Hey there I installed this last night and all the lights work properly. However the bike cranks but doesn’t start. Is it possible I disconnected something around the area to maybe the fuel pump?
Any luck? I just did the install had the same issue, I’m gunna get some fuses from the store since I need some and check if any which is blown. Pretty sure I didn’t accidentally disconnect anything, but noticed my fuel pump wasn’t coming on after the install.
Hey bro, same thing was happening to me, fuel pump wasn’t priming. For some reason it’s starting now… I’ll check on the rollover sensor if it happens again
So in removal of the rear fender what replaces it? How do you keep the wires protected, seeing all wires were protected before? Is there a cover piece? So you removed a fender perfectly working all components, so now you have to purchase upgrades not including bracket, license plate light, directionals, and flasher?????
Technically, it's a free market so you don't *have* to do anything. We provide options and solutions for those riders who want to get rid of their OEM fender. We offer an undertail closeout to cover the holes left behind from OEM fender removal, different signal options for different looks, a universal license plate light, and a flasher relay for those looking to upgrade to LED turn signals with something different.
@@JessicaSimonson1976 not every LED turn signal is the same. Different technologies, capacitors, and resistors can draw different amounts of current and therefore may require a relay or for resistors to be wired in.
Also to add to my comment. Paid for the fastest shipping possible. (2 days). But took the company almost 4 days to even pack my order. Meanwhile I ordered an exhaust with free shipping from another company. And that is expected to get here before the TST product is. Both shipped by USPS. Definitely do not purchase fast shipping as it is a rip off as well as paying $200+ for nuts and bolts.
It's also important to note that you placed your order at 3:30pm on a Friday so naturally, the order wouldn't ship out until Monday as mentioned in our Terms and Conditions and during the checkout process. We also offer a 30-day return period if you'd like to return your nuts and bolts.
about $250 in total if anyone’s wondering. Overpriced but worth it if you don’t wanna go through hassle of looking for cheap alternatives. Just ordered mine.
Why could you guys not design this as one machined piece? Seems like to many little pieces? Then no hole for wiring to pass through? Just curious in this d*mn age CNC is a thing.
@@JessicaSimonson1976 we began this “bridge to production” program which allows us to release products quickly while having the “final” components injection molded or machined. To answer your question directly, machining is something we do for many closeouts and components but for this closeout, we would probably injection mold with ABS to have a color and texture matched components vs a brushed aluminum look that will cost more.
@@RyZe77890 Would you pay 4 times the price for a carton of milk, loaf of bread, your mobile phone, etc when the store next door has them for a quarter of the price? Seriously, would you? No you wouldn't! That doesn't make that person broke, it's money smart and would be the common sense things to do.
curious to see what else you guys have in store for this bike
Hey do you guys make front signal delete alternative? I don't like the front signal looks ugly
Great video! Very clear and good explanation.
Glad you enjoyed it!
TST
Dude we need integrated into the tail light so bad, the bike would look sick with clean cobra tail
this
Hey there I installed this last night and all the lights work properly. However the bike cranks but doesn’t start. Is it possible I disconnected something around the area to maybe the fuel pump?
It definitely sounds like something got disconnected or a fuse is blown.
Any luck? I just did the install had the same issue, I’m gunna get some fuses from the store since I need some and check if any which is blown. Pretty sure I didn’t accidentally disconnect anything, but noticed my fuel pump wasn’t coming on after the install.
I figured it out, I put the roll over sensor upside down it’s by the OBD2 port
Hey bro, same thing was happening to me, fuel pump wasn’t priming. For some reason it’s starting now… I’ll check on the rollover sensor if it happens again
This is why don't mess with factory wiring. Unless it is damaged.
Would this work with a Guatemalan license plate? 210mm X 120mm Please answer
So in removal of the rear fender what replaces it? How do you keep the wires protected, seeing all wires were protected before? Is there a cover piece? So you removed a fender perfectly working all components, so now you have to purchase upgrades not including bracket, license plate light, directionals, and flasher?????
Technically, it's a free market so you don't *have* to do anything. We provide options and solutions for those riders who want to get rid of their OEM fender. We offer an undertail closeout to cover the holes left behind from OEM fender removal, different signal options for different looks, a universal license plate light, and a flasher relay for those looking to upgrade to LED turn signals with something different.
@@TSTindustries how do you go from LED turn signals to LED turn signals, and have issue where requires a flasher upgrade?
@@JessicaSimonson1976 not every LED turn signal is the same. Different technologies, capacitors, and resistors can draw different amounts of current and therefore may require a relay or for resistors to be wired in.
The smoked windscreen is from tst industries? I dont see it in the website.
No, we don't make that part.
Are we going to see a tail light with integrated turn signals?
Will this work for the Nk450 also?
We have not had that bike in the shop to verify but we received reports from other people that they installed the kit successfully on the NK.
-BR
@@TSTindustries update: it does work with the 450NK. Make sure to add the LED flash adapter. Otherwise it was nearly 1 for 1.
What I was looking for👍🏼
Would this work on a cfmoto 300ss
Also to add to my comment. Paid for the fastest shipping possible. (2 days). But took the company almost 4 days to even pack my order. Meanwhile I ordered an exhaust with free shipping from another company. And that is expected to get here before the TST product is. Both shipped by USPS. Definitely do not purchase fast shipping as it is a rip off as well as paying $200+ for nuts and bolts.
It's also important to note that you placed your order at 3:30pm on a Friday so naturally, the order wouldn't ship out until Monday as mentioned in our Terms and Conditions and during the checkout process. We also offer a 30-day return period if you'd like to return your nuts and bolts.
Damn nothing else for the 450 ?
about $250 in total if anyone’s wondering. Overpriced but worth it if you don’t wanna go through hassle of looking for cheap alternatives. Just ordered mine.
I'm not buying every piece seperate, that's just bull crap....I'll look elsewhere, like mustard bikes or aliexpress.....
No problem, ride safe man and enjoy your ride!
Why could you guys not design this as one machined piece? Seems like to many little pieces? Then no hole for wiring to pass through? Just curious in this d*mn age CNC is a thing.
@@JessicaSimonson1976 we began this “bridge to production” program which allows us to release products quickly while having the “final” components injection molded or machined. To answer your question directly, machining is something we do for many closeouts and components but for this closeout, we would probably injection mold with ABS to have a color and texture matched components vs a brushed aluminum look that will cost more.
Way too overpriced
Why do you say that?
Agreed, what a rip off.
@@tangosucka2000 the beauty of a free market is that we’re not the only option out there.
Someone sounds broke
@@RyZe77890 Would you pay 4 times the price for a carton of milk, loaf of bread, your mobile phone, etc when the store next door has them for a quarter of the price? Seriously, would you? No you wouldn't! That doesn't make that person broke, it's money smart and would be the common sense things to do.