То есть это "игрушечное" оружие с гильзами и поджигом горючего вещества для выстрела? Поздравляю, ты буквально создал огнестрельное оружие. Настоящее огнестрельное оружие. Запрещенное по закону. Надеюсь тебя не забанят и не посадят в тюрьму, было бы обидно Успехов в дальнейших разработках и не повторяй такую ошибку больше никогда
I love that the barrel is aligned with the bottom of the cylinder, which is a real trick used on high caliber revolvers to improve recoil handling, since the gun gets pushed more directly over the center mass and into your hand, rather than twisting up. Even for something as simple as this, as some people called it, "toy" with barely any punch to it, bro went with engineering thoughtful design.
I think thats actually kinda a design fault. This is a gun without a lot of recoil so using a bottom barrel doesn't make sense , and keep in mind bottom barrel revolvers aren't objectively better. First and most importantly, the inner mechanics need to be much more complicated when using a bottom firing revolver . Lots more moving parts. More points of potential failure. For something like this, printed out of 3d printed plastic which is more prone to jamming or getting caught, that's a serious concern. Also, while this prolly doesnt matter here, height over bore - the sights on a bottom barrel revolver will always have a more strict zeroing distance.
@@joemogley they aren't more complicated in this case as it's electrically ignited. The only real flaw, imo, is that trigger is relying on a bolt to make contact with 2 wires inside of the frame. Better solution would be to use a contact switch.
I don't think the faults are a concern as he lights it with a switch, sights however is a great point but also the bulky design might encourage people printing this with no gun knownledge to grip the front and burning their hand/forearm on the cylinder gasses
Kinda feel like he shouldn’t considering those rounds are as long as my forearm, lugging around a speed loading cylinder would probably slow down the reload.
@@bsod4144 Hydrogen has a very easy time escaping from almost any container. It can probably find its way straight through that plastic, nevermind the big gaps. If these casings are filled with hydrogen and then left for a few minutes in the cylinder, they'll probably lose a decent percentage of the charge. If you left them overnight, they might not even work the next day.
Looking at the video frame-by-frame, the riffling seems to be working. The bullets are flying straight and not tumbling until they hit. I'm impressed. I'm impressed. This might not take down a target, but it does shoot. Not bad for a little plastic and electricized water.
I love the design of this, feels like a sci-fi interpretation of a Smith & Wesson designed to go through anything its pointed at. Edit: Got the name of the company wrong.
With a large "heavy" projectile a higher twist rate on the barrel may be more preferable. The higher rotation speed may help stabilize the projectile. In addition there may be some benefit to adding some indented rings on the rear of the projectile as well. Very cool toy youve made. 😊
you could make sabot rounds for this and it would probably be a lot more dangerous. You could have a 10mm steel ball bearing be the projectile and a plastic shell around it that will fly away.
It's also not a great idea. Have done it accidentally with a paintball marker. Not only does it hurt so bad, the bones in your hand are quite delicate. Ever wearing gloves it's really unpleasant and possibly damaging.
@@comradeeraenvoid He used a mixture of H2 and O2 from electrolysis of water. Ideally the ratio should be 2:1. If less O2 is used, the 'explosion' is less efficient.
1 suggestion: I know nothing about revolvers, but wouldn't it be slightly better to have the cylinder revolve *after* the shot? That way there's less delay between trigger pull and firing.
Yes but it’s much more complicated to do. Thats why real double action revolvers spin the cylinder before firing. Single action revolvers are similar. Both spin the cylinder when the hammer is drawn back. This design doesn’t have a hammer and is electronically fired. I’ve spent dozens of hours working on this problem and making it function the other way is extremely difficult.
This thing isn't even a toy or anything anymore, This is just straight up a weapon. Imagine having a nerf war and one of the kids pulls up with this thing.
25mm is large enough to use sabot rounds, making it incredibly effective against armor (if this was designed as a firearm and not a toy). Imagining like a Space Marine with this as they tear through 'nids or 'crons. Beautiful design
I'm not a fan of the sound of 3d printed objects rubbing against eachother, that... FUZZY sound is so weird and uncomfortable, but the revolver looks amazing. Also the sound of those empty shells falling down, they sounded so much like shotgun shells, it's an actual ear worm.
![Stromae, Pomme - “Ma Meilleure Ennemie” (from Arcane Season 2) [Official Visualizer]](http://i.ytimg.com/vi/1F3OGIFnW1k/mqdefault.jpg)
Files on Patreon! : www.patreon.com/Flasutie
Do russian roulette with this
Will I be able to find instructions and models from your videos in Patreon? @Flasutie
please note, it looks more like a grenade launcher! this is very cool!
