2003-2007 Honda Accord Door panel removal

Поделиться
HTML-код
  • Опубликовано: 30 сен 2015
  • 2006 Honda Accord Plastic door panel removal. You want to remove this piece in case you want to replace the window, window motor, or the power switch harness.
    Tools:
    amzn.to/2bdCm1Y Plastic pry bar
    amzn.to/2awcdGr Phillip screw driver
    Parts:
    None
    Torque specs:
    Hand tighten
    like and share this video!
    If you have any questions or concerns, feel free to leave comments on our FB page.
    Like us on Facebook
    bit.ly/nutzaboutbolts1
    and SUBSCRIBE!
    bit.ly/NutzAboutBolts2
    Intro: RavenProDesign
    www.RavenProDesign.com
    Music: Manic Bloom - Death and Conversation
    / manicbloom
  • Авто/МотоАвто/Мото

Комментарии • 204

  • @emsjane23
    @emsjane23 5 лет назад +59

    This video saved me $250!! Thank you so much for posting! I was able to fix my window with no broken pieces and minimal cursing!

    • @cwilson1028
      @cwilson1028 3 года назад +1

      🤣🤣🤣

    • @nadirboutella4171
      @nadirboutella4171 3 года назад +1

      Wait what was wrong with your window did you had to glue it back? IF SO let me know what you used I'm planning on doing that today

    • @tonezchannel1711
      @tonezchannel1711 5 месяцев назад

      I did this nothing worked window still will not roll up

  • @cre8tadream
    @cre8tadream Год назад +9

    For the 2004 Honda Accord EX Coupe (2 Door): Rather than one screw in the armrest underneath a rubber mat, you will find two screws facing in towards the door underneath (towards the bottom) of the armrest.

  • @cronoodle
    @cronoodle 7 лет назад +10

    I used this video to fix my window that fell off the track. It was very helpful. Thank you!

  • @darrellblair5818
    @darrellblair5818 Год назад +6

    Fantastic video. Exactly what I needed to see. Thanks.

  • @Yoolsin
    @Yoolsin 3 месяца назад +2

    THANK YOU! My window had come off it's track and I was able to fix it myself!

  • @schmigr
    @schmigr 6 лет назад +7

    Good video on how to remove door panel to enable access to a variety of components and fasteners. I used it to lower the panel to ease access to the bolts holding in the side view mirror. I didn't have to remove the panel entirely, thus eliminating the need to detach the control console on the armrest or the cable to the door latch.

  • @matthewclements7842
    @matthewclements7842 3 года назад +4

    Just picked up an 07 accord with a loose window. Exactly what I needed to know. Thanks man!

  • @losxlakers
    @losxlakers 7 лет назад +1

    The last thing you said was reset the power switch, what's that and how do you do that? I'm so glad you're back. I have a 2004 Honda Accord and it needs a lot of work. I was pretty worried when your channel was down. You guys are awesome! You guys are very detailed and explain things very well. You guys have the right tools too. Thanks guys.

    • @NutzAboutBolts
      @NutzAboutBolts  7 лет назад +2

      you want to put the driver side window down all the way, then press and hold for 5 seconds. After that, you bring the window all the way up, then press and hold up for 5 seconds. That's how you reset the auto window up and down for the driver side.

  • @dannygonzales2514
    @dannygonzales2514 4 года назад

    Fixed my friends car with this video! Thanks bud!

  • @fenekilll
    @fenekilll 5 лет назад +4

    Thanks dude, I hope this works for my 04 tsx

  • @the1964gman
    @the1964gman 7 лет назад +4

    Thanks! I had to replace the window regulator on 2004 Honda Accord and when I put it all back together for some reason the inside door handles would not work. After watching your video I see my mistake. Thanks for posting.

  • @user-yc2oz8kc5k
    @user-yc2oz8kc5k 8 месяцев назад +1

    My door handle cable seems to have snapped so now I know how to remove the panel to replace it. Very nice

    • @jaredmiller2128
      @jaredmiller2128 7 месяцев назад

      I learned the hard way that if you remove the panel as demonstrated here, the green plastic holder on the door cable will almost always break. If you remove the door handle before removing the door panel, you can avoid breaking the plastic piece. I'll be opening my door from the outside until my new cable arrives. I'm sure 8 years ago the plastic on this guy's car was still pliable enough that he could get away with this. Not so much now.

