Just a heads up to anyone watching this, your AIO's pump should never be above the top of your rad. All aio's have air in them and as we all know, air rises to the top. usually its not an issue especially with larger rads but this case looks like it has a dedicated spot for a cd drive.
Yup why is this video on here? The pump even though it’s a 50 dollar aio is gonna have air guaranteed and air almost from the get go. This should be a how no to video.
James two cents made a video explaining that percolation collecting in the pump only happens if the pump is significantly higher than the top of the start point in the radiator. It’s simple science man.
Wire ties in a computer build, no chance of a short then, even if one was to brake or come loose ???? I'd eliminate all possibilities with plastic cable ties. As others have said, Duel channel would've better.
I have the same motherboard and an 240 aio liquid cooler from cm. If u want to control your pump and radiator's fans also have case fans running.. You have to do so: Connect Pumps 3pin to the system_fan. Both radiator's fans to CPU_fan (with Y splitter). Now you are left with no fan headers for your case fans. Use an molex to multiple 4/3 pins cable. Your case fans should be voltage control.
@@hiroaoi1152can’t remember if this has RGB header, you may have to connect a controller like a Corsair commander pro. Not many headers on this one specifically. Have one with a DS3H in shop for some upgrades. I will report back in a little.
When you get pump whine and audible water gurgling in 6 months, let me know how it goes. If it’s mounted vertically, the loop needs to be at the bottom for longevity due to air bubbles that will inevitably form over time. Kyle is 100% correct on this.
I may be wrong, but I think that mounting the radiator on the front of the case would decrease the airflow in the case, making the entire system run hotter.
2:11 ребята кто знает из чего эти шайбы из резины или пластика и где такие достать ? отдали такую же водянку , самих круглых с отверстием в центре шайб нету
@@gvillanueva5317 bro wont cost 2-200 rupees extra. he has used 16gb only, it would not cost more than 200-300 to upgrade to dual channel, he is not saving money'
@@rzy5746 idk where you are living but here where I live it's almost the same to get a 16gb ram stick and 2x8 gb sticks. So naturally I'd go for 2x8 gb for dual channel
@@vixi901 no, if there is Air in the System somehow it Will br at the cpu and do bad cooling or No Cooling so u better have the Air in the radiator that will affect almost Nothing.
@@vixi901 that is not the most important part; the important part is the pump should be lower than the top of the radiator. Air will collect in the highest point of the entire loop. You want that to NOT be the pump. Radiator with the tubes coming out of bottom is best, but tubes at top is still ok, if not optimal, but pump being somewhere below the top of radiator is by far more important.
Hey i am confused the motherboard itself doesn't have a pump header what do you need to do to connect the aio to the motherboard properly without the pump header i tried to find that awnswer but i couldnt find the right one but what do you need to do
Why is the cooler pump above the rad it should never be like that any air pocket will stay in the pump and it will shortern the life span of the cooler
У меня интересный вопрос. Не будет ли система перегреваться от того, что вентиляторы на радиаторе работают таким образом, что втягивают уже тёплый воздух от самого радиатора внутрь компьютера?
No, the heat that comes from the cpu, circulates into the heatsink and from there it dissipates all over the heatsink and from there the fans spread out the air in the case or outside the case so the heatsink doesn't become a frying pan, hope you understood that.
hello, I have this motherboard and I want to buy an arctic freezer 3 360mm and I don't know if it is possible to install it on this board at the moment, my question is... can I put the pump in place at the back fan how did you put it you mean it will work?
Where does the liquid cooling pump connect? They answer me please is that I have that mother and bought the same liquid and I don't know where to connect the pump
@@KLGamers Hi thank you for the response! but what I would like to say is that, if you can add the total expenses like if it's a 700$, 800$ or 1000$ pc.. or in your case in RM.. Sorry if it looks like that I am lazy to check the prices of each parts one by one but it gives us, viewers, a very quick idea how much was spent on every build. Thanks once again!
