So right. Why are the alignment shops like that? Could it be that they're just not good at their jobs? I took a vehicle for alignment to two shops and had to revisit both shops multiple times. The 2nd shop comes closest to completing the job and then I give up. I would love to be able to do this myself
Truth is that you can't find one. Just buy a 3 year alignment package and keep going back until they get it right. That's literally the only option if everything is chain owned.
One of those jobs you struggle with in the beginning but then once you learn it, makes you wonder why you were struggling at all. Great 90° angle tip for the inner tie rod adjustment.
What I would normally do is if the steering is off after an alignment say in between 12 and 1 position I would just put it opposite of where it was and re adjust, test-drive and would set back normal but I think it's re calibration the systems need!
some times it's the trust angle that's bad so when you align the front you center the wheel but when you drive it it's not centered because there's a problem in the rear
im taking my car back to the tyre shop after changing tyre, i got the same issue, straight wheels but steering wheel is off to the right. Hopefully they can fix it like this
Hello I need to straighten my steering wheel by adjusting the tie rods. Does the steering wheel need to be straight Before doing this or does it not matter? Thanks
Can't I just yank the steering wheel off and center it after I plug it back in? My car drives straight but the steering wheel in 2°off center clockwise.
Hi Greg. At which angle would you say you steering wheel was at? My steering wheel is at a 10.00 angle and pretty much all my warning lights have appeared, I put my vehicle through a diagnosis and it states "steering angle sensor mechanical fault" the mechanics are asking for a fortune to replace it. Do you think that if I do this it could fix it? Thanks. Ben
@@Bobthebuilderghedf it seems like it's the wrong question. I think these alignment guys are in cahoots. I just realigned my old Tacoma truck because of an incompetent alignment mechanic and I used a string from the rear wheel to the front wheel and I made the adjustment and I watched it as I was ajusting the tie rod and now my front end alignment is way better than after I paid my hard earned money to have a front end alignment technician do the job right.
My car is new but when it got aligned by someone they made the left steering stiff and it’s annoying when turning left vs right. What can be my problem? Doesnt pull.
So here's a question: I bought a classic car, and immediately changed the ball joints and tie rod ends. I then also had a professional alignment done in a shop before I first drove it. The car drives straight and doesn't feel off or twitchy as far I can tell, however I have to hold the wheel at 1 o'clock to go straight. When I turned the wheel from lock to lock I noticed that it rotated slightly farther to the left than to the right (From TDC on the steering wheel, where the tyres point slightly left as established). I then put the steering wheel on one tooth further to the right, it can now rotate exactly one and a half turns either side from TDC before hitting lock. But it now sits at about two o'clock when the tyres are pointed straight. My question is: Is that the right approach? Centre the steering wheel relative to the steering rack and then readjust the tie rod ends to suit? Or is it possible for a car to have asymmetrical lock from the factory if maybe the engineers had to compromise?
Theoretically, if everything is perfect, the rack would be centered with the tires (sorry, tyres!) pointing straight ahead and the tie rod threads being equally threaded in. There is no reason to intentionally have anything different. Due to manufacturing tolerances and life, this may not be exactly the case. You want to have the rack travel centered with the steering wheel level, and then adjust the tire rods to get your toe correct. Some vehicles have steering columns which are "keyed" and only allow the steering wheel to mate to the shaft in one position. Yours sounds like that is not the case so you can move it around. Any chance someone had the steering wheel off in the past? Could the rack or lower steering connection have been changed and the bottom connection did not get back in the same spot? Usually if there is something really bent, the alignment report will be affected, but not always. A bent steering arm can cause the tie rods to be threaded differently and yet not affect a standard camber/caster/toe alignment report. There will be issues with "toe out on turns" if you go deeper into the alignment machine screens as well as possible bump steer or other issues. (Newer cars obviously need at least a steering angle sensor reset and possibly more ADAS related resets which you don't need to worry about.) A note about centering the steering rack; the tie rod ends should be removed from the knuckles so the rack itself is controlling the full lock positions and not engaging any stops related to the knuckles.
