-safe. A lot of lubes aren't and will weaken, soften or otherwise degrade plastic. Grease like that usually comes in big 14 oz tubes like David shows, which is a lot of grease for an RC model...
    I found out Green Grease also comes in 3 oz tubes (usually in 3-packs) for the mini grease guns so buying the 3-pack, keeping one for yourself and sharing the rest with your friends might be a good option. Then again, these WPL gears need a decent amount of grease because if you use a small amount, it will fly off the gears and stick to the walls of the gearbox. You want the gears 'bathed' in a sea of lube and if you have as many RC cars as David has, you might use up a big 14 oz tube in a year or two... especially if you drive outdoors and utilize submarine mode, hahaa

    • @RunThatRC
      @RunThatRC  3 года назад

      good stuff! I also have the small tubes but my buddies just end up with it lol.

  • @brsrc759
    @brsrc759 5 лет назад +7

    I tend to be way more interested in the tech videos than the running videos for some reason

    • @SLEG0
      @SLEG0 2 года назад +2

      I mainly like the videos were they install them

  • @sanatkumarasharma3627
    @sanatkumarasharma3627 4 года назад +1

    Wow David, your ingenuity hits bullseye again on the slipping gear issue. I adopted the same solution using a piece of polystyrene tucked tight against the servo and it works perfectly well. Simple and easy fix. Thanks! ;)
    Cheers

    • @RunThatRC
      @RunThatRC  4 года назад

      Nice! glad it helped with your issue.

  • @rustytoolman4912
    @rustytoolman4912 Год назад

    Hey David, thank you for your insight on the 2 speed trans. Another great video!!

    • @RunThatRC
      @RunThatRC  Год назад

      It's one one my favorites to run on my WPLs and MN models. I like the new gearbox that's in the C54-1 RTR and the new B36-3 RTR. Paired with a 370 motor and 1080 HW esc its a performer on trails.

  • @jasoncaribou9530
    @jasoncaribou9530 3 года назад +2

    I need your expertise 😊, wat is the VCC slot on the receiver for , because when we plug in to this spot with the ecs , my wpl seems to have more power and speed !!? ,Wat does that mean , 🙄 , please help me , thanks David 👍😄

    • @RunThatRC
      @RunThatRC  3 года назад

      I never experienced that. Your running the V3 board with your own esc?

    • @jasoncaribou9530
      @jasoncaribou9530 3 года назад

      @@RunThatRC ya I bought a new ecs on Amazon , with a new receiver , for the 3 chanel dumbo remote , but we pluged into the VCC slot the truck has way to much power , mega , so we pluged into the Chanel 3 and it seems to run normal speed , and power , (model T G 3 ) receiver , trying to figure out what the VCC is for , !? . On the receiver , I'm unsure and don't want to do something Rong , I'm hoping that you will know more about this , VCC slot on the receiver , our battery is a 1200 battery that came with my , w p l ,
      Thanks again David , 👍 , you know your stuff ,Jay 😊.

  • @roberthenry1102
    @roberthenry1102 5 лет назад +1

    Thanks for his vid... I am waiting on mine to come in.. should b here this coming weekend for my Mack truck.. can’t wait..

    • @RunThatRC
      @RunThatRC  5 лет назад +1

      It's a good one in my experience. I have this 4th 2 speed going into something but can't decide and 3 are in service and running strong as of now.

  • @ehmmwl7600
    @ehmmwl7600 2 года назад +1

    to anyone wondering what motor and gearbox to apply to their MN D90.. it’s this one. not the one speed. this motor/gearbox is much faster and has ability to go low speed high torque in first gear. also u will need a “gearbox riser” to apply to D90 without hitting chassis links… i kno this through much trial n error. this product is what you want

  • @rc4life315
    @rc4life315 5 лет назад +2

    I never knew these truck was so upgradable so i bought a b_ 36

  • @747fa
    @747fa 5 лет назад +1

    Yep, another interesting and informative video. And, if you can afford it and like it, buy it. Parts always come in handy too.

    • @RunThatRC
      @RunThatRC  5 лет назад +1

      And when you upgrade you have stock parts to fabricate something with! Win win

  • @stnickcarver
    @stnickcarver 2 года назад +1

    New to these little RC trucks and liking them alot! As for mods, this is my first one. Do you actually show installation? I'm nervous about taking my stock truck apart and not knowing how to properly install the two speed AND get it to work. There are so many videos out there, but you make it seem easy. I bought the two speed with servo. Then metal axles. Now to tear apart the truck and install it! Also, I bought the WPL transmitter with 3rd channel, so the receiver needs to be installed. I know this is so simple to you, but scary to me! Thanks for your time and videos.

    • @RunThatRC
      @RunThatRC  2 года назад

      I dont think I talk about it in detail but I do have close ups that show how the 2 speed is installed. I may make new videos on them.