Hey question did u need to do a bios update or it was compatible from out box. Also if u can. Cam u tell me how i can find out if something needs a bios update before I get it.
i just bought the same motherboard and cpu but the cpu wont fit. any suggestions or tips? what other cpu would be good for gaming on this motherboard? that will fit
So many people commenting on the single channel ram but doing it like this instead of 2 8gb sticks is that down the line you can upgrade all the way up to 64 gigs without having to replace the whole set
If I already something plugged into the white plug on the bottom right of the motherboard does it matter if I also plug in the ones from the water cooler rite next to them? I’m sorry I just got my computer 2 days ago
i happen to like that motherboard model i've been trying to recommend it for the third gen ryzen cpus so that people wouldn't have to pay so much for a decent build to work, but i'm not sure if it will work with them out the box without a bios update, i know for a fact it works with the second gen chips though. nice build by the way, you see people? this is how its done we don't need a whole bunch of rgb lighting or a whole bunch of fans for a build to look good that stuff is for the crazy enthusiasts, for most people these parts are just fine.
KL Gamers you get 35-50% more performance for a marginally low price, wtf is your priorities? you use a last gen ryzen cpu and single channel ram and you blow all your money on water cooling and still say more expensive lol.
Superb video 👌🔥. Just one thing, be careful with that method of application of thermal paste. It can causes bubbles 👀 and then overheating. Another thing is, that ram module should be installed in the second slot (left to right) to best performance. Check out the manual 👀 Regards! 🙏
@@manjudevi9542 Just connect the AIO pump in the fan port of the CPU. Let the main fan port control that like a conventional cooler. And the fans, connect them in the other fan ports You should be save 🙂
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Dual channel is perfect than spending it for an AOI.
Just a heads up to anyone watching this, your AIO's pump should never be above the top of your rad. All aio's have air in them and as we all know, air rises to the top. usually its not an issue especially with larger rads but this case looks like it has a dedicated spot for a cd drive.
Yup why is this video on here? The pump even though it’s a 50 dollar aio is gonna have air guaranteed and air almost from the get go. This should be a how no to video.
James two cents made a video explaining that percolation collecting in the pump only happens if the pump is significantly higher than the top of the start point in the radiator. It’s simple science man.
You need dual channel on that rig. Ryzen with one stick of ram only!? reallyyyyyyyyyy!!!!!
Wire ties in a computer build, no chance of a short then, even if one was to brake or come loose ???? I'd eliminate all possibilities with plastic cable ties. As others have said, Duel channel would've better.
well he is not using the vega graphics. so single channel is fine
@@bestdaddyoftheyear What Vega graphics? I am just talking about the CPU side, Ryzen needs dual channel to really perform.
@@bestdaddyoftheyear Dual Channel is still significantly better than single channel vega graphics or not.
How did give power to your pump as there are only 2 fan headers on the mobo???
14:00 Cable converter 3 Pin-SATA
16:55 Power supply
Build this PC:
Motherboard: MSI B450 TOMAHAWK MAX
Cooler: NOCTUA NH-U12S CHROMAX
Processor: AMD RYZEN 5 3600
Memory: CRUCIAL BALLISTIX 16GB 3600MHz CL16 [2X8GB] BLACK
SSD: Kingston A2000 500GB M.2
HDD: WD BLUE 1TB
Graphics Card: MSI GeForce GTX 1660 SUPER GAMING X
Power Supply: SEASONIC FOCUS GX-550W GOLD | BE QUIET! STRAIGHT POWER 11 550W GOLD | FRACTAL DESIGN ION+ 560W PLATINUM
Case: FRACTAL DESIGN MESHIFY C TG | NZXT H510 | LIAN LI LANCOOL II MESH RGB
Fans (optional): Noctua NF-F12 PWM chromax.black.swap 120mm
AMD says that Dual Channel is better and faster than Single Ram
Try it ......
He actually mention 2x8 gb lol
@@Sh11roe he can't read bro😂
The flex on that motherboard at 11:20 made me cry
OMG
Dude i saw that just now and was like omg what if it had snapped lol
super, simple and neat. you can also run the ID cooler fan cables behind the motherboard holder bro
Good call!
these specs are literally my realistic dream pc
Okay 👌👌
Might as well get a 2060 at this point. Whenever silicon products come back in stock the 2060 will drop to dirt cheap
@@static.snow22 tbh i couldn't care less about ray tracing, which is why i'd just get a 1660 super
@@yor0z808 dude there are so many other better cards than 1660
@@trickzVI true but i'm pretty broke, not to mention that i live in a third world country
I have the same motherboard and an 240 aio liquid cooler from cm. If u want to control your pump and radiator's fans also have case fans running.. You have to do so: Connect Pumps 3pin to the system_fan. Both radiator's fans to CPU_fan (with Y splitter). Now you are left with no fan headers for your case fans. Use an molex to multiple 4/3 pins cable. Your case fans should be voltage control.
