Fixing holes in aluminum gas tank with JB Weld SteelStik
HTML-код
- Опубликовано: 7 сен 2024
- I drilled holes in my tanked and fixed it with a SteelStik. The product says it works on gas tanks, so I gave it a try. It worked well for me, and is still holding up!
Did you guys use this stuff? How well did it work for you! Comment below, it can help others, and I am curious!
Legend has it, the JB Weld is still holding... and he’s still not responsible for anything...
This video should be called "I'm not responsible".
Paul R hahaaaaahhhahah
😂😂
Lol
Lmao 😆🤦🏻♂️ smh
"I'm not responsible for any damage to anything that happens". LOL. Love it.
oh my God im all burned and cut and im bleeding and half my house is gone. You are responsible, for all of it.
jordanjcm jordan is your house still on fire? Do you take checks?
His house is gone. I'm triggered.
I'm not responsible for damage...anything that happens as a result of this comment....I'm not responsible for any health risks this may have caused...
No, I don't. Sorry.
It worked on my bike...appreciate you posting
Sean Gerber Great, is it still working on your bike now?
@@keithc8108 ya ... let me know if it has been coming off your boat. Its kinda risky for me because of where the tank sits. don't worry I won't sue you if I survive
The best video on gas tank repair I have viewed
Thanks! I looked for videos to help me pick which product to use. I couldn't find any decent video for aluminum tanks. I read online to use the steelstik so I decided to make a video about it to hopefully help people.
Great video! JB is working well so far.
Hello IAM using this on a injector rail, and works amazing , just put a lot on it!
You are responsible
Yes you are!!!
When I was young and really dumb (I'm now old and fairly dumb) I was installing an amplifier under my car seat and I drilled a hole in the fuel line. Literally the entire fuel tank worth of fuel squirted up into the interior of my car. Anyway this stuff would have been handy to fix it probably. Pretty sure it was your fault too btw.
Damn lol you live and you learn brother. 🤙🏼
Gas tanks HATE this one weird trick
Informative. I broke my oil filter housing on my Mercedes and a piece cracked off of the aluminum housing. I have been using regular JB Weld which has been holding the crack fine but there is this consistent hole that’s the size of a pin needle that oil keep spraying out of. The JB Weld seems to keep dripping so it never really plugs that hole so I’m really hoping this does the job so I can drive my car
Let me know if that works !
Did it work?
So how is it?
Used on my radiator for a temporary fix until the one I ordered came worked great!
I'm guessing the plastic part of it was cracked?
When I was a kid I punctured an aluminum case on my xr200 lost the oil didn't blow the motor up my dad fixed it with J-B Weld 10 years later sold the bike still worked also had a ranger when I was young backed into a bank punched a hole in the fuel tank about the size of a pencil used J-B weld steel stick and it held until that truck went off to the junkyard the stuff is amazing handyman's secret weapon
My car just blew up... and you're responsible.
Dang bro I drilled holes in my gas tank and tried this out my self bit I didnt buy enough steel stick for the hole. Now I'm broke, dont have a ride to work to make money, and I'm gonna lose my house and all my assets for not paying because of you. You are responsible
I didn't wear safety glasses when using my jd weld steel stick and I regret it. The jb weld flew in my eyes and now they are permanently bonded together. Idk how I'm even typing when I can't see!
I just patch my boat fuel tank with it it was really bad so I will see how long it holds ,, plus I will use a por-15 fuel tank sealer that should help
WOW really good video, I thought the screw driver would chip away big pieces
.
.
.
.
.
.
Your finger nails are so clean
Yeah, because I work at Taco Bell, I have to keep them clean, since I am the one that wraps all the food.
How’s it holding up after 5 years?
thank you
I cut my finger of while cutting the JB Weld. It's all your fault. LOL
I blame u if anything happens negatively
Are you resposible for turning yourself into a meme?
Angle grinder on a fuel tank, wonderful
Aluminum, no sparks
i have used it on gas tank before and over time the ethanol eats thru it... didnt have that problem befoe ethanol combined gasoline came along...
How did it hold up? Thinking of using this to seal my fuel pump lid down. Had to drill out the screws that were originally in it. Thin layer and some screws to tighten it should work
You are responsible
I THOUGHT GLOVES 🧤 WERE SUPPOSED TO BE WORN WITH THIS STUFF?? 1ST VIDEO....* WITHOUT PPE* I'VE SEEN USING THIS STUFF 😮
Hey I got this on my hands and then put my hands in my mouth and now I have steel stick permanently affixed to my teeth. I feel like you have to be responsible for this
Maybe you needed to microwave it off your hands first?
I got some on my penis...bitches love it though.
Would be great if products like this bonded to the items in need of repair as well as they bond to - skin. Good video, thanks. Is it still working?
lilevil 1955 Yes the patch job is still holding! And I agree, if it bonded to surfaces as well as skin.... It was not easy removing from my skin. I had it in my fingerprints for a few days.
I watched this video, bought some Steel Stik and contracted Covid from the sales assistant. Who do I blame?
All the sales reps are vaccinated though
any update about fix?is it still working?
samif khan still holding up
thanks
How about now
Yes it holding now
How is it holding up? How long has it been now??
Been a diesel mechanic for 23 years, we've tried this a few times doesn't work. Will leak after a few days of using fuel tank.
I cracked my front cover.on my 6.broke 2005 f250 jb weld does in need not work .... Haha
@@cootarrieta1374 definitely works
@@tommartin3016 fifty/fifty. It worked on my Jeep Cherokee exhaust. On my diesel it did not work, maybe I didn't mix it correctly but I tried the. Paste and the tube. Got very hard but
cracked after fourty miles
I used this on a Yamaha XS650 fuel tank, very disappointing, leaked like a SIVE, do not recommend this procedure at all?
