NC Miata | Racing Beat Header Only Test Drive

Поделиться
HTML-код
  • Опубликовано: 6 сен 2021
  • Driving the miata around with an upgraded racing beat header and no other powertrain mods. I used spark plug non foulers to eliminate the CEL.
  • Авто/МотоАвто/Мото

Комментарии • 67

  • @JETZcorp
    @JETZcorp Год назад +7

    The Miata is nice, but I'm in awe of this incredible palace of a garage and driveway. Living the dream.

  • @wg5768
    @wg5768 2 года назад +31

    Your commentary is hilarious! I put the Goodwin Racing catted header on my NC because I was worried about state inspection. I connected it to the Helmholtz midpipe and Roadstersport Super Q muffler. I laughed when you mimicked the exhaust sound when driving. Not a fast car,but sure is fun.

    • @CameronsCars
      @CameronsCars Год назад +2

      How do you like it? Is the catted header enough to prevent any bad smells on startup? Or harsh rasp?

    • @smiles564
      @smiles564 Год назад

      Did you do the catted header first? It the whole system? I have that entire setup on my soft top minus the cat. I'm looking at a new setup for my PRHT. Considering just doing a catted header with stock mid pipe and muffler.

  • @therealrealshocker
    @therealrealshocker Год назад +2

    Finally this is the video I've been looking to find Thanks for posting 👍🏼

  • @smilin_lin
    @smilin_lin 2 года назад +5

    +1 for racing beat miata parts. they make great exhausts as well

  • @HeCute_
    @HeCute_ 2 года назад +6

    did you end up getting a tune for your miata? if so, which tune? thanks

  • @robertpearce5553
    @robertpearce5553 Год назад

    Would you recommend a 2.0 stg2 springs retainers upgrade?

  • @youmongrel
    @youmongrel 8 месяцев назад

    Damn I wish you'd recorded the process, I've seen a couple header swap video but no one else went through the battery canal to do it! Of course, they didn't throw their belts off either...

  • @TheLambo123254
    @TheLambo123254 2 года назад +1

    great video

  • @robertpearce5553
    @robertpearce5553 Год назад

    How big was the header diameter? 1.8"?

  • @chriskayyy1808
    @chriskayyy1808 2 года назад +1

    What kind of sterio is that i need one for my nc

  • @iam_herald8084
    @iam_herald8084 Год назад

    May I know which tuner did you go to?

  • @turbog8r
    @turbog8r Год назад

    Hi, love the sound. Do you have any videos of this header with the roadster sport hemlholtz muffer?

    • @ZentRose
      @ZentRose  Год назад

      I have one with the race single Helmholtz muffler

  • @RANDY_MAR5H
    @RANDY_MAR5H 2 года назад +7

    Can you do a video from the back of the car and some revs/start up? Hard to find a video of JUST a header change and everything else stock. Thanks

  • @ericmccolough2482
    @ericmccolough2482 Год назад +1

    Which tune did you get?

  • @thewildwestpimp
    @thewildwestpimp 2 года назад

    Where can I find a Bluetooth radio like that?

  • @ROSIE18er
    @ROSIE18er 11 месяцев назад +1

    I wonder if the watch survived being slammed in the hood 🤔🤔

  • @denisfilatov7609
    @denisfilatov7609 2 года назад

    Your clutch seems so effortless, it’s crazy. Maybe you can help me with my issue. So I have a new clutch installed, new flywheel, new everything but for some reason my clutch vibrates when I press on it or if I rev match above 3000 rpm. I can just feel this vibration/pulsation in the pedal. Any input? I was thinking maybe bad engine mounts?

    • @ZentRose
      @ZentRose  2 года назад

      Is it vibrating through the pedal? I’d guess throw out bearing

  • @chriskayyy1808
    @chriskayyy1808 2 года назад +1

    What offsett are thoseeee

  • @robertpearce5553
    @robertpearce5553 Год назад +1

    Hello Zent have you tuned using Ecutec just header and tune? If so what are the gains especially torque!!

    • @ZentRose
      @ZentRose  Год назад +1

      Yes but I did not get it on the dyno with that combo. Header and tune provides a noticeable bump in power

  • @machineslave3
    @machineslave3 2 года назад +1

    Haven’t watched your channel in a long time but I’m surprised to find you’re driving a Miata, especially since many of your early videos were about S2000s. Why the switch?

    • @ZentRose
      @ZentRose  2 года назад +2

      They are cheap. A cammed 2.5 NC is a little faster than an S2000. Pretty similar, fun to drive cars.

    • @tylerhoover1770
      @tylerhoover1770 Год назад +1

      @@ZentRose can you confirm this?what cams? Stock rotating assembly?

  • @Living-gnu-64
    @Living-gnu-64 2 месяца назад

    Will thus header fit the 2.5L in the mazda6? If so would it be less restricted, more restricted, or mostly the same?

  • @CameronsCars
    @CameronsCars Год назад +3

    Did you notice any rattling or smell? I hear the header deleted the first catalytic converter but the exhaust has a second one?