Does it support RGB fusion?
@@hiroaoi1152can’t remember if this has RGB header, you may have to connect a controller like a Corsair commander pro. Not many headers on this one specifically. Have one with a DS3H in shop for some upgrades. I will report back in a little.
вентиляторы в водяном охлаждении подключаются как один или по отдельности?
can connect as one or separate
How to kill the pump on your AIO, mount it so it's at the highest point of the loop so bubbles can collect in it...
it'll work just fine
When you get pump whine and audible water gurgling in 6 months, let me know how it goes. If it’s mounted vertically, the loop needs to be at the bottom for longevity due to air bubbles that will inevitably form over time. Kyle is 100% correct on this.
Lmao this KL gamers don't know shit about pc building HAHAHA "it'll work just fine" wtffffff
I may be wrong, but I think that mounting the radiator on the front of the case would decrease the airflow in the case, making the entire system run hotter.
2:11 ребята кто знает из чего эти шайбы из резины или пластика и где такие достать ? отдали такую же водянку , самих круглых с отверстием в центре шайб нету
Set your priorities bro, i'd rather spend some cash on ram rather than spending money on an aio lewls.
Why do u need more than 16gb ram???
@@rzy5746 2x8 RAM sticks for dual channel
@@gvillanueva5317 bro wont cost 2-200 rupees extra. he has used 16gb only, it would not cost more than 200-300 to upgrade to dual channel, he is not saving money'
@@rzy5746 idk where you are living but here where I live it's almost the same to get a 16gb ram stick and 2x8 gb sticks. So naturally I'd go for 2x8 gb for dual channel
@@gvillanueva5317 in India. Yeah thats what i am saying he is not saving money on ram
Крутое видео. Все понятно. Многие на каналах словесный понос несут, а в итоге ничего не понятно. Спасибо, всё доступно
Mounting the radiator lower than pump is a big mistake, last time i saw someone with that kind of layout his aio lasts only for 7-9 months.
Thanks for info
@@KLGamers he wrong
@@vixi901 no, if there is Air in the System somehow it Will br at the cpu and do bad cooling or No Cooling so u better have the Air in the radiator that will affect almost Nothing.
@@akula3321 yes i know the tube have to be down if mounted on front
@@vixi901 that is not the most important part; the important part is the pump should be lower than the top of the radiator. Air will collect in the highest point of the entire loop. You want that to NOT be the pump. Radiator with the tubes coming out of bottom is best, but tubes at top is still ok, if not optimal, but pump being somewhere below the top of radiator is by far more important.
this is exactly what i looking for TYSM
u are welcome 😆👌
How many rgb fans (with 2 fans of watercooler) can you put on that motherboard?
question pls answer: where did you put the pump cable not in the motherboard? is it not a pwm?
can plug in into the motherboard or use an adapter to convert to SATA power
@@KLGamers which is better? or is it just the same even its on the mobo or sata ?
@@rosoon if u dint put it in the mobo it wil always run at full speed so if u want als quiter System or u want control over the pump u plug it in.
Hey i am confused the motherboard itself doesn't have a pump header what do you need to do to connect the aio to the motherboard properly without the pump header i tried to find that awnswer but i couldnt find the right one but what do you need to do
bro asking genuinely, you connect the aio pin to a SATA pin from the PSU right?
yes you can
I like the RGB ram. The water cooler is nice also. 😁
Good choice!
Why is the cooler pump above the rad it should never be like that any air pocket will stay in the pump and it will shortern the life span of the cooler
sometimes
У меня интересный вопрос. Не будет ли система перегреваться от того, что вентиляторы на радиаторе работают таким образом, что втягивают уже тёплый воздух от самого радиатора внутрь компьютера?
No, the heat that comes from the cpu, circulates into the heatsink and from there it dissipates all over the heatsink and from there the fans spread out the air in the case or outside the case so the heatsink doesn't become a frying pan, hope you understood that.
hello, I have this motherboard and I want to buy an arctic freezer 3 360mm and I don't know if it is possible to install it on this board at the moment, my question is... can I put the pump in place at the back fan how did you put it you mean it will work?