  • @pedrowoolson4273
    @pedrowoolson4273 5 лет назад +2

    Nice vid. These transmissions are pretty sweet. I actually blew apart a stock driveshaft (doing something stupid), so the trans is not the weakest link. The arm flex does seem to get worse over time but mine hasn't popped out of gear at all despite the flex being pretty significant right now (my reason for checking out this video). The C24 trucks are pretty awesome if you want to build a cheap crawler that can really climb

  • @bugsy742
    @bugsy742 4 года назад +2

    Thanks for sharing mate it’s really appreciated 👍😎🤜🏻🤛

    • @RunThatRC
      @RunThatRC  4 года назад +1

      thanks for stopping by!

  • @megafaunic1
    @megafaunic1 3 года назад +1

    Man love your vids, you've helped me a ton with MN and now WPL! I have C34 (I know should've gotten the kit!) And I'm wondering if you have advice for making shocks less bouncy? Or a link to good replacements! Thanks so much!

    • @RunThatRC
      @RunThatRC  3 года назад +1

      you can try cutting the top tightly wound spring section and that should help but will lower the truck slightly. I run stock springs just spary oil in the shock every now and then and they perform better once you put some running time on them.

  • @yunusdesai2429
    @yunusdesai2429 2 года назад +1

    Hello, great video, but is a new transmitter needed for the 2 speed gear box install? I just got the RTR version.

    • @RunThatRC
      @RunThatRC  2 года назад +1

      unfortunately yes. the WPL res v3 is a good all in one choice or a stand-alone esc and receiver setup with a different 3 channel tx.

  • @mallexplorer
    @mallexplorer 4 года назад

    For some reason mine came a little short and didn't shift gears well, so I had to use another servo arm for it to work properly, but now it can shift great!

    • @RunThatRC
      @RunThatRC  4 года назад

      nice way to solve an issue.

  • @modelnutty6503
    @modelnutty6503 5 лет назад +2

    STILL can't find a source for buying the newer tan colored stock gearbox, the older black ones all day long for about 4 bucks of course, and "Siamese 69" two of them is really good in a 2 axle with a pair of 130 motors. gives good grunt and a decent fast walking pace for a simpler 2ch Tx setup. tan gearbox about 1/2 that speed, better for climbing etc.

    • @RunThatRC
      @RunThatRC  5 лет назад +1

      I have two c14s and two c24s purchased at the same time and all came with tan gearbox but one of the c14s had a 3 gear arrangement with a 10 tooth pinion and the rest so far are 12 tooth and 5 gears. Maybe old stock gears left over when they went to tan gearbox?

    • @modelnutty6503
      @modelnutty6503 5 лет назад

      idk, looks like the 5 gear setup needs a little bit more room inside, the way they put the stops and position of the output shaft.

  • @seanmanness1351
    @seanmanness1351 2 года назад +1

    Awesome video. Plain talk about an important mod. Backed by real experience. Unbiased. Thanks! Transmission will be ordered as soon asy stupid ass quits typing!

  • @earlfuller6474
    @earlfuller6474 3 года назад +1

    I've had no issues with mine and alot of the time when I'm running a trail I won't even stop or slow down to switch gears

    • @RunThatRC
      @RunThatRC  3 года назад

      sometimes you get one that was built just right.

  • @KTMBiker640
    @KTMBiker640 3 года назад +1

    Thanks for the tip for the bending servo!
    i have the same issue and maybe it will help :)
    but i have another problem running the combo. my motor lagging when i drive - do you have any suggestion?
    i'm running one of those cheap 30a escs but my friend got exactly the same problem running a way better hobbywing esc :(
    Thanks!

    • @RunThatRC
      @RunThatRC  3 года назад

      I am not sure about what you are trying to describe.

  • @Zerker666
    @Zerker666 3 года назад +1

    I know much time has passed since posting this video, but would you mind telling how you have connected the gear box servo to the receiver? I have a Dumbo x6 Transmitter and the servo in channel 3 in my C44 only makes a about 60 degrees turn instead of 90.
    Also thank you for posting all of the wpl videos, sometimes one can be lost without a good guide, since wpl (ans rbr/c ...) do not really care about that thing do much.

    • @RunThatRC
      @RunThatRC  3 года назад +1

      I haven't used a dumbo Rc setup on my wpls so not sure if your endpoint is adjustable on channel 3. You can try another channel

    • @edwardlove4300
      @edwardlove4300 Год назад

      I just wanted to thank you for your advice.on the windows. I’ve ordered the two speed gear box with the 370 motor for an old wpl B14 I’m redoing.

  • @RCModSquad
    @RCModSquad 5 лет назад +2

    Ya done good!! 👍🏻👍🏻😎

  • @twain772
    @twain772 5 лет назад +1

    That is the same stuff I use for all my vehicles

  • @abhijith7558
    @abhijith7558 5 лет назад +1

    Please make a video of fixing moter

    • @RunThatRC
      @RunThatRC  5 лет назад +1

      Are you talking about fixing the 370 motor? Not sure what your asking. Maybe you want a install video of the 2 speed? Let me know which one? I'll try and help you out

  • @Manly
    @Manly 3 года назад +1

    After playing my rig for about half a year. I started experiencing the shift fork issue.
    At first I thought it was the plastic gears. Look at it, and it’s not.
    Then I noticed that my shift fork is loose. It can slide to the left a bit that makes it a bit far from the servo horn and cause the gears skipping.
    Can I permanently bond it with CA glue?

