Keisuke Takahashi's Initial D FD3S Mazda RX-7 Model Car Full Build Step By Step (ASMR)
HTML-код
- Опубликовано: 12 июл 2024
- Initial D Mazda RX7 FD3S 1/24 Scale Model Kit: amzn.to/3bJX333
A Pre-painted kit is available from Aoshima (Highly recommend it if you don't like painting):amzn.to/3bIuyTl
Hello guys, in this video I will be building Keisuke's FD3S from the Initial D Anime seires. This 1/24 scale model kit is made by Aoshima, but I believe FUJIMI has also produced the same car, since I have already built Ryosuke's FC3S a while ago(from FUJIMI), I'd figure that I will give Aoshima a try. This is a curbside kit which means there is no engine but it still has a lot of good details. I had a lot of fun building this one and I will recommend it to anyone who loves Initial D. Anyway, please enjoy the build video and feel free to subscribe for more contents.
My other videos-
1/24 model car full builds - • 1/24 Scale Model Car F...
---All the tools I use to build my model kits are listed here:
Model Building Basic Tool Set: amzn.to/2ElHtMh
Panel Line Scriber:
Tamiya Plastic Scriber II: amzn.to/34cDrRu
Trumpeter Panel Line Engraver: amzn.to/2TFD1MX
Cordless Cutting Tool: amzn.to/3gh3Y2d
Glues:
BSI Super Gold+ Glue: amzn.to/31aNVPb
Tamiya Extra Thin Cement: amzn.to/2SbDC8A
Elmer’s Clear Glue: amzn.to/3jfoEKD
Sand paper:
600 - 3000 Grit Sand Paper: amzn.to/32aryZJ
Tamiya Sanding Sponge Set: amzn.to/2XIKzAJ
Micro MESH Soft Touch Sanding Pads: amzn.to/33eik0h
Painting:
Airbrush Kits with Compressor: amzn.to/325JHb8
Dual Action Airbrush: amzn.to/34brtrn
Indoor Spray Booth with LED Lights: amzn.to/2FwxnZE
Tamiya Painting Stand: amzn.to/2Q7h8UX
Airbrush Cleaning Station: amzn.to/329T8WL
Paint Brushes for Hand Paint: amzn.to/3aGwPvU
Tamiya Acrylic Paint Retarder: amzn.to/33hrkln
Paint/Fluid Droppers: amzn.to/32aizHZ
Alligator Clips: amzn.to/3kWm2T0
Paint Mixing Jars: amzn.to/3g855RP
Primer:
Tamiya Grey Primer for Airbrush: amzn.to/30okush
Tamiya White Primer for Airbrush: amzn.to/3cLdxXb
Spray Can Grey Primer: amzn.to/2GgnKPF
Spray Can White Primer: amzn.to/2ScNRJB
Thinner:
MR Hobby Lacquer Thinner: amzn.to/3n5dFpa
Tamiya Acrylic Thinner: amzn.to/34ens3T
Tamiya Enamel Thinner: amzn.to/392nv6P
Clear Coat Spray Can Paint:
Tamiya TS-13 Gloss Clear: amzn.to/2SeIbi4
Masking Tapes:
Tamiya 6mm Masking Tape: amzn.to/348XezD
Tamiya 10mm Masking Tape: amzn.to/3ibshj7
Tamiya 18mm Masking Tape: amzn.to/3igOXOU
Tamiya Masking Tape for Curves(2mm): amzn.to/36mfSXo
Chrome Paint:
Spaz Stix Mirror Chrome Paint: amzn.to/3iSgib9
Molotow Chrome Paint Pen 1mm: amzn.to/3gbNjNC
Other goodies I use:
TAMIYA Polishing Compound Fine and Finish: amzn.to/2G1X1q1
Tamiya Panel Line Accent Color Black: amzn.to/2EJlPSQ
Tamiya Mark Fit Strong Decal Solution: amzn.to/3n3D82w
Tamiya White Putty: amzn.to/33jY4dP
Tamiya Weathering Master(Oil Stain): amzn.to/36ksrCr
Duck Poster Putty: amzn.to/2Yix37r
Pentel 0.2mm Ultra Fine Mechanical Pencil for Panel Lining: amzn.to/3iTPLKw
Ranger Gunmetal Embossing Powder: amzn.to/2Q6AyJR
Hero Arts Embossing Powder(Red): amzn.to/30kfogI
Milliput Superfine 2-part Putty: amzn.to/2YgExrM
Air Blower and Duster: amzn.to/3igk7pZ
Mini Hand Saw: amzn.to/3mXY1Mt
Sharpie Red Fine Point: amzn.to/3ihius3
Sharpie Silver Metallic Fine Point: amzn.to/30hC8hu
My Camera Gear:
amzn.to/36krgDd
______________________________________________________
DISCLAIMER
Some of the above links are affiliate links, meaning, at no additional cost to you, I will earn a small commission if you click through and make a purchase, you are not obligated to do so, but it does help fund these videos in hopes of bringing value to you.
