I always install mud flaps, they save your truck sides. Watched the video to see what changes were made. New flaps are in the garage for 2024 F350. Thanks for the video.
I turned 60 today, so I'm going home and install my new OEM mudflaps on my '19 F250 Platinum! Those instructions suck, so thanks for clearing up a few vague areas. Got to rock the old man vibe!!
"JC Whitney-fy my truck" - That comment made me choke on my drink! I was a regular JC Whitney catalog user back in the late 70's and early 80's, when money was tight and there was no internet.
Thank you so much for the video. The new 2024 mudflaps don't come with instructions, they just point you at the Ford website with all of the different instructions for all of the add-on options. Unfortunately, the ones online are horrible and didn't even match the mudflaps I received. Your video saved me and made it a simple install. Thank you.
I just put a set on my 2018 f250 last night. I should have watched this video the day before installing them! There's nothing like putting the cart in front of the horses! Like you, I think they'll be sufficient!
Even if it is an old one it is still good. Just a couple of changes. there is plastic pieces that are stick on (in my kit at least) and two there are push pins and I don't like those as well, but I did something a little different. Still good though.
Just did get my 2020 Lariat F-350 this Monday. it already had those from the factory I guess .Or dealer installed. Thanks again for all of your no nonsense information.
Hey those look better than the ones on my 2013 S.D. They are longer and stop the mud from getting on the lower fenders. Also stops stone chips. I also like the brackets for the rears. Stopscthem from resonating at speed. Also keeps them off exhaust top!!! 👍👍👍
Nice truck , I have the 2017 king ranch f350 and I put the gatorback with the ford log0 up front and the f-350 logo in the back. I'm from Ontario and with the snow and salt you need all the protection you can get and I find they look real good on the truck.
I put Husky Liner mud flaps on mine. I needed something to protect the Ruby Red paint from the rocks that fling out of my tires when I get my travel trailer out of storage. Seems like that road base rock likes to live in the tread until you get 30-40 mph then reek havoc on your rocker panel paint. I was worried about the looks of the mud flaps too, but now I'm used to it and most people don't notice it.
Hello ARod, I have the exact Mud Flaps on my 2018 F350. They work great and are very functional. Nice Job on the installation. I hope you enjoy them. D. 👍🇺🇸
Wish I had found this first. Ford parts found on line even with using VIN number they sent me generic ones that need lot of drilling of holes. Mine is a 2018 F250 6.2l and the the part numbers you showed should be a identical fit. And no clear images of what happens to the factory guards that are installed. Will be sending them back for these, they actually are just plug and play, no drilling. So much for VIN for perfect fit on these on line sales...!!! sigh....
Got a 2022 and will be heading 2 granite ford tomorrow in Rochester NH and ordering them then I'm going 2 do some modifications myself and cut down my yosemite sam flaps that turned out useless and pop rivet them on to the oem ford ones hope it turns out ok
I bet you're wife is jealous of all the attention to truck is getting. But it's ok cause we get more content. Thanks for sharing Arod, I'm digging the truck man
I have a 2020 F250XL model truck and am upgrading almost everything I can. I put Weather Tech mud flaps on the front but need rear mud flaps. How much do the OEM rear mud flaps cost? The rear Weather Tech mud flaps cost 45-ish to 48 bucks. Weather Tech sent me the incorrect rear mud flaps so I don't desire to deal with them again. I upgraded the standard 4 inch infotainment screen to an 8 inch screen and also installed a GPS Nav system which my XL did not have and it's so sweet. I didn't make a video of installing the 4" to 8" conversion but it turned out fine.
As a 60 plus old man :) I have s 21 F250 Carbonized gray blacked out lariat edition. I am customizing it with a few accessories. I have Bushwhacker pocket rivet flares painted black. I am getting rock damage from my gravel road on my painted rear bumper UGH!!! I am looking for mud flaps that don't look dorky. The bushwhacker flaps are ugly in my opinion. so now I am looking for some other type of protection. Mud flaps have to look cool or your right it looks like a grandpa truck. I can't put any on the front due to my tires rubbing now. But I need some protection for the back. BTW ford flaps are better than most, but they all take a bit of getting used to. I like um, but again I am over 60! Some of us like tricked out trucks. I just got my hood scoop going to get it painted next. love your shorts and the pod casts, and other vids. keep up the good work.