    • @RunThatRC
      @RunThatRC  3 года назад +1

      that's one way to try and solve it. I haven't experienced that issue yet with any of my 2 speed gearboxes (my luck maybe) my slipping is usually just a servo horn not engaging fully or slipping under load due to flexibility of servo mount.

  • @nopalsporttv352
    @nopalsporttv352 3 года назад +1

    Nice, 👍👍😎

  • @АндрейЗаболотников-и7ц

    gooooood video

  • @metalwaves4154
    @metalwaves4154 5 лет назад +1

    What's your opinion on the TITANIUM color all metal upgrade axels

    • @RunThatRC
      @RunThatRC  5 лет назад +1

      I'm not sure about the titanium color one. I have the brass looking ones and the black steel ones and they are pretty good mesh wise. Just a fyi most of the upgrade parts are not even made by WPL even if they say it on the listing. But they usually still work ok. Just mentioning it so people hopefully wont blame wpl for the quality of the upgrade parts like some people like to do lol.

  • @jonathanbarnette8713
    @jonathanbarnette8713 3 года назад +1

    On my c24 what's the best battery pack for my money something that last and will pick up speed?

    • @RunThatRC
      @RunThatRC  3 года назад +1

      I go for 1500mah lipo or lion packs. 2s 7.4v is what I mainly run.

  • @jesseharless24
    @jesseharless24 4 месяца назад +1

    Also you can do 2 2 speeds there's a video on RUclips of it

    • @RunThatRC
      @RunThatRC  4 месяца назад

      sounds interesting to have dual gearboxes.

  • @Just4FunRC
    @Just4FunRC 5 лет назад +1

    I just got 2 of them i ordered the new set. but i still got the old version. banggood needs some improving on inventory system ID.
    But what you think is the best version? havent tested mine but old version with spring sounds little better dunno.

    • @RunThatRC
      @RunThatRC  5 лет назад +1

      I am on the same boat. I ordered it also and it showed the new ones in the picture but they sent me the ones with springs. So unfortunately I have no experience with the none spring version. Hopefully I will receive one when I order more. Cross fingers. On the other hand i haven't had much issue with the spring version other than the flexible shift servo mount. There are several ways to solve that minor issue. And no stripped gears to report yet.

  • @tomcook5813
    @tomcook5813 4 месяца назад

    Interference was mostly an AM issue for AM radio systems..

  • @mistermasada1829
    @mistermasada1829 5 лет назад +1

    Which metal driveshafts will work when installing this into an MN 90/99?

  • @christiannarrainen7204
    @christiannarrainen7204 5 лет назад

    Can you make a video of installing the 2 speed gear box on a c24 please?

  • @nolanbollenbacher609
    @nolanbollenbacher609 2 года назад +1

    I have premium heavy duty grease would that work as green grease or would it be to thick ?

    • @RunThatRC
      @RunThatRC  2 года назад

      if you use that make sure its waterproof grease if you plan to run in water and just don't use as much of it if it is thick.

    • @nolanbollenbacher609
      @nolanbollenbacher609 2 года назад

      @@RunThatRC ok thank you

  • @band_siberianhusky
    @band_siberianhusky 6 месяцев назад

    Was the gearbox installed without drilling additional holes in the frame? I'm currently replacing a gearbox, and when I install the gearbox into the existing frame hole, it doesn't work well because it's not centered.

    • @RunThatRC
      @RunThatRC  6 месяцев назад

      I haven't had an issue fitting the gearbox in the stock location but I usually raise it up higher to get more breakover clearance.

  • @dashSlap
    @dashSlap 4 года назад +1

    The spring on mine isn't strong enough to hold it in gear.. gonna have to stretch it out I guess.. Ever have that issue?

    • @RunThatRC
      @RunThatRC  4 года назад +1

      had to do that to only one of my 2 speeds.

    • @dashSlap
      @dashSlap 4 года назад

      @@RunThatRC When reinstalling the servo the plastic on the shifting part happened to slide closer to the spring, which effectively shortened the spring lol... thing is working good now. Lucky accident.

    • @Cassienope
      @Cassienope 4 года назад +1

      @@dashSlap Good to know. That's what I am running into now. It feels like it will require a lot of force to keep it in gear. Time to get to stretching or see if I can make the plastic part slip.

    • @dashSlap
      @dashSlap 4 года назад

      @@Cassienope Yeah when i got it into the perfect spot I threw some glue on it, hoping it'll stay put. So far it has.