Nice builds, bro! Thanks for the help.
No problem 👍
hihi just wanna know the transparent side of this e500l master box is a piece of tempered glass or acrylics???
Plastic
Where does the liquid cooling pump connect? They answer me please is that I have that mother and bought the same liquid and I don't know where to connect the pump
Best is A.I.O pump fan connection but usually can connect to CPU fan but best is connect to 3 pin to molex and connect to power supply
@@KLGamers how do you monitor if the pump is still working?
Is there not any pump headers as you plugged it into the power supply?
nice, id cooling frostflow x 240L snow edition, already install in my pc fews day ago. price rm238.00, cheap aio in lelong
Great video, but next time make sure you use dual-channel instead. It will bring a significant performance gain.
Thanks for the tip!
@@KLGamers also, ur pump shouldn't be above ur RAD.
I have the same motherbord and all are working fine, but AIO crossair h100 pump rgb is not working. can you help me with that how I can fix that issue
Satisfying to watch this video
Is it possible to replace the fan on liquid cooler? like rgb fan?
yes
Yes man
Hello how did you connect the 3pin aio pump connector to your mobo that has 4pin rgb cpu fan header?
14:00 Cable converter 3 Pin-SATA.
16:50 power supply
Which one is best board gigabyte b450 ds3h or b450 gaming plus max
Everyone: wow such good specs
Me: wow such good cable management
Okay👌
those cable management is messy to me from front view, but rear is okay.
ID-cooling or Aigo Darkflash which one performs better with lower temps? I have seen you had them both in your customs built
Nice build but why put watercooling on a 2600 when you can keep these extra bucks and upgrade your gpu or cpu
maybe next time upgrade a 5600x
can you please add on the description or on the video how much was your total expenses for every builds? It will be very helpful. Please! Thanks!
Processor = AMD Ryzen 5 2600 6 Core 3.9GHz = RM590
(Amazon link) = amzn.to/2YGanLM
(Lazada link) = c.lazada.com.my/t/c.NVTK?url=https%3A%2F%2Fwww.lazada.com.my%2Fproducts%2Famd-socket-am4-ryzen-5-2600-34ghz-processor-i421788731-s613874952.html&&sub_id1=2600&sub_id2=JCI&sub_id3=535
(Shopee link) = invol.co/cln1vr
Processor = AMD Ryzen 5 3600 6-Core 12-Thread Unlocked Desktop Processor with Wraith Stealth Cooler
(Amazon link) = amzn.to/2O2NAYT
(Lazada link) = c.lazada.com.my/t/c.frpTb?url=https%3A%2F%2Fwww.lazada.com.my%2Fproducts%2Famd-ryzen-5-3600-36ghz-socket-am4-processor-i527378259-s1039618382.html&&sub_id1=3600&sub_id2=YES&sub_id3=758
(Shopee link) = invol.co/clq2d3
Cooler = ID-Cooling Frostflow X 240 CPU Liquid Cooler Snow Edition
(Amazon link) = amzn.to/31015Pi
(Lazada link) = c.lazada.com.my/t/c.bMCzBA?url=https%3A%2F%2Fwww.lazada.com.my%2Fproducts%2Fid-cooling-frostflow-x-240-cpu-liquid-cooler-snow-edition-i592338167-s1196794038.html&&sub_id1=Frostflow&sub_id2=ECT&sub_id3=210
(Shopee link) = invol.co/cly4bt
Motherboard = Gigabyte B450M DS3H (AMD Ryzen AM4/Micro ATX/M.2/HMDI/DVI/USB 3.1/DDR4/Motherboard)
