@@faints2560 Amazon and it was Moto Pro. However I just looked on Amazon under Order again and they have raised the price to $999 with free shipping. I guess I was lucky before this Covid plandemic.
Hey man so I noticed your original air filter had the oil overflow connected to it, that’s to add the air pressure from the bottom end and dump it right into the carb.. basically same way a turbo works but way less PSI.. (likely why it needed a tune after)
@@zacharyenck1087I have the 125cc Coolster it has that, I want to do this upgrade does anyone have a tutorial on how to do it properly? This is the first dirt bike I’ve ever owned I wanted to learn before I spend $8k 😅
Cool vid. Could you make a video on the chain guard. My first bike had it a week, my chain guard disappeared i guess it broke while was riding ! the white plastic part
Yeah man, I already have a lot of uploads ready so it may take a little while. You could dm on instagram at instagram.com/batahaaa/ and I could see if I can help you.
Yo I got a ssr200 dirt bike it’s in good shape only issue it has a fork leak is that super bad for it? Will it cause any actual damage ? I’m keeping it around my neighborhood for rn is that okay
I’m pretty sure that’s a crank case breather if the crank case gets to much oil pressure it will push some through there and burn it in the engine it’s more eco friendly
What’s up man I just got this bike yesterday and it was running smooth and nice when i got it and it needed some oil because it was low so i got some 10w40 and put too much and the bike started to bog and bits of blue smoke came out of exhaust then i drained that oil and got fresh oil in there(the right amount this time) the bike is fine now but it’s still bogging when in high rpms and i have already gave it a carb clean and it has fresh 93 gas in it i need some help if u have any ideas?
oil definitely got into your carb. Check your carb seals. after that, check the exhaust seal and muffler. Then engine seals. something could've gotten burnt up.
Use 91 octane and if it’s brand new change the oil after the first 3 hours of easy riding no high rpms and then wait for it to cool down, change the oil, should only need 1 full quart, and do that about 2 more times to finish breaking it in. After that just change it maybe after 4-5 good rides on it you could probably go longer but with dirt bikes I think you should change it relatively often.
Great video I was wondering if you knew how to fix the bike bogging when given throttle any faster than the rate at which a turtle crawls 😅😂🤣😂 If you try to accelerate quickly, from dead stop, or while cruising, it immediately bogs and tries to die unless I let off the throttle. Ive adjusted the only screw on the carburetor as best I can and it doesn't get any better... I'm sure its something simple, but it's legitimately brand new and I don't feel like pulling the plastics off just to get the carb out to not know wtf to do LOL Its like 20% rideable as is... good for a kid... terrible for me LOL Its done this since I got it running (changed oil before I even started it.) So I'm at a loss at this point lol
Master AF What gas are you using? Use non ethanol gas and that should free up the bogging. If you are already using non ethanol gas then you may need to clean out your carburetor or get a new one. You don’t have to take off the plastics to get the carb there’s just the front pipe you take off by 2 screws and you air filter is on the other side held on by a clamp. Hope this helps if you try this and still have problems dm me on insta.
@@Bataha I agree. Mine stopped almost all bogging when I switched to non ethanol. I thought it being broken in was it, but now I'm convinced you are correct.
@@Bataha i looked it up and it comes from the crank case it said to put it in a good place where dirt can not get in it or els dirt will go in the crank case
U really think a airfilter is gonna make a difference I mean I ran a 212 before 3years with the nibbi black an yellow filter I take it off don't see no difference with it on or off cept for the metal cone filter does restrict the flow
@@Bataha Some of the aftermarket carbs have the same jets installed. The good thing is. They are easier to take apart and change the jetting. That should give you more power.
True but, out of all the times it still showed 1-2 mph gain for most so I'd say it makes it a little faster. Not a perfect test, there is alot of room for error.