Down the road when you get new tires that are maybe wider, you will be glad that these flaps are wide and able to get most of the over spray of the tire.
So I just installed these today. Ford has changed them again. The fronts are long and take a 3rd bolt now. The fronts have an outline of the old design so I believe they are able to be cut shorter no problem. Also with the rears if you have factory wheel well liners then you need to cut a 1x1 square out of the bottom inside of the liner so you can clip the flap in. Tin snips are awesome for cutting plastic.
Nice 👍🏻 . I like them. Don’t let the haters shame you for having a sweet stock truck and not having a 99 Cummins or Ford worth 2 thousand dollars with a 12 inch lift and 40 inch tires and a sticker on the back window rolling black smoke all over the highway.
My fronts folded back and broke, right where you pointed at the hole , that rectangular section.Put Dura Flaps on, heavy duty, just like the Super Duty.
Great job brother!! It does stick out a bit as you mentioned - no biggie. I will say this - I probably won’t put these on my ‘19. PS - love the work platform! 😬😬 Alright, now I gotta was my truck - yours cleaner. Lol lol
I think the 'C' part is just tape that you wrap around the rod. I think that's what you had if you removed it from the paper backing. At least that's how they factory installed ones were on my Tremor... although mine are slightly different. PS: here in Alberta my understanding is that mud flaps are required by law which I know people complain about as the manufacturers sell them without.
I strongly feel that mudflaps help protect the body. I hate to be a dick, but I feel my weathertechs look far better, fit better and are nicely secured. They are a touch shorter and really blend in to the body lines, they look more factory than the factory.
Never had mudflaps on a vehicle before but they came with my SD so i'm rocking em... Never seen tire shine like that before. Early in the video I thought that you were in an area where there is a lot of pollen. 🤔
ARod! Love the vids! 2020 has been an interesting year for sure. Do you know how many less 2020 superduty trucks were produced due to the shutdown? I ordered my 2020 F350 with 4 days left before the transition to 2021. Super excited to get it!
Going to put them on my 2020 350 DRW when it comes in. I don't like to dirt on the step rails. It causes the floor to get dirty. Also hoping to keep rock chips at bay on the dually finders.
I have the WeatherTech mud flaps on mine & have had them on since about day one of ownership. Not really impressed with now short they are & they aren’t any longer then the factory one.
Naw, the ‘flaps are to keep the rocks from the new stylin’ rims that have way too much offset. You know those that are THE style of the day 🤮. A knows better than to do those.
Do mud flaps help from throwing mud under the bed of my truck? It takes forever to pressure wash the underside of my bed especially the front half, because it has no barrier! its messy washing the under belly! i get mud all over me trying to clean it! But I Sacrifice to keep the truck safe from erosion! just sayin
I got my Duty Saturday. 3 tech were fighting over it. They printed my build sheet. Let the mods begin. Tint the front door glass first. I've had Ford mud flaps on every vehicle I ever owned. I'm over 60 What of it BRO?
And is that tire shine only look like that through the camera or does it look like that anytime a light hits it?? I’ve never seen that before and mcguires is the best!
Installed on my 2020. The mud goes through the seem and over on to the back of them. Didn't have that issue with the ones installed on my 2015 and 2018.
SHOULD’VE gone with the WeatherTech mud flaps imo they look a lot better. My trucks too damn high with tires way too big for mud flaps to have any effect!! Also, upgrade to Ampd PowerSteps! SICK!!! Plus when you get out your SuperDuty at night the entire underneath glows from the LED’s that come with the steps. The running boards you’ve got look good, but you get added clearance with the powersteps. Like I’m tellin you anything, you’ve replaced the back motors on a few. Which reminds me, maybe not too good up there with all the salt spray and ish in the winter months. Not enough here in tha south to worry about.
Just bought a 23 350 7.3 gasser. I’m putting mine on tomorrow. I don’t think they look to bad. My last 250 took a beating so I’m just going to get used to it
Lemmie put it this way.....when i heard cp4 from these people on the net...smh i duno what tha fak ur talkin about. No where do we have info callin it that. Lmaooo only the net warriors lingo. Ill have u know, for a FACT these CP4s or what ever the hell theyre called just do not clock out and fail. No sir, something called the pump on the celly & said hey buddy ur gonna die in 3..2..1....& now ur on the side of the road smFh.....ahhh geee i guess i shouldnt have gotten fuel at this random mom and pop stop.........