  • @garydemulder6727
    @garydemulder6727 3 года назад +1

    Hi, I have the wpl 2 speed in my mn99. I also use the wpl metal drive shafts, however on the rear the drive shafts is too short and comes apart (Shaft does not stay in the holder). Which metal drive shafts do you use in your mn's with the wpl 2 speed? Thanks

    • @RunThatRC
      @RunThatRC  3 года назад

      I'm using the wpl ones and am not having and issue with them coming apart. I'm not sure whats going on there. Are the driveshafts the same length?

    • @garydemulder6727
      @garydemulder6727 3 года назад

      Thanks for your fast response! They are the same length. I think the issue is because I mounted the 2 speed gearbox at least 1 cm higher on the chassis, I maxed out on the length of the driveshafts. Grtz Gary

  • @danielsimental2803
    @danielsimental2803 4 года назад +1

    Broooooo! Have you see the low profile metal two speed by rbr/c?

    • @RunThatRC
      @RunThatRC  4 года назад +1

      just seen a pic of it yesterday. Wonder if banggood sells them.

    • @danielsimental2803
      @danielsimental2803 4 года назад

      Run That RC I hope to see a video about it soon!!!!!

  • @Westen_72
    @Westen_72 3 года назад +1

    I know this video is old but I have a dumbo rc x6 with a ( double sided 20a esc ) and where do I plug the services into

    • @RunThatRC
      @RunThatRC  3 года назад

      usually esc is channel 2 and servo is channel 1

    • @Westen_72
      @Westen_72 3 года назад

      Ok thank you , but where do I plug the gear shifting servo into on the reciver or what channel

  • @leoniade
    @leoniade 5 лет назад +2

    nice video, i have one too for my MN 90... I upgraded all the electronics and now I'd like to upgrade links, gears and shaft but I find ridiculous the prices of these items. 50-60$ for a full metal kit... they'll pay 5$ to produce them :(

    • @RunThatRC
      @RunThatRC  5 лет назад +1

      I agree with you. The metal parts are too expensive. As far as metal goes I would just get the metal ring and pinion gear that are around 10 bucks for the set and forget about all the other fancy things because it's all It really needs to be reliable. And maybe metal driveshafts for a little more worry free running. My B24zh runs great and it's only upgrade is 30a esc and 180 motor.

  • @zacmlinaric
    @zacmlinaric 3 года назад +1

    Just got my mn99 today, will this gearbox fit it?

    • @RunThatRC
      @RunThatRC  3 года назад

      it does fit it but since it's a 2 speed with another servo you would need a 3 channel transmitter and receiver to be able to switch gears.

    • @zacmlinaric
      @zacmlinaric 3 года назад

      @@RunThatRC thanks for the info

  • @dontdogarage
    @dontdogarage 3 года назад

    Me again🤣 so its dawned on me that my FS remote may have been lost in a move and I've just ordered the 2 speed... I only plan on useing it for low speed crawling so could I essentially tape the arm back to lock it in first gear?? Also what's a good tire for like 15$? Looking for somthing soft

    • @RunThatRC
      @RunThatRC  3 года назад +1

      The new WPL wheels and tires are nice. For the 2 speed you can just install the shift servo and just have it in first.

    • @dontdogarage
      @dontdogarage 3 года назад

      @@RunThatRC cool thanks for the reply

  • @TransAmDrifter
    @TransAmDrifter 2 года назад

    Is there any difference in WPL 2 speed gearboxes for different cars that fit the 370 motor? I look for a slower gearbox for JJRC Q60 but there's no info about rpm on output shafts.
    ...or a motor that has less rpm but more torque =)

    • @RunThatRC
      @RunThatRC  2 года назад +1

      I know some companies make 2 speeds for these but the wpl official 2 speed are all the same. RBRC makes a metal 2 speed I believe and it has a lower low gear and a faster high gear. Very slightly but noticeable. Unfortunately I don't know the actual output rpm.

    • @TransAmDrifter
      @TransAmDrifter 2 года назад

      @@RunThatRC thanks for info.

  • @softyan
    @softyan 3 года назад +1

    My original 2 Speed Gear broken , i change one Speed motor 380 more Power.

  • @keyrclife
    @keyrclife 5 лет назад

    Which one is better 2 speedgearbox?the version in this video or that comes without spring?

    • @RunThatRC
      @RunThatRC  5 лет назад

      Not sure if your referring to the all metal vs this or are you reffing to the other plastic gearbox with no spring? This one in the vid with the spring has been pretty good and reliable for me. Haven't run all metal long enough to say and the plastic without spring I tried to get but was never able to get that style gearbox so no experience with that one unfortunately.

    • @keyrclife
      @keyrclife 5 лет назад

      RunThatRC Well Thanks for your answer! Oh yes i forgot, how about the quality of a standard servo that comes from the package? Does it die easily?

  • @petersmith6423
    @petersmith6423 5 лет назад +1

    Good vid, new sub, Cheers......

    • @RunThatRC
      @RunThatRC  5 лет назад

      Thanks I appreciate it bro!