@@Bataha I think after it was broken in it was a bit faster. I also pulled out that baffle or screen in the exhaust. So maybe the uni filter and no screen in the exhaust makes a difference.
stepdad looking at one to get me... been wanting a bike for years now. hope i get it, especially since google said top speed was 37 haha the 2 dislikes are people who only spend 1000s of dollars on name brand bikes
@@Bataha where did you buy it from? I can’t find this bike on sale ANYWHERE and it’s annoying. It’s almost like everyone bought all of them or something
U know when u wheelie like that it makes ur frame crooked ...trust me I have a friend who was practicing to wheelie on his and he sent it to garage to sevice it and he was told his frame was bent...especially they chinese bikes
It was a slight downhill , you were slower cause the engine , pistons need compression back for the combination be able to push the pistons further faster.if it makes sense.
Авто/Мото
LETS GOOO BRO THIS IS WHAT I LIKE TO SEE
Change the sprocket size and it will go much faster like 55 or even 60 probably
im so glad you post about this bike bro i just bought one thanks to you!!!!!!!! 2 weeks and its here!!!!!!!
Yeah man! That's sick, you'll have a lot of fun!
I wish mine was running it has no spark and i did everything
@@camerondunham8734 check stator I had a 140 left it In The rain change the stator that should give it spark
@@rc3141 it has a brand new stator, coil and a new cdi box
@@camerondunham8734 check solenoid and kill switch
Yo thx so much for making these vids, you have the exact pit bike I want, and your doing the exact things I want to do on it, keep up the vids.
thanks bro
Np, and I also want to add a carb to it after I've had it for 2 weeks or so
That will be my next upgrade
Awesome, cant wait to see it!
You seem like a really nice guy! Have a great life bro best wishes!
🤣🤣🤣
@@joeymcquilkin3670nice gs300
My 125 Road Ripper hits 60 top speed with a stock filter on. Ima have to cop one of these and see how far it’ll push! Thanks for the vid man👊🏽
I have the road ripper do you have any Boggyness issues?
Insta sub
I rly liked the tao tao 125 review you made
Im thinking about getting a dirt bike at some point too
i have the same bike as yours but the apollo i love to see new Chinese pit bike content like this keep it up
Thank you!
“Oh boy there’s a neighbor”
Great video!!! You hammered it !
Thanks!!
The cheapest best mods for speed are front sprocket,nibbi carb,filter, and slip on exhaust
Slip ons are trash
What exhausts are y’all running?
Jon eBay muffler
ReppdOut no, on these “Chinese dirt bikes” it makes them much better
@@Ethanm64 true but once u drop the bike it's all over
Finally UPGRADES!!!!! 😱🤗🤯
Yeah it's about time
Bro I might get one and you have good content
Amazing Video
Thanks
This channel got a future tho
thanks bro
post more about this bike lol bc I might get it
I have one I got last November. Very good quality for $754 delivered.
MayBeSo do u know what website?
@@faints2560 Amazon and it was Moto Pro. However I just looked on Amazon under Order again and they have raised the price to $999 with free shipping. I guess I was lucky before this Covid plandemic.
Hey man so I noticed your original air filter had the oil overflow connected to it, that’s to add the air pressure from the bottom end and dump it right into the carb.. basically same way a turbo works but way less PSI.. (likely why it needed a tune after)
Just crankcase pressure no need for it it ruins the engine more with it its only for emissions i completely deleted mine and it runs fine
@@zacharyenck1087I have the 125cc Coolster it has that, I want to do this upgrade does anyone have a tutorial on how to do it properly? This is the first dirt bike I’ve ever owned I wanted to learn before I spend $8k 😅
Cool vid. Could you make a video on the chain guard. My first bike had it a week, my chain guard disappeared i guess it broke while was riding ! the white plastic part
Yeah man, I already have a lot of uploads ready so it may take a little while. You could dm on instagram at instagram.com/batahaaa/ and I could see if I can help you.
If you want more speed change the sprocket size.
Yo I got a ssr200 dirt bike it’s in good shape only issue it has a fork leak is that super bad for it? Will it cause any actual damage ? I’m keeping it around my neighborhood for rn is that okay
I upgraded mine from stock to the same air filter my bike idles fine but Boggs hard when riding or if I snap the throttle. Any ideas
correct me if I am wrong but I am pretty sure it went faster uphill is because the air filter added more airflow which added more tourke
I have a Chinese pit bike similar to yours but it’s the Apollo Rfz 125 and I ordered the same air filter
StaggSZN nice dude
I’m from Texas let’s go
What did he spray on the air filter? Thanks.
