@@vasiliskaradimos Βασίλη όταν με το καλό τελειώσει όλο αυτό με την πανδημία και μπορέσω να παρω λίγες μέρες άδεια θα έρθω καλές δουλειές να έχεις και πάνω από όλα υγεια
Hi , great job. I have been using this clear since 1 year and it is good value for money. Do you use reducer as it say on the box or not? Actually how do you mix the clear coat and what gun do you use? Thanks
@@vasiliskaradimos Thanks.. i use W400 classic with WBX air cup. What pressure and how many turns i do set up your gun? Also how long after the last coat of clear you turn on on bake the spray booth? Thank you once again and sorry for the questions. Have a great night.
@@hristogeorgiev2024 No problem my friend... I have the fluid 3.5 turns out, fun 2 turns out and 2-2.5 bar... I don't bake the clear all the time... If I bake it I leave it 15 minutes to flash off and then bake it 20 minutes at 60 degrees... I am looking for the wbx air cup... What do you think about this air cup? Maybe it's better than lv2...
@@vasiliskaradimos It is designed for water borne paint , but many people use it for applying clear coat as me as well. I tried it a few times for solvent base and it is very good especially for silver.It has split nozzle as the ls and ws 400. Manly i use LS400 pininfarina 1.3 witch is one of the best base gun ( my opinion ).
@@vasiliskaradimos WBX is a bit slow air cup which is ok to me as i am not too fast painter. If you like faster air cups ,this one is not going to suit you i think. Better ws400 pininfarina clear hd 1.3 tip.
Where is the problem friend? If you see the fender is a blending panel so no paint on the badges.. Only clear... This car in my shop almost every week and it's perfect... No problem!
It's nice to see the master at work again, great job my friend
Thank you for your kind words friend... Good morning from Greece!
Μπραβο ρε φίλος πολύ καλο,πάντα τέτοια!!!
Σε ευχαριστώ Χρυσόστομε!
Excellent work !!!! 💯👌🏼
Thank you Dennis!
ΚΡΥΣΤΑΛΟ ΚΑΝΟΝΙΚΟ ΦΙΛΕ ΣΥΝΧΑΡΙΤΙΡΕΙΑ ΣΤΗΝ ΟΜΑΔΑ ΠΟΛΥ ΚΑΛΗ ΔΟΥΛΕΙΑ !!!!!
Ευχαριστώ πολύ για τα καλά σου λόγια φίλε Κώστα!
Пастаянна аптйок баслаке 40 40 пачему подскажите пожалуйста
Baslac 40-40 👍
Why are the reshotki on the right wall of the camera 5:03,5:36 ?
Resycle the air when I have heat to bake
Τό έκανες κουργιάλι.. που λέμε εδώ στην Κρήτη... μπράβο!!!!
Καλημέρα μάστορα... Σε ευχαριστώ πολύ!
Nothing wrong with baslac 40-40
I use it everyday.
Layed down nicely
Thank you for watching friend... 40-40 is a great clear!
👍
Μπράβο.φιλαρακι το έκανες κρύσταλλο. Χερετισμους από πατρα
Γειά σου μαγκιτη από την όμορφη Πάτρα... Σε ευχαριστώ πολύ... Χαιρετισμούς από Θεσσαλονίκη... Σε περιμένουμε όταν τελειώσουν τα lockdown....
@@vasiliskaradimos Βασίλη όταν με το καλό τελειώσει όλο αυτό με την πανδημία και μπορέσω να παρω λίγες μέρες άδεια θα έρθω καλές δουλειές να έχεις και πάνω από όλα υγεια
@@takosanton7296 Καλή δύναμη και πάντα υγεία και σε σένα φίλε Τάκη...
Круто
Hi , great job. I have been using this clear since 1 year and it is good value for money. Do you use reducer as it say on the box or not? Actually how do you mix the clear coat and what gun do you use? Thanks
Hello my friend... 5% reduser works good for me... At this job I have use the Iwata W400 Lv2 1.3.... Thanks for watching!
@@vasiliskaradimos Thanks.. i use W400 classic with WBX air cup. What pressure and how many turns i do set up your gun? Also how long after the last coat of clear you turn on on bake the spray booth? Thank you once again and sorry for the questions. Have a great night.
@@hristogeorgiev2024 No problem my friend... I have the fluid 3.5 turns out, fun 2 turns out and 2-2.5 bar... I don't bake the clear all the time... If I bake it I leave it 15 minutes to flash off and then bake it 20 minutes at 60 degrees... I am looking for the wbx air cup... What do you think about this air cup? Maybe it's better than lv2...
@@vasiliskaradimos It is designed for water borne paint , but many people use it for applying clear coat as me as well. I tried it a few times for solvent base and it is very good especially for silver.It has split nozzle as the ls and ws 400. Manly i use LS400 pininfarina 1.3 witch is one of the best base gun ( my opinion ).
@@vasiliskaradimos WBX is a bit slow air cup which is ok to me as i am not too fast painter. If you like faster air cups ,this one is not going to suit you i think. Better ws400 pininfarina clear hd 1.3 tip.
Y HAVE YOU THE BADGES ETC STILL ON A CAR LIKE THAT/
Where is the problem friend? If you see the fender is a blending panel so no paint on the badges.. Only clear... This car in my shop almost every week and it's perfect... No problem!
Bruh? He's in a fuking hoodie and pants badge is far from what's going on wrong here look at spray technique wtf is going on?
Wow
What is the pressure on the paint gun on clear coat??
2 bar. Thanks for watching!
Полировал после покраски?
??? Sorry friend... I don't understand your language... In English please...
@@vasiliskaradimos
I don't speak English.
Wtf am I looking at?
Wtf would you like to see?