@@SPCAlignment I rebuilt the suspension and the arms and subframes are fine. So i guess it was the previous owner who reassembled the steering column the wrong way, with the factory TDC mark way off. But thankfully the shaft isn't keyed. It's a splined shaft, and it's possible to centre the wheel between locks without taking out the whole steering column. After some digging in the workshop manual I also found where it says to do precisely that. There are no stops on the knuckles or anywhere except in the rack itself, but the idea with disconnecting the rod ends is a good point to remember for future projects. Thanks for the in depth answer!
Se asse di spinta non è zero non avrò mai un volante centrato? Facendo allineamento!! Complimenti x i video molto utili è professionali... Sono un gommista vorrei essere specializzato come i vostri tecnici👍
What if the steering wheel is off by a very small amount, like less than 1/4 inch? I'm not sure how many degrees, just a hair off? Any cause for concern? The truck drives straight and feels great on the road. This tiny discrepancy is barely noticeable but I do notice it and it kinda bothers me. I don't want to seem too picky and have eyes rolled if I go back to my mechanic.
So he's just marking the tie rod with a line so he makes sure he adjusts both the same distance. Got it. (unless there is adjustment being made) I'm going to go with the taping the wheel straight to column as I learned in a diff video and matching each front to its rear wheel w string method should get me close enough. thx
If an alignment machine consistently has an issue with the steering wheel being off in the same direction every time, then it MIGHT be a calibration issue. If the steering wheel is off one direction one time and the other direct the next, that is very rarely calibration but far more likely front turn plates which are not turning smoothly and easily. The turn plates should be taken apart, cleaned and any ball bearings replaced which are not smooth and round. This can make a world of difference. (As long as the front turn plates are being checked, also pull the rear slip plates apart and clean/inspect/replace those, too.)
Where you located. I have this problem alignment didn't help AND the mechanic continues to say alignment and says he doesn't know BUT I drive it many roads and speeds I'm not imagining. It so very slight but it's real and especially when I back up the wheel turns way too much and is never in a straight position even if the tires are. But the driving part is the worst it is so unnoticeable. Can you help thanks
Thanks for your interest but Specialty Products Company is a parts manufacturer. We do not repair vehicles. You may want to research some local repair shops to help you with your problem.
I am so desperate I have been trying to work on this for almost a year, no really a year. No one here seems to get it - I almost feel like engaging your services on a video call. My steering does not pull, if I let the steering wheel go it goes straight but the wheel tilts to the right by about 3 degrees. Since mine is right, do I flip over what you have done? (Taking into account the pre test of turning the tie end rod forward to know which is + and -)
If your toe is correct but the wheel is to the right of center it`s most likely the crown they put in roads to allow for water drainage when it rains To compensate for road crown they rotate both tie rods equally as seen in this video to straighten the wheel effected from the road pitch Basically adjust and road test and repeat as needed till the steering wheel is straight when driving
My steering wheel is of center to the right but car goes straight down the road. It has NOTHING to do with the crown in the roads for drainage. If it was... everybody's steering wheel would be off center going down the road
What's up with the 2.3L ecoboost in the Ranger? I'm needing to get a new truck and with 315K on the one I am replacing --- I want something I can trust. Thanlks for all this information.
How often would you recommend wheel alignment for anyone that do uber 3 to 4 days a week? I have a 2024 equinox and I've put 2,000 miles on it so far doing uber. Im already starting to notice the steering wheel to be a tad loose. It was kind of stiff at first but now slightly loose. Is it wheel alignment problem?
The alignment is all depending on the type of driving and where. If the roads are rough you should check it around 6 months but regular driving conditions and road conditions you should check every year. Hope that helps.
Not really the stiffer steering is usually in the steering system and in your vehicle it is electric and assist is controlled by computer. if you are feeling unsafe while driving you should take it in and have it checked.@@fromtheraq3898
You would want to go out with the left wheel and in with the right to aim the wheels where the steering wheel is pointing. If you put the "+" and "-" signs on the front tires, you'll know which way to go. On the left front tire, you want to go "-". On the right front tire, you want to go "+". Don't just look at whether the tie rod gets longer or shorter because it can drive toe in either direction depending on whether the tie rod is in front of the wheel center, or behind.
The correct way is to SET the steering wheel DEAD Centre BEFORE any alignment work is started and LOCK this SOLID with a clamping bar. Then do all the adjustments and if possible, on all 4x wheels. This will guarantee that the car steers straight with the steering wheel dead centre automatically.