  • @GAGE1959
    @GAGE1959 3 года назад +3

    Awesome job sir ! You make it so easy to understand the process !

  • @diablo1271
    @diablo1271 Месяц назад +2

    Thank you so much for This video. It was very helpful😊

  • @paulhumpal8015
    @paulhumpal8015 Год назад

    Thank you for this video. It has helped me a lot. A super demonstration.

  • @killtheidols1326
    @killtheidols1326 4 года назад +1

    Thank you man,,,,hi from Spain,,,

  • @Octopopsv_
    @Octopopsv_ Год назад

    Thank you for the help. You're a life saver

  • @deborahmartyn97
    @deborahmartyn97 Год назад

    so helpful, thanks.. shall be tackling malfunctioning window soon

  • @ericsonchagas
    @ericsonchagas 2 года назад +1

    Congratulations for the video, I know it was a long time ago, but it is been useful for me now. Do you know what black gooey stuff is this at the white plastic cover? Cause I'll need replace mine dirty one. Thanks.!

  • @squirrelattackspidy
    @squirrelattackspidy 4 года назад +2

    Great video dude! Is it hard to get the motor out if it needs to be replaced? If the window stopped half way up, is it likely that the motor is okay but the window is stuck on the track or out of alignment?

  • @robertd.7101
    @robertd.7101 2 года назад +1

    It is strongly suggested to disconnect the battery when working on your car. even something simple as unplugging switches.

    • @archivaldo4310
      @archivaldo4310 Год назад

      Really shit I never thought of that I didn't think it hurt anything

  • @bigrob9759
    @bigrob9759 7 лет назад +3

    is this also applicable for acura tl 04 - 08?

  • @user-or5wh8um6z
    @user-or5wh8um6z 2 года назад

    Thank you man you really helped me 👍

  • @cgrscott
    @cgrscott 6 лет назад

    Thanks. I'm accessing the inside of the door and removing the sliding window glass to get the lock cylinder out to re-key the door lock. I have successfully done it with my 2003 Honda Civic and it looks like the process on the 2005 Accord will be similar. Removing the cover panels off he Accord door is a little different than with the Civic. Your video is very helpful.

    • @NutzAboutBolts
      @NutzAboutBolts  6 лет назад

      glad we could help :)

    • @cgrscott
      @cgrscott 6 лет назад

      I did not have remove the window glass after all before I attempted to.

    • @NutzAboutBolts
      @NutzAboutBolts  6 лет назад

      usually you don't need to remove the window glass when removing door parts...

  • @georgiaguardian4696
    @georgiaguardian4696 4 года назад

    Thank you for making the video Very useful1

  • @deebsmigs
    @deebsmigs 2 года назад +1

    How do you remove the wire thing for the window switches? Mine seems stubborn. The side view mirror one was easy to disconnect.

  • @tehxii7706
    @tehxii7706 2 года назад

    Any speaker recommendations that plug in and fit? I suppose you'd have to replace them all to make a difference.

  • @krzysiekpawlak6992
    @krzysiekpawlak6992 Месяц назад +1

    Thanks, mate. I have a problem with the lock and I'm trying to fix it myself. Thanks to you, I know how to remove the door panel 😁

    • @NutzAboutBolts
      @NutzAboutBolts  Месяц назад

      No problem! I also made a video on how to replace the door lock actuator.

    • @krzysiekpawlak6992
      @krzysiekpawlak6992 Месяц назад

      ​@@NutzAboutBoltsCan you provide a link to the video?

    • @NutzAboutBolts
      @NutzAboutBolts  Месяц назад

      @@krzysiekpawlak6992 here you go ruclips.net/video/y4Qete3nBeo/видео.htmlsi=_Lt3RanZFjP7h2of
      It’s for the passenger side, but it’s the same concept for the driver side, just different part used for the actuator, instead of the passenger side actuator, you’ll need the driver side actuator for the driver side door. I hope that helps.

    • @krzysiekpawlak6992
      @krzysiekpawlak6992 Месяц назад

      ​@@NutzAboutBoltsWell, now I know what it's about. Will a new actuator be needed or will regeneration be enough?

    • @NutzAboutBolts
      @NutzAboutBolts  Месяц назад

      @@krzysiekpawlak6992 if the door doesn’t unlock or lock, you’ll need a new one. Not sure about regeneration. Never heard of it.