Id assume you too are single and have far too much time on your hands lol
То есть это "игрушечное" оружие с гильзами и поджигом горючего вещества для выстрела?
Поздравляю, ты буквально создал огнестрельное оружие. Настоящее огнестрельное оружие. Запрещенное по закону. Надеюсь тебя не забанят и не посадят в тюрьму, было бы обидно
Успехов в дальнейших разработках и не повторяй такую ошибку больше никогда
The shell drop after you ejected all the cartridges was the stuff dreams are made of
The sound of the casing dropping were on par with the ping
8:12
God imagine metal ....
Music to my ears
For some reason it sounds similar to a used 12 gauge shell bouncing on the ground but still...it sounds delicious
I love the sound it makes even with no ammunition, the friction of the plastic and the echoing of the electrical arc is very sci-fi
Man's out here on his way to make an astartes bolter
*T H E E M P E R O R P R O T E C T S*
Greetings! It's 25mm, so it's more like a heavy bolter.🤓
More Like an Revolver Bolter, but still cool.
FOR THE EMPEROR!!!
Well, now that you mention it…. Yes, he should make a bolter.
Just as the God Emperor intended
I love that the barrel is aligned with the bottom of the cylinder, which is a real trick used on high caliber revolvers to improve recoil handling, since the gun gets pushed more directly over the center mass and into your hand, rather than twisting up.
Even for something as simple as this, as some people called it, "toy" with barely any punch to it, bro went with engineering thoughtful design.
I think thats actually kinda a design fault. This is a gun without a lot of recoil so using a bottom barrel doesn't make sense , and keep in mind bottom barrel revolvers aren't objectively better.
First and most importantly, the inner mechanics need to be much more complicated when using a bottom firing revolver . Lots more moving parts. More points of potential failure. For something like this, printed out of 3d printed plastic which is more prone to jamming or getting caught, that's a serious concern.
Also, while this prolly doesnt matter here, height over bore - the sights on a bottom barrel revolver will always have a more strict zeroing distance.
nimko spaghetti
@@joemogley they aren't more complicated in this case as it's electrically ignited.
The only real flaw, imo, is that trigger is relying on a bolt to make contact with 2 wires inside of the frame. Better solution would be to use a contact switch.
I don't think the faults are a concern as he lights it with a switch, sights however is a great point but also the bulky design might encourage people printing this with no gun knownledge to grip the front and burning their hand/forearm on the cylinder gasses
I think the Mateba Unica is one of the guns that does that.
We'll need to keep this in mind for when MANKIND IS DEAD, BLOOD IS FUEL, AND HELL IS FULL
This seems like a rather inefficient weapon to carry for V1
@@AlkaProto how
@@Petroleum-x5h big
@@AlkaProto bro what???? you do realise that v1 casually dual wields nailguns (which are huge) while flying around at breakneck speeds
@@Petroleum-x5h mehhhhhhhh
Gunner's revolver from Deep Rock Galactic. Rock and Stone!
DID I HEAR ROCK AND STONE?
@@gabrielneves6602 Rock and Stone to the bone!
Karl approves
ROCK AND STONE!
it aint a gun unless it ways at least one hundred pounds
25mm cannon always sounds bigger than one inch gun
Haha
Still think the metric system is clearer to most than gauges and bores at least :)
Umm, isn't 25mm the same as a 1 incher?
"Meh, its only a 1 caliber"
@@AlyssMa7rintechnically, not really
@@DragonJohn 100 caliber, 1 caliber would be 1/100th of an inch.
Hellboy's Good Samaritan got one Hell of an upgrade.
Beat me too it. 😂
I was thinking he probably wants his gun back...
I was thinking the same thing
I’d just settle for the replica to have. Live it.
You just summoned the communities of Hellboy, ULTRKILL, and deep rock galactic
Don't forget Warhammer 40K!
This guy just has a 3D printer, electrolysed water, and a dream
imagine what he could do with a resin printer
My brain is a simple machine, I see a comically large revolver and click.
Exactly
It is not comically large, its the way it should be, but there is no one brave enough to make it.