U can’t tell until you drive the car down the road if the car is going to the right but the steering in crooked to the left. The have to adjust the outer tire rods to get the steering wheel straight
This will only happen if the REAR wheels are out of alignment in relationship with the cars body. Good modern equipment uses 4x sensors. Even if the rear tracking cannot be adjusted, the car will drive straight ahead and in-line with the steering wheel if the steering wheel is held straight ahead BEFORE the adjustment is started. I agree with you if you only set the toe-in on the front wheels. @@natelove187
I like it from 0:36 to 0:40. Can you listen to that? EASIER AND FASTER TO PERFORM, REALLY. What about the Charge for it? If it's easier and faster why do they charge so much? FUCKERS.
Where can I find an alignment shop that cares this much?
Dealership
Amen dude no joke
@@michaelmoore3050bs. Never seen a dealer that cares more than your average independent. That not saying much
So right. Why are the alignment shops like that? Could it be that they're just not good at their jobs? I took a vehicle for alignment to two shops and had to revisit both shops multiple times. The 2nd shop comes closest to completing the job and then I give up. I would love to be able to do this myself
Truth is that you can't find one. Just buy a 3 year alignment package and keep going back until they get it right. That's literally the only option if everything is chain owned.
This is the best example of how to straighten a steering wheel. Good instructions
One of those jobs you struggle with in the beginning but then once you learn it, makes you wonder why you were struggling at all. Great 90° angle tip for the inner tie rod adjustment.
This helps me, my car was off center by 2-3 degrees and it is annoying to drive. The alignment is straight but steering wasn't
really nicely done. Will share with my dealer as they haven't been able to fix my volvo c70 properly.
Just what I needed.
Nice.
3:56
Important tip there.
Also at 4:15
Thank you, glad you found the video helpful.
did alignment twice, steering still crooked
What I would normally do is if the steering is off after an alignment say in between 12 and 1 position I would just put it opposite of where it was and re adjust, test-drive and would set back normal but I think it's re calibration the systems need!
some times it's the trust angle that's bad so when you align the front you center the wheel but when you drive it it's not centered because there's a problem in the rear
im taking my car back to the tyre shop after changing tyre, i got the same issue, straight wheels but steering wheel is off to the right. Hopefully they can fix it like this
Hello I need to straighten my steering wheel by adjusting the tie rods. Does the steering wheel need to be straight Before doing this or does it not matter? Thanks
Can't I just yank the steering wheel off and center it after I plug it back in? My car drives straight but the steering wheel in 2°off center clockwise.
This is a really great vid!! Had my steering wheel straightened out in about 30 minutes. :)
Hi Greg. At which angle would you say you steering wheel was at? My steering wheel is at a 10.00 angle and pretty much all my warning lights have appeared, I put my vehicle through a diagnosis and it states "steering angle sensor mechanical fault" the mechanics are asking for a fortune to replace it. Do you think that if I do this it could fix it?
Thanks. Ben
@@Bobthebuilderghedf it seems like it's the wrong question. I think these alignment guys are in cahoots. I just realigned my old Tacoma truck because of an incompetent alignment mechanic and I used a string from the rear wheel to the front wheel and I made the adjustment and I watched it as I was ajusting the tie rod and now my front end alignment is way better than after I paid my hard earned money to have a front end alignment technician do the job right.
My car is new but when it got aligned by someone they made the left steering stiff and it’s annoying when turning left vs right. What can be my problem? Doesnt pull.
Mario, if you are in the US or Canada, please call me at 800-525-6505 as this will be easier than emailing back and forth. Thanks, Tom (in Tech)
So here's a question: I bought a classic car, and immediately changed the ball joints and tie rod ends. I then also had a professional alignment done in a shop before I first drove it. The car drives straight and doesn't feel off or twitchy as far I can tell, however I have to hold the wheel at 1 o'clock to go straight. When I turned the wheel from lock to lock I noticed that it rotated slightly farther to the left than to the right (From TDC on the steering wheel, where the tyres point slightly left as established). I then put the steering wheel on one tooth further to the right, it can now rotate exactly one and a half turns either side from TDC before hitting lock. But it now sits at about two o'clock when the tyres are pointed straight. My question is: Is that the right approach? Centre the steering wheel relative to the steering rack and then readjust the tie rod ends to suit? Or is it possible for a car to have asymmetrical lock from the factory if maybe the engineers had to compromise?