  • @joshuagerloff4065
    @joshuagerloff4065 8 лет назад

    Is there anything different I need to do for my 2001 Accord? Also, how I can i tell if its the windows motor or a blown fuse? just wondering Im new when it comes to cars so help would be appreciated

  • @truejey7475
    @truejey7475 5 лет назад

    Do you know what kind of glue adhesive can i use to seal my door with that plastic cover? I have water coming in to my passenger footwell when it rains.Thanks a lot bro

  • @danfuerthgillis4483
    @danfuerthgillis4483 6 лет назад

    Lmfao my Accord 2008 coupe window was getting stuck on the top rubber today it fell in. 15 minutes later was up and running with your video lol. Also found out someone already changed the glass and did a poor job at the installation , also the glue was gone on the plastic track and lol there was no grease on the up down track lmfao. Excellent video!!

  • @tudorsor91
    @tudorsor91 6 лет назад

    how to replace the turning lights in the mirror? i have an 2004 honda accord euro model

  • @boxofgreens698
    @boxofgreens698 7 лет назад

    Thanks for the help

  • @arieagung
    @arieagung 6 лет назад

    I have same problem with the same window, is it kind of factory defect?

  • @yardlimit8695
    @yardlimit8695 5 лет назад

    good vid............thanks,,,,,,short and to the point without a lot of wasted words and useless jibber jabber..........thanks again.

  • @chris-samuel-cesar
    @chris-samuel-cesar 3 года назад

    Hey wut up what if one of the plastic break on me can it be replace let me know thanks

  • @johncasoni4379
    @johncasoni4379 3 года назад

    2006 Honda Accord EX Coupe door panel is different. I have locked door and no idea how to get panel off. Right now there are 2 screws in the bottom of arm rest, under electronic window switch, which are a problem to get out, but when those are out, still don't know if panel will come off.

  • @wussawp-csgochannel5872
    @wussawp-csgochannel5872 5 лет назад +28

    Voice of toby from the office

  • @stevenarellano1988
    @stevenarellano1988 5 лет назад +1

    Are both two door and four door the same size??

  • @Fuzznuv
    @Fuzznuv 8 лет назад

    hey man! Can y'all please do a vid on how to change the front wheel hub assembly on an 03-07 accord 4cyl please?? I need that bad!

    • @NutzAboutBolts
      @NutzAboutBolts  8 лет назад

      +Jordan johnson are you talking about the front hub? its pressed in on the wheel bearing, we can't do the video since we don't have a press.

  • @karleejenkins4852
    @karleejenkins4852 6 лет назад

    What if one of those button clips won’t come out ? Have tried everything can’t get it to come out

  • @terryscott1950
    @terryscott1950 2 года назад

    Great video thank you so much!

  • @ewallacestudent1
    @ewallacestudent1 5 лет назад +1

    doing speakers tomorrow thanks for the visual.

  • @kvang254
    @kvang254 8 лет назад

    Thanks for the video. I was having issues with my keyless entry and figured I'd take the door panel off and take a look at the switches.

    • @NutzAboutBolts
      @NutzAboutBolts  8 лет назад

      no problem :)

    • @enexsix
      @enexsix 8 лет назад

      You don't have to remove the door panel to check the keyless entry switches. The unlocking receiver is part of the master power window switch unit (the one he removes from the door panel to take the wiring connectors out the bottom at the beginning). The cable goes back to the dash after that. If your receiver has gone bad, you can replace it in five minutes (it comes as part of a new switch unit). Not to be daft, but have you tried replacing the battery in your keyfob first?

    • @kvang254
      @kvang254 8 лет назад

      enex six
      yeah I've checked the battery in the keyfob. Well just an update, I had a few plans to fix the keyless entry. Started off with the keyless programming and it fixed the issue. Lock, unlock, trunk, and panic all work just fine now

  • @twonice4u
    @twonice4u 8 лет назад +2

    Could you show how to remove the front bumper of a 2006 Honda Accord.
    Also what size are the clips for the front bumper. (I'm missing some)
    Thanks, loving the videos.

    • @NutzAboutBolts
      @NutzAboutBolts  8 лет назад

      +twonice4u We'll add it to our list, we'll have to find a day to be available to film...

  • @12345brick1
    @12345brick1 7 лет назад +1

    the one thing that i needed to learn was already done. the cable to the door handle was already disconnected

    • @scientist100
      @scientist100 7 лет назад

      It is hard to get but the first safe thing to do is pull the handle out (there is always play) and get a regular size flat driver and pry the plastic holding it and then pull it up to disconnect it.