#InitialD #FD3S #Scalemodeling #plasticmodeling Авто/Мото
The carbon fiber technique was insane, man is a complete visionary 👏🏼
That RX-7 looks awesome in yellow. It's a really nice touch that they let you keep the headlights up or down.
Well done, Jun.
The most relaxing thing to watch ever..the craftmanship of a true legend
One time I fell asleep to one of his videos lol
Thank you so much for watching my video.🙏❤️😊
@@JunsMiniGarage Its a pleasure your handwork is outstanding , I one day want to attempt making one!
Yep
@@JunsMiniGarage _^;; v
"Woah, is he trying to fly with that thing?"
- Takumi after giving a look to the FD's wing
Is he a pilot
🥺ぴえん
@Potato LOL 😂😂😂
ikr right
@@user-qs4gk1jc9e くさ
So relaxing, this is what we call a Quality Content!
Thank you so much❤️🙏😊
wow the carbon recaro seats are very creative like it !
The carbon fiber technique is another level 🙇🏻♂️🙇🏻♂️👏🏼
Our comments have been answered!!! Thanks Jun for assembling the RX7😍
Impressive build. I would build the car as is, but you think "out of the box" and make things better like the seats. Wow!
Thank you for watching😊❤️
@@JunsMiniGarageالله كريمع
What an amazing car and show. Initial D will always stay in my heart. Now that Im mid 30s, I still remmeber the Initial D arcade games, seeing the RX7 geting upgrades and changed to the mazda Speed A spec kit to the final RE kit has been a journey. Love your work man!
This guy deserves like 2 mil subscribers
A master at work, the attention to detail is amazing.
Hey, didn’t you already build Ryosuke’s FC?
Wait, what’s that noise?
*redsuns theme playing in the distance*
Love the details!
This gives off asmr vibes while watching true craftsmanship.
I usually don’t like asmr but ur videos are an exception, keep up the good work jun can’t wait for your next video
Thank you so much😊❤️
Your videos are indeed so relaxing... Weirdly enough, they take away my headache that I have everyday for a few moments, thank you soo much 🙏
Finally the new part ❤️
As always, a great build. Glad you put the headlights up, gives it character :)
as a huge fan of initial D, you killed this honestly. the attention to detail is insane, well done.
I always wait for your videos . They are so helpful for making 1/24 model kits ㅋㅋ
This was as unexpected as the Inertia Drift
op
What's inertia drift?
Kansei dorifto
This is the best thing I have seen all day! Great workmanship! Absolutely flawless!!
Thank you so much for watching🙏😊
Great video!! I loved this videos, you are the best!!
Thank you so much for the support❤️😊
So well done and relaxing to watch. You're very skilled!
Amazing attention to detail, great job!!
Wow !!! 😍😍awesome !!! cool trick with carbon effect😮😮😮👍🏼👍🏼👍🏼👍🏼👍🏼
Thank you for watching❤️😊🙏
I've only watched 2 of your videos, and I have to say that your work is amazing, keep it up and you've got a new subscriber
Any plans to do build an NSX? It's my favorite JDM car!
Same! I would love an 1992 Acura NSX
same here. i adore the nsx
I like the NSX and plan to build it on the channel.😊
@@JunsMiniGarage omg thank you and i love you
Same too 😁
hello,im a fan of your builds. keep doing it you're wonderful!