Theoretically, if everything is perfect, the rack would be centered with the tires (sorry, tyres!) pointing straight ahead and the tie rod threads being equally threaded in. There is no reason to intentionally have anything different. Due to manufacturing tolerances and life, this may not be exactly the case. You want to have the rack travel centered with the steering wheel level, and then adjust the tire rods to get your toe correct. Some vehicles have steering columns which are "keyed" and only allow the steering wheel to mate to the shaft in one position. Yours sounds like that is not the case so you can move it around. Any chance someone had the steering wheel off in the past? Could the rack or lower steering connection have been changed and the bottom connection did not get back in the same spot? Usually if there is something really bent, the alignment report will be affected, but not always. A bent steering arm can cause the tie rods to be threaded differently and yet not affect a standard camber/caster/toe alignment report. There will be issues with "toe out on turns" if you go deeper into the alignment machine screens as well as possible bump steer or other issues. (Newer cars obviously need at least a steering angle sensor reset and possibly more ADAS related resets which you don't need to worry about.) A note about centering the steering rack; the tie rod ends should be removed from the knuckles so the rack itself is controlling the full lock positions and not engaging any stops related to the knuckles.
@@SPCAlignment I rebuilt the suspension and the arms and subframes are fine. So i guess it was the previous owner who reassembled the steering column the wrong way, with the factory TDC mark way off. But thankfully the shaft isn't keyed. It's a splined shaft, and it's possible to centre the wheel between locks without taking out the whole steering column. After some digging in the workshop manual I also found where it says to do precisely that. There are no stops on the knuckles or anywhere except in the rack itself, but the idea with disconnecting the rod ends is a good point to remember for future projects. Thanks for the in depth answer!
Good theory question is where can I get my repaired in Michigan
Good video but I wish there was more discussion on rear tire adjustment when getting a 4 wheel alignment.
Se asse di spinta non è zero non avrò mai un volante centrato? Facendo allineamento!! Complimenti x i video molto utili è professionali... Sono un gommista vorrei essere specializzato come i vostri tecnici👍
What if the steering wheel is off by a very small amount, like less than 1/4 inch? I'm not sure how many degrees, just a hair off?
Any cause for concern? The truck drives straight and feels great on the road. This tiny discrepancy is barely noticeable but I do notice it and it kinda bothers me.
I don't want to seem too picky and have eyes rolled if I go back to my mechanic.
@@subtegral
Thank you. At least I know it all doesn't have to be done again.
So he's just marking the tie rod with a line so he makes sure he adjusts both the same distance. Got it. (unless there is adjustment being made) I'm going to go with the taping the wheel straight to column as I learned in a diff video and matching each front to its rear wheel w string method should get me close enough. thx
Excellent video sir!
had 3 wheel alightments this year and everytime they can't never straighten the wheel. 1 inch off to the right or left.
If an alignment machine consistently has an issue with the steering wheel being off in the same direction every time, then it MIGHT be a calibration issue. If the steering wheel is off one direction one time and the other direct the next, that is very rarely calibration but far more likely front turn plates which are not turning smoothly and easily. The turn plates should be taken apart, cleaned and any ball bearings replaced which are not smooth and round. This can make a world of difference. (As long as the front turn plates are being checked, also pull the rear slip plates apart and clean/inspect/replace those, too.)
Where you located. I have this problem alignment didn't help AND the mechanic continues to say alignment and says he doesn't know BUT I drive it many roads and speeds I'm not imagining. It so very slight but it's real and especially when I back up the wheel turns way too much and is never in a straight position even if the tires are. But the driving part is the worst it is so unnoticeable. Can you help thanks
Thanks for your interest but Specialty Products Company is a parts manufacturer. We do not repair vehicles. You may want to research some local repair shops to help you with your problem.
Most informative video I found on this problem!
I am so desperate I have been trying to work on this for almost a year, no really a year. No one here seems to get it - I almost feel like engaging your services on a video call.