  • @TheoneandonlyLadyLiz
    @TheoneandonlyLadyLiz 6 лет назад +1

    awesome and helpful

  • @TinaCalifa
    @TinaCalifa 6 лет назад

    Thank You !!

  • @companrene8348
    @companrene8348 9 месяцев назад

    Muchas gracias

  • @celerosario6228
    @celerosario6228 Год назад

    Gracias por compartir.

  • @thc2thefacejp844
    @thc2thefacejp844 8 лет назад

    hey , I appreciate the help u gave me last week . i have a 98 corolla le with overdrive . It's idle is lower than Normal and acceleration is sorta sluggish . I need your master mechanics skills !! Lol please and thank you

    • @NutzAboutBolts
      @NutzAboutBolts  8 лет назад

      +Justin Platon any check engine light?

    • @thc2thefacejp844
      @thc2thefacejp844 8 лет назад

      +NutzAboutBolts yes , the check engine is on . speed sensor is bad . i took that off , error code registered trans speed sensor. even cleaned my throttle body some what. any idea ?

    • @NutzAboutBolts
      @NutzAboutBolts  8 лет назад

      Justin Platon
      you want to fix all your check engine light code and then recheck your car, other than that, you can't do much besides fixing the codes first.

    • @thc2thefacejp844
      @thc2thefacejp844 8 лет назад

      +NutzAboutBolts okay I'll recheck auto zone and see the codes again. I can do a video of my car as well. not sure if u have time

  • @jeffreycontreras6150
    @jeffreycontreras6150 Год назад

    Nice job 👍

  • @terrythepion6181
    @terrythepion6181 4 года назад

    What is the name of that plastic bag looking piece and where can I find it

  • @aqui7817
    @aqui7817 5 лет назад

    Thank you so much for this video.

  • @TheJonwashington1
    @TheJonwashington1 8 лет назад +1

    I checked the 20 amp fuse and it's good. What do I check for now?

    • @NutzAboutBolts
      @NutzAboutBolts  8 лет назад

      +Jonathan Washington could be a faulty driver's power window motor or an open in the wire.

  • @thomaswooden3
    @thomaswooden3 7 лет назад +2

    I have a 2006 honda accord the driver side door window goes up and down, but none of the other windows work, so I'm thinking the motor is ok, what would your recommend I check next?

    • @NutzAboutBolts
      @NutzAboutBolts  7 лет назад

      does the master switch works when using on the driver side? does the window go up when you use it on their individual sides?

    • @Truth_Seeker407
      @Truth_Seeker407 5 лет назад

      Google it. I found the fix. U bridge two wires under the window switches

  • @bIgbossdornel1574
    @bIgbossdornel1574 6 лет назад

    QUESTION !!!!!!!!!! when I roll my 2 front mirrors up/down they make a squeaky sound, any idea what part might be going bad or rubbing against it to cause that sound ?

    • @NutzAboutBolts
      @NutzAboutBolts  6 лет назад +1

      could be the weather strip for the glass is worn. Try using silicone spray on the rubber part and see if the noise goes away. It's probably old and brittle so they are dry and cause noise when rolling the glass window up and down.

  • @SashaNem
    @SashaNem 10 месяцев назад

    thank you

  • @fatboy12G
    @fatboy12G Год назад

    How do you reset your power switch?

  • @joeslacy
    @joeslacy 7 лет назад +1

    Can you do this same procedure with the door closed and not able to open?

    • @NutzAboutBolts
      @NutzAboutBolts  7 лет назад

      no because you need to take off the plastic door panel.

  • @hieppham7435
    @hieppham7435 8 лет назад

    Thank you

  • @thecarexpert21
    @thecarexpert21 8 лет назад

    I've noticed, a recent issue on our 2006 Accord, is when you lock or unlock the doors, you'll hear this screeching noise coming from inside the door panel. Any ideas on what it could be? Doors lock and un lock fine still.

    • @NutzAboutBolts
      @NutzAboutBolts  8 лет назад

      +thecarexpert21 I would still remove the door panel to inspect the noise, everything is there for you to see. So you can mess around and see where's the noise is coming from.

    • @landshass2849
      @landshass2849 6 лет назад

      I had the same noise in my 2006 Accord. I ignored it for years and nothing wrong happened.

