Thank you for posting this video. I was able to replace my armrest with no problems and it wouldn't haven been possible without your instructional help. Thanks again!
Great video as I have a 2009 Honda Accord with a black interior and I think I'm going to have to remove the door panel in order to get the elbow cushion replaced. I live up in Canada so this is going to have to wait a few weeks till it gets warmer
Those lever connectors don't require 2 hands at all. Just stick a flathead under the lever (pressing on the clip) and twist to open the lever. I love these Honda clips, they are so well engineered.
Great Video, But do you have to remove the panel to replace the window switch all the other model that i look at show from the top piece you can take it off.
Mi auto es un Honda Accord 2012 el vidrio de la ventana se quedó abajo ya no quiso subir usted sabe cuál es el cable del botón para subir el vidrio del lado del piloto?? si no creo creo que subirá el vidrio manualmente quitando todo
I am trying to replace the master switch and i am not sure if the handle pops open or if i have to open the entire panel to replace the master switch any guidence will be appreciated. I have a 2008 Ex-L accord Thanks
Yes, you can get the panel off with the door closed. It's much more difficult and you are more likely to breaking something. Remove all the screws then start pulling on their bottom any way you can. You may have to get creative. Good luck!
@@DIYHonda thank you. This all started when a friend took the off to replace the drivers door window switch, cool. Whent to drive car home and couldn't get into vehicle, been having to get in from the passengers side..I'm wondering why...
Check to make sure clips were not left in your actual door. Also check and see if any clips on the door panel are partially pulled out or sitting sideways.
At 5:38 theres that one screw between the two black prongs holding the metal piece in place. When I removed my panel that screw fell out and I can now hear it inside the panel. Anyone have any recommendations to fixing it? I wouldn''t even know how to screw it back in if I managed to get it, given that its screwed in from the opposite side.
Hi there! My 2009’accord coupe master window button seems to be jammed.. so I would need to remove the entire panel? Or is there an easier way ? Thanks in advance!
Did you figure out the solution? I'm working on my 2009 Coupe with a broken drivers side switch. I suspect you don't need to remove the entire door panel.
I did. I had to take off the entire door panel. I did then install an Amazon purchased window contraption. It works well, however sometimes since it’s not OEM. It caused electrical Issues like now the horn won’t honk. Sorta weird, but works well!
@@af2033 Well that is definitely weird. The horn should have zero to do with the power window master switch. I've seen inexpensive switches on Amazon for under $40, not sure I trust those. Honda Parts Now has P/N 35750-TE0-A32 for about $190. I plan on contacting bigger junk yards before opening the wallet.
@@blakes4ever I honestly just reinstalled it without it after seeing that the ones online don't come with it either plus it was probably the reason my regular broke and my window fell through my panel because someone had messed with it before
@Barry Weaver Thanks for the tip on how to remove the driver window switch on this coup....would you know how to jump that drivers window switch plug to roll the window up?
@@Roegwon if you have the key flob you can look up the sequence to remotely roll up and down the windows to see if you can get the window to roll up until you can replace the switch.
@@Roegwon I'm glad you got the window up at least. My daughter's car was a Honda Coupe 2010, her remote key flob can roll up both door windows and the sunroof. I also tried it with her drivers window, but her switch was struck in the down position, so it didn't work.
Videos like this are why I love youtube. Explained and demonstrated perfectly the whole way through. 5 stars. Top tier DIY.
Thank you for posting this video. I was able to replace my armrest with no problems and it wouldn't haven been possible without your instructional help. Thanks again!
Glad I was able to help! 😀🤙🏽
Dude, thank you so much, you explained and showed it all perfectly and no fluff. Top notch.
Thanks for taking time to do this video; helped me replace the panel without breaking anything.
Glad it helped!
Great Video. Quick, no BS, explained in detail and made to look very easy. Thank you.
I love simple straight forward vids. No filler no bs. Great info thank you
Dude you are a genius. So we’ll explained and filmed. Thanks so very much
Thanks a lot for this video. It was a great help when I had to remove the door panel to replace my ripped armrest.
Thank you for the amazing video 😊
Thank you for the great details and instructions and clear camera angles, i need it to replace the Windows Switch module
Great video as I have a 2009 Honda Accord with a black interior and I think I'm going to have to remove the door panel in order to get the elbow cushion replaced. I live up in Canada so this is going to have to wait a few weeks till it gets warmer
Your doing the lords work man thankyou 10000%
Those lever connectors don't require 2 hands at all. Just stick a flathead under the lever (pressing on the clip) and twist to open the lever. I love these Honda clips, they are so well engineered.
Great video, excellent explanation 👍
Thumbs up straight to it amazing
Thank you for this video bc I’m changing my speakers and no one has a video for the coupe.
