Hi Andrej, download the dynabridge package. But it does not display the Local Coordinate Systems by Grid package and the Local Coordinate Systems package.Where can I download it? Thank you
super, but my question how you can analysis this structure in Robot for exemple, or any other structural software, because i create the same example but no analytical model.
Hi Andrzej, I install DynaBridge V0.0.8 and run on Revit 2020.2 (Dynamo Core 2.3.0.5885 & Dynamo Revit 2.3.0.6270). I get warning ‘invalid input’ on all DynaBridge custom nodes that there is no input text on any node, but the workflow work like your RUclips tutorial above. I have updated package ‘Clockwork for Dynamo 2.x, V2.1.2’ but it’s not help. Can you write to us how we can fix the issue? Thank you.
a great job, but when I tried to build my bridge that has different elevation at the beginning and the end, it has not worked. I've tried with your example changed the elevation in the last coordinate (121.5 to 122) and it has not worked either. The question is? Dynabridge only works in the case when the beginning and the end are in the same elevation. Thank you
@@andrzejsamsonowicz2011 I have this problem while doing this example: some segments of the bridge not generated. Using Revit 2019 Dynamo COre 1.3.3.4111, Dynamo Revit the same, but down it reads "2.03.0". Any feedback would be very helpful Thanks
Excellent! I try to do the same thing with the 0.0.8 package according to this video, everything is good except that I can't create the Safety Barrier, I don't know what's wrong...Please help me, thanks!! : )
And another problem is that some bridge bodies didn't exist when I used the original node 'Bridge body', they existed after I changed 'x-180' to '180' with the node 'If' in the node 'Bridge Body', but there is a problem of the edges of each bridge body...
Andrzej Samsonowicz Chodzi mi o punkt koło 2:19 na filmie. Mam zmapowane współrzędne, jednak gdy chce utworzyć link używając algorytmu 'Create 3D line', ta linia się nie tworzy i mam komunikat 'null', mówiący że output jest pusty. Dzięki z góry za odpowiedź. Pozdrawiam
Hi Andrzef I have a problem to execute your sequence. In the first step, when we load the excel, the project base point does not do it well. in the N / S indicates 121.50 in the E / O indicates 0.000 and in ELEV indicates 135424 It's like the node does not read the columns correctly and as a result the create 3d line does not work I am using dynabridge 0.0.6 and I have also tested it with version 0.0.7 If you have any thoughts about what can happen and how can I solve it, I thank you
are you using your own excel file? if yes, make sure that the columns correspond to x,y and z corrdinates respecively (a not y,x,z). if your 3d line doesn't appear: 1. make sure that you have the family "3d line" loaded into the project, 2. edit the 3d line node (double click) and make sure that the family is selected - there is a node on the left bottom which allows to select a family...
I'm using the dynabridge sample file, so I do not understand anything. Anyway, thank you very much for the reply and I will continue trying with my excel files. Regarding the family of the 3d line, I did not have it loaded. ;-)
@@arslanchariyev6752 , Hello, you usually have to wait for the first update in September or October to fix the problems. This is how it is for most Autodesk software.
Hi Andrej, download the dynabridge package. But it does not display the Local Coordinate Systems by Grid package and the Local Coordinate Systems package.Where can I download it? Thank you
Hi Andrej, what a fantasic work. I am wonder can I edit the bridge profile family for different segment type?
Can I use it in any later version of Revit like 2020?
super, but my question how you can analysis this structure in Robot for exemple, or any other structural software, because i create the same example but no analytical model.
Hi Andrzej. At "Local Coordinate Systems By Grids" node, why did you set the X axis on Vector Z way? Thank you.
Hi Andrzej,
I install DynaBridge V0.0.8 and run on Revit 2020.2 (Dynamo Core 2.3.0.5885 & Dynamo Revit 2.3.0.6270). I get warning ‘invalid input’ on all DynaBridge custom nodes that there is no input text on any node, but the workflow work like your RUclips tutorial above. I have updated package ‘Clockwork for Dynamo 2.x, V2.1.2’ but it’s not help. Can you write to us how we can fix the issue? Thank you.
Do you have a version of the family type cross section used at 4.43or a tutorial on how to create this?