(Amazon link) = amzn.to/3acsYGJ
(Lazada link) = c.lazada.com.my/t/c.bMycRY?url=https%3A%2F%2Fwww.lazada.com.my%2Fproducts%2Fgigabyte-b450m-ds3h-matx-motherboard-i811974737-s1895212056.html&&sub_id1=B450M+DS3H&sub_id2=CS&sub_id3=319
(Shopee link) = invol.co/cly4ad
RAM = HyperX Fury RGB 16GB 3200MHz DDR4 CL16 DIMM (Kit of 2) 1Rx8 RGB XMP Desktop Memory HX432C16FB3AK2/16
(Amazon link) = amzn.to/2NIVgi1
(Lazada link) = c.lazada.com.my/t/c.ZfZ6AH?url=https%3A%2F%2Fwww.lazada.com.my%2Fproducts%2Fkingston-hyperx-fury-rgb-8gb-ddr4-3200-mhz-cl16-gaming-ram-amakusa-i613494983-s1262384796.html&&sub_id1=3200+RGB&sub_id2=Amakusa&sub_id3=229
(Shopee link) = invol.co/clkhgg
SSD = Kingston KC600 512GB 2.5 Inch SATA3 Solid State Drive (3D TLC) Model: SKC600/512G
(Amazon link) = amzn.to/33gGTdk
(Lazada link) = c.lazada.com.my/t/c.0BE7l9?url=https%3A%2F%2Fwww.lazada.com.my%2Fproducts%2Fkingston-internal-ssd-2tb-1tb-512gb-256gb-kc600-internal-ssd-sata-3d-tlc-nand-solid-state-drive-skc600256g-skc600512g-skc6001024g-skc6002048g-i396168013-s1719562037.html&&sub_id1=kc600&sub_id2=mono&sub_id3=289
(Shopee link) = invol.co/clu0c7
Graphics Card = GIGABYTE AORUS GeForce GTX 1660 Ti 6G Graphics Card, 3X Windforce Fans, 6GB 192-bit GDDR6, Gv-N166TAORUS-6GD Video Card
(Amazon link) = amzn.to/2DOVuCC
(Lazada link) = c.lazada.com.my/t/c.bMycR1?url=https%3A%2F%2Fwww.lazada.com.my%2Fproducts%2Fgigabyte-gtx-1660-ti-gaming-oc-6gb-gddr6-graphic-card-gtx1660ti-1660ti-i463270747-s740784103.html&&sub_id1=1660ti&sub_id2=Asashi&sub_id3=1579
(Shopee link) = invol.co/cly4ej
Wifi = TP-Link WiFi 6 AX3000 PCIe WiFi Card for PC with Heat Sink| Bluetooth 5.0 | 802.11AX Dual Band Wireless Adapter with MU-MIMO, Ultra-Low Latency (Archer TX50E)
(Amazon link) = amzn.to/2DuK6eS
(Lazada link) = c.lazada.com.my/t/c.b6kMNB?url=https%3A%2F%2Fwww.lazada.com.my%2Fproducts%2Ftp-link-ax3000-wi-fi-6-bluetooth-50-pcie-adapter-archer-tx50e-free-pubg-bag-i1169126020-s3379272581.html&&sub_id1=AX3000&sub_id2=Mono&sub_id3=149
(Shopee link) = invol.co/clvwf5
Power Supply = COOLER MASTER ELITE P600 V3 230V PK600W POWER SUPPLY (MPW-6001-PCABN1)
(Amazon link) = amzn.to/2YKHnG2
(Lazada link) = c.lazada.com.my/t/c.Z6UZr0?url=https%3A%2F%2Fwww.lazada.com.my%2Fproducts%2Fcooler-master-elite-p600-v3-230v-pk600w-power-supply-mpw-6001-pcabn1-i1117960818-s3147116409.html&&sub_id1=Elite+P600&sub_id2=EIT&sub_id3=155
(Shopee link) = invol.co/clpt9d
Casing = Cooler Master MasterBox E500L ATX Casing
(Amazon link) = amzn.to/2ZNAqRQ
(Lazada link) = c.lazada.com.my/t/c.eFeu
(Shopee link) = invol.co/clhkyz
Aigo darkFlash CF8 Pro 3-In-1 RGB Chassis Fans with Controller [Motherboard 5v aRGB Supported]
(Amazon link) = amzn.to/3e3cr8o
(Lazada link) = c.lazada.com.my/t/c.be1T8j?url=https%3A%2F%2Fwww.lazada.com.my%2Fproducts%2Faigo-darkflash-cf8-pro-3in1-rgb-chassis-fans-with-controller-motherboard-5v-argb-supported-i586874856-s1180650469.html&&sub_id1=CF8+PRO&sub_id2=Raydeeyo&sub_id3=95
(Shopee link) = invol.co/clv0jb
Price is based in local Malaysia current price.