    • @petersmith6423
      @petersmith6423 5 лет назад +1

      Hey mate, I have the HSP RGT Rock Cruiser, it's a cool truck but too fast for a crawler, can I put a WPL 2 speed box in do you think?

    • @RunThatRC
      @RunThatRC  5 лет назад

      @@petersmith6423 not sure if there would be enough space. I don't own a rgt sorry.

  • @ChadPeterson-zh1lz
    @ChadPeterson-zh1lz Год назад

    Just got the 370 motor with 2spd gearbox but the wire connectors dont match the connectors onthe truck,

    • @RunThatRC
      @RunThatRC  Год назад

      what esc are you using?

    • @ChadPeterson-zh1lz
      @ChadPeterson-zh1lz Год назад

      @@RunThatRC I was sold a c 24 that had t be 15years old so has original esc . the steering servo is absoliute junk too has two little arms on top held together by a spring

  • @kennygo5053
    @kennygo5053 3 года назад +1

    Can i change the normal speed 370 motor to High speed 370 motor with 52000rpm on this 2 speed gear?

    • @RunThatRC
      @RunThatRC  3 года назад +1

      you can sure try it out. I have a 4500kv brushless bolted to this 2 speed and its been good so far on my mn d90 with WPL parts for upgrades.

    • @kennygo5053
      @kennygo5053 3 года назад +1

      @@RunThatRC but how you found out the pinion fit to your brushless motor? The brushless motor shaft and pinion size must have been different from the original. It would be a hard work to procure and change the pinion gear on the brushless motor.

    • @RunThatRC
      @RunThatRC  3 года назад

      @@kennygo5053 I'm not using the stock pinion. I was lucky that the 10t pinion I had laying around worked for the job.

  • @raffyturc
    @raffyturc 3 года назад

    been wanting to ask this.. w/c of the two has higher torque/climbing power? the 2 speed one on low gear setting? or the one with single speed geared motor&gearbox?

    • @RunThatRC
      @RunThatRC  3 года назад

      not sure which single speed gearbox your referring to. I do like the 2 speed personally. They work for my needs.

  • @sukarnoahmad6048
    @sukarnoahmad6048 3 года назад

    I have this 2speed and it makes some unstable noises. When the truck moves at slow speed it sort of jerks. As if the gears are not of proper size or off alignment. At slow speeds its noticeable where the truck moves fast slow fast slow motion. Am i having trouble with the gears binding?

    • @RunThatRC
      @RunThatRC  3 года назад +1

      usually when that happens to me there is something binding in the driveline somewhere. make sure everything is running free and smooth before you install the 2 speed.

  • @akchannel5937
    @akchannel5937 3 года назад

    can i combine this 2speed gear box with stock wpl c24 board..

    • @RunThatRC
      @RunThatRC  3 года назад

      I don't believe the esc can handle it and you will not have a way to switch gears remotely.

  • @christopherdonnelly6255
    @christopherdonnelly6255 5 лет назад +1

    Thanks for the vid. I'm trying to figure out what I'll need to do to add this to my RTR 24C I just picked up. The controller has no function to work the servo... and no where on the ece to plug in an additional servo.
    Do I need to get a dif ece and controller to have this?
    Thank you!

    • @RunThatRC
      @RunThatRC  5 лет назад +1

      Yes unfortunately you are correct. You will need a 3 channel tx/rx to use the 2 speed on the fly. You can however shift it manually with a small screwdriver by moving the servo horn. I do recommend getting better electronics on it as it will increase the performance and make it more controllable and enjoyable.

    • @christopherdonnelly6255
      @christopherdonnelly6255 5 лет назад +1

      @@RunThatRC Thank you. It's been a few days with this truck and it's a lot of fun. I've ordered a 3ch controller, and a new reciever.
      I have the C24, will I need different drive shafts with the 2 speed? It's been tough to tell from vids.
      What would you recommend, the 2 speed trans, or the upgraded motor and metal gear box?
      Thanks again!

    • @RunThatRC
      @RunThatRC  5 лет назад +1

      @@christopherdonnelly6255 2 speed wins for me.
      These are the driveshafts I recommend
      [US$10.80]1/16 Front And Rear Drive Shaft WPL JJRC 4WD RC Military Truck Car RC Parts from Toys Hobbies and Robot on banggood.com
      banggood.app.link/GvfYBXvgHX

    • @christopherdonnelly6255
      @christopherdonnelly6255 5 лет назад +1

      @@RunThatRC Thanks for all the info... If you don't mind, one more question, please. Regarding the two speed trans. Is the lower speed all torque, and the higher one for top speed? I'm not too concerned with speed, torque is what I'm after with this. That said, it'll be nice to blast it around quickly between fields though with the high speed.
      Regardless, this two speed trans will make a huge improvement to performance, right?
      Thanks!