Women Say we want disgusting things I wanted to see a giant revolver being made
>machine
@@cactusgamingyt9960 this comment made me hear a coin being flipped
*calming jazz plays in the background as Flasutie makes a 25mm Revolver Hand-Cannon*
exactly what i thought 😂
Make a speedloader so you can load the cylinders all at once
Kinda feel like he shouldn’t considering those rounds are as long as my forearm, lugging around a speed loading cylinder would probably slow down the reload.
Just change the whole cylinder
@@wire3989 You do realize carrying around a whole cylinder would both make the revolver more complex and worse to carry right?
I think think its fine how it is, after all Revolver Ocelot once said ruclips.net/video/Lj7UfgWYHiY/видео.htmlsi=zkwl-vAS3nkxivNe&t=10
I have a picture of a ghost on a tv.
UNDERTHEMAYO HAVING A FIELD DAY WITH THIS ONE 🔥🔥🔥
coin
coin
We be hating on good games while meatriding Doom Eternal with this one!!!!!🔥🔥🔥🔥
When ultrakill into the fire starts playing:
What's ultrakill
@@michaelmackenziemathews Doom, but three times as fast and your a robot
Hello V2
@@Xormage Ultrakill in a nutshell
@@V1_Ultrakill_890 Dude, you still didn’t give back my arm.
Texas Red: "I've killed 20 men, what makes you think you're different?"
The Arizona ranger:
this comment is so severely underrated
@@zensan453 thank you
big iron on his hiip! 🎶
@@Klezzrbig cannon at this point
*Unholsters THE BIGGEST IRON*
Everyone is just talking about ideas, admiring it, and all i see is ULTRAKILL Revolver
YES
It's pretty chunky for Ultrakill...
Оооо да
0.5m coins:
Was waiting for someone to say that
That slug spinning like that means your rifling actually works, holy shit lol.
Search "bullet spinning on ice" and you'll see what I mean.
@@thetengu431im gonna kiss you
@@FirstnameLastname-qy9gxwhat the hell?
@@Moo2loosCavern you jealous or something?
@@thetengu431 *OF COURSE I AM!*
8:03 cool! that shows the rifling works
so THAT’S a where the funky gopro robots got it
2 nikkon robots
-That's a M8 flare revolver with 37x94 Hotchkiss shell
don't fit bud.
-HAHAHAHAHHAHA
YOU WISH YOU WERE RIGHT
POCKET MORTAR
😂 yeah, this is how it starts, and ends with a grenade machine gun
Don't threaten me with a good time
Ah, /k/. Saw someone make a crossbow that fires .50 BMG rounds on there the other day.
@@XtoxinlolinecronomiconAnd those actually exist lol
Because of the scale you are working at, a replica 40mm grenade launcher, like the China lake, might be a fun project.
You mean one that is modification of sniper rifle?
BTW, US have manufactured a few of AWP with 25 mm caliber for smart granades.
@@ВерныйСоюзник no, I mean a 40mm grenade launcher like the China Lake. Also nobody adds a grenade launcher to a sniper rifle.
@@ВерныйСоюзникno, the China Lake is a pump action 40mm launcher.
I’m a massive gun nerd and I am both impressed, intimidated and jealous, that’s incredible
Are you a massive gun nerd, or a nerd for massive guns
@@gangstablook5846 yes
Shawdy made the whole ahh ultrakill piercer revolver
now he needs to bounce the bullet off a coin and see what happens
MANKIND IS DEAD. BLOOD IS FUEL. HELL IS FULL.
Literally the ULTRAKILL revolver
This gentleman crafted its own marksman, we gotta respect that
@@ripic100 Indeed
The ULTRAKILL revolver actually fires tiny slivers of metal.
@@budgetcommander4849He’a just referring to the visual similarities but yeah. You’re right on that
a little larger in size
I woner how much of the hydrogen escapes from the casing before firing
It isn't pressurized so probably not that much.
very minimal maybe 1% of power if that...hydrogen rises so its essentially trapped
@@bsod4144 Hydrogen has a very easy time escaping from almost any container. It can probably find its way straight through that plastic, nevermind the big gaps. If these casings are filled with hydrogen and then left for a few minutes in the cylinder, they'll probably lose a decent percentage of the charge. If you left them overnight, they might not even work the next day.
under pressure that is@@delphicdescant
@@delphicdescant I think if he use gun powder it's going to be more reliable
Hear me out:
25 mm revolver, with the American 25 mm APFSDS cartridge from the Bradley
Man portable armor piercing bolt pistol
uu thats a good one maybe even make necked down cartrige aswell
@@webelosevilos”I ain’t asking, cuh. Now show me them pocke-“
Recoil: yes
Actual bolter pistol
"I don't want to hear it, McBain. That, that cannon of yours is against regulations! In this department, we go by the book."
