I always just change both numbers in cricket because they resize it so what they think it should be not what you want it to be. This way you’re guaranteed to have the correct sizes. Besides the company themselves you have explained this better than anybody on YT and I certainly appreciate you. Thank you for showing your mistakes.
Marilyn, Thank You so much for this video. You did an awesome job. You have brought some clarity to this process. From one TRW CREW member to another, this tutorial is FREAKIN SWEEEEET!!!
Hi Tanyu and Marilyn. Yes this was a great one. I watched a different one about resizing in Design Space and I was so confused on the process. Thank you Marilyn for the tutorial.
@@MarilynDIAZDESIGNS I only have the tiny little Cricut Joy so this isn't something I'd be able to do but it does give me something to aspire to in the future if I ever do get one of the bigger machines.
Truly amazing video and I want to thank you for sharing your knowledge. It is very much appreciated. I do have a question regarding my flock. When it finished and I pulled the flock away from the sheet, I had to poke all the holes myself. Can you tell me why? That's a whole lot of poking lol. First time newbie, so any advise you can give me would be welcome. Thanks again.
So happy I found this video. I bought this template and was having a hard time in DS but your video helped alot. Will you by chance be doing a video for the updated file that included the lid and stirp? I'm having trouble with lid and strip rhinestone template. 😫
Hi Marilyn! Great video! Do you have a suggestion or it could just be DS - but I get to the point ready to cut, and it allows me to load my mat, and then when I hit cut, it freezes on "preparing". I've tried both my Maker and Explore. Any thoughts as to why it wouldn't go further?
Erin Young that is completely a DS issue. I haven’t used cricut in a couple weeks however using the web version allows you to cut it immediately with no issues and I know they are doing away with the web version, so if it’s still live, use DS web, if not, I’d contact Cricut. You can find a tiny link at your start up page if it’s still there!
Take it out of the box! Do your first project that comes with it, try an iron on image, make sure to mirror your iron on and get acclimated with your machine so you can do this! You'll be addicted! 🙃
Cricut explore air 2 cant find flocked iron setting :( I think the magnet sheet 0.6 works Will let u know after the hr long cut process is complete.. regardless ur tutorial is a life saver
Hi Marilyn, can I use my Explore Air to cut my rhinestone template or would it have to be the Cricut Maker? Thanks in advance! I loved your video btw! :)
Hi great video. Can I use a Cricut maker to do this or do I need an Explore Air Cricut? I’m trying to decide which machine to buy as I like decorating Starbucks cups and mugs etc thank you
Thank you for this video. I did everything you said as far as settings. I just got the Explore 2. But my flock iron-on, which i had to add in Material Settings, did not do what you did. 220 and everything. The whole hour it was just marking circles on the flock material. What can I do differently so it cuts?
Increase your pressure! Cricut must be doing something in the background to the software because when I went to cut my last few templates, I also had to increase from 220 and when I tried 225, it still didn't have a clean peel. Try a setting of 240. DO A SMALL SQUARE with 4 tiny circles within the square and see how it cuts. Keep using your fine point blade and revise your Flock setting that you made. Play with the pressure and do small test cuts!!! Im so frustrated with design space. Good luck!
No, once you put it on something, if you apply it with water, it’s moveable for a little bit, but once it’s on the surface, it’s there permanently. Now if you try to remove it much later, you may pop the rhinestones off while removing it. I would recommend using it on something you don’t plan to remove. It worked best on a completely flat surface. I have a decal on a stainless glass, my laptop computer, my car window, etc.
Hello Marilyn, I was wondering it you experienced any problems with the size of the rhinestone holes when you cut it out? I purchased the template mini pack 3 for the acrylic tumbler, but when I cut out the rhinestone layer the holes are a little large for my size SS10 rhinestones.
Marilyn...thanks for the video, I loved it. I love all your tutorials. I am a cricut user and wanted to know if I imported the SVG into Sure Cuts a Lot 5 to get the measurements will that work?
Not sure! I would try but inkscape is much closer to a major design program and its free. I haven't used scal in a long time. I included a link in this video where it shows you how to bring it in on inkscape! Thank you for your kind words and for watching!
Thank you sooooo much, no one explains how to get the correct size in Cricut. Can you tell me how many rhinestones you buy for the 24oz cup and what temp was your heat press on?