Thanks
Good. Do you already know the tutorial to create the family type cross section?
@@rinama26 can you explain how create 3 adaptive point family? I need a different cross section
a great job, but when I tried to build my bridge that has different elevation at the beginning and the end, it has not worked.
I've tried with your example changed the elevation in the last coordinate (121.5 to 122) and it has not worked either.
The question is? Dynabridge only works in the case when the beginning and the end are in the same elevation.
Thank you
no, it should work... did you get some specific error? some segments of the bridge were not generated?
It does not report any error and does not generate any segment of the structure
@@andrzejsamsonowicz2011 I have this problem while doing this example: some segments of the bridge not generated. Using Revit 2019 Dynamo COre 1.3.3.4111, Dynamo Revit the same, but down it reads "2.03.0". Any feedback would be very helpful Thanks
Excellent! I try to do the same thing with the 0.0.8 package according to this video, everything is good except that I can't create the Safety Barrier, I don't know what's wrong...Please help me, thanks!! : )
And another problem is that some bridge bodies didn't exist when I used the original node 'Bridge body', they existed after I changed 'x-180' to '180' with the node 'If' in the node 'Bridge Body', but there is a problem of the edges of each bridge body...
I got the same problem with 0.0.8. 3rd and 7th bodies didn’t exist.
same problem too
Hi Andrzej,Do you have a later version of the files. I have a 2017 version of Revit. Thank you.
may I ask for supporting data for rfa (Family) and others, I don't understand what the familiy is like, please?
Cześć Andrzej, na samym początku nie jestem w stanie stworzyć linii 3D, czy wiesz może co może być przyczyną ? :)
sprawdź, czy ją załadowałeś do pliku projektowego. wszystkie rodziną pobierają się wraz z pakietem do folderu "extra"
Andrzej Samsonowicz
Chodzi mi o punkt koło 2:19 na filmie. Mam zmapowane współrzędne, jednak gdy chce utworzyć link używając algorytmu 'Create 3D line', ta linia się nie tworzy i mam komunikat 'null', mówiący że output jest pusty. Dzięki z góry za odpowiedź. Pozdrawiam
Hi Andrzef
I have a problem to execute your sequence. In the first step, when we load the excel, the project base point does not do it well.
in the N / S indicates 121.50
in the E / O indicates 0.000
and in ELEV indicates 135424
It's like the node does not read the columns correctly
and as a result the create 3d line does not work
I am using dynabridge 0.0.6 and I have also tested it with version 0.0.7
If you have any thoughts about what can happen and how can I solve it, I thank you
are you using your own excel file? if yes, make sure that the columns correspond to x,y and z corrdinates respecively (a not y,x,z). if your 3d line doesn't appear: 1. make sure that you have the family "3d line" loaded into the project, 2. edit the 3d line node (double click) and make sure that the family is selected - there is a node on the left bottom which allows to select a family...
I'm using the dynabridge sample file, so I do not understand anything.
Anyway, thank you very much for the reply and I will continue trying with my excel files.
Regarding the family of the 3d line, I did not have it loaded. ;-)
Can I have the 3pt family...tutorial please...selracdrv@hotmail.com
Hi Andrzej,Do you have a version of the files. I have a 2019 version of Revit. Thank you.
Hey, have you found the properly working for new Revits? I have 2021 and the latest version of this package seems bugged.
@@arslanchariyev6752 ,
Hello, you usually have to wait for the first update in September or October to fix the problems.
This is how it is for most Autodesk software.
I need the Families file.. can u uplode it please?
Hi Andrej, how we can fine your excel ?
ruclips.net/video/JPeURw0kpVE/видео.html
can you please share adaptive family's
ruclips.net/video/JPeURw0kpVE/видео.html
adaptive family's are in the package folder
how to creat beam family?please
Can I have a sample of that dynabridge family... selracdrv@hotmail.con.. Thanks
do not create 3d line :(
you have to create a family model adaptive metric generic, place two adaptive points of placement and draw a line joining the points
3d line didnt created ! why ?
Load "3d line.rfa" family from Dynabridge package
@@levangabuldani5432 oh thanks!