Old School Gas welding hand fabricated repair panel Tips and Tricks #14
HTML-код
- Опубликовано: 29 сен 2024
- If you feel that you would like to help support Trev’s Blog channel please consider making a donation, money raised from donations will be used to buy tools and equipment to help produce new videos. Click on this PayPal to make a donation www.paypal.me/...
Buy a Trev''s blog planishing hammer and help support this channel!
Shop website: www.trevs-blog...
xtremeplasma.e...
Please feel free to contact me at auto-shaper@mail.com
Please visit my website autoshaper.com/
All bodywork for Race and Restoration enquiries please direct to Steve Gowing 01285 821887
Race and Restoration Instagram: Chicken Link!!!!
l.facebook.com...%...
RUclips channel Urchfab:
/ @urchfab
RUclips channel VW Rosstorations:
/ @vwrosstorations
RUclips channel Simon Ayton mini man:
/ @onomatopoeidia
RUclips channel Mark Bennet Bald creations: (glass fibre)
/ @baldcreations8044
RUclips channel The Gentlemans Motor racing team (mini)
/ @thegentlemensmotorrac...
RUclips channel Piper Doug mini toyota fusion and farmer:
/ @piperdoug428
RUclips channel Paul P Hydraulic suspension Mini:
/ @xpp.
RUclips channel Jademutley Triumph expert:
/ channel
RUclips channel Mini Man Shed (lovely bloke Martin)
/ @minimanshed8910
RUclips channel Mini TOM
/ @minitom7772
RUclips channel Sean C Mini interest
/ @bmcworkshop
If I've missed you out give me a nudge and i''ll add you to the list (sorry in advance)
Category
Cars & Vehicles
MUSIC
Intro 1975 by Josh Kirsch/Media right productions.
Outro Three kinds of suns by Norma Rockwell.
Ah thank you and good job. I have watched many of your posts and you often talk about repairing a "wing". Today I found out what a "wing" is.
Thanks Tom 👍
Attention to detail was fascinating. Finest work I’ve seen in a long time.
That fit is just amazing. Thanks for all your great videos and content!
! What a finish ! Wowwwwsa be proud of that
Nice. I only have a flux core welder and an oxy acetylene rig. Now I am confident that I can do some planned sheet metal projects - with tons of practice of course.
I’d definitely prefer to use TIG but there are a great deal of coach builders that only use Oxy acetylene. Many of them use it because the weld is softer and more workable. All of the hand built cars years ago were welded together using it. Cheers Trev 👍
@@trevsblog Would you leave out the filler rod with TIG also?
@@djpenton779 it depends how well you can get it fitting. To be honest I always use a tiny bit of .8 mig wire when I TIG weld. It’s so thin it melts and absorbs instantly. I like to use filler for aesthetic reasons as well as strength but it’s evident that many of the original coach builders didn’t use any as the undercut to the original construction welds is obvious. Cheers Trev 👍
Eres un autentico maestro .un crak
Really enjoyed this as it's what I remember. I used absolutely love gas welding. Really takes me back in time. Quite miss doing it.
Thank you!
God job👍👍👍👍
Fine work. I just got directed here after watching you do a TIG demonstration. Do you think you'd prefer TIG for this application now that you've become handy with it?
Rick Rose I don’t do enough welding to make a real balanced final judgment on this, both have their own characteristics. Some top coach builders will only use gas full stop, but is this because they don’t want to learn another technique, I really couldn’t answer that for you? My preference is currently is definitely for TIG. If you gas then things tend to end up more malleable but distortion is increased. I’ve never learned to gas aluminium properly so I cannot comment on those differences. Cheers Trev 👍
Trevor watch carter auto restyling.
Thanks Trev, great vid. You had me confused at the start of this vid as I am already subscribed to urchfab. Thanks for sharing the other channels!
Excellent. Most clowns today use MIG welders. No rod is a sign of a really competent beater. I once watched my late father join a whole door panel with only gas and no rod. It was wonderful. Hope this trade will never be lost. Would have liked to see how you put (i presume) the lead in before painting.
How to compress several hours down to 20 minutes, always the best Trev, you RULE!
Found your video while searching what would be good to use for oxyacetylene as a filling rod.
Unfortunately but fortunately with the defibrillator placed in my chest lots of electrical frequency is a no no. Thank you for the skill sharing . Just ordered a Smiths AW1. Can’t wait to play.
