I got that kind of alarm clock sitting in the garage but she's hibernating for winter in a '69 Roadrunner body :( plus only a souped up 440 not a hemi like this one :P This alarm clock is only good May through the first salting in November, buyers beware! LOL!!!!!!!!!!!
What an absolutely glorious idle and sound. Absolutely legendary. Tree hugging Prius drivers will never understand and frankly I don't care. This is music.
Believe or not, some Prius drivers actually have class and the only issue is they have trouble paying high gas bills... There is a friend of mine who has a 2019 Prius Prime and a 1969 Chevelle 454, he saves in one to fund the other...
@@masonite1973 Well, no one ever said life is consistent. Plus, a Prius is so bad that it makes the Chevelle so much better each time he takes it out again. The cuisine is most satisfying after a period of starvation.
Nice Hemi! Would you help out with some questions please? Part number for the cam please? Is this a flat tappet or roller? Your thoughts on the Edelbrock heads, intake, and carbs? Whos rocker gear did you use? Any more vids of this motor? Thanks and keep the vids coming - great stuff!
Probably 11" clutch n a 40lb flywheel in that can.A-833 4spd trans was so tough not only Chrysler pro stocks used them,most of the Chevy( Grumpy too!) guys used them.Dana 60 series rear ends too.
Most 4 speeds are that small. You can bench press them in and out. Any askholes know how to use google? If you really wanted the specs youd have done it.
this is awsome , perfect or one oft the best unblown , untunnelramed only carb engine 426 hemi sounds ever ! this in a car with full 3" exhaust muffler spintech pro street 9000 , and all is perfect !!
I made the gauge/ignition mounting post and the radiator mounts removable. This allows me to be able to roll it under a car and easily install the motor from underneath. That is by far the easiest way to do it. B/RB engines give you tons of room. A Hemi is a tight squeeze but still much easier to come up from underneath than from up above.
@@gordocarbo So, you didn't happen to watch the dyno test where they kept enlarging the exhaust and the larger it got the more torque and HP it made, think it was BB chevy. If I was running a BB anything it would for sure have a 3.5-inch exhaust. My little 340 with a 270H comp cam, which is smaller than the stock cam, likes open headers with a 3.5-inch open collector with no extension for goodness' sake, and it does hurt the performance when you hook the exhaust system back up. In fact, it is in my CJ5 now with shorty headers with 2.5-inch outlets running two 2.5-inch pipes into a Flowmaster muffler with two 2.5-inch inlets and two 2.5-inch outlets and it certainly restricts it, no room for long tube headers between the frame rails.
will the factories that mine lithium and build electric cars pass an emissions test? will the factories that create power to charge electric cars pass an emissions test?
that sound should be our national anthem
Amen
LMAO 🤣 Definitely!!!👌👍💪❤️
DAMN RIGHT!!!!
Would you call that a cackle, or a rumble? Hemis always sound best with a bit of cam.
Shit, I could listen to that all day!
Great sounding engine,,,, thank you for not filming 5 minutes of bullshit before getting to the point.
If my alarm clock sounded that good I’d never be late to work.
False, you will be laying there enjoying the sound then be late because your were idling around. Pun intended.
@@heathbauerle2787 that's when you put one in your ride, to make up for lost time!
I got that kind of alarm clock sitting in the garage but she's hibernating for winter in a '69 Roadrunner body :( plus only a souped up 440 not a hemi like this one :P This alarm clock is only good May through the first salting in November, buyers beware! LOL!!!!!!!!!!!
@@joeschmo9838 how much does that alarm clock cost? Will a maxed out $25 gift card and a 24 pack do?
I bet if your car sounded like that you’d never be late for work
I want them to play this at my funeral
Don’t you mean you want the installed in your casket....
i think the wheels are a little small for that chassis...
John Becay yea he can forget about traction
I'm glad as of right now there are no dislikes
😆 i agree
@@KickRox710 1 dislike per year since.
LMFAO!!!!!
What an absolutely glorious idle and sound. Absolutely legendary. Tree hugging Prius drivers will never understand and frankly I don't care. This is music.