When we look up parts at the dealer, it doesnt say who makes the parts. Like if your were to look up axle parts it might say like Dana 60 or a Spicer....when we look up engine stuff....its says....short block assembly. Doesn't say who made it. Look up a 9A543 it shows a picture of a high pressure fuel pump. Doesnt say anything about it being bosch or cp4....none of that. Maybe in a different application like gm they r called that but from 11 to CMY at the dealer.....if u went to parts & asked for that theyd prolly look at you stupid...
That video was a while ago I have left them on they help reduce the stuff getting sprayed up on the side of the truck tremendously they have grown on me
I always install mud flaps, they save your truck sides. Watched the video to see what changes were made. New flaps are in the garage for 2024 F350. Thanks for the video.
Nice job!
I turned 60 today, so I'm going home and install my new OEM mudflaps on my '19 F250 Platinum! Those instructions suck, so thanks for clearing up a few vague areas. Got to rock the old man vibe!!
I'm 63...Agree with you. Mines a 2023 Lariat 7.3❤
"JC Whitney-fy my truck" - That comment made me choke on my drink! I was a regular JC Whitney catalog user back in the late 70's and early 80's, when money was tight and there was no internet.
Hahahahahahah
Thank you so much for the video. The new 2024 mudflaps don't come with instructions, they just point you at the Ford website with all of the different instructions for all of the add-on options. Unfortunately, the ones online are horrible and didn't even match the mudflaps I received. Your video saved me and made it a simple install. Thank you.
Glad the help pal
I just put a set on my 2018 f250 last night. I should have watched this video the day before installing them! There's nothing like putting the cart in front of the horses! Like you, I think they'll be sufficient!
Good vid. I just got back from a trip and my steps and side of my truck were covered with muddy water splash. I’ll be adding these asap.
Even if it is an old one it is still good. Just a couple of changes. there is plastic pieces that are stick on (in my kit at least) and two there are push pins and I don't like those as well, but I did something a little different. Still good though.
Just did get my 2020 Lariat F-350 this Monday. it already had those from the factory I guess .Or dealer installed. Thanks again for all of your no nonsense information.
Thank you for your response...much appreciated. See you tomorrow night!😉
I thought mine looked goofy also but after driving in the rain. I like them, less dirt and sling on sides. Looks good AROD 👍 👌
Thanks for posting the link in the description. Helped allot.
I appreciate that Mr. Viper. I like the color...
Never been a fan of mud flaps, but understand wanting to protect that sweet blk paint, especially in the snow belt.
Hey those look better than the ones on my 2013 S.D. They are longer and stop the mud from getting on the lower fenders. Also stops stone chips. I also like the brackets for the rears. Stopscthem from resonating at speed. Also keeps them off exhaust top!!! 👍👍👍
Looks good, thanks for posting
I like them. Nice job. Just bought them for mine.
Nice truck , I have the 2017 king ranch f350 and I put the gatorback with the ford log0 up front and the f-350 logo in the back. I'm from Ontario and with the snow and salt you need all the protection you can get and I find they look real good on the truck.
I put Husky Liner mud flaps on mine. I needed something to protect the Ruby Red paint from the rocks that fling out of my tires when I get my travel trailer out of storage. Seems like that road base rock likes to live in the tread until you get 30-40 mph then reek havoc on your rocker panel paint. I was worried about the looks of the mud flaps too, but now I'm used to it and most people don't notice it.
Hello ARod, I have the exact Mud Flaps on my 2018 F350. They work great and are very functional. Nice Job on the installation. I hope you enjoy them. D. 👍🇺🇸
Thanks Doug
Thanks man. I’m installing mine tomorrow. The dealership wanted $300 for them installed, i ordered them off eBay for $100.
Wish I had found this first. Ford parts found on line even with using VIN number they sent me generic ones that need lot of drilling of holes.
Mine is a 2018 F250 6.2l and the the part numbers you showed should be a identical fit.
And no clear images of what happens to the factory guards that are installed.
Will be sending them back for these, they actually are just plug and play, no drilling.
So much for VIN for perfect fit on these on line sales...!!! sigh....
Got a 2022 and will be heading 2 granite ford tomorrow in Rochester NH and ordering them then I'm going 2 do some modifications myself and cut down my yosemite sam flaps that turned out useless and pop rivet them on to the oem ford ones hope it turns out ok
I bet you're wife is jealous of all the attention to truck is getting.
But it's ok cause we get more content. Thanks for sharing Arod, I'm digging the truck man
😭😭😭😭😭😭👍💯💯
60+ Old man here , they do keep the rock chips off your body!!
Lolol
I'm 63..Thumbs up on OEM.❤
I have a 2020 F250XL model truck and am upgrading almost everything I can. I put Weather Tech mud flaps on the front but need rear mud flaps. How much do the OEM rear mud flaps cost? The rear Weather Tech mud flaps cost 45-ish to 48 bucks. Weather Tech sent me the incorrect rear mud flaps so I don't desire to deal with them again. I upgraded the standard 4 inch infotainment screen to an 8 inch screen and also installed a GPS Nav system which my XL did not have and it's so sweet. I didn't make a video of installing the 4" to 8" conversion but it turned out fine.
As a 60 plus old man :) I have s 21 F250 Carbonized gray blacked out lariat edition. I am customizing it with a few accessories. I have Bushwhacker pocket rivet flares painted black. I am getting rock damage from my gravel road on my painted rear bumper UGH!!! I am looking for mud flaps that don't look dorky. The bushwhacker flaps are ugly in my opinion. so now I am looking for some other type of protection. Mud flaps have to look cool or your right it looks like a grandpa truck. I can't put any on the front due to my tires rubbing now. But I need some protection for the back. BTW ford flaps are better than most, but they all take a bit of getting used to. I like um, but again I am over 60! Some of us like tricked out trucks. I just got my hood scoop going to get it painted next. love your shorts and the pod casts, and other vids. keep up the good work.
Thanks brotha
Hey wait a minute I'm 60 ! Anyway, I like them. Keeps my pipes from getting plastered with mud cake.
I put the Huskys on mine. Any mudflap is better than nothing. As long as you're over 60 y.o.
Lol J/K
Lmaooooo
Down the road when you get new tires that are maybe wider, you will be glad that these flaps are wide and able to get most of the over spray of the tire.
Yes. 37”x12.50s will need every bit off that mud flap.
Nice truck.
So I just installed these today. Ford has changed them again. The fronts are long and take a 3rd bolt now. The fronts have an outline of the old design so I believe they are able to be cut shorter no problem. Also with the rears if you have factory wheel well liners then you need to cut a 1x1 square out of the bottom inside of the liner so you can clip the flap in. Tin snips are awesome for cutting plastic.
I have rears. In my video i didnt trim diddly
Looks good and it will protect as well.
Aye yo C....i told you; give her the test, then & only then will u know
Nice 👍🏻 . I like them. Don’t let the haters shame you for having a sweet stock truck and not having a 99 Cummins or Ford worth 2 thousand dollars with a 12 inch lift and 40 inch tires and a sticker on the back window rolling black smoke all over the highway.
My fronts folded back and broke, right where you pointed at the hole , that rectangular section.Put Dura Flaps on, heavy duty, just like the Super Duty.
Duraflap was my choice for my 17 350 and my 04 250. Enjoyed both sets, super duty!
Great job brother!! It does stick out a bit as you mentioned - no biggie. I will say this - I probably won’t put these on my ‘19.
PS - love the work platform! 😬😬
Alright, now I gotta was my truck - yours cleaner. Lol lol
🤣👍👍💯
I think the 'C' part is just tape that you wrap around the rod. I think that's what you had if you removed it from the paper backing. At least that's how they factory installed ones were on my Tremor... although mine are slightly different.
PS: here in Alberta my understanding is that mud flaps are required by law which I know people complain about as the manufacturers sell them without.
Mike is exactly right! I noticed it peeled apart and had a sticky back when installing mine. Still a very helpful vid!
Hmmm, may just do the ‘rears’ just to protect the sweet pipe tips! 😎
If you live in the north where the DOT treats the roads with salt and brine all winter , your fenders will be thanking you for putting the mudflaps on
Have you ever installed the Ford factory power boards on a 2022 lariat superduty that had just the standard boards or the black edition boards?
NEW SUBCRIBER
I think OEM looks the best.❤
I strongly feel that mudflaps help protect the body.
I hate to be a dick, but I feel my weathertechs look far better, fit better and are nicely secured.
They are a touch shorter and really blend in to the body lines, they look more factory than the factory.
Never had mudflaps on a vehicle before but they came with my SD so i'm rocking em... Never seen tire shine like that before. Early in the video I thought that you were in an area where there is a lot of pollen. 🤔
Hahahahahaha, thanks 4 watchin
I had factory flaps on my 16 duty and the wore thru the paint. Went with huskey flaps and feel they cover better.
Interesting
I went with pro tech fronts helps a lot with rock chips
ARod! Love the vids! 2020 has been an interesting year for sure. Do you know how many less 2020 superduty trucks were produced due to the shutdown? I ordered my 2020 F350 with 4 days left before the transition to 2021. Super excited to get it!
I dont, but that awesome 2 hear. I was excited tooooo. Still am!! Let me if i can help ya out 😉
Hmmmmm. Defiantly changed the look didn't it. Should keep the step bars clean,so you're not tracking stuff in the truck too
1080p60 That’s the 6.7L of RUclips quality right there 🇺🇸🇺🇸🇺🇸👍👍👍👍
Fug yea bruh!!!!
Going to put them on my 2020 350 DRW when it comes in. I don't like to dirt on the step rails. It causes the floor to get dirty. Also hoping to keep rock chips at bay on the dually finders.
👍👍
What do you guys think about gator back mud flaps?
I have the WeatherTech mud flaps on mine & have had them on since about day one of ownership. Not really impressed with now short they are & they aren’t any longer then the factory one.
In my opinion, if you trimmed off the bottom third of the flaps they would look better. Probably reduce the functionality of them though.
Makes you look very matur .. I have them on my super duty. Makes you look as if an older man owns the truck 😉
😭😭
🤣🤣🤣🤣🤣🤣😭😭😭😭😭😭😭😭😭😭
Naw, the ‘flaps are to keep the rocks from the new stylin’ rims that have way too much offset. You know those that are THE style of the day 🤮. A knows better than to do those.
Omg never....🤭😬👎
@@PowerStrokeTechTalkwARod good for front hub sales which is good for front hub $eal sales too
Do mud flaps help from throwing mud under the bed of my truck? It takes forever to pressure wash the underside of my bed especially the front half, because it has no barrier! its messy washing the under belly! i get mud all over me trying to clean it! But I Sacrifice to keep the truck safe from erosion! just sayin
I have found it does keep the splashes from up therr
I got my Duty Saturday. 3 tech were fighting over it. They printed my build sheet. Let the mods begin. Tint the front door glass first. I've had Ford mud flaps on every vehicle I ever owned. I'm over 60 What of it BRO?
🤣🤣🤣🤣🤣👍👍👍👍👍
I like . I hate when dirt and mud gets thrown up on the step. Then mud and dirt get in the vehicle when you step in.
And is that tire shine only look like that through the camera or does it look like that anytime a light hits it?? I’ve never seen that before and mcguires is the best!
Only with the flash on hahahah
PowerStroke Tech Talk w/ARod good! That would’ve been an entirely different video then! 😂
Installed on my 2020. The mud goes through the seem and over on to the back of them. Didn't have that issue with the ones installed on my 2015 and 2018.
Ok well see. Mine have been gee so far
Agree, I nominate you as the US SuperDuty Ambassador. Lemme petition Mr Trump
A waiting.......!
Arggg .. Nancy, chuck, and da squad putting up speed bumps. You may need to drive me over there in the new 3 fiddy
Im comin' over, we're bussin' thru dis shizzzzz
I"m not a fan of mud flaps, but you definitely need them. OE quality looks pretty good for the most part.
Hey its the chicken coop guy 🙋♂️🙋♂️🙋♂️🙋♂️
@@PowerStrokeTechTalkwARod Damn chickens have been making me mad these past few days... Getting in the way of yard work!
What's that I see? A Matco air ratchet? Where's the best? Milwaukee
Rocking mud flaps up in Alaska.....
Woowoooo
How did I miss this video....faaak. I ended up buying husky mud guards
PSA 2 years into my OE front mud flaps and both are torn greater than 50%. I otherwise love my SD.
Not a fan of those mud flaps, not really digging them .. 🧐... but hey! They are doing their job 👍🏼🇺🇸
mudflaps must be a mid-west, north-east thing. Probably for the salted roads? We do not see many mudflaps out west.
Yeeeeeehaw
@@PowerStrokeTechTalkwARod hahahahahahah. The wild west!
Do you still have them on. I put them on in December. Lost left rear first snow storm.
2yrs strong here
SHOULD’VE gone with the WeatherTech mud flaps imo they look a lot better. My trucks too damn high with tires way too big for mud flaps to have any effect!! Also, upgrade to Ampd PowerSteps! SICK!!! Plus when you get out your SuperDuty at night the entire underneath glows from the LED’s that come with the steps. The running boards you’ve got look good, but you get added clearance with the powersteps. Like I’m tellin you anything, you’ve replaced the back motors on a few. Which reminds me, maybe not too good up there with all the salt spray and ish in the winter months. Not enough here in tha south to worry about.
Lol great thanks 4 sharing...
@Si Vis Pacem Para Bellum OEM only sir. No Pepboys or JC Whitney bull$hit on this channel
tctwg1 weathertech aint “jc Whitney bullshit”. Sometimes Oem isn’t the best available.
tctwg1 neither are AMPD powersteps.
And Ford installs them on new ford vehicles.
Do you have the part number for the fronts and rears, I couldn't get them off of the video. Thanks
I dont. Ull have 2 pause it
let's get a video of the new warn winch install on a super duty.
When i get a customer who wants 1 will do a video
Just got some for my f250 2021? Not on yet
Just bought a 23 350 7.3 gasser. I’m putting mine on tomorrow. I don’t think they look to bad. My last 250 took a beating so I’m just going to get used to it
I REALLY want one of these new 6.7s but I just can't bring myself to only keep it for the 5 years the warranty is good for
Thats why u keep it cuz they the best. Its those who dont take care of em r the ones bitch & carrying on n what not...
@@PowerStrokeTechTalkwARod would you say the CP4 is even remotely close to as big a problem as youtube and the forums make it out to be?
Lemmie put it this way.....when i heard cp4 from these people on the net...smh i duno what tha fak ur talkin about. No where do we have info callin it that. Lmaooo only the net warriors lingo. Ill have u know, for a FACT these CP4s or what ever the hell theyre called just do not clock out and fail. No sir, something called the pump on the celly & said hey buddy ur gonna die in 3..2..1....& now ur on the side of the road smFh.....ahhh geee i guess i shouldnt have gotten fuel at this random mom and pop stop.........
@@PowerStrokeTechTalkwARod I'm confused what it's called then, because is it not a Bosch CP4 pump?
When we look up parts at the dealer, it doesnt say who makes the parts. Like if your were to look up axle parts it might say like Dana 60 or a Spicer....when we look up engine stuff....its says....short block assembly. Doesn't say who made it. Look up a 9A543 it shows a picture of a high pressure fuel pump. Doesnt say anything about it being bosch or cp4....none of that. Maybe in a different application like gm they r called that but from 11 to CMY at the dealer.....if u went to parts & asked for that theyd prolly look at you stupid...
Good video you’re right they don’t look that great they do stick out too far I just got done putting them on my 2017 platinum and I don’t like them
That video was a while ago I have left them on they help reduce the stuff getting sprayed up on the side of the truck tremendously they have grown on me
Are you sure that was not a piece of clear decal tape
I tried peelin it apart & it didnt come apart!
I worked with a tech that couldnt install mudflaps or a headlight without swearing.
😬😬😬😬🤷♂️
These are the "NO SWEAR KIND" No drillin!!
Damn st8
What brand is the hitch?
Weigh safe. Watch my mod playlist!
Dam!
Get yourself a rhino hitch!
Pssssssh
PowerStroke Tech Talk w/ARod It’d look so much more badass! And those hitches are amazing.
$70.000 truck it needs mud flaps to protect the paint from rocks
Mud flaps if your going to use it in winter! Don't have to be 60 to have common sense .
😭😭
Yeah, mine came with instructions allright. Not sure which language it was in?? Probly where the truck was built.
Lol
WTF has a "5.5 milly" thot the truck was made in the usa??
most every vehicle made, has them and 10 millies all over.....
May be why HF sells 10 mm socket sets, the new 9/16 of the old days....lol