9 months later and this video is still helping people