I’m pretty sure that’s a crank case breather if the crank case gets to much oil pressure it will push some through there and burn it in the engine it’s more eco friendly
U got to oil both parts of the air filter
Do you just buy regular gas for this dirtbike or premium?
Police#3 non ethanol gas, best for the carburetor
@@Bataha just so you know ethanol gas is good to use still but just don't let it sit.
What’s up man I just got this bike yesterday and it was running smooth and nice when i got it and it needed some oil because it was low so i got some 10w40 and put too much and the bike started to bog and bits of blue smoke came out of exhaust then i drained that oil and got fresh oil in there(the right amount this time) the bike is fine now but it’s still bogging when in high rpms and i have already gave it a carb clean and it has fresh 93 gas in it i need some help if u have any ideas?
oil definitely got into your carb. Check your carb seals. after that, check the exhaust seal and muffler. Then engine seals. something could've gotten burnt up.
is that bike 1 down 3 up or 1 down 4 up
How did you get a manual transmission on a tao tao I can't find them anywhere
jacob Beach wdym, they are all manual, the 110cc has a 3 speed but no clutch
Thanks for the info but quick question what gas octane should I use in it and how often do you change oil
Use 91 octane and if it’s brand new change the oil after the first 3 hours of easy riding no high rpms and then wait for it to cool down, change the oil, should only need 1 full quart, and do that about 2 more times to finish breaking it in. After that just change it maybe after 4-5 good rides on it you could probably go longer but with dirt bikes I think you should change it relatively often.
@@connorgunion8597 87 with 10W40 or 15W40 works fine
should i get a 125 tao tao 2018?
Have you removed the governor on her? If that thing could cruise smoothly at 55-,60 that'd be perfect
Wheres that at
Could we put a speedometer on the bike
Bharath Xrays yeah you can
Your left leg looks kinda tight on the filter??😐
Will it work on a db 27?
Great video
I was wondering if you knew how to fix the bike bogging when given throttle any faster than the rate at which a turtle crawls 😅😂🤣😂
If you try to accelerate quickly, from dead stop, or while cruising, it immediately bogs and tries to die unless I let off the throttle. Ive adjusted the only screw on the carburetor as best I can and it doesn't get any better...
I'm sure its something simple, but it's legitimately brand new and I don't feel like pulling the plastics off just to get the carb out to not know wtf to do LOL
Its like 20% rideable as is... good for a kid... terrible for me LOL
Its done this since I got it running (changed oil before I even started it.) So I'm at a loss at this point lol
Master AF What gas are you using? Use non ethanol gas and that should free up the bogging. If you are already using non ethanol gas then you may need to clean out your carburetor or get a new one. You don’t have to take off the plastics to get the carb there’s just the front pipe you take off by 2 screws and you air filter is on the other side held on by a clamp. Hope this helps if you try this and still have problems dm me on insta.
@@Bataha I agree. Mine stopped almost all bogging when I switched to non ethanol. I thought it being broken in was it, but now I'm convinced you are correct.
Did you have any problems from that pipe that went to the old filter ?
The breather hose that came from the engine?
I just tucked that away and it's fine.
@@Bataha i looked it up and it comes from the crank case it said to put it in a good place where dirt can not get in it or els dirt will go in the crank case
Yeah I tucked it into a part in the frame so dirt won’t get in it
U really think a airfilter is gonna make a difference I mean I ran a 212 before 3years with the nibbi black an yellow filter I take it off don't see no difference with it on or off cept for the metal cone filter does restrict the flow
what speed difference do you get when changing from the stock carb
maybe +5 mph I am definitely going to upgrade my carburetor next and do a top speed
@@Bataha Some of the aftermarket carbs have the same jets installed. The good thing is. They are easier to take apart and change the jetting. That should give you more power.
For sure
What is legal in California?
All those little kids def makes a big difference.