I had rhinestones already, however I believe there are between 2400-2500 rhinestones give or take. My heat press was set to 320° and my max time to press is 15 seconds.
@@Nvsandcreations there are 144 stones in one gross. Times that by 10 (gross) and you'll get the total of stones. For clothing or for pressing with heat, you'll want hotfix stones. Standard size and size I use is SS10. Flatback rhinedtones are for gluing by hand.
hello i did everything in your video , i bought the template from rhinestone world when i upload on cricut the lid and believe straw template comes up too how can i just get the rhinestone wrap and the vinyl wrap templates with out the straw and lid
Hi Marilyn. Great Video! I need help! when I started applying the sticker alot of the rhinestones came off...Is it because I did not press it enough? Please help...Thanks
Did you press htv first? And did you make sure to press on the shiny side of the decal? You want the part that you peel off in the back. If you did this correctly then perhaps your temp or pressure is not enough.
I had to create my own. Go to "make it", when selecting materials, select "browse materials, then scroll all the way down and select Create Material or (whatever it says to create your own. Make sure the fine point blade is used, make your own name, FLOCK, then do a pressure of 220 and SAVE your new material and favorite it so you can always access it. Make sure to do a test cut before cutting your big file. Make a half inch square and create a circle in the size .130 (the size of ss10). Put that little circle in a square and use this as your test cut. If everything cuts perfect, that's your new setting. If it cuts the circle perfect and your backing is still there, GREAT. If your circle didn't cut all the way. Increase pressure for 5 or 10. If it cuts all the way through the white backing, DECREASE your pressure. Hope this helps!
Hi.. thanks for this video, I love you explantion... I can't wait to try, but the only material I can't find is bling everything material" when a put on Google just show me hotfix.... can you help me please?
Angelica Muniz Lol! No I haven’t done that yet, perhaps I will try it tomorrow, IF I can find the tumbler! I still haven’t found one yet. Angelica, just download the free version of Inkscape! Super easy!
I’m having a hard time finding the Plastic ones for some reason they are not getting the lids for them and they cannot sell that’s why I went with the acrylic ones . Thanks so much For all your help.
@@angelicamuniz5643 yeah when I went looking for the plastic ones, they had blue lids and I didnt want those. So the manager said, all I have is white lids no cups, so if you buy all the cups from the store down the street with blue lids, come back and well switch them out for white lids. Lol. So I did. Now I can't find the acrylic one.
Linda Alvarez hmmm....it is in alphabetical order. What machine are you using? Try the flocked paper but increase that to 220 pressure and cut a half an inch square with a .131 circle (that the size of a rhinestone hole) as a test cute before you cut something big. See what happens. If you try another setting, make sure the setting co-insides with the fine point blade.
I buy them from TRW. They are called hot fix rhinestones. The size I use and is standard is SS10. there are 144 stones in one gross. You can Google what hotfix rhinestones if you want to buy elsewhere.
Marilyn DIAZ DESIGNS thank you so much one more question in TRW they don’t have the Bling anything Decal is there another place where we can purchase that material ?
@@Nvsandcreations no there's not, keep checking every day!!! He's supposed to have more in soon. Subscribe to their RUclips to go on the lives and he'll give us updates! There's a live tomorrow!
I still haven’t been able to get my maker to cut the flock for the rhinestone it freezes I did do every step you said any other suggestions I can try or do you think it’s a design space issue
I followed exactly the way you said when I try to upload on design space it’s not supporting some of the element And it’s taking forever to Upload on designs please
So I’m having the worst time trying to upload the design. I downloaded the design after purchase, it opened in Inkscape and I saved it there. Now it is so large it won’t upload. My DS Has a message thread and orange along the top saying “wow this is a big image this may take a while” and then the screen will just go blank and it never does upload. Any recommendations???
The decal is extremely strong. I personally like the double acrylic wall cups that are taller because the lids rim and top are completely flat, unlike these, and once that decal is on, its not coming off. The rhinestones are hotfix so they are pressed into the decal so they're on there for good and the other side you peel off to stick to the cup is really hard to lift off. Once its on there, the cup is good. The acrylic cup is much better.
I send my new cup template to my Cricut explore air 2 and it does not work it just says preparing and that is it does not move from there. I’m confused from there. Can you help me please.
crystal alvarez are you using the craft file? If not, try that. HOWEVER, Cricut has issues today. I had been trying to cut vinyl for several projects today and it seems to be having the same issues. Exit out, restart your computer and try again. I think it’s cricut today.
