@@vanishingpoint808The short answer to that is: depends on the bolts. Although titanium offers a superior strength to weight ratio when compared to steel, titanium isn't necessarily stronger than steel. So unless you are very sure of the specs of the bolts you're taking out, I wouldn't risk it and just renew them as BBS requires. Be it steel or titanium, metal fatigue happens to any metal that's exposed to repeated stresses.
1:34 for situations like the broken bolt you may give a *manual* impact driver a try. Like KS Tools 515.1003 (it's just the first one I happened to google)
Would it be a good idea to clear coat the barrel? mine got restored a few years ago but it's been hard to maintain the rims, they are now black almost.
They were just normal wheels back in the days. You have no Idea for what germans used them 😅 My grandfather put his garden hose around it... Some used them as flower potts
Can you tell us what torque you used when re-installing the face bolts? I have a set of 2 piece AMG rims that will need to be refinished and the assembly torque is the only spec I am missing.
Look great 😁I have the same mag and i planned to restor it but i dont have a sunblast or rust gun remover and paint gun so this is possible to do it without all this with just some sandpaper,chimical product,good sray cane skills? I know that would be long but my friend told me a restoration like that is almost the price of the mag so do u have any tips to do it on a budjet ? 🤔
when I restored some badly worn aluminum wheels I only spent $140 on sandpaper, aluminum polish, and a polish applicator. It takes a boat load of time to do but its worth it in the savings you get compared to having a professional restore ur wheels
Kudos for the effort, they look awesome. Did this sort of project on a couple sets of rims, I would consider applying clear lacquer after mirror polishing the bead. It was a pain to maintain if kept raw.👍
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Bolts should constantly be renewed!!! That is a must for the company BBS!
Even with titanium bolts?
@@vanishingpoint808The short answer to that is: depends on the bolts. Although titanium offers a superior strength to weight ratio when compared to steel, titanium isn't necessarily stronger than steel. So unless you are very sure of the specs of the bolts you're taking out, I wouldn't risk it and just renew them as BBS requires. Be it steel or titanium, metal fatigue happens to any metal that's exposed to repeated stresses.
Sandblasting without gloves... You are sick madman. Beautiful job
Thats some janky ass sandblasting styles, love it haha.
It doesn't hurt too bad as long as the pressure isn't too high and you're not pointing directly at your hands xD
I just picked up a set of RS771 and I'm gonna get mine looking good here very soon.
Now THIS is a proper wheel restoration. Well done!
Thanks 🙏
...famous last words - 63 MORE! GREAT job!!!
1.Broken Bolt What tool did you try 2nd time?
2. Is it a 5mm hexagon tool? 2:40
Yes, something like that (don’t remember ?mm)
9/10 shops wouldn't even dissemble let alone clean up each bolt. Really thorough job and very refreshing to see 👌
Neither would I disassemble the rims. Chances are high, shearing these screws off. Those are made of Titanium.
Masking them and happy it is.
1500-2000k in a shop..
shops didt remove old balancer glues anymore people just go after green paper
A lot of hard work and looks good as new!
Thanks 🙏
I've always had BBS and MOMO close to my heart. Great job.
Thanks🙏
Thats some labour intensive job! well done.
Thanks 🙏
I think this is the sweet spot for the channel. I need more of this.
Gorgeous job. Would love to see how you deal with deeply scratched/scraped wheels.
Awesome job and nice video also! Congrats!
Thanks 🙏
1:34 for situations like the broken bolt you may give a *manual* impact driver a try.
Like KS Tools 515.1003 (it's just the first one I happened to google)
WOW!!!! they look brand new, amazing work
Really glad i found this video! I just bought a set for $100! Gonna restore them and install them on my FR-S!
Tell me please, how many Newtons per meter do you pull the bolts?
Usually 25-28nm
@@makukhawheels4674 thank you
The blasting part looks strangely satisfying
Beautiful result and excellent careful process. How many hours of sanding and polishing were involved?
Thanks! Around 1-2 hours for 1 lip
Incredible. Congrats!
Thanks!
Great work. I’m impressed I can’t lie.. Looks brand new! Awesome job :).
Would it be a good idea to clear coat the barrel? mine got restored a few years ago but it's been hard to maintain the rims, they are now black almost.
I may be crazy, but that was a very satisfying video to watch!
Awesome job you’ve done there 😎
Giving me some ideas on what todo on my modenas
A lot of effort but results are magnificant ! well done ! 10/10
Thanks 🙏
Wish there was a shop like yours close to me
It was satisfying to watch to finished product
🙏🙏🙏
Amazing job! I can't believe how people destroy quality BBS wheels like that :(
Thanks🙏
They were just normal wheels back in the days. You have no Idea for what germans used them 😅 My grandfather put his garden hose around it... Some used them as flower potts
They weren't "destroyed" the cerakote thats put on them from the factory is garbage.
Hard Work, but it was worth it!! Good Job!! ☺️👍🏻
Thanks 🙏
Good job!! What's about the bolts torque? Nm?
Thanks! Around 25-28
What color powder did you use? Looking to restore my rs910’s and I like the color you used.
This is ral7220 on faces
@@makukhawheels4674 what company? Prismatic?
No, its our local company
Awesome!!! Back to bling!
Thanks 🙏
They look awesome. How much does a job like this costs?
Around $250-300 locally
Nice works and alloys. Golf MKIV GTI, right?