  • @cyndifoore7743
    @cyndifoore7743 5 лет назад

    Great channel.
    You remind me a little if the asian guy on Dexter, your profile and mannerisms, not your language.
    Peace

    • @zero9112
      @zero9112 4 года назад

      "Now you're dealing with science and science is one cold-hearted bitch with a fourteen inch strap-on."

  • @leroycharles9751
    @leroycharles9751 Год назад

    Thanks.

  • @Chumpers001
    @Chumpers001 5 лет назад

    What size wrench do I need? My 2004 Accord power window motor is giving me trouble.

    • @NutzAboutBolts
      @NutzAboutBolts  5 лет назад

      Jeremy Baloun I believe we did a video for that on the 2002 accord. Should be the same size as that.

  • @ShowMMaker
    @ShowMMaker 4 года назад

    Nice, works

  • @chadcuckproducer1037
    @chadcuckproducer1037 Год назад

    Thank you.

  • @amit666715
    @amit666715 7 лет назад

    I have an issue with my 2004 Acura MDX ,when I unlock the door with the remote or key get inside and start it all the doors automatically lock ,the problem is if I unlock it and leave the car soon as the doors close it locks again with the key still in ..what might be the issue?

    • @NutzAboutBolts
      @NutzAboutBolts  7 лет назад

      probably something with the programming of the key door locks. I would ask the dealership if they can reprogram it for you or something.

  • @burgerking220
    @burgerking220 8 лет назад

    I got hit my passenger fender and this caused the window to stop working. It will go down very slowly and make some scratching noises. Do you have any idea of what might be the problem? Or what I can do? I would really appreciate any help.

    • @NutzAboutBolts
      @NutzAboutBolts  8 лет назад

      could be a wire harness problem if the wire is routed through the fenders.

  • @TheJonwashington1
    @TheJonwashington1 8 лет назад

    I have a 2004 Honda Accord Lx coupe. My driver side window stopped working a few days ago. I checked the master window switch on the driver's side, it will let down the passenger's window down, but not the drivers window. I replaced the master switch and it still doesn't work. I don't know what's going on. Can you help, please?

    • @NutzAboutBolts
      @NutzAboutBolts  8 лет назад

      +Jonathan Washington Did you check the 20 Amp fuse under the kick panel??

  • @killtheidols1326
    @killtheidols1326 4 года назад

    Big like bro,,,,

  • @Youthoughtso185
    @Youthoughtso185 8 лет назад +1

    Is there anyway you can make a video showing how to replace the driver door window regulator and motor in the honda accord 2003-2007? That would be so useful. Thank you.

    • @NutzAboutBolts
      @NutzAboutBolts  8 лет назад +1

      +Derek we'll take that into consideration, as it is pretty much the same like this and then removing the motor.

    • @Youthoughtso185
      @Youthoughtso185 8 лет назад

      +NutzAboutBolts thank you.

  • @iamstephaniepouliot
    @iamstephaniepouliot 8 лет назад

    I have an Accord DX without power mirrors, so I can't merely "pop out" the triangle shaped trim piece in the upper corner of the door, because there's an lever attached to that piece to adjust my side mirror. Any ideas on how to get this piece off with the lever attached? I've tried pulling and prying it off, but it won't budge and I don't want to break it.

    • @NutzAboutBolts
      @NutzAboutBolts  8 лет назад

      it could be twisted on or screwed on... not too sure, do you have a picture?

    • @iamstephaniepouliot
      @iamstephaniepouliot 8 лет назад

      I'm not sure how to post a picture here, but you can find a pic of the driver's side door easily by doing a Google image search of a 2004 Honda Accord DX.

    • @NutzAboutBolts
      @NutzAboutBolts  8 лет назад

      I tried to google it and still don't see it. You can go to our FB page and send us a message with a picture of the part. Front and back please, thanks!

  • @poolnoodle5412
    @poolnoodle5412 4 года назад

    My window just makes a grinding noise and won’t roll up at all is it off track??

    • @NutzAboutBolts
      @NutzAboutBolts  4 года назад

      I’d open the panel and check if the window glass is bolted on the rail track. It’s pretty simple to do.

  • @kuroshitsui1292
    @kuroshitsui1292 8 лет назад

    can you make a video for the oil pump gasket?

    • @NutzAboutBolts
      @NutzAboutBolts  8 лет назад

      +Kuroshi Tsui there's no oil pump gasket, the oil pump is in the oil pan held on by bolts... there is no gasket to be replaced.