I am glad that you show how to do things correctly instead of being a "Bondo Billy"
Great work young Felah,glad to see old school oxy welding like i used to do,like you know there are always problems when you oxy weld,one being you need good access to the rear of the panel to fix the profile and its time consuming. I can still oxy weld and lead fill and its a pleasure to watch other people with the same skills,modern panel shops avoid these types of repairs because of time and the newer type cars haven't got thick panels to be able to oxy weld. Thanks
Love ya work Trev, I've kept my oxy set for the past 35 years and now I realise that I finally have a good use for it to restore an old car in the shed.
Genius. If you every come to a Southern California you have a place to stay just help me fix the roof on my Supercab Ford F-250. You are truly a Master.
I don't weld. But that was facinatating!!! I've not seen nor heard of that technique. I need a fender for my 95 YJ Jeep Wrangler.
so impressed with your work and your personality...wish I was your friend and lived in UK... really appreciate your work
Love it, great video again, if this is the old content republished, then let’s have those notifications!
My daily use on body rust repairs... oxy acetylene🙄😏😥,chain block and a manual boy aliagner. 😂
I wonder if my boss has a desire to level up our tools in our workshop. Like mig or tig, hydraulic body alaigners etc...
So much to learn from this one Trev, radius the corners, and no filler butt welding. Quality
You and matt are artist. The work you both do is beautiful. Much appreciated...
Very well done! With the advent of affordable MIG welders, few are aware of the old Skule oxy-fuel capabilities
which have been done for a hundred years +! The real beauty of gas welded seam , it leaves the seam extremely malleable (not weak) but so workable!
Great presentation!
Top work. Love that bead rolled edge tip...going to have to utilise that for a return lip in the near future me thinks...
Shout out much appreciated Trev...👍
Awesome video! Thank you. I'm so glad i'm not the only one that still acetylene welds. I guess i'm old school but that's what I learned.
Great stuff. Not a body work guy... spend my time on the mechanical side, but love the work. Maybe get a project started that I can mess with the bodywork. Really interesting.
What, no plug for Bad Obsession Motorsports and Project Binky? They also refer to us as "colonists".
G’day Trev, hadn’t realised that I’d not yet subscribed as I’d been watching your blog on the tv. Thanks for all you do, great stuff. All the best Pete
Dang! That came out perfect.
I like Urchfab as well as your videos, might have to see the others your promoting.
for some reason your links to Urchfab and the others come back as 'channel doesnt exist' but if you copy the channel name within the link then do a manual search the channel is there, just a heads up.
not sure if its my side or same for everyone clicking the links?
messylaura I’ll get this sorted, check back later. Cheers Trev 👍
hey Trev, looks like we watch the same videos. on another note,i was watching some guys back in the day working on old xk jags gas welding and using thin strips of steel as filler. the welding was top quality.
Thank you 😊
Oh crikey, how did I miss this video? Can't believe I haven't seen this one 🤷♂
Love your work mate 😎
Thanks Sean 👍
absolutely superb! thanks for sharing your professional work. I've learn a lot from your videos.
Great video trev. I also do gas welding it is an great skill to have. Easier to learn tig if you can gas weld.
Thank you for your video . Sir you are a master of your craft . Be well !
wow, magic.
Mad skills Trev.....Mad! Happy Trails my friend, Doug
Love the cross promotion Trev!! I found your site when Matt mentioned you a few months ago. I have learned so much from both of you. These old school techniques are dying so its awesome to see them passed on!
very enjoyable try number 1 nozzel it,s better
.trevor did you not show all the steps.
Just awesome to watch a skilled professional at work
Hey Trev, if you really want to see some car-fab magic, look up " PROJECT BINKY " . These two guys have created the unbelievable Mini. Incredible fab skills mixed with impeccable humor. You will end up going to the beginning and watching every episode.
Hi! I have a question, why does the torch sometimes pops when welding panels with filler wire? Thank you!
The oxygen acetylene mix is extremely volatile. Welding can cause pockets of unburned gas which then ignite with a pop. Another really common problem is having a leak where the nozzle screws into the torch, there is an O ring there. When you’re welding sparks fly up and ignite the gas at the nozzle leak, again causing a small explosion 💥
@@trevsblog thank you very much!