Yes 👍🏻, 🙏
Thanks 🙏
spectacular transformation
Top job those wheels looks magnificent 👏👏👏👏😍😍😍😍
Космос просто , дуже крута робота, фінальний резльтат дуже стильний на якісний 🔥🔥🔥
Нереально крута робота👍
6:12 What is the blue stuff? Some type of lubricant? If yes: should one be using lubricant on bolts?
It'll be thread-lock mate
Well done lots of patience.
What did you use to polish the lips to get the chrome finish?
120-240-400-600-800 sandpaper, than 2 polishing paste
@@makukhawheels4674were the lips powder coated silver before you polished?
@ yes, whole barrel was powdered with lip
@ how did you polish them? Looking to do the same on my set👍🏼
@@NEV3RL8 sand it with 80 or 120 grit to bare metal. Than 240 400 600 grit. Than buff witb paste
Amazing restoration! Do you know the torque spec for the bolts mounting the face to the barrel?
Thanks 🙏 25-28nm
Came out Clean!
Thanks 🙏
Without sounding cliché, they actually look better than new!
Bro great work👍
Thanks 🙏
Can you tell us what torque you used when re-installing the face bolts? I have a set of 2 piece AMG rims that will need to be refinished and the assembly torque is the only spec I am missing.
Around 25-28 nm
Look great 😁I have the same mag and i planned to restor it but i dont have a sunblast or rust gun remover and paint gun so this is possible to do it without all this with just some sandpaper,chimical product,good sray cane skills? I know that would be long but my friend told me a restoration like that is almost the price of the mag so do u have any tips to do it on a budjet ? 🤔
when I restored some badly worn aluminum wheels I only spent $140 on sandpaper, aluminum polish, and a polish applicator. It takes a boat load of time to do but its worth it in the savings you get compared to having a professional restore ur wheels
You can do it yourself without any problems - but would be a long way))))
Great work. I’m impressed I can’t lie.
I hah a set done a couple yrs ago had centre done in bronze with black barrel and bolts the Audi logo on the caps was in black as well. Looked 👍👌👌
Interesting video. Was wondering if having a motorised turntable in sandblaster might save you time?
A bit, i guess)))
When an bolt is broken, we decide to weld an nut on it. Its the best and easiest way to replace it.
greetings, and nice video :)
Hadir nyimak boss ku suksesselalu 👍👍👍
BEAUTIFUL good work
Thank you 🙏
Good Job! 👍🏻😉
Thanks 🙏
Great job 👏 bravo!
Thanks 🙏
freaking amazing job
Kudos for the effort, they look awesome. Did this sort of project on a couple sets of rims, I would consider applying clear lacquer after mirror polishing the bead. It was a pain to maintain if kept raw.👍
What brand of gloves do You use when sandblasting? :-)
🤣🤣🤣
Awesome job
Perfect Job 😍
Soooooo goooooood❤
Where did you get new bolts? I broke 2 disassembling mine today
I’m selling used bolts if you need
@@makukhawheels4674 I would def be interested if the price makes sense.
@@makukhawheels4674willing to sell 2?
Super nice classic wheel
Thanks 🙏
Do you have a link to the tool you used to take the face of the wheel off
Hyper Professional. I would put new bolts instead of used ones, but seems fine after all. Excellent!
Thanks 🙏
If they are titanium,witch i believe they are it would be expensive
That after shot though!!!
Диски огонь получились - красавчик.
素晴らしい♫
できたら最後、車に装着されたのが見たかった。
Thanks 🙏
Superb job, did they need balancing before fitting?
Yes, sure!
Now thats art!
Nicely done! 👌🏻
amazing...what a job...what a set
Отличная работа. Приятно смотреть. Если не секрет чем полировали и после шлифовки каким зерном?
Спасибо! Поліровка в 2 пасти после 800 наждака
Lovely job. 👍👍
Hey! Great job! What's the paint code for the silver?
Ral 7220
What type of sand did you use for sandblast ??🙂
Local river sand
Good job! I like BBS wheels.
Are these forged? What’s the weight? I’m buying a rough set to refinish soon
Not forget I guess. Don’t know the weight 🤷🏻♂️
Looks so dope
Good work
Thanks!
So crazy! 🔥
From fugly to fabulous, beautiful work.
Thanks 🙏
Nice work
Thanks 🙏
Increíble trabajo saludos desde Veracruz mx
That looks so good! How are they holding up? I wonder if the bolts would start to rust, now that they have been stripped of everything.
I believe the bolts are stainless steel.
There actually titanium
Looks brand new! Awesome job :)
Thanks 🙏
Looks good..
Impressive! Good job!
Thanks 🙏
Good job 👏
Awesome job!!!!!
Verry Nice job👍 what is the machine called that spinns the wheel?
Amazing! Good job!
Thanks 🙏
Curious what torque spec you used on the face bolts?
28nm
@@makukhawheels4674 thank you
Good job .
What hardware do these use? Have a set and I’m trying to rebuild them myself
Original BBS titanium hardware
@@makukhawheels4674 you got any specs for them?
@@russellupwood i used around 25-27 nm
@@russellupwood i used around 25-27 nm
I still want these on my mini ❤
Superbe travail et résultat ! 👏
Now thats a nice bbs rim
Cool !!
Excelente 👌
🙏 thanks