Marilyn DIAZ DESIGNS I have the craft file and I added it have been trying for a few days now I had bought the file without lid and I test cut first. Then I got the new file with lid and now it does not want to work. I’m trying to cut out the rhinestone template. I can cut the vinyl.
Well thats not very nice. Lol. But they are diamond cut crystal rhinestones. Perhaps the vibrancy of the stones didn't come through as beautiful as they are in person. To each his own.
I always just change both numbers in cricket because they resize it so what they think it should be not what you want it to be. This way you’re guaranteed to have the correct sizes. Besides the company themselves you have explained this better than anybody on YT and I certainly appreciate you. Thank you for showing your mistakes.
Marilyn, Thank You so much for this video. You did an awesome job. You have brought some clarity to this process. From one TRW CREW member to another, this tutorial is FREAKIN SWEEEEET!!!
Hey Tanya, Thank you! I see you in the lives allllll the time! Lol! ❤️
Hi Tanyu and Marilyn. Yes this was a great one. I watched a different one about resizing in Design Space and I was so confused on the process. Thank you Marilyn for the tutorial.
tanyu antone hiooo
All my questions were answered trough the video, the result was very pretty and the technics she showed are not easy to find anywhere else
Those rhinestone cups are so pretty.
Jillian Chiavarone thank you!
@@MarilynDIAZDESIGNS I only have the tiny little Cricut Joy so this isn't something I'd be able to do but it does give me something to aspire to in the future if I ever do get one of the bigger machines.
This tutorial was so helpful! Thank you for explaining everything so well.
This was so much fun to watch! It felt great to see how much you loved this one.
Bless you for figuring this out for us! So much easier..
I got a headache watching the other guy lol
Great tutorial. I also watched the TRW videos and was in awe.
Sandra Fitzhugh thank you! I’m on TRWs live now! Lol
I love how the pink came out😍👏👏. Great tutorial.I already wanted to order but u made me want to order more 😆 😂 lol.
I cant wait to try this method....this machine never seems to amaze me. great job!!!!
So pretty! Thanks for sharing this! Can’t wait to get my circuit for Christmas
Truly amazing video and I want to thank you for sharing your knowledge. It is very much appreciated. I do have a question regarding my flock. When it finished and I pulled the flock away from the sheet, I had to poke all the holes myself. Can you tell me why? That's a whole lot of poking lol. First time newbie, so any advise you can give me would be welcome. Thanks again.
No we are going to need to go to Starbucks and fill up on Lattes after this. Great tutorial, Marilyn.
Miss you girls! I planned on visiting today!
loved this video you did an awesome job at explaining everything!!
I love 💕 your video, nice explanation 👏👍👌 😀 love love it 🌹
So happy I found this video. I bought this template and was having a hard time in DS but your video helped alot. Will you by chance be doing a video for the updated file that included the lid and stirp? I'm having trouble with lid and strip rhinestone template. 😫
I can!! Thank you!!!
@@MarilynDIAZDESIGNS thank you! 🤗
These look great!
Hi Marilyn! Great video! Do you have a suggestion or it could just be DS - but I get to the point ready to cut, and it allows me to load my mat, and then when I hit cut, it freezes on "preparing". I've tried both my Maker and Explore. Any thoughts as to why it wouldn't go further?
Erin Young that is completely a DS issue. I haven’t used cricut in a couple weeks however using the web version allows you to cut it immediately with no issues and I know they are doing away with the web version, so if it’s still live, use DS web, if not, I’d contact Cricut. You can find a tiny link at your start up page if it’s still there!
How much would you price these cups for? Thank you so much for your video you covered so much information and questions I had!!
I love this, just curious to know why you didn't want to put them on the old fashion way?
Great video. Have you applied to any other style cups? Like the hard plastic or stainless steel?
I have done the hard acrylic versions as well! Thank you!
Great job on the video. I hope to make one of these some day but don’t have a heat press. Will the Easy Press work?
Thank you for this tutorial. I was having a very hard time with the template measurements.
OFE KELLER I hope it helped! Good luck!
Do you need hot fix rhinestones for this to work, or can I use flat back rhinestones ?
Great vid, very informative.