    • @RunThatRC
      @RunThatRC  5 лет назад

      @@christopherdonnelly6255 yes the 2 speed has a lower gearing so the 370 motor has tons of torque. Enough to break plastic parts if you get binded up. The second gear isn't much faster than the stock 180 motor gearbox combo. Enough for walking it around to the next crawl spot.

  • @jasonmonroe3869
    @jasonmonroe3869 5 лет назад +1

    When I hit the 3rd channel transmitter button, the servo moves 90 degrees and returns back to 0 degrees. How do I change that to where it stays in the 90 degree position?

    • @RunThatRC
      @RunThatRC  5 лет назад

      What transmitter are you using?

    • @jasonmonroe3869
      @jasonmonroe3869 5 лет назад +1

      @@RunThatRC I'm using a cheapo Turbo Racing 91803g-vt 3CH transmitter and receiver. I'm new to the hobby and I'm learning as much as I can.

    • @RunThatRC
      @RunThatRC  5 лет назад

      Is there a way to program the 3rd channel to not act like a momentary switch? Is the controller a programmable one?

    • @jasonmonroe3869
      @jasonmonroe3869 5 лет назад +1

      @@RunThatRC the controller has digital trim and dual rate adjustments. The instructions leave alot to be desired! I appreciate you taking the time to help Me out. Love your videos and enthusiasm.

  • @kristinetarantino3458
    @kristinetarantino3458 4 года назад

    When you do put more grease in the gearbox do you have to clean the gearbox first or do you just stuff the grease in with the wpl grease??

    • @RunThatRC
      @RunThatRC  4 года назад

      I just stuff marine grease in there with the grease that's already in there. Haven't had an issue yet.

  • @andrewgumbs562
    @andrewgumbs562 4 года назад

    I just bought a wpl b-16r and I wanna make it faster. How do I do that and what do I need to get? Do I need a different remote controller?

    • @RunThatRC
      @RunThatRC  4 года назад +2

      you would need the metal upgrades and hopefully they can handle more speed. These trucks where never meant to go fast. You can see how it goes but not my recommendation if you want speed. You would need so many upgrades and custom parts.

    • @andrewgumbs562
      @andrewgumbs562 4 года назад

      @RunThatRC is their anyway I can send you my RC and I would be willing to pay for anything you do to it ?

  • @joshherrman3201
    @joshherrman3201 5 лет назад +1

    So did you just use a jst plug on the motor? I just got my 2 speed and noticed that it does come with wires and the esc I got has a jst plug. Kinda a dumb question just wondering.

    • @RunThatRC
      @RunThatRC  5 лет назад

      Yes I used the included jst because the 30a Esc's I used have the jst installed already.

  • @ninos68bug
    @ninos68bug 5 лет назад

    Hey bud! Looking to get the 2-speed for my c24 also. How did you remove the plastic shaft from the part where it connects to the axles without breaking anything?

    • @RunThatRC
      @RunThatRC  5 лет назад

      I just carefully pry it with a small flat head screwdriver.

  • @madacrist4023
    @madacrist4023 3 года назад

    Hi, can you please advise me on something, i seen that you work with a lot of wpl trucks, mine is still broking the diffs fromt or rear, once I’m forcing it a bit gone, i run 3 types of axels and they don’t survive more then 10 min....thanks

    • @RunThatRC
      @RunThatRC  3 года назад

      you might need to check your ring and pinion mesh while building it. It might be too loose and stripping gears.

    • @madacrist4023
      @madacrist4023 3 года назад

      @@RunThatRC hi, thanks for your reply, that it was what I think too but the last one, titanium one I bought it all ready build and same thing....I don’t know....thanks anyway.

  • @jasonsmithsrrcfun9259
    @jasonsmithsrrcfun9259 5 лет назад +2

    What size esc do you recamend if I am putting a 370 in my b24

    • @RunThatRC
      @RunThatRC  5 лет назад

      The cheap little 30a esc I use in mine are good enough for it. The ones you find everywhere for about 10 bucks.

    • @jasonsmithsrrcfun9259
      @jasonsmithsrrcfun9259 5 лет назад +1

      @@RunThatRC what type of radio and reciver do you use if you dont mind me asking

    • @RunThatRC
      @RunThatRC  5 лет назад +1

      @@jasonsmithsrrcfun9259 I use a flysky gt3c and b. They have hacked firmware. Good radios for the price.

  • @benitisoy
    @benitisoy 4 года назад +1

    i have this sadly SG micro servo wont last do i need to trim the servo endpoint?

    • @RunThatRC
      @RunThatRC  4 года назад

      im still running stock servo. All you have to do is mak sure its straight 90 when in low gear and no engagement when in high and mine have been pretty reliable.

  • @charlesgoehring3445
    @charlesgoehring3445 4 года назад +1

    Anybody know what the numbers 370 etc means? Is it wattage or just a model number?

    • @RunThatRC
      @RunThatRC  4 года назад +1

      130, 180, 370 are motor can sizes.