    • @kuroshitsui1292
      @kuroshitsui1292 8 лет назад

      +NutzAboutBolts Damn Lol, I'm new to cars unfortunately proud 7th gen accord owner but I've been having an oil leak...last time I had one was last year In December it was the vtec solenoid gasket I replaced it and it ran no problem until a couple of weeks ago. leaking oil again but I can't find where..seems like its under the steering wheel pump by the tensioner. you know anything by any chance?

    • @NutzAboutBolts
      @NutzAboutBolts  8 лет назад

      Kuroshi Tsui I would say put in some oil dye or dye in general and use a black light to find the leak. You can buy the kit at an auto store. Make sure to clean the leak area, put in the dye, then wait for about a week or so, and use the dye light to trace where the leak is coming from.
      The only known leak in that area that I know was from the power steering reservoir. It leaked onto the frame and I thought it was from the clamp, but it was from the p/s reservoir, which cracked on the bottom.

    • @kuroshitsui1292
      @kuroshitsui1292 8 лет назад

      +NutzAboutBolts alright. thanks! your videos are great too very helpful, the only channel I've found that works on 7th gen accord. Thanks again

    • @NutzAboutBolts
      @NutzAboutBolts  8 лет назад

      Kuroshi Tsui
      thanks! let us know how it goes. :)

  • @TheJonwashington1
    @TheJonwashington1 8 лет назад

    where is the fuse located under the kick panel?

    • @NutzAboutBolts
      @NutzAboutBolts  8 лет назад

      +Jonathan Washington it's on the left side where you step on the gas pedals. There's a plastic cover you remove and there will be fuses behind there

  • @paulshires7914
    @paulshires7914 7 лет назад +1

    The gooey stuff is called butyl sealant

  • @kasjamm
    @kasjamm 4 года назад

    I'm having trouble putting the panel back on. Nothing will line up...

    • @NutzAboutBolts
      @NutzAboutBolts  4 года назад +1

      kasjamm you want to line up the top first, where the window seal is at, it should sit on it before you start snapping the rest of the panel up.

    • @kasjamm
      @kasjamm 4 года назад

      @@NutzAboutBolts Thanks! I got it.

  • @yaboydryp
    @yaboydryp 3 года назад

    Does this apply to the 06 Acura TSX?

  • @MindOverEverything
    @MindOverEverything 8 лет назад +1

    Good video. Can you give me any advice on how to get to my ECU on a 7th gen Accord? I haven't found anything useful online. Thanks!

    • @NutzAboutBolts
      @NutzAboutBolts  8 лет назад

      +MindOverEverything It looks like it's behind the center console of the vehicle. You'll probably have to remove the center box to get access to the ECM/PCM.

    • @MindOverEverything
      @MindOverEverything 8 лет назад

      I was afraid of that :) Kind of hoping for a way to it via the glove box, but I'll just have to give it a go through the center. Thanks!

    • @NutzAboutBolts
      @NutzAboutBolts  8 лет назад

      MindOverEverything
      what is wrong with your ECM if I may ask?

    • @MindOverEverything
      @MindOverEverything 8 лет назад

      Nothing. Just want to make it tuneable :-)

    • @NutzAboutBolts
      @NutzAboutBolts  8 лет назад

      MindOverEverything
      oh ok. lol gl :)

  • @padelmar
    @padelmar 7 лет назад

    How do you remove the front passenger's door panel? It is different to the driver's

    • @NutzAboutBolts
      @NutzAboutBolts  7 лет назад

      hrm, we'll have to film it, its a lot easier than the driver side

    • @Spex805
      @Spex805 7 лет назад

      padelmar Its the same just without the master switch.

    • @proshredda91
      @proshredda91 3 года назад

      Look UNDERNEATH the arm panel. Up above the storage area in the door I found two screws.

  • @pochologabriel7404
    @pochologabriel7404 8 лет назад

    hey do you have any video for the rear door driver side?

    • @NutzAboutBolts
      @NutzAboutBolts  8 лет назад

      not as of right now... whats wrong with yours?

    • @pochologabriel7404
      @pochologabriel7404 8 лет назад

      +NutzAboutBolts oh i think the door latch might been disconnected? i cant open the door from. the inside

    • @NutzAboutBolts
      @NutzAboutBolts  8 лет назад

      oh... I see, its the same procedure as removing the front door panel.