Believe or not, some Prius drivers actually have class and the only issue is they have trouble paying high gas bills...
There is a friend of mine who has a 2019 Prius Prime and a 1969 Chevelle 454, he saves in one to fund the other...
@@fortcrafterbossbehold9027 He must feel shame and pride at the same time. lol
@@masonite1973 Well, no one ever said life is consistent. Plus, a Prius is so bad that it makes the Chevelle so much better each time he takes it out again. The cuisine is most satisfying after a period of starvation.
Can you imagine how cool it would be to pull up next to a Prius or a Tesla with that engine belching out the hydrocarbons and rattling the fenders?
HEMI. The original American Idle.
Yes, and also the original #1 all American badass
Dang I already gave your comment a thumbs up.
1st muscle car was the 54 coronet 500 pace car hemi powered
Pure American muscle
idk i kind of like ford sohc
Hell to the effin' yeah! ☻
I need one as a white noise machine in my bedroom. My god the amazing dreams I’d have
You got that right, that badass does thump, and hard
well done. Absolutely amazing sound. Lee Greenwood
Music to my ears. Thanks
I thought porn wasnt allowed on youtube?
Ohh man!!!!!! That sounds so friggen perfect!! I LOVE TO HAVE THIS IN MY 68 CHARGER, WITH A BATHTUB NASCAR INTAKE!!!
this is just menacing
I need that for my alarm clock in the morning. That'll make me get out of bed!
Oh how sweet the sounds!! I can almost smell the Avgas from here! Whatcha putting in?? Say Dart please!!!!?
how could anyone give this a thumbs down
They drive a honda
Yes, and you could never get Honda with a fart muffler to sound like that !!
If your car has this engine in it, please give me your address, leave the key in it tonight, and leave it unlocked. Thank you.
The most heavenly sounding thing in the world right there ! Dam I want one !
Yep that's the sound of a bad ass engine.
Would you remember what you degreed it in at if I may ask? Got this cam on order to replace my comp 278H-8
Now put that Hemi in a 68 Cuda/Dart and go kick some ass🇺🇸❤️🔥
That's a beautiful sound 👍
I LOVE that there is a 4 spd bolted to it!!
Direct Connection....... Friday and Saturday nights
Nice Hemi! Would you help out with some questions please?
Part number for the cam please? Is this a flat tappet or roller?
Your thoughts on the Edelbrock heads, intake, and carbs?
Whos rocker gear did you use?
Any more vids of this motor?
Thanks and keep the vids coming - great stuff!
I like the way EVERYTHING in the shop is shaking during this... damn that sounds good.
Is the vam Beethoven Symphony
Is wonderfull this sound
Put that in a 1964 Polara and im gone!!!
Great power to weight ratio there kiddo
Music!!
This is Music to my ears
Sounds angry ! 👍
music to my ears
You've really gotta feel bad for that poor transmission......
Jesus christ. That is a whole lot of bellhousing and not very much transmission.
Chrysler magic my friend. They crammed a lot of transmission in not a lot of space lol.
Probably 11" clutch n a 40lb flywheel in that can.A-833 4spd trans was so tough not only Chrysler pro stocks used them,most of the Chevy( Grumpy too!) guys used them.Dana 60 series rear ends too.
Chrysler 4 speed
that is the toughest 4 speed ever built.
I have the same 4 speed in my 82 d150
That thing sounds badass, just sitting there idling...
I always thought that intake looked so cool.
Hemis sound different....deeper thump
That's a thing of beauty :)
Sounds like a top fuel dragster
Most 4 speeds are that small. You can bench press them in and out.
Any askholes know how to use google? If you really wanted the specs youd have done it.
Those hemi's got more head than they have body. Where's the block?
this is awsome , perfect or one oft the best unblown , untunnelramed only carb engine 426 hemi sounds ever !
this in a car with full 3" exhaust muffler spintech pro street 9000 , and all is perfect !!
Music of the Gods
Classic muscleeee😬😬😬😬😬😬😬😬😬😬💪💪💪💪💪💪💪💪💪💪💪💪💪
Please Please, what is the comp cams part number of your 426 cam??