  • @rafaelyap1368
    @rafaelyap1368 4 года назад +1

    Metal gears? Or plastic inside

    • @RunThatRC
      @RunThatRC  4 года назад

      plastic but very durable. I run brushless in one and its over a year now without issues.

  • @jaykerswell1248
    @jaykerswell1248 4 года назад

    Hey I have an MN90 and I'm putting a 2 speed in with a brushless motor and I want more flex what do I do

    • @RunThatRC
      @RunThatRC  4 года назад

      I have not upgraded any of my shocks on these. I use them as trail trucks and the flex works ok as is. Other people change the shocks to achieve more flex I believe. Sorry I'm no help with that mod.

  • @706bassin8
    @706bassin8 5 лет назад +1

    RunThatRC can you give me the link to this product.

    • @RunThatRC
      @RunThatRC  5 лет назад

      I purchased mine on aliexpress and Ebay. Type wpl 2 speed and try to find a deal. The sellers I got it from dont have it for sale anymore unfortunately.

  • @BoyJorgey
    @BoyJorgey 4 года назад

    Good day, will a bigger 540 motor fit on it?

    • @RunThatRC
      @RunThatRC  4 года назад

      370 I think would be the only direct fit. I have seen people tinker and mod these with 540 motors and brushless motors but it's a massive mod and not simply done.

  • @rcericon710
    @rcericon710 4 года назад

    What’s up bro,
    I just want to let you know that I Gia a two speed gearbox , but after driving my car three times, the servo on the gearbox started shifting from slow to fast speed on its own continuously. I don’t know why that happened. what are you thoughts?
    Also I notices that this two gearbox comes in two presentations. One with the little spring and one with out it. How can you get the one with out the spring?
    I don’t trust that one.

    • @RunThatRC
      @RunThatRC  4 года назад

      Maybe check to make sure you are not over working the servo by setting you endpoints or servo horn properly. Never had experience with the none spring gearbox so I dont know if they are worst or better.

  • @M.TTT.
    @M.TTT. 4 года назад

    Did you ever put metal links on a truck with the 2 speed? Annoying that the servo gets in the way, any solution? Seems like if I bend it it wont be long enough anymore

    • @RunThatRC
      @RunThatRC  4 года назад +1

      My solution would be to mount the gearbox higher up in the frame. It will require some cutting of the interior but not much. I had to do it to my c24 and mn model D90 (did not need interior trimming ) with wpl 2 speed.

    • @M.TTT.
      @M.TTT. 4 года назад

      @@RunThatRC ooo that's a great idea, I'll have to see if ya had a video on that or try to see how I'd do it

    • @RunThatRC
      @RunThatRC  4 года назад

      Here's a vid I did on the C24 with lifted gearbox and body trimned.
      ruclips.net/video/1kdoxFBnsUo/видео.html

  • @maxpane657
    @maxpane657 4 года назад

    I dont know of im stupid but i had a servo issue and have changed servos. (Fir the 2 speed) for some reason i cant seem to get the horn to line up and have the low gear with drag brake and high gear with high gear. Its reveresed. Am i dumb lol?

    • @RunThatRC
      @RunThatRC  4 года назад

      not sure what you mean about the horn lining up? you cant get it 90 or its won't ride in the same slot with the new servo? I only have been using original servos so i have no aftermarket servo recommendation. And for the 2 speed you want drag brake in low gear and freewheel on high gear if your referring to the v3 WPL esc receiver.

    • @maxpane657
      @maxpane657 4 года назад

      @@RunThatRC referring to the v3 electronics. When in high gear drag brale is on, when in low gear it is off. I cant seem to get the servo to engage into low gear without the horn being the wrong way. Ive ordered the newer version of the 2 speed either way. Thanks i know its a bad explaination lol

  • @donaldhenke2750
    @donaldhenke2750 3 года назад

    is there a metal housing for the 2speed trans?

    • @RunThatRC
      @RunThatRC  3 года назад

      I think there is a rbrc transmission that is higher clearance and metal housing. Not one from WPL themselves.

  • @softrc6749
    @softrc6749 3 года назад

    We can upgrade that motor?

    • @RunThatRC
      @RunThatRC  3 года назад

      if you please you can swap with similar sized motors. I put a 370 size brushless motor on one.

  • @makewithmegma
    @makewithmegma 3 года назад +1

    🔥💕👍

  • @benitisoy
    @benitisoy 5 лет назад

    is it ok to put GS Hobbywing Quicrun 40a ESC to 370 2speed transmission im running it to 2s 18650.
    it will burn the ESC?

    • @RunThatRC
      @RunThatRC  4 года назад

      The brushed hobbywing 40a esc should be fine on 2s with the 370 2 speed transmission

    • @benitisoy
      @benitisoy 4 года назад

      RunThatRC how about 60A? is that ok?