Does it handle for car AC high pressure pipe leakage?
That's pushing 200 Psi, and heat changes (heat from the engine, then when the ac is running the pipe will get super cold. Personally, I wouldn't patch any ac lines. I would replace them. At least with a used one from a salvage yard.
How would you repair stripped threads with this stuff? I have a stripped bolt hole. I need to know how to use this stuff for that kinda thing. Please help.
Interesting...I have some holes in the aluminum hood of Dodge Charger Police I recently purchased...My plan was to patch the holes and put a big stripe decal down middle of the hood/roof/trunk to cover the holes from police lights ...then I don't have to paint it. However not so easy to repair aluminum I've been told....right now there filled silicone, which works fine...but cant smooth it out good enough to put a decal on it nicely. I may give this a shot. Any have experience doing such a thing?
I would recommend something else, you can get body filler or something of that nature
@@BEERSnGEARS Thanks....My brother has been using Evercoat metal to metal for years on his boat. It's a hobby car, I'm not going for the blue ribbon car at the local car show. Some clown at a local collision place said I needed a new hood, couldn't fill the tiny holes without special high tech stuff....told him he was full of krap, seen plenty of hole's filled on aluminum with ordinary filler that are holding up just fine after 5 to 10 years.
Did it bond to the metal after polishing?
Watched this video, now have Herpes, it's your fault ..
Thanku
Nitish Raj You're welcone! Thanks for the positive comment.
Thanks for the video bud, looks like a possible cheap and easy fix! So what kind of fuel tank was that? I am debating on trying this to my boat fuel tanks that have had some oxidation pitting. Was your tank for a boat? How well is it holding up now a year later???
Brandon Susich Yes it is a boat fuel tank. It's aluminum and it's built into the floor. It seems to be holding up.
I'm wondering this my self
Yeah I just pulled my boat tank and have a pin hole just like yours.. still holding up?
How big of a hole can you fix with this ?
Garrison McCarthy I wanted to know too I have a e38 with a ga$ leak I bought a new one from the junk yard but the junk yard put big a$$ $quare hole$ in it to dry it out how in the Gucci am I going to plug it up?
i have apron but no glovs are you still liable my lawyer wants to kno
Thanks
It's somebody car doing a willy while he saying I'm not responsible
Acetone without gloves?
MrJohnnyDistortion I would recommend gloves, if I didn't say it in the video. I can't remember if I mentioned that. ;)
BEERS 'n GEARS I know that you kept saying that you're not responsible. Afraid of a little - lItigation? LOL
He’s not responsible he said ! Damn! Lmao
@@reddawng43x91
Who said that?
Did it work
How's it holding up?
On the contrary, you are responsible for the damage you’ve done to yourself. Lol
I went to watch this video on my iPhone, but instead picked up a fork, and stabbed myself in the eye. Are you responsible?
Let me ask a legal advisor.
My friend can I ask why didn't you just patch and fill the holes as you would have saved a lot of JB? By the way I'm not responsible for this comment
All I got was that you are not responsible. Are you responsible for that?
Young people should learn to take more responsibility !
Wait, are you responsible for my injuries? jk, thanks for the video
would you be able to sand this to a smooth finish and paint it?
vitriolix you can but don't sand it too thin it'll be weaker
Cut it like coco
shut up and show us...mister responsibility...
Hank Net Thanks for the positive comment. 32 seconds.... Sorry if you can't handle that.
So is a lawyer threatening him ? What is the point of making a video with a warning? Consider what is to be done and use the correct epoxy for the job... A simple holding of a screw's threads may be done with a $5 pair of small epoxy tubes by LocTite when a larger job with real stress may need JB 'Steel Stik' ... use common sense!
"I'm not responsible for my terrible camera work."
So can I take it you are NOT responsible ????
you should read the caution on the JB well it says to wear gloves and you said it yourself where gloves it is toxic on your skin
ELECTRIC GRINDER ? THAS AS FAR AS I GOT WATCHING
Well, the tank had been cleaned and emptied and cleaned again. Also, it's aluminum and in case you didn't know.... Aluminum does not spark. So.... Whatever bro.
Lmao love the intro 🤣
Hey I was wondering if it is still holding
LOL NICE INTRO
It worked for me too and its all your fault.
I wonder if this stuff will work on metal and on a quarter inch diameter hole? Anyone know?
Thank you
I'm not responsible 😂🤣😅😆😁🤦♂️
Is it still holding up?
Yes
I DONT NO HOW TO USE YOUR UP AND DWON METAL
I'm not responsible for you wanting a sex change !
He is more than likely from California, lol. I'm not responsible for anything.
This didn't work and you are responsible
Learn how to tig weld. Oh and I was severed at the mid section, but nobody here is responsible.
Tig weld a fuel tank?
Wear your gloves at
Dude blow your nose or push your glasses up. Gay disclaimer dude.
Thanks for the positive comment! 7 year old channel with
I'm just saying you might here twice as much views, if you didn't have so much nasal noise. Plus to add there is no shame in wearing the glasses band to keep your glasses on and up? Much love, no homo
that stuff is garbage you should have just used jb weld professional. the consistency of putty should have given it away. A terrible filler and bonder.
It's been a few days and you still haven't cleaned your finger nails................................
It's called working daily. You should try it.
I've worked more years than you have been alive....................
@@SlingbladeJim when you work in an office the only thing you'll get under your nails may be a paper cut
No office Skippy.....30 years in the hate factory.............
So wait... I get the great responsibility part but what about great power your not a hero son let's get the gloves out alright Peter Parker.
I fixed a pin hole this way:
ruclips.net/video/E7VpnEo4TuE/видео.html