There should be adjustment screws in the back, it might also help to loosen the mounting bolts and position the lights so it points more inwards before re-tightening the mounting bolts.
Good video, only one question though. I noticed that these lights had harnesses that fit the factory harnesses in the car. I also noticed some white and black wires that are not connected to anything and pushed out of the way around 4:50. What do these wires go to and why aren't they attached to anything?
I installed these in my 2009 4dr Civic and they look great, BUT, the headlights are not pointing straight. I have a HID kit as well and the lights work well and are bright BUT are pointing outwards instead of straight. \___/ instead of |____|
On certain headlights we do wire it to the headlight harness. But on other ones there are no provisions for the driving light to wire to on the headlight end of the harness. Also to give the customers options to where they would like to wire their LED's and Halos to.
As far as the high and low beams goes, we wouldnt suggest putting it in the High beams because HID's need a while to warm up therefor it would almost be pointless unless you leave the HID's on for a while. For the headlight adjustment please contact our customer service team and they will be happy to help you with it!
The low beam bulbs went out on 2010 HONDA CIVIC SI 4 DOOR PROJECTOR HEADLIGHTS. Where can i get replacement bulbs? Or at the local auto part store or through your web site?
La única diferencia es la instalación de los bulbos H1 en nuestros faros frente a las bombillas regulares será dentro de la carcasa. Los alambres postive y negitave estará en la carcasa. Así que tendría que obtener el poder en el ballist HID que conecta a la bombilla H1
sí es posible que tenga que cortar un agujero detrás de la cubierta del faro. o bien podría ser una pieza de goma o pieza de plástico. Debe haber una arandela de goma que viene con el kit de HID que sellar el agujero.
On a honda civic it would be ok since the honda leaves the low beam on at the same time as the high beam. The time it takes to warm up the hi beam you would still have the low beam on so there would be no loss of light.
I just installed these on my Honda Civic 2010. They look cool, but the halo's and LED's aren't that bright compared to the picture. Is there a way to brighten them up?
Ok, entiendo pero como haria la coneccion de la balastra a la coneccion de plug (donde se conectan los faros), tendria que hacer una modificacion a la instalacion del cableado de las luces?
Me podrian ayudar con la instalacion de un Kit de Xenon en unos faros doble ojo de angel con lupa de Neon 2000, los faros ojo de angel los compre hace un tiempo con ustedes pero recien me regalaron un KIT Xenon y no se como instalarlo porque los dos focos H1 de los faros estan unidos al mismo cable que va al carro
would love to install my headlights orderd a set of HID Xenon + 06-11 Honda Civic CCFL Angel Eye Halo Projector Headlights - Black but have been waitting 2 weeks now and they havent even shiped them are you guys a part of pro tuning labs?
im having a hard time to calibrate my fog lights, as the comment from "raheelk23" its very hard to fix the headlights direction. Any ideas ? because i tried to do it and the high beam mirror dismounted. Can you guys help me, im from venezuela. im about to put back the original headlights. another question, can i put HID's on both high and low beams ?
Thank you! and yes those wires are for the halos and led's there is another video that shows you how to connect them
There should be adjustment screws in the back, it might also help to loosen the mounting bolts and position the lights so it points more inwards before re-tightening the mounting bolts.
Thank you! and check if the bulbs are fully seeded in. They should be pretty bright
Good video, only one question though. I noticed that these lights had harnesses that fit the factory harnesses in the car. I also noticed some white and black wires that are not connected to anything and pushed out of the way around 4:50. What do these wires go to and why aren't they attached to anything?
Make sure the bulb is placed all the way in the housing.
I installed these in my 2009 4dr Civic and they look great, BUT, the headlights are not pointing straight. I have a HID kit as well and the lights work well and are bright BUT are pointing outwards instead of straight. \___/ instead of |____|
Thanks so much for this instructional, so helpful!
On certain headlights we do wire it to the headlight harness. But on other ones there are no provisions for the driving light to wire to on the headlight end of the harness. Also to give the customers options to where they would like to wire their LED's and Halos to.
As far as the high and low beams goes, we wouldnt suggest putting it in the High beams because HID's need a while to warm up therefor it would almost be pointless unless you leave the HID's on for a while. For the headlight adjustment please contact our customer service team and they will be happy to help you with it!
the led for the halo has fallen into the light casing how van i fix this?
+Carlos Ortega This video can help you with the little problem you are having. ruclips.net/video/WflXNxQhlWQ/видео.html
The low beam bulbs went out on 2010 HONDA CIVIC SI 4 DOOR PROJECTOR HEADLIGHTS. Where can i get replacement bulbs? Or at the local auto part store or through your web site?
Heather Lo Yes you can go to your local auto-shop to pick up replacement bulbs. Both your high and low beam bulbs are H1 bulbs.
Yes please go to k2motor DOT com to see the sample pictures.
La única diferencia es la instalación de los bulbos H1 en nuestros faros frente a las bombillas regulares será dentro de la carcasa. Los alambres postive y negitave estará en la carcasa. Así que tendría que obtener el poder en el ballist HID que conecta a la bombilla H1
sí es posible que tenga que cortar un agujero detrás de la cubierta del faro. o bien podría ser una pieza de goma o pieza de plástico. Debe haber una arandela de goma que viene con el kit de HID que sellar el agujero.
Do you have a picture/video of the projector with R8 style LED on this car (8th gen Civic)?
On a honda civic it would be ok since the honda leaves the low beam on at the same time as the high beam. The time it takes to warm up the hi beam you would still have the low beam on so there would be no loss of light.
I just installed these on my Honda Civic 2010. They look cool, but the halo's and LED's aren't that bright compared to the picture. Is there a way to brighten them up?
Ok, entiendo pero como haria la coneccion de la balastra a la coneccion de plug (donde se conectan los faros), tendria que hacer una modificacion a la instalacion del cableado de las luces?
Does it matter if it is an SI civic or a regular civic?
pvtkuhn No, the fitment is still the same on all Civic Models.
Me podrian ayudar con la instalacion de un Kit de Xenon en unos faros doble ojo de angel con lupa de Neon 2000, los faros ojo de angel los compre hace un tiempo con ustedes pero recien me regalaron un KIT Xenon y no se como instalarlo porque los dos focos H1 de los faros estan unidos al mismo cable que va al carro
would love to install my headlights orderd a set of HID Xenon + 06-11 Honda Civic CCFL Angel Eye Halo Projector Headlights - Black but have been waitting 2 weeks now and they havent even shiped them are you guys a part of pro tuning labs?
Yes you can. just not recommended.
What do you mean by fully seeded?
im having a hard time to calibrate my fog lights, as the comment from "raheelk23" its very hard to fix the headlights direction. Any ideas ? because i tried to do it and the high beam mirror dismounted. Can you guys help me, im from venezuela. im about to put back the original headlights. another question, can i put HID's on both high and low beams ?
where can I get the projector headlights for civic 2009 4d?
Emilio Gallegos Thank you for your interest in our products. You can check out www.k2motor.com for all our headlights.
Sorry we do not have an affiliation with Pro Tuning Labs.