Sweet
Sounds like baby eagles hatching!
😮😮😮😮
Sounds very nice!
🤤
Lots of valve overlap. This is the sound of the American Gearhead.
and also torque bkowing right out the tailpipe unfortunately
I've watched this vid. A bunch of times, but just now noticed how cool your engine run stand is. Gonna copy one for myself!
I made the gauge/ignition mounting post and the radiator mounts removable. This allows me to be able to roll it under a car and easily install the motor from underneath. That is by far the easiest way to do it. B/RB engines give you tons of room. A Hemi is a tight squeeze but still much easier to come up from underneath than from up above.
spridenour01 for sure...i have an extra BB k frame i was going to toss, but I'll gonna make a stand instead. About how long and wide is it?
Are those glasspacks between the headers and turndowns?
How I always remembered that sound from 6 yo to now
Sweet 🇺🇸
Sounds like a coffee can full of rocks.
Wow
Thats one mean sounding elephant
And just think, a turbo charged Kia can blow its doors off....
LOL you Funny
Just think....a Kia, every high school girls dream.
Ahh, the song of my people!
Dam that's a DEVIL IDLE. JUST MEAN
I love that chop......
Whats the specs on the cam ? How much lift on the intake and exhaust? How much duration?
It’s the Mutha’ Thumpr 235/249 Hydraulic Roller Cam. Comp has the specs listed on the site.
Hell yeah
🦍🐘🦍
I'm diggin it !!
Ive never heard a better sound
@wheels turn actually this is the 2nd best sound I've heard thanks for making me rethink this dumb comment lol.
Very nice sounds great
ITS GOTTA BE VOODOO BABY,PLYMOUTH WINS YOU OVER
Scream it want some ice 🍦 cause you kno what it is put a seat and let's go bro wanna go bro let's go bro hehehehehehe
426 musica
Nice pistol grip, hey you have some questions down below why don't you answer them?
If there is a sound sweeter than that, I've not heard it.
She sounds healthy the cam lope to.
Nice that is a Sweet Sound to my ears
I have my headphones on...symphony
Hope you ran a 3.5-inch exhaust all the way to let that puppy breath.
doesnt need that big of an exhaust
@@gordocarbo So, you didn't happen to watch the dyno test where they kept enlarging the exhaust and the larger it got the more torque and HP it made, think it was BB chevy. If I was running a BB anything it would for sure have a 3.5-inch exhaust. My little 340 with a 270H comp cam, which is smaller than the stock cam, likes open headers with a 3.5-inch open collector with no extension for goodness' sake, and it does hurt the performance when you hook the exhaust system back up. In fact, it is in my CJ5 now with shorty headers with 2.5-inch outlets running two 2.5-inch pipes into a Flowmaster muffler with two 2.5-inch inlets and two 2.5-inch outlets and it certainly restricts it, no room for long tube headers between the frame rails.
Absolutely awesome 👌
PERFECT!!!!!!
What a mill. She’s a beauty.
nice and cool ! just like mine .
and suddenly everybody in a 10 foot radius are now deaf.
What muffler is that? Sounds awesome.
Pachyderm power
Lol. Those Motha Thumpr cams are the bananas.
Cant stand them, very inefficient but guys get sucked in by an idle sound
Music to my ears!❤️❤️❤️
What mufflers are those? Awesome video!
Just a pair of shorty glass packs.
Sounds rowdy
Oh hell yea
Damn!!!!😍 😍 😍 😍 😍
Sounds great.
That's a small Trans
Dayyyuuummm
Sounds great but will it pass an emissions test?
Nice troll
When you have a hemi you don't care about emissions so much. You just smile.
will the factories that mine lithium and build electric cars pass an emissions test? will the factories that create power to charge electric cars pass an emissions test?
@@frigglebiscuit7484 I drive a HEMI! I don't care how much it emits.
Can someone tell me what headers and tips he has on that? Im building a hemi and want that same set up
3 inch TTI headers with glass packs and O’Reilly turn down pipes
Where do you sit ??