BAM
"Bye, book."
Our hero loads his revolver with great stealth. (SQUEAK) (SQUEAK) (SQUEAK)
The Badguys: "Hey who's reloading over there!?"
Not so much about stealth as it is ease of production.
@@SueDonym-qx7or I'm just teasing, it's actually a very cool project.
"Damn rats!"
"Not me!"
This is something straight out of Fallout
I'm p sure this looks a lot like the 10mm pistol, except it's 25mm and a revolver
Facts
Fr
Kinda reminds me of the 14mm pistol
.223 revolver + 14.7 pistol
On one hand you made it onto the ATF’s watchlist, on the other hand you made it onto the God Emperors favorite sons watchlist as well. Well done.
The ATF watch list is the favourite sons of the God emperor list
@@kriegen632"kid, you _are_ the watch list."
@@justafan9206i thought... _I_ was the watch list... 🥺
@@Voidi-Voidwe're all the the watchlist
I wish i was on the god emperors favorite son list
The fact that this is all 3dprinted is insane
I don’t think the metal components the springs are. Still very impressive.
House Goliath will take a whole case
1mm short of basically being the Gunner from Deep Rock Galactic's revolver.
ROCK AND STOVE BROTHA
You're giving the military guys ideas.
Looking at the video frame-by-frame, the riffling seems to be working. The bullets are flying straight and not tumbling until they hit. I'm impressed. I'm impressed. This might not take down a target, but it does shoot. Not bad for a little plastic and electricized water.
Good sir was so impressed he said it twice
I love the design of this, feels like a sci-fi interpretation of a Smith & Wesson designed to go through anything its pointed at.
Edit: Got the name of the company wrong.
it reminds me alot of the ultrakill stock piercer
Smith and Western sounds very futuristic to me...
Smith & Wesson
@@notnurfcreanga🤢
An old boss put two coworkers next to each other because they had those names. Best work joke after the rest of upper management.
Ultrakill reference question mark
Slab piercer moment
Nah, more like Warhammer 40k reference
does look similar
swiggity swooty
I was scrolling through the comments specifically to find someone who saw it as the ULTRAKILL revolver, all that’s left are the coins
My man here just casually recreating Helldivers 2 weapons IRL
The most cursed thing about this is the barrel is underneath. Great work I love it.
There are actual revolvers like that, though.
🎶Oh, he might have went on living but he made one fatal slip
When he tried to match Flasutie with the print'd gun on his hip 🎶
🎶print'd gun on his hip, print'd gun on his hip🎶
this guy gives robbers a smith and lesson the way he can just launch cannons and stuff
Max0r Reference?1!?!1/1!?!
My man just created the ULTRAKILL revolver
Me when "MANKIND IS DEAD, BLOOD IS FUEL, HELL IS FULL":
I would say this is the big iron but i think that "big plastic" fits better
It looks like something HellBoy or a Astartes would use, I love it!
V1 would like to have a talk with you.
EXACTLY the first thing that came to mind is The percier from ultrakill
Sameeee lololol
Revolver but THICC
This is no longer just a revolver.
This is a hand-held 4 gauge slug/grenade launcher
Still a revolver. We already have a 40mm revolver in the form of the M32.
That's a really well tuned printer, those tolerances are insane
Bro pulled out the Ultrakill revolver no way
Wait, you know what the design of this reminds me of? ULTRAKILL!
C O I N
*insert ultakill war without reason (7-4 theme) here*@@DumpsterFire3d
Machine turn back now!
I'm both very interested and a bit terrified if you ever start messing with pressurized HHO
DON'T GIVE THEM IDEAS LOL
He did do a grenade video so😅
Hmmm. A 3D printed double screw compressor. I like that idea.
8:01 this show that the rifled barrel does its work because we can see the bullet spinning
yup same as what happens when 9mm hits ice and spins
I must get my hands on this comically large ULTRAKILL revolver
Cool, but does it come with coins?
oh god
theres a ton of room for a telescopic/folding stock and maybe a foregrip mount, pretty cool!
With a large "heavy" projectile a higher twist rate on the barrel may be more preferable. The higher rotation speed may help stabilize the projectile. In addition there may be some benefit to adding some indented rings on the rear of the projectile as well. Very cool toy youve made. 😊
My man built a Goliath Stub Cannon, mad respect
This is both super cool and super genius
My man made the ULTRAKILL slab revolver.