Thanks Trev. you're a legend.
Good job Trev. And yes I subscribe to his channel. He is very good. You need to build your self a car. I have restored one and it was well worth the time (2 1/2 yrs). Ronnie.
Thanks for all the great information Trev. The explanation of the finer techniques are left out by so many others. The flame adjustment tutorial and aiming of the flame when the weld is made were extra informative i helping me understand what you were doing there.
Have you ever checked out Fritzees Fabrication videos. It might make it easier to weld butt welds.
brdnsky64 sounds interesting how does he gas weld differently? Cheers Trev
@@trevsblog he don't gas weld. he uses a mig. I really enjoyed that and all your work. you are very talented. I have heard gas welding, but never seen it done. most of the time you will see brazing or tig, but I like the old school way. my uncle ran his own body shop and he had to braze every thing. this was before migs or tigs. thank you again. Ronnie.
Beautiful work.
This has given me some ideas about how to fix some of the body sections on my 78 Suburban 4x4. I will then need to do some work on a 66 Corvair Corsa 140 hard top.
Hi good afternoon, you don't use filler wire when welding? Just tack weld?
This was an example of traditional coach work welding with oxygen and acetylene. I would normally TIG weld it using filler wire 👍
@@trevsblog thank you! Have a nice day!
Point 0 nozzle tip would be much cuter to use on that... Love your Vides Master Sensei!
Recently been OA welding repairs on my 1928 wings and although I got there in the end (having watched this video many times for inspiration in the four years since I first commented) I still struggle to get a soft rounded flame like yours appears to be. My flame, although small, is pointed and quite aggressive and I have to be super quick to avoid holes and I think I'm making progress harder for myself than I need to. I'm using a #1 nozzle but can't seem to get away from the pointy flame. Any other tips (if you'll forgive the pun) greatly appreciated.
Hey Tim this can only be a torch or a gas problem. I’m 99.9% sure I used a #2 nozzle. Are you using pure acetylene or a mix? If you’re using a mix this will definitely affect the result. If you are using pure acetylene then I’d definitely consider trying out a different torch. 👍
@@trevsblog Thanks for coming back so soon. I'm using straight Acetylene (and Oxygen of course) I must admit that I don't really like the standard torches that amateurs like me tend to buy as it just too clumsy for the thin metal sheet bodywork that I do most often but there is not a huge amount of choice on the market and the nifty little Cobra (?) jobs seen in the USA aren't available here I think. Also, do you modify your nozzles to get them closer to a 90 degree bend? The slight bend on a standard nozzle means that you have to have your arm up in the air to get the flame angled down. Sorry for the long response.
@@timgreen6522 no I don’t modify the bend and yes your arm is cocked a bit too much. Why don’t you try some larger nozzles first, this would be the cheapest and easiest change you could try. If you think about it a larger diameter nozzle will work less hard to generate the same heat as a smaller one which may well generate a less ferocious flame as you can back off on the amount of gas you have coming out the end. Try a #2 first. Raise the acetylene until the flame starts to flicker lightly on the tips then introduce oxygen. If the flame is too hot turn the oxygen down slightly then bring the acetylene down to correct the flame if it’s still too hot repeat the process. I’ve actually welded using a #5. I’d personally start with a #2.
Thank you for that. I hadn't thought of it in those terms. I'll give it a go.@@trevsblog
Hey Trev that little skit where you say “Like a glove” is actually from the movie Ace Ventura starring Jim Carrey. Haha
Does this weld require any body filler?
Because of the undercut something would have to be used to fill it. Hand built cars of yesteryear would probably have been hand painted with coach enamel. Imperfections would probably have been incorporated into the painting stage.
HAHAHAHAHHA - "The intro Police" pmsl
How long did this take and how would that compare to the same repais if you used TIG? A video with identical parts repaired with TIG and Gas. perhaps left and right fenders, would be great to see.
Thanks!
Fantastic Vid & work, thanks Trev, and cheers from Melbourne Australia
never seen anyone do a sheet metal repair with a torch ...... plus no filler ! I am going to try that tomorrow and see if I like it better than MIG which leaves those weld lumps.
Great seeing the torch work, the stopping and planishing all makes sense now, I wondered why the old blokes used to do that!