Amazing work as always
Unreal. Just amazing to watch. Great work, man. Makes me want to get into this
The front hood the logo is on the hood not the grille
Wow, thats amazing. I need more Videos. You inspire me to begin this hobby. Great Job man!
Perfect! VEry cool Worked!
Currently dying on the toilet but loving those build
I love this type of video, full sounds, no music 😍😍😍😉👌
Thank you for watching😊❤️
Awesome work Bro! Gratulation!
Thank you for watching🙏😊❤️
エンブレムの位置直しましたね!
さらにかっこよくなりました!!
Great work, very nice!
Nice build!!! Great Work!!!
You're a wild man Haha I like this one! 🙏
Love your videos, excellent content, great effort and work, keep it up😍
Very nice walkthrough of the building process. Great video and resulting Keisuke's car.
Damn, I Wanted To Buy This.....And Coincidence You Make A Video About This 🤣
I dont know who can dislike this video
Awesome work
Looks sharp, nice job.
love FD3S forever!!!!
me and my dad watch ur channel , keep up the good work my guy!
Thank you guys for the support🙏😊❤️
Good work and Details is 😍😍
Thank you🙏❤️
Amazing ! Nice work!
Thank you so much🙏❤️😊
Another awesome build Jun.. 🤘🏻 #dioramalama.. 👍🏻
Soo satisfying
Keisuki!!!, This is super cool
Rx7 FD3S is the best^^
Nice and clean
Looks good! I just did an unboxing on this. Will be using the body for my micro drift RC!
Amazing job done. Bummer that only the AE86 has engine detail. Thanks for sharing, take care and keep up the good work.
yes and now the car thank you😍😍
Tofu chan
I have so many videos by this guy, I’m just binge watching All of his videos in random order, next is going to be the castrol supra!
Dream!! I just got to work so won’t be able to watch this till later, can’t wait tho, initial d 4 lyfe! 😁
Love that carbon fibre painting technique!
Amazing🙏
It looks kinda easy to build while watching but really hard when building, but it's so beautiful
THIS IS IDEAL.
Man you are so perfect at aoshima initial d rx7 fd3s
Great build and I love how you painted the carbon fiber on the seats. Great tip. Thank you for the wonderful video.
Nice video, just subbed!!!
master piece.........😱😱👍👍👍
I just love the way he cuts with beats
Hey! Nice video I love these so much. Can you consider doing Takumi’s 86?
Wow 😘👍 I love it
Thank you 💟
Me encanta tus videos
WOW, i want one🔥
This was very nice I don't know much about fd rx7 but doesn't it have on the rear red brake calipers
That carbon tho I must try lol! Great job 👌
Tako, I remember that day like it was yesterday.
It's cool 👍
its a really long process but its sooo much fun to add little details and such. im currently doing to AMT '95 Eclipse its very simple and alot of fun id reccomend it
bruh just discovered this channel and now I won't leave
やっぱFDはカッコいいね
amazing
Always loved the FD RX-7 with Mazdaspeed A-Spec kit in Gran Turismo :D
Stunning. That yellow.....mmmm
Thank you so much Spence.😊🙏❤️
Stunning as always!!! Subaru in the future?
Subaru is on the project list and will be built in the future for sure😊🙏
Very nice
Thank you 🙏❤️
Nice. Maybe nissan 180 sx s13 drift missile (this with pop up headlights) in next video?
My head actually play Initial D soundtracks when I watch your video😂😂
すごい!!
Sehr gut 😍🖤🤤💜
The attention to detail is something else. It would be interesting to see a muscle car or hot rod
Just watched the last episode of the first series 👍🏻👌🏻
すげー!ほしい!
カッコいい😁
what asmr girls watch: turtles eating melons
what asmr boys watch:
M1 Garand ping
Gun reload videos
Model car construction
Also toilet paper roll tactical reload videos
I appreciate the interior carpeting
So cool😶
I wish I was as patient as you then my models would be twice as good as they actually are
You're amazing
Very nice. 😲
Thank you for watching Wesley🙏❤️
@@JunsMiniGarage Yeah, KT's has a phases of his different body of RX7 FD, such as 2nd Stage, 3rd stage, 4th stage and final stage.