    • @pochologabriel7404
      @pochologabriel7404 8 лет назад

      +NutzAboutBolts ok sir thanks im gonna try opening it.. hey bybtge way do you have any idea how to replace evap on the accord? i got cel and pulled out the codes its a evap leak

    • @NutzAboutBolts
      @NutzAboutBolts  8 лет назад

      Evap canister is on the engine compartment starting from the driver side down to the rear of it... evap leak can be around any of that place... gotta see where the leak is coming from first.

  • @stepheng8513
    @stepheng8513 Год назад

    My daughter took my 07 Accord out the other day left the windows down and water all in it wondering if it will just dry out on its own

    • @NutzAboutBolts
      @NutzAboutBolts  Год назад +1

      I believe it will, the electrical component is well covered. There’s no open electrical wire to cause a short.

    • @stepheng8513
      @stepheng8513 Год назад

      Ok thanks. Real quick my driver side goes down but non of the other will go down so far keep my fingers crossed.

    • @NutzAboutBolts
      @NutzAboutBolts  Год назад +1

      @@stepheng8513 is it only the master switch buttons doesn’t work? Have you tried those individual window control on the door? If they all work individually on their own door, then I’d suspect it’s the master control switch on the driver side door that is at fault. I’d get another switch and swap it out to make sure it works. If not, you’ll need to further diagnose the electrical issue or the switch.

    • @stepheng8513
      @stepheng8513 Год назад

      The other windows won't go down even if I try it from that individual door

    • @NutzAboutBolts
      @NutzAboutBolts  Год назад +1

      @@stepheng8513 does that happen on all the windows?

  • @jz8179
    @jz8179 6 лет назад +1

    Shit,I have to take my door panel off cause my drivers door won't open from inside and outside the car with the remote and using the key on the door to unlock it it won't open.Ive got my work cut out for me.

    • @johncasoni4379
      @johncasoni4379 3 года назад

      Same problem, how did you get panel off with locked door?

  • @JolinHard
    @JolinHard 2 месяца назад

    Can I access window like this? My window is stuck at the bottom

    • @NutzAboutBolts
      @NutzAboutBolts  2 месяца назад +1

      Yes, you can access the window if you open the plastic door panel. It’ll be on a window rail track that goes up and down by using the door control.

    • @JolinHard
      @JolinHard 2 месяца назад

      @@NutzAboutBolts thank you for fast response! I wasnt able to pull it out with ruler/tape so i will remove door panel

    • @NutzAboutBolts
      @NutzAboutBolts  2 месяца назад +1

      @@JolinHardthe window glass is held on by 2 10mm bolts I believe. Just be careful not to break the glass

    • @JolinHard
      @JolinHard 2 месяца назад

      @@NutzAboutBolts man I got the door panel off but I can’t seem to pull the window up still

    • @NutzAboutBolts
      @NutzAboutBolts  2 месяца назад

      @@JolinHard you can’t pull it up, you’ll need the window regulator to work

  • @lolabunny1157
    @lolabunny1157 Год назад +2

    My key literally fell down into the door panel 🫠😂

    • @NutzAboutBolts
      @NutzAboutBolts  Год назад

      Must be a big gap. 😬

    • @lolabunny1157
      @lolabunny1157 Год назад

      @@NutzAboutBolts lol it was a tiny house key it fell under the rubber thing in the door :(

    • @NutzAboutBolts
      @NutzAboutBolts  Год назад

      @@lolabunny1157 oh, thought you meant the key fob lol

  • @friendly_italian4928
    @friendly_italian4928 3 года назад

    Why won’t my door lock now?

    • @NutzAboutBolts
      @NutzAboutBolts  3 года назад

      🤷🏽‍♂️ what’s the history on it?

  • @c5scottman
    @c5scottman 5 лет назад

    At the 4:00 mark you skipped the part of how to remove the cable.

    • @NutzAboutBolts
      @NutzAboutBolts  5 лет назад

      c5scottman it was more of an overview of how to remove it and see what’s behind it, kinda like what the cops do, strip and search 😉

  • @garysilvers1721
    @garysilvers1721 3 года назад

    Rear door glass please
    ?

  • @tommiestinson2146
    @tommiestinson2146 2 года назад

    I hate when they talk so much in the beginning of the video just get to it!!!!!!

  • @santanam5718
    @santanam5718 8 месяцев назад

    So i have a 2006 honda accord, but have 2005 honda accord interior.. will it fit?? Someone help.