PC Tool Kit, Jakemy Ratchet Repair Screwdriver Set, Torx screwdriver 20 in 1 for iPhone X, iPhone 8/8 Plus/7/7 Plus/6/6 Plus/6S/5/5C/5S/4/4S/iPad 4/3/2/Mini, Laptop
(Amazon link) = amzn.to/3bCMrjM
Please SUBSCRIBE & Click the BELL NOTIFICATION button:
ruclips.net/user/KLGamers
Thanks for all your Support, LIKE the video, Sharing the video and leaving a comment is always appreciated!!
Copyright © KL Gamers 2019. All Rights Reserved.
DISCLAIMER: This video and description contains affiliate links
@@KLGamers Hi thank you for the response! but what I would like to say is that, if you can add the total expenses like if it's a 700$, 800$ or 1000$ pc.. or in your case in RM.. Sorry if it looks like that I am lazy to check the prices of each parts one by one but it gives us, viewers, a very quick idea how much was spent on every build. Thanks once again!
Why u didnt clean the cpu with ipa before aio installation?
Please make a video of installing windows and formatting of drives after PC build
Hey! My cooler is going to have 4 pins. And the "cpu_fan" connector just have 3, any thing that u can help me?
Good luck in all your endeavors bro👋👍
Thanks, you too!
Hey question did u need to do a bios update or it was compatible from out box. Also if u can. Cam u tell me how i can find out if something needs a bios update before I get it.
salve un informazione potresti dirmi quale scheda video compatibile con scheda madre B450M-DS3H sotto i 150 euro per windows 11? Grazie.
Nice!
I would like to see a build with Cooler Master NR200 case, with a cheap mATX motherboard! What about you?
Maybe in future
Are there any other budget am4 motherboard that supports the liquid cooling fan?
Hi! Where did you plug in the pump for the aio?
direct to power supply
And now all air bubbles are stuck in the cooling pump. Providing less cooling and weird noises
Won’t the air get trapped in the pump cause the radiator is below the pump
it's ok
@KL Gamers thanks for your reply cause I have the same setup and mine hangs pretty low under the pump but I haven’t had any trouble with it
Why bother putting an AIO to a 65W cpu then running on one stick of ram?
Actually its 95
Schickes Video, ähnlicher Content wie bei mir :)
Mach weiter sooo
Where did u get the bracket from I need just the bracket
AM4 brackets
Nice bro i watch every day ur new videos
Thank you so much 😀
I have ryzen 5 2600 is it compatible with
Gigabyte b450m s2h ultra gaming.
Kindly reply i am not sure wether it will work
yes work, and need a graphics card
@@KLGamers without that will it work because i am getting no vgi input
No signal
Is it fine if i buy a gpu
@@sectumtharun6009 no vgi input becuz ryzen 5 2600 is not an APU. you need a graphics card or it won't work.
@@shinmosuela8812 thanks for the reply
What’s the purpose of putting an AIO cooler that costs more than motherboard in a 65 watt CPU that would be more than fine on the stock cooler?
looks cool 😎👍
Did you have to turn on xmp in the bios for the ram to be compatible with the cpu?
yes you have to turn on XMP profile
Hello , are the screws inclueded with the watercooling ?
yes
Have you ever buildt a computet before?!?!?😣
Why?
@@aureliendaniel6507 He used one stick of ram. That's a noob mistake. Some games single channel will tank performance. Always use two sticks.
i just bought the same motherboard and cpu but the cpu wont fit. any suggestions or tips? what other cpu would be good for gaming on this motherboard? that will fit
won't fit? maybe turn the processor 90 degree ?
I always love to watch your chanel
one of the best things I like in your PCs assambly: the case :D mid and full towers are Nice!