GORGEOUS
This video was very helpful. Thank you so much for the explanation.
Take it out of the box! Do your first project that comes with it, try an iron on image, make sure to mirror your iron on and get acclimated with your machine so you can do this! You'll be addicted! 🙃
Cricut explore air 2 cant find flocked iron setting :(
I think the magnet sheet 0.6 works
Will let u know after the hr long cut process is complete.. regardless ur tutorial is a life saver
Oh no!!! Did it work??
We also need the hot press?? ALSO are they water proof?
Hi Marilyn, can I use my Explore Air to cut my rhinestone template or would it have to be the Cricut Maker? Thanks in advance! I loved your video btw! :)
You can use your explore air! Make sure to do a test cut first.
Hi great video. Can I use a Cricut maker to do this or do I need an Explore Air Cricut? I’m trying to decide which machine to buy as I like decorating Starbucks cups and mugs etc thank you
I ended up cutting my templates on the maker. I have both but the maker can cut much more materials than the air.
Marilyn DIAZ DESIGNS Thank you for the response ☺️
How does it hold up with condensation from cold drinks? Does that make it peel off?
Are you placing the glitter vinyl face down on the cricut mat for cutting?
What is that that you are using to brush your rhinestones in the holes???
A little paint brush. You can get these at your local hardware store!
Loved this video very HELPFUL! What was in the spray bottle that you sprayed the cup with?
Thank you.. Just water. Sorry I guess I didn't mention that.
I don't think I can do this with my little heat press yours looks professional. I don't have that kind of space.
Thank you for this video. I did everything you said as far as settings. I just got the Explore 2. But my flock iron-on, which i had to add in Material Settings, did not do what you did. 220 and everything. The whole hour it was just marking circles on the flock material. What can I do differently so it cuts?
Increase your pressure! Cricut must be doing something in the background to the software because when I went to cut my last few templates, I also had to increase from 220 and when I tried 225, it still didn't have a clean peel. Try a setting of 240. DO A SMALL SQUARE with 4 tiny circles within the square and see how it cuts. Keep using your fine point blade and revise your Flock setting that you made. Play with the pressure and do small test cuts!!! Im so frustrated with design space. Good luck!
I love this video. I will be doing this real soon.
Is there something else you can use instead of the bling anything that is sold at a craft store? thanks !!!
Great video! So the bling anything can be reused over & over?
No, once you put it on something, if you apply it with water, it’s moveable for a little bit, but once it’s on the surface, it’s there permanently. Now if you try to remove it much later, you may pop the rhinestones off while removing it. I would recommend using it on something you don’t plan to remove. It worked best on a completely flat surface. I have a decal on a stainless glass, my laptop computer, my car window, etc.
Hello Marilyn, I was wondering it you experienced any problems with the size of the rhinestone holes when you cut it out? I purchased the template mini pack 3 for the acrylic tumbler, but when I cut out the rhinestone layer the holes are a little large for my size SS10 rhinestones.
Awesome job! Thank you.
Marilyn...thanks for the video, I loved it. I love all your tutorials. I am a cricut user and wanted to know if I imported the SVG into Sure Cuts a Lot 5 to get the measurements will that work?
Not sure! I would try but inkscape is much closer to a major design program and its free. I haven't used scal in a long time. I included a link in this video where it shows you how to bring it in on inkscape! Thank you for your kind words and for watching!
Hi Marilyn, just stumble on this video which is awesome and very detailed. Thanks for that information.
Thank you sooooo much, no one explains how to get the correct size in Cricut. Can you tell me how many rhinestones you buy for the 24oz cup and what temp was your heat press on?
I had rhinestones already, however I believe there are between 2400-2500 rhinestones give or take. My heat press was set to 320° and my max time to press is 15 seconds.
GREAT tutorial!! Thank you for sharing your method. Where did you purchase your rhinestones from?
Meoshameka Taylor purchased them at the rhinestoneworld
Meoshameka Taylor but they have so many kind which do you specific buy and what does mean when it says 10-gross ?
@@Nvsandcreations there are 144 stones in one gross. Times that by 10 (gross) and you'll get the total of stones. For clothing or for pressing with heat, you'll want hotfix stones. Standard size and size I use is SS10. Flatback rhinedtones are for gluing by hand.
How many gross do you need for one cup?