Life goals
Total amateur suggestion, but you might consider tapering the casings ever so slightly to aid extraction.
you could make sabot rounds for this and it would probably be a lot more dangerous. You could have a 10mm steel ball bearing be the projectile and a plastic shell around it that will fly away.
Can you test out your theory on that spiffy ol' show of yours? Best gore in the world.
Dude, this thing is a toy. Why would he make it more dangerous?
@@somepunkinthecomments471Because it would be cool.
You really want em to make the m3 Bradley’s 25mm bushmaster don’t you?
@@cmmpr111 If you think hurting people is cool, you need to reevaluate your life.
2:16 from this part on this is just straight away "how to build a gun", i love it
Now THIS is a handcannon
Hearing those shells drop was pure euphoria 😩
cool projects man, keep it up!
I appreciate you using yourself as a human subject to show its effectiveness, that takes real commitment
It's also not a great idea. Have done it accidentally with a paintball marker. Not only does it hurt so bad, the bones in your hand are quite delicate. Ever wearing gloves it's really unpleasant and possibly damaging.
“25 mm revolver”
I’m sorry, *WHAT*
I know there's nothing wrong with this, but something about it just feels illegal
the high voltage ignition seems like the illegal part
The US have created that feeling.
Mans just made a BOLT-Revolver
this revolver look kinda like the piercer from ultrakill
Ya
The fact 25mm and lower ones in this toygun has enought power for an toygun fight to make their enemies finally freakin' call their hits is epic
even your screwdriver is 3D printed. I love your work
bro made the ultrakill revolver
O2 is heavier than air. It is not possible to retain the ratio when you do 0:52.
Didn't he use H2 tho? H2 is lighter
@@comradeeraenvoid He used a mixture of H2 and O2 from electrolysis of water. Ideally the ratio should be 2:1. If less O2 is used, the 'explosion' is less efficient.
ULTRAKILL REFERENCE!??!?!?!
Great!
Now make it generate coins that you can toss in the air and shoot for a cool and funny surprise!
We playing russian roulette with this one🗣️🔥🔥
Russian roulette is gonna be wild with this one
It's like a giant Mateba, how beautiful
1 suggestion: I know nothing about revolvers, but wouldn't it be slightly better to have the cylinder revolve *after* the shot? That way there's less delay between trigger pull and firing.
Yes but it’s much more complicated to do. Thats why real double action revolvers spin the cylinder before firing. Single action revolvers are similar. Both spin the cylinder when the hammer is drawn back.
This design doesn’t have a hammer and is electronically fired. I’ve spent dozens of hours working on this problem and making it function the other way is extremely difficult.
Bro really said :
Mankind is dead
Blood is fuel
Hell is full
I’d love to see the cosplays that use something similar to thos
Oh cool, can you load it with your older projectiles that you made?
Bolt gun soon ?
Okey but can you shoot a coin in the air with it?
"You can't be that comically large and expect to be effective in combat" said the gunsmith.
*"KAPOW"* said the 25mm revolver. *"KABOOM"*
1:34 consider that railguns are so stupidly fast that this happens to a metal projectile, and the heat then welds it to the barrel
Well, time to order one and dive into hell in search of blood… wait this isn’t the ultrakill revolver? Ohhhhhhhhhhhh
thats a godammn Ultrakill piercer revolver 😭🙏
I've been lookking for this comment
@@BrekekeReal Hello fellow Ultrakill fan 🤑
"HUMANITY IS GONE"
"BLOOD IS FUEL"
type gun
HELL IS FULL
This is the absolute epitome of “first rule of gun safety is have fun.”
is that the revolver from ultrakill
Yeah this looks like the average .22 pistol in Fallout 4
Real, they really are bulky especially in 4 for no reason
Cool as hell, but perhaps your enemies won’t be as intimidated once they find out reloading sounds like a squeaky toy XD
This thing isn't even a toy or anything anymore, This is just straight up a weapon. Imagine having a nerf war and one of the kids pulls up with this thing.
25mm is large enough to use sabot rounds, making it incredibly effective against armor (if this was designed as a firearm and not a toy). Imagining like a Space Marine with this as they tear through 'nids or 'crons. Beautiful design
I'm not a fan of the sound of 3d printed objects rubbing against eachother, that... FUZZY sound is so weird and uncomfortable, but the revolver looks amazing.
Also the sound of those empty shells falling down, they sounded so much like shotgun shells, it's an actual ear worm.