Will it fit db14
Love your videos
Thank you
@@Bataha just because of you i will buy the taotao, what would you rate the bike out of 10
@@TA-fy5gd Sweet bro! I'd give it a 9
@@Bataha thank
I'm just putting a little bit of oil on my sponge uni sponge and get oil filter cleaner
Bro you talked me into buying one I just bought it today one question do you mix the gas
No that's for 2 strokes, you just put non ethanol gas in this one
Thank you I just ordered it today I'm a atv person this is my frist bike i got because of you I'm excited thank you for answering my question
Yeah man you’ll have a lot of fun
Just got a call it be here in 8 to 12 days
@@alysha6923 niceeee dude
try tuneing the fuel mix up a tad...might be running lean now youv added more air to the mix 🇦🇺🇺🇸🇦🇺🇺🇸
maby get some advice from the web before addingfuel ..I'm no mecanic👍
What is that app on your phone
Speedometer from the App Store
Is that left hand lever your clutch or your brake? I can’t tell bc of the foot pedal brake that is on a lot of these
bcwellons left is clutch, right is front brake. Down by my right foot is rear brake
Would you recommend this bike
yeah
@@Bataha thanks
Website says only 37 mph? Why would they under advertise?
don't ask me idk lol
Bataha I’m just glad it’s that fast lol
@@SubPar_MX same
How do you change and add coolant
faded mook this bike is air cooled so it only needs oil, I made a video on changing the oil.
That is good just for a air filter
If you want to know why the speed is faster and slower sometimes it because the speedomeeter on a phone is not accurate
True but, out of all the times it still showed 1-2 mph gain for most so I'd say it makes it a little faster. Not a perfect test, there is alot of room for error.
I have a DB17. Acoording to my phone app it says 52 mph . I am about 165 lbs. I have a uni filter, it is the shorter one with an angle.
MayBeSo nice, I’m only 130lbs so that’s weird
@@Bataha I think after it was broken in it was a bit faster. I also pulled out that baffle or screen in the exhaust. So maybe the uni filter and no screen in the exhaust makes a difference.
MayBeSo my screen for the exhaust broke off along time ago. Maybe your carb is better.
Put a 16 tooth on the front sprocket for more speed
It depends if you are going to the east or to the west, you will always go faster if you go to the east because earth is rotating that way
Bro logic you have 1000iQ
nigga are u capping
I wanna buy one but I’m 13 and don’t have a job. Better get back to mowing lawns 😂
Yep! That would be a great way to earn money to get one. Good luck man
I made 700 from mowing grass keeep it Up all I need to 150 more almost their
stepdad looking at one to get me... been wanting a bike for years now. hope i get it, especially since google said top speed was 37 haha
the 2 dislikes are people who only spend 1000s of dollars on name brand bikes
The Danester sweet man, haha yep
Better to spend money on a branded bike though
How did you get the bike? Do they send it to you?
Shipped straight to my door
@@Bataha where did you buy it from? I can’t find this bike on sale ANYWHERE and it’s annoying. It’s almost like everyone bought all of them or something
@@matthansen8693 Got it from amazon the bike had been out of stock for a few months
@@Bataha dang alright thanks for the information!
i have fusion 125cc and it goes 55mph
App name
4 strokes have a lot of engine braking and the bike isn’t allowing you to go any faster than the engine
its true, If I wanted noticeably more speed I'd need to change the sprockets
@@Bataha I think he's talking about the Governor. It limits Revs. Pretty sure this engine is governed
Yea is worth it, knowing your bike is a little faster for $20 and is reusable.
Hey I was wondering if this bike would be a good starter bike?
Definitely! You should get it
Bataha Thanks
Where u from
I made A sandwich Texas, you?
U know when u wheelie like that it makes ur frame crooked ...trust me I have a friend who was practicing to wheelie on his and he sent it to garage to sevice it and he was told his frame was bent...especially they chinese bikes
Straight Up it is what it is I’m surprised my frame is still holding up with the full sending
@@Bataha understood. Safe riding..😛😛😜
Yup i had a coolster 4 wheeler and the frame split in half lol
Elian Castillo weld it back? 😂
it s beacause the wind
You need a better carb asap
It was a slight downhill , you were slower cause the engine , pistons need compression back for the combination be able to push the pistons further faster.if it makes sense.
Your suspension is very stiff
It’s a Chinese so the suspension is not the best.
Oh ok
Talk to much not enough ridding