    • @RunThatRC
      @RunThatRC  4 года назад

      @@benitisoy should be. I'm running a 60a xl5 esc on one of my b36 trucks

  • @clydehampas1755
    @clydehampas1755 5 лет назад

    RTR how do we solve twitching servos? Thank u

    • @RunThatRC
      @RunThatRC  5 лет назад

      It all depends might be the esc, battery or tx you use. Some Esc's you may need a bec for your servo. I have yet to have a twitchy servo. My buddy did but it was a dead battery. One cell went bad and his servo started twitching. Or it could also be a bad or defective servo?

    • @clydehampas1755
      @clydehampas1755 5 лет назад

      But i got 2 twitching servos. One is the steering and the other is the one that controls the 2 speed transmission

    • @RunThatRC
      @RunThatRC  5 лет назад

      @@clydehampas1755 what esc are you using and radio gear?

    • @clydehampas1755
      @clydehampas1755 5 лет назад

      The one that comes with au star transmitter. It comes with a receiver and a 20 or 30A something kinda esc. But it works fine except for the twitching 2 servos

  • @raffymagaling2516
    @raffymagaling2516 4 года назад

    i saw another wpl like this but its metal gears

    • @RunThatRC
      @RunThatRC  4 года назад

      yup metal kits are available for these.

  • @benitisoy
    @benitisoy 5 лет назад

    is ok if i use a Hobbywing Quicrun 1040 40a esc to 370 2 speed 2s NiMH?

    • @RunThatRC
      @RunThatRC  5 лет назад

      Yes that should work. I have a traxxas slash xl5 60a esc in one of my b36. It just takes patience to figure out where to mount it.

    • @benitisoy
      @benitisoy 5 лет назад +1

      RunThatRC salamat dude asteeg ka sa RC

    • @benitisoy
      @benitisoy 5 лет назад

      hope it will not burn the ESC 😊

    • @RunThatRC
      @RunThatRC  5 лет назад

      @@benitisoy Haha I wish! I just been messing with rc since I was 14 so i picked up some skills lol.

    • @RunThatRC
      @RunThatRC  5 лет назад +1

      @@benitisoy I think you will be fine. These 2 speed 370 motor gearbox can run with a 10a esc but not as smooth as higher amp rated esc.

  • @kholidha1045
    @kholidha1045 3 года назад

    how many rpm, after gearbox...?

    • @RunThatRC
      @RunThatRC  3 года назад

      Sorry I never calculate those numbers. I think it goes 1mph in first or low gear if my memory serves me right.

  • @ijt5131
    @ijt5131 5 лет назад

    Good yoob can it put in b24zh ???

    • @ijt5131
      @ijt5131 5 лет назад

      This video is realy intresting love u!!!

  • @raffymagaling2516
    @raffymagaling2516 4 года назад

    can you put a 550 motor in it

    • @RunThatRC
      @RunThatRC  4 года назад

      I'm sure there are people that can figure that out with some crazy mods but to use the stock housing without mods 370 is max on the 2 speed gearbox.

  • @jesseharless24
    @jesseharless24 4 месяца назад +1

    1st tip is get rid of that junk motor and put a outrunner brushless in there

    • @RunThatRC
      @RunThatRC  4 месяца назад +1

      I have one with an inrunner but most mine are running stock motor on the 2 speed. An outrunner would make it a better slow crawler thats for sure.

    • @jesseharless24
      @jesseharless24 4 месяца назад +1

      @RunThatRC huge difference with the outrunner I have a super modded c14 that has the gear reduction transmission with portals and its so smooth but speed is non existent with a 1100kv but I had overheating issues with brushed motor in the setup and batteries lasting like 5 mins now I can run it for 30+ mins without any issues with heat or battery drain

  • @luna-md1vc
    @luna-md1vc 5 лет назад +1

    What esc do u use

    • @RunThatRC
      @RunThatRC  5 лет назад

      Just using a cheap 30a esc.

  • @abhijith7558
    @abhijith7558 5 лет назад

    How to fix the moter

    • @RunThatRC
      @RunThatRC  5 лет назад

      Not sure what your asking? You need help with the install of the gearbox or actually how to fix the motor if it breaks? Let me know and I'll try and help!

  • @SuperAlexjennings
    @SuperAlexjennings 3 года назад

    Does this work with the stock esc??

    • @RunThatRC
      @RunThatRC  3 года назад +1

      you would need to upgrade your electronics unfortunately. Specially if you want your shift function to work.

  • @sahelth5572
    @sahelth5572 3 года назад

    can I put this engine on wpl c44km?

    • @RunThatRC
      @RunThatRC  3 года назад +1

      the C44KM I believe comes with this gearbox and motor from the factory.

    • @sahelth5572
      @sahelth5572 3 года назад

      Run That RC yes I belive too , but I want ask for this motor have three speeds or no?

  • @Jtyt735
    @Jtyt735 4 года назад

    Where does the servo wire go?

    • @RunThatRC
      @RunThatRC  4 года назад

      You have to use your own transmitter and receiver that has another 2 position channel or the WPL V2/V3 tx/rx kit. The RTR wpl does not have the ability to use the 2 speed.