What is bling anything material in Uk 🇬🇧 guys. Desperate
Can you do it without the glitter vinyl ? Like just press the rhinestone onto the bling anything ?
You can, however the outcome is not that appealing.
Hi beautiful! GREAT video! With the Cricut Maker- what blade did you use for the Magic Flock??
Be so blessed💛💛💛
I just used the fine point carbide blade
Will this measurement work in silhouette studio or do I have to resize? Thanks
On the rhinestone world website it says “hot-fix rhinestones” and “flat back rhinestones” which did you use?
hello i did everything in your video , i bought the template from rhinestone world when i upload on cricut the lid and believe straw template comes up too how can i just get the rhinestone wrap and the vinyl wrap templates with out the straw and lid
What is the bling anything material? Is there a cheaper version elsewhere?
Hi Marilyn. Great Video! I need help! when I started applying the sticker alot of the rhinestones came off...Is it because I did not press it enough? Please help...Thanks
Did you press htv first? And did you make sure to press on the shiny side of the decal? You want the part that you peel off in the back. If you did this correctly then perhaps your temp or pressure is not enough.
Can this be done with the Cricut heat press?
Yes ma'am!!!
@@MarilynDIAZDESIGNS yay! ok I will be starting this project soon!!
I have a Cricut explore air 2. It doesn’t have the setting you mentioned in video. What do you suggest?
I had to create my own. Go to "make it", when selecting materials, select "browse materials, then scroll all the way down and select Create Material or (whatever it says to create your own. Make sure the fine point blade is used, make your own name, FLOCK, then do a pressure of 220 and SAVE your new material and favorite it so you can always access it. Make sure to do a test cut before cutting your big file. Make a half inch square and create a circle in the size .130 (the size of ss10). Put that little circle in a square and use this as your test cut. If everything cuts perfect, that's your new setting. If it cuts the circle perfect and your backing is still there, GREAT. If your circle didn't cut all the way. Increase pressure for 5 or 10. If it cuts all the way through the white backing, DECREASE your pressure. Hope this helps!
Where did you get the bling anything material???
Can you heat press with the cricut press?
Hi.. thanks for this video, I love you explantion... I can't wait to try, but the only material I can't find is bling everything material" when a put on Google just show me hotfix.... can you help me please?
Unfortunately, its been selling out at TRW but I would check every day in the mornings. He's the only one that sells it, pretty much.
@@MarilynDIAZDESIGNS Thanks for answer me... i will waiting for
you are a life saver. I was really about to pull my hair out and hit my Cricut with a hammer.
Don't do it!!! Lol. Use the web version for now to cut your big rhinestones templates!
Can this be done with the joy
Hi thanks for doing this tutorial. By chance have you done the 24oz acrylic cups ?If so do you know the measurements ? TIA
Angelica Muniz Lol! No I haven’t done that yet, perhaps I will try it tomorrow, IF I can find the tumbler! I still haven’t found one yet. Angelica, just download the free version of Inkscape! Super easy!
Marilyn DIAZ DESIGNS no worries I was able to download the Corel trial software but yes I also have Inkscape as well . I got it thanks for your help .
Well I think I got it hopefully as soon as I get it for sure I will be happy to share . Thanks again
I’m having a hard time finding the Plastic ones for some reason they are not getting the lids for them and they cannot sell that’s why I went with the acrylic ones . Thanks so much
For all your help.
@@angelicamuniz5643 yeah when I went looking for the plastic ones, they had blue lids and I didnt want those. So the manager said, all I have is white lids no cups, so if you buy all the cups from the store down the street with blue lids, come back and well switch them out for white lids. Lol. So I did. Now I can't find the acrylic one.
Are you just spraying it with water?
Yes, I sprayed it with water so it doesn't stick to quickly so it gives me time to adjust placement.
I do not see the Flocked Iron On. My DS only Flocked paper. Am I missing something?
Linda Alvarez hmmm....it is in alphabetical order. What machine are you using? Try the flocked paper but increase that to 220 pressure and cut a half an inch square with a .131 circle (that the size of a rhinestone hole) as a test cute before you cut something big. See what happens. If you try another setting, make sure the setting co-insides with the fine point blade.
@@MarilynDIAZDESIGNS I am using a cricket 2. I ended up using fabric setting. Hopefully it works. Its still cutting. Thank you for the advice!!