Glad you like them!
which motherboard and graphicscard is best for ryzen 5 3600
Dude ,but why?ryzen 2600 not so hot.i think watercooling system is to much
yes very cool
So many people commenting on the single channel ram but doing it like this instead of 2 8gb sticks is that down the line you can upgrade all the way up to 64 gigs without having to replace the whole set
yes that is correct
where did you plug in the AIO pump?
can plug in to cpu fan or use converter to plug in to power supply
hey bro, i have a ds3h v2. is this compatible where do i plug in the rgb, pump and fan headers? would rlly mean alot if u respond bro
If I already something plugged into the white plug on the bottom right of the motherboard does it matter if I also plug in the ones from the water cooler rite next to them? I’m sorry I just got my computer 2 days ago
no idea
Where do you put the rgb header of the case fans?
chill guys theres no problem with not having dual channels.. you can add one later.. 😊
But you have to spend more money. When you could have just bought a 2x8 kit
In this vedio kindly tell me the name ho 2nd background music...kindly I eager to listen it if u mind telling me name ??
What ports did you plug the AIO in
Beautiful video but soundtrack is very beautiful 👌
Thank you very much!
Bro you got to get some cable extensions or something. Will make a huge difference. Good job tho.
I have to update the bios for this r5 2600 or not? In future can i put the r5 3600 or i have to change mb?
no need update BIOS
@@KLGamers thank u!
Como se llama el cable o adaptador q utilizo para conectar la bomba a la fuente? 😊
where your shop in Malaysia?
Bro try some liquid cooling pc builds or intel special x series pc builds pls pls pls ❤️
expensive
@@KLGamers ok not liquid cooling but pls pls pls intel x series one pls pls
i happen to like that motherboard model i've been trying to recommend it for the third gen ryzen cpus so that people wouldn't have to pay so much for a decent build to work, but i'm not sure if it will work with them out the box without a bios update, i know for a fact it works with the second gen chips though. nice build by the way, you see people? this is how its done we don't need a whole bunch of rgb lighting or a whole bunch of fans for a build to look good that stuff is for the crazy enthusiasts, for most people these parts are just fine.
zulu67 ryzen 3000 works out of the box with the gigabyte b450 ds3h
hello can you teach me how to disable c states on a b450m motherboard? one of my friends have a lot of input lag in games
not sure
Good job on the video and a nice build.
Thanks 👍
The only thing that ketchup n mustard colour wires from the power supply spoil the built
Why always choose untidy cases ?
Is it necessary to put thermal paste before before installing cpu cooler?
depends, most are pre-applied
Where did u connected the watercooling?
to the power supply or the motherboard
@@KLGamers Man it is CPU FAN, Not Water Pomp
Ну не знаю лучше башенку для проца взял вместо водянки , а за эти деньги можно было взять 2 каннал или мать по пизже
I don't have enough money to buy this. Why am I watching this? :)
Hhhh same
Can I Know that cable U used for connecting cpu cooler directly to PSU, and were acanI get that or is that a necessary one ?
molex to 3 pin / 4pin fan connector
Positioning the liquid cooler in that way is an incorrect method, reducing product life and causing performance loss.
Please pick a case for your customer that has PSU cover to hide the cable
Can I plug to the rgb led header so I can control the color with the program?
this cooler only have white LED
Why not use 8x2 3200mhz ram instead of 1 16gb of ram?
more expensive
KL Gamers you get 35-50% more performance for a marginally low price, wtf is your priorities? you use a last gen ryzen cpu and single channel ram and you blow all your money on water cooling and still say more expensive lol.
Kenny X his country might have different prices
May I know my computer build is good enough?
MSI A320-M Pro Matx
SSD 500GB
RAM 8GB 3200mhz
AMD Ryzen 5 2600
Aigo GP650W 80plus Brown
u have a build with the same motherboard and cpu and im thinking of getting the same aio this is sick
How much does the set cost?
Would this motherboard work with the I’d cooling pink flow cooler
should be
@@KLGamers thankyou👑
My PC same specs what a coincidence 😉
Superb video 👌🔥.
Just one thing, be careful with that method of application of thermal paste. It can causes bubbles 👀 and then overheating.
Another thing is, that ram module should be installed in the second slot (left to right) to best performance. Check out the manual 👀
Regards! 🙏
Thanks for the tip
Can you tell me something please
My motherboard is gigabyte b550m ds3h so it doesn't have an aio pump where should I plug my aios plug then? Please tell
@@manjudevi9542 Just connect the AIO pump in the fan port of the CPU. Let the main fan port control that like a conventional cooler.
And the fans, connect them in the other fan ports
You should be save 🙂
@@yousportshd6058 thank you so much❤
is the rgb in aio not working?
Is this mid tower case size?
yes 👍