Reminded me of welding class back in the late 70s in high school. I always preferred using the torch over stick welding. To be honest watching a 6012 electrode melt away can get really boring after about 10 minutes. Thanks for the video enjoyed it. Also trigger was my favorite.
I can't see how gas is better than TIG for this. TIG brazing might be less heat distortion ? ( never done it though )
Awesome job! Please, because I am not a native english speaker tell me again. Can I use it at vertical position as well? For example to a side panel of car if I have not the posibility to rotate the body. Thank's for the knoledge. Greetings from Greece.
Yes you can gas weld vertically 👍
@@trevsblog Thanks a lot!
Have you considered TIG welding?
@@trevsblog I spend some time with my inverter DC stick welder with a TIG torch. You know. Scratch start and some times sticking the electrode and the alignment of the panels goes away..... Also I have no garage room for my Alfetta GTV restoration project now! So I will try to weld outside..... and I wish to be a litle bit quicker than the rust.... :)
Darn good guitar!
Biuthyfull!..good work ...congratulations. From Panamá.
Great vid trev. Started following you recently so if you get the feeling someone is lurking behind you..its just me lol cheers
hi trev could you do this with a tig welder
Yes most definitely 👍
Fantastic!!!
Are you a cousin of Colin Furze? 😁
I wish 🤩
The weld was still slightly low ,did you use high build primer or a skim of body fill ?
The difference between this video and the second one in the list by “MY FRIEND PETE” is astounding. You treat this like an art, near perfect results, with no bondo. “MY FRIEND PETE” told me to make a flange, mig weld and cover with bondo. Results may look similar but this is obviously the proper method! I think I’ll buy tig instead!
Butt welding is certainly preferable to lap welding but both methods have their place. It’s all about experience, cost and how quickly you need to get things done. I’m very much trying to perfect the art of coach building and restoration and I’m also now not doing it to earn a living, so it now doesn’t matter to me how long something takes. Many people making videos have been caught in the trap of having to get things done in next to no time at all so they only learn one way of doing something and that’s what they show. Cheers Trev 👍
Great video!
Why gas welding and not TIG or MIG?
one thing i have noticed is how clean you make the metal before you work on it.
Awesome I follow some of them want to learn properly as did just small patch on car's but now want to do them better for the future thanks
that looks suspiciously like a shelving bracket that they used
Thanks for the video Trev, recently got a gas welder setup and am wanting to learn to use it!
You will enjoy it. Good luck.
Great stuff Trev
Thanks for sharing,
you're an old school gun!
Awesome! Really appreciate this video
Hi Trev , great style and content , I'm hooked ! . Have a good weekend . Mac .
Thank you for sharing the video.
Some filler on that wing doctor quiet the doc is at work good work again
Trev, just magical watching you work!
Great welding with no filler. Fabulous!
Hello Trev I have tried using your link to Gentlemans team and for some reason it says their page does not exist, sorry to be a negative could you look into this , .. Ill try searching him the old fashioned way, he he ... any who, I enjoy the videos you pump out and the side rock theme...
edward leathem I’ll get it sorted check back later. Cheers Trev 👍
Wow,great work learned a lot.How long would that repair process take just putting in patch panel and welding it? Just curious thanks for all the lesson ,just found your channel yesterday.jason
camaro19690 a couple of days to make a real nice job of it. Cheers Trev 👍
you sure its size 2 oxy tip
Tip size is manufacturer specific. #2 tip from brand A could be the size of #4 tip brand B.
Great workmanship... do you still use this welding or it's all TIG now?
I use mostly TIG to be honest, but I still find the welding torch invaluable. Cheers Trev 👍
The outro music married to those fantastic panels is bliss
Thank you.. That works
really well...
Very nice repair on older wing (fender).
Perfection. Great to see perfectionist at work.
Like your work, inspirational well done
how do i get to that music it is amazing. great vid
Compulsive watching this is!
Great craftsmanship brother.
Fantastic attention to detail!! Great work!
good work Trev, what gauge steel is that sheet?
Welding OCD it’s 0.9mm cheers Trev 👍
Cheers Trev great job on that wing. Whats the advantage using gas welding over Tig ?
groovedodger I’d actually prefer to do TIG but gas is slightly softer which is preferable as far as welding goes but I’d rather TIG any day, this was done mostly to show asa demonstration. Cheers Trev 👍