I try buying the Rhinestone but they have so many brands which one are they ? Also they say 10-gross what is that ? Can we buy the stones elsewhere ?
I buy them from TRW. They are called hot fix rhinestones. The size I use and is standard is SS10. there are 144 stones in one gross. You can Google what hotfix rhinestones if you want to buy elsewhere.
Marilyn DIAZ DESIGNS thank you so much one more question in TRW they don’t have the Bling anything Decal is there another place where we can purchase that material ?
@@Nvsandcreations no there's not, keep checking every day!!! He's supposed to have more in soon. Subscribe to their RUclips to go on the lives and he'll give us updates! There's a live tomorrow!
How dose the htv stick to the cup
I followed the steps to a tee and my magic flock didn’t cut out nicely. It’s like i have to pull each circle out myself
Do you sell the rhinestone decals? If so, how much?
How many rhinestones did you use?
With that svg can we Edit the size of the holes?
I think its between 2400-2500.
Do you have a link for the bling anything material
I still haven’t been able to get my maker to cut the flock for the rhinestone it freezes I did do every step you said any other suggestions I can try or do you think it’s a design space issue
I followed exactly the way you said when I try to upload on design space it’s not supporting some of the element
And it’s taking forever to Upload on designs please
So I’m having the worst time trying to upload the design. I downloaded the design after purchase, it opened in Inkscape and I saved it there. Now it is so large it won’t upload. My DS Has a message thread and orange along the top saying “wow this is a big image this may take a while” and then the screen will just go blank and it never does upload. Any recommendations???
I rebooted my computer and attempted to change the size settings in Inkscape and still it won’t upload to DS
Thank youuuu!!
It's my pleasure to help!
About how many rhinestones do you use on these cups?
Alexis Clyde I think it’s between 2400-2500! Somewhere around there.
Can this be done with the Cricut Easy Press?
T Me yes, you can press rhinestones to HTV with the easy press. I have it done it many times. At minimum, a temperature of 320 with pressure.
thank you I could not figure ou the measurement with the weed box that you couldn't ungroup
hi how do you wash these without messing them up?
The decal is extremely strong. I personally like the double acrylic wall cups that are taller because the lids rim and top are completely flat, unlike these, and once that decal is on, its not coming off. The rhinestones are hotfix so they are pressed into the decal so they're on there for good and the other side you peel off to stick to the cup is really hard to lift off. Once its on there, the cup is good. The acrylic cup is much better.
@@MarilynDIAZDESIGNS thankyou for the v reply! :)
Does TRW have a template to bling face mask? Do you have a tutorial for that?
They do! I just got it last night. Checkbout their site.. I can do a tutorial for it.
How much are the Starbucks cups?
What size are the rhinestones?
SS10
Where do you get the Starbucks cups??
at various Starbucks locations.
I send my new cup template to my Cricut explore air 2 and it does not work it just says preparing and that is it does not move from there. I’m confused from there. Can you help me please.
crystal alvarez are you using the craft file? If not, try that. HOWEVER, Cricut has issues today. I had been trying to cut vinyl for several projects today and it seems to be having the same issues. Exit out, restart your computer and try again. I think it’s cricut today.
Marilyn DIAZ DESIGNS I have the craft file and I added it have been trying for a few days now I had bought the file without lid and I test cut first. Then I got the new file with lid and now it does not want to work. I’m trying to cut out the rhinestone template. I can cut the vinyl.
crystal alvarez did this work for you yet? I know DS was having issues. Hoping you got it to work!
Marilyn DIAZ DESIGNS I have not tried it since was planing on trying again today. I will let you know what happens.
crystal alvarez ok, cool. Keepin my fingers crossed for you!
Gorgeous but to complicated.
any one else think these look cheap compared to glass crystals put on by hand ? or is it just me
Well thats not very nice. Lol. But they are diamond cut crystal rhinestones. Perhaps the vibrancy of the stones didn't come through as beautiful as they are in person. To each his own.
Girlfriend you need something to hold that cup steady
Lol, I know! I figured it out! 🤓
Maybe you should practice more before posting a video, you loose your audience when you take to long
Lol! Ok!
@@MarilynDIAZDESIGNS YOU DID AMAZING
What color are the stones you used for the pink cup? Just plain pink?
All the rhinestones I have used are SS10. That is the standard size and the size for everything I have made thus far.