    • @Mivic666
      @Mivic666 Год назад

      Theres 2 cats. One in the middle of the exhaust

    • @Mivic666
      @Mivic666 Год назад

      When you delete your cats, you’re definitely going to smell gasoline

  • @danielcovich4450
    @danielcovich4450 2 года назад +1

    Love the videos, in the process of getting an nc as well. Is this header catted or non?

  • @ianfairbanks1318
    @ianfairbanks1318 2 года назад

    That’s always hilarious

  • @saberbfv1954
    @saberbfv1954 2 года назад +2

    Why did you sell the electric car? besides the Miata being more fun to drive was there another reason?

    • @ZentRose
      @ZentRose  2 года назад +1

      I got a new job with a longer commute. Otherwise I would have never sold it. The fiat is a great city car.

  • @zaklingenhammer2149
    @zaklingenhammer2149 2 года назад +1

    Where did u get the screen u have in the dash?

    • @JETZcorp
      @JETZcorp Год назад

      Most car stereo shops should be able to do an install like that. There are a lot of double-DIN touchscreen car stereos to choose from. A decent shop should allow you to test several in the showroom and then they can install it in an afternoon.

  • @robertpearce5553
    @robertpearce5553 Год назад

    Hello Zent I'm going to buy a GWR header for my 08 NC how long should it take a tech to install? I'll give your tips about moving few things

    • @ZentRose
      @ZentRose  Год назад

      This was a pain in the ass for some reason. This took me longer than the clutch job took. I'd say 4 hours is reasonable.

    • @robertpearce5553
      @robertpearce5553 Год назад

      @@ZentRose oh wow I thought moving the battery the heat shield and letting alternator hang would have made easier oh well thanks for info!!

  • @chrismcnie
    @chrismcnie 2 года назад +2

    how did you tackle the o2 sensors? did you move one to the mid pipe?

    • @ZentRose
      @ZentRose  2 года назад +4

      The RB header has a spot for it. I just used spark plug non foulers to eliminate the CEL

  • @christophercano5708
    @christophercano5708 2 года назад +1

    Is it that much louder? I want more power without the rice.

    • @ZentRose
      @ZentRose  2 года назад

      No it's not loud. Keep the stock mid pipe and it is nice and quiet.

  • @BillRyan
    @BillRyan 29 дней назад

    You said you have a stock CAT on the car. Is that further down? No CAT on the header means it's illegal in most states and can only be used for racing.

  • @MickehPuppeh
    @MickehPuppeh 2 года назад +4

    Does the header make an appreciable difference in power and torque, or is just a tune (even without the exhaust) enough to get the most out of it?

    • @ZentRose
      @ZentRose  2 года назад +2

      Yes header and tune are the best bang for the buck. The nc is a different car with these two mods!

    • @tomasabraham5651
      @tomasabraham5651 2 года назад

      @@ZentRose hello and greatings from Slovakia :) I am looking for Skunk2 manigold 4-1 and chiptunning. Do you feel really big difference after installing the manifold? Did you tuned ecu ? What is the results? Thank you very much for any response.

    • @ZentRose
      @ZentRose  2 года назад +1

      @@tomasabraham5651 Yes it is tuned now. The header and tune is worthwhile and noticeable. I picked up about 20hp.
      I plan to swap this engine out with a built 2.5 soon.

    • @tomasabraham5651
      @tomasabraham5651 2 года назад

      @@ZentRose Only 20hp? I would expect more... Maybe 25-30... I know its not turbo charged car, they are much better for tuning. Anyway, do you feel the car is much faster? I had only turbo cars, so after ecu tuning it was big difference 60hp and 100nm. Therefore I am asking if its worthy to change manifold and chip miata.

    • @trackedmiatas3509
      @trackedmiatas3509 2 года назад

      @@tomasabraham5651 You have to be more realistic about the NA power gains on a 2.0 liter engine that makes about 160 to the rear wheels when stock. Header and tune will run about $2,000 and net you 10-12 rwhp max.

  • @nchounramany
    @nchounramany 2 года назад +1

    How does the miata compare to your old s2000 ?

    • @ZentRose
      @ZentRose  2 года назад +9

      The NC Miata is a better daily driver. I haven’t had it on track but overall I prefer the Miata.

    • @FATmenDRIVEtrucks
      @FATmenDRIVEtrucks 2 года назад

      This I'd like to know too maybe after track driving. Also hope you 2.5 swap with cams in future really makes things fun

    • @rivalrepairs
      @rivalrepairs 2 года назад +1

      That S2000 cr you had would be worth some money now. I miss my S2000

    • @CameronsCars
      @CameronsCars Год назад

      @@rivalrepairs the s2000 is a better track car and is way more stable over 100 mph.
      I currently own one of each lol

  • @ZacharySound
    @ZacharySound Год назад

    Legal only for use in California for racing not for use on highway unfortunately its out for me.

  • @WTF8375
    @WTF8375 2 года назад

    5 or 6 speed?

  • @julianhawkins9423
    @julianhawkins9423 8 месяцев назад

    Awesome work maybe clean hands of oil before stepping into car to drive next time 😂

  • @jumpninthedarkalley
    @jumpninthedarkalley 2 месяца назад

    So how much more horsepower/torque do you get? Might just have to do it on my NC