Test: Pro mini 5v 328p Flight Controller | 1000kv + ESC 30A

Here, I tested flight controller with Arduino Pro mini 5v / 328p for Motors 1000kv and ESC 30A.
1. I use 12v to 5v step down converter to supply power to Arduino pro mini through VCC pin of Arduino board.
2. Firmware: multiwii 2.4
3. Frame: flywood 45cm (diagonal)
4. Lipo Battery: 3s 2200mAh 25C 11.1v
I can see that the flight controller is not responsive enough. That's why many experts recommend to use Arduino UNO board or Mega2560 board as flight controller (STM32 or ESP32 is better).
Datasheet of pro mini 328p 5v: docs.arduino.c...
Datasheet of ESP32: www.espressif....
Datasheet of Arduino UNO: www.farnell.co...
Datasheet of STM32: www.st.com/res...
**Conclusion**: Arduino UNO is better for F350 or F450 diy quadcopter. STM32 and ESP32 are the best choice.
Best relevant project:
Joop Brokking (Wrote his own FC codes) at • YMFC-AL - Build your o...
WARNING!
Please remove the propellers when you calibrate your diy drone. It can be very dangerous!
Otherwise, do with your own RISK!
#diydrone #arduino #arduinoproject #flightcontroller #test #promini #uno #ardujimmy

[@achmadramdhani05]

I'm waiting until the drone can actually fly 👍🏻

[@ArduJimmy]

Sure, as soon as two ESCs and two motors are available 😁

[@achmadramdhani05]

@@ArduJimmy ganbatte 💪

[@ArduJimmy]

@@achmadramdhani05 今、とても苦労しています。