My steering does not pull, if I let the steering wheel go it goes straight but the wheel tilts to the right by about 3 degrees. Since mine is right, do I flip over what you have done? (Taking into account the pre test of turning the tie end rod forward to know which is + and -)
If your toe is correct but the wheel is to the right of center it`s most likely the crown they put in roads to allow for water drainage when it rains
To compensate for road crown they rotate both tie rods equally as seen in this video to straighten the wheel effected from the road pitch
Basically adjust and road test and repeat as needed till the steering wheel is straight when driving
My steering wheel is of center to the right but car goes straight down the road. It has NOTHING to do with the crown in the roads for drainage. If it was... everybody's steering wheel would be off center going down the road
What's up with the 2.3L ecoboost in the Ranger? I'm needing to get a new truck and with 315K on the one I am replacing --- I want something I can trust. Thanlks for all this information.
I think it's a good engine. I sold mine with 40,000 miles running perfect
How often would you recommend wheel alignment for anyone that do uber 3 to 4 days a week? I have a 2024 equinox and I've put 2,000 miles on it so far doing uber. Im already starting to notice the steering wheel to be a tad loose. It was kind of stiff at first but now slightly loose. Is it wheel alignment problem?
The alignment is all depending on the type of driving and where. If the roads are rough you should check it around 6 months but regular driving conditions and road conditions you should check every year. Hope that helps.
@@SPCAlignment is it anything I can do like every month to make steering stiffer?
Not really the stiffer steering is usually in the steering system and in your vehicle it is electric and assist is controlled by computer. if you are feeling unsafe while driving you should take it in and have it checked.@@fromtheraq3898
Turn lane assistance off. Sometimes you're fighting with it and in theory could cause this.
@@zelowatch30 how do you do that? I have a 2024 equinox
And to my surprise most alignment workshop doesn't have this simple knowledge. Car got rolled in 3 times but still end up with crooked steering wheel.
So which side do I go out with and which side in if my wheel is to the left alittle?
You would want to go out with the left wheel and in with the right to aim the wheels where the steering wheel is pointing. If you put the "+" and "-" signs on the front tires, you'll know which way to go. On the left front tire, you want to go "-". On the right front tire, you want to go "+". Don't just look at whether the tie rod gets longer or shorter because it can drive toe in either direction depending on whether the tie rod is in front of the wheel center, or behind.
The correct way is to SET the steering wheel DEAD Centre BEFORE any alignment work is started and LOCK this SOLID with a clamping bar. Then do all the adjustments and if possible, on all 4x wheels. This will guarantee that the car steers straight with the steering wheel dead centre automatically.
U can’t tell until you drive the car down the road if the car is going to the right but the steering in crooked to the left. The have to adjust the outer tire rods to get the steering wheel straight
This will only happen if the REAR wheels are out of alignment in relationship with the cars body. Good modern equipment uses 4x sensors. Even if the rear tracking cannot be adjusted, the car will drive straight ahead and in-line with the steering wheel if the steering wheel is held straight ahead BEFORE the adjustment is started. I agree with you if you only set the toe-in on the front wheels.
@@natelove187
Just bought a 98 Durango and the steering wheel is off center to the right. Sooo annoying!!
Wait so if the left tire off you have to adjust the right too? Even if it’s not that much?
I am from Yemen I love this thing I can come to work for you ❤️❤️
Thanks for the kind words.
same company that makes my alignment cam kit for 13 f150?
Possibly. SPC manufactures both 86250 and 86252 cam kits for this F150. There are probably other makers of kits.
Thx 🙏
Thanks, a lot !!
Thanks
Welcome
Trying to explain to google that my steering is skew, but not this kind of skew? Anybody, please help!!!
Donny, if you are in the US or Canada, please call me at 800-525-6505 as there are some questions I need to ask. Thanks, Tom (in Tech)
Vary good information 👍👍👍
Thanks
thank you very much.Now i know
Perfecto
I like it from 0:36 to 0:40. Can you listen to that? EASIER AND FASTER TO PERFORM, REALLY. What about the Charge for it? If it's easier and faster why do they charge so much? FUCKERS.
Willow bur
I go to breaks plus and they don't seem to know how to get anything done without trying to sell bs
I think he should move them the opposite way to accomplish straightening the steering wheel.