Hoyt VS Mathews

Hoyt Alpha X, Hoyt Carbon RX-8 Ultra, Mathews Lift 29, Mathews Lift 33 reviews. In this video I review the Hoyt Alpha x along with the RX-8 Ultra, and the Mathews Lift series. I used the TRU Ball short n sweet release viewable with this affiliate link - amzn.to/3uotEan

[@letshred9479]

Good vid Sean, the rubberish piece on the cam of the Hoyt isn’t about speed, it’s for the cam to sit on it when using a bow stand.. my alpha x33 is on the way!

[@seansoutdoors]

Enjoy it

[@anthonysimone7232]

Nailed it on the explanation of the piece on the cam. It’s to keep the string from touching the ground

[@bob-zw9wj]

Thanks for doing these reviews on the bows I always look forward to them

[@seansoutdoors]

thanks!

[@Voxguitarsrock]

Good rundown. Thanks.
I'm still happy with my Bear Cruzer.

[@seansoutdoors]

👍

[@mammydammy]

Great introduction to hoyt and mathews new bows.👍

[@seansoutdoors]

👍

[@poppasmurf15]

The audio without hearing the bow go off is so bizarre…great vids as always regardless though sean❤

[@seansoutdoors]

Yeah the filter I had to put on to dampen all the reverb from the room silenced the bow and target noise.

[@anthonysimone7232]

sean you hit it in the head with the Mathew’s ibo rating….. these two bows are amazing and speeds are basically the same. Nice review

[@seansoutdoors]

Thanks!

[@MrRourk]

Add Elite to the next video:)
I like the shots with no fetching.

[@seansoutdoors]

👍

[@brockpeck7073]

Hoyt says the nub on the cam is for there bipod legs. To set the bow down on the ground and the cam not be in the dirt.

[@seansoutdoors]

Interesting

[@seansoutdoors]

If that were the actual reason for the nub, then why put it on the top cam too hahaha

[@troycox8062]

The cams would be unbalanced if the nub wasn’t on both cams.

[@bigz5262]

⁠@@seansoutdoors balance probably. But also the top cam would probably get swapped to the bottom on a left handed bow

[@seansoutdoors]

Right, so it is a balance detail moreso than a kickstand otherwise the top wouldn't need it if balance was not related to it. When they looked at it, they were probably like, how do we sell people on this? Ummm, how about we tell them it is to keep the string out of the dirt? Sounds good, lets roll with that. I've been in some really sloppy 3D shoots where that would not keep the string out of the mud if you stood your bow up. Anyway, I'm just saying it certainly looks like the function has more to do with speed and balance than in resting the bow on when it is not in use.

[@joncox2682]

Brother I love my phase 4 is the lift that much better in your opinion

[@seansoutdoors]

No, I would not say it is a dramatic improvement. They are all nice bows though.

[@monicar6963]

I like my Mathews V3X

[@seansoutdoors]

They are very nice bows

[@Oleman72]

PSE has the same feel at the back a hump thing

[@seansoutdoors]

Thanks for sharing

[@dewetrobertson1752]

Mathews draw length is quarter inch long

[@seansoutdoors]

Yeah they always tend to measure a quarter to a half inch longer than advertised

[@petermorphett]

whats with the sound being clipped on the shot on the bows?

[@seansoutdoors]

As I mentioned in the video, the echo and reverb was so bad in the footage that I put a filter on the audio to try to make it more manageable. A side effect was dampening of the sound at the shot

[@kain4645]

I don’t like how the Hoyt starts out harder for the first few inches

[@seansoutdoors]

👍

[@michaelmangino9819]

#HOYT

[@seansoutdoors]

👍

[@Fisherman_1992]

Thats alot of bows you shot did you get to test them for free or was there a price you had to pay for shooting all those bows

[@seansoutdoors]

No charge to test them

[@nuffsaid6807]

I'm seeing a PSE riser with that Matthew's. Just my opinion.
Tru-ball release for the win!!🎉

[@seansoutdoors]

👍

[@colindakers113]

You must be blind