The sound system is trash 😩 I had a 2003 accord that puts it to shame lol what brand of speaker did you use? Did you also install an amp?
thank you for the good explaining ! Really helped me out !
Thank you
thank you so much! now if i could just find a power window switch of my 2012
Great Video, But do you have to remove the panel to replace the window switch all the other model that i look at show from the top piece you can take it off.
Best video ever thank you
Nice clean work my man
I JUST want to replace the window switch. Do I have to take the whole door panel off? I wouldn’t think so.
Super helpful video!!!! Thanks
Instructions unclear: I now have extra screws
Mi auto es un Honda Accord 2012 el vidrio de la ventana se quedó abajo ya no quiso subir usted sabe cuál es el cable del botón para subir el vidrio del lado del piloto?? si no creo creo que subirá el vidrio manualmente quitando todo
I am trying to replace the master switch and i am not sure if the handle pops open or if i have to open the entire panel to replace the master switch any guidence will be appreciated. I have a 2008 Ex-L accord
Thanks
What did you end up doing ?
Any idea of how I can find out which wires I can tap into for power and ground in the harness?
Door handle is not open the door from inside or outside, can the door panel be possibly removed with the door closed?
Yes, you can get the panel off with the door closed. It's much more difficult and you are more likely to breaking something. Remove all the screws then start pulling on their bottom any way you can. You may have to get creative. Good luck!
@@DIYHonda thank you. This all started when a friend took the off to replace the drivers door window switch, cool. Whent to drive car home and couldn't get into vehicle, been having to get in from the passengers side..I'm wondering why...
Tremendo🎉
Reassembly would be nice .-. My door at the top isn't clipping in
Check to make sure clips were not left in your actual door. Also check and see if any clips on the door panel are partially pulled out or sitting sideways.
@@DIYHonda I figured it out. I had to raise the door panel ontop the glass area first (I didn't know this part).
Thank you is that the same as a 2013 2door coupe
@Manny - Thank you I can here to learn how to remove the door panel to replace my switch also. Your comments were helpful.
At 5:38 theres that one screw between the two black prongs holding the metal piece in place. When I removed my panel that screw fell out and I can now hear it inside the panel. Anyone have any recommendations to fixing it? I wouldn''t even know how to screw it back in if I managed to get it, given that its screwed in from the opposite side.
Nice video broda 😎
2:13 The clip is in the middle of the plug on the far left.
I can’t get that plug out for the life of me. There is 0 room to grab it
Do you have a video for 2008 Accord replacement of window power switch?
men you are good, thank you.
Do you know if there is a video for a 2012 lx sedan?
Great detail
Do you have a video for putting the window on track in a 2010 accord
It seems as if there is not a lot of videos on that model I'm also tryna figure that out
Hi there! My 2009’accord coupe master window button seems to be jammed.. so I would need to remove the entire panel? Or is there an easier way ? Thanks in advance!
Did you figure out the solution? I'm working on my 2009 Coupe with a broken drivers side switch. I suspect you don't need to remove the entire door panel.
I did. I had to take off the entire door panel. I did then install an Amazon purchased window contraption. It works well, however sometimes since it’s not OEM. It caused electrical
Issues like now the horn won’t honk. Sorta weird, but works well!
@@af2033 Well that is definitely weird. The horn should have zero to do with the power window master switch. I've seen inexpensive switches on Amazon for under $40, not sure I trust those. Honda Parts Now has P/N 35750-TE0-A32 for about $190. I plan on contacting bigger junk yards before opening the wallet.
2:06 I CANNOT REMOVE THIS PLUG FOR THE LIFE OF ME
How do u put it back on anyone?
Does anyone know what that bracket is called at 5:36 ? I'm missing the bolt for it
Having the same issue - mine came unbolted and just fell to the ground when i pulled the panel. Cant find a way to properly reinstall
@@blakes4ever I honestly just reinstalled it without it after seeing that the ones online don't come with it either plus it was probably the reason my regular broke and my window fell through my panel because someone had messed with it before
can u make a video for a master driver switch removal or do you have to remove the whole panel to replace the widow switch?
@Barry Weaver Thanks for the tip on how to remove the driver window switch on this coup....would you know how to jump that drivers window switch plug to roll the window up?
@@rocnroll0065 same. Mine just got stuck down because the button broke
@@Roegwon if you have the key flob you can look up the sequence to remotely roll up and down the windows to see if you can get the window to roll up until you can replace the switch.
@@rocnroll0065 tried that but it didn't work for some reason. Got the window up jumping the connector
@@Roegwon I'm glad you got the window up at least. My daughter's car was a Honda Coupe 2010, her remote key flob can roll up both door windows and the sunroof. I also tried it with her drivers window, but her switch was struck in the down position, so it didn't work.
My door handle doesn't want to open the door from the inside it opens from the outside
need help putting it back on
Not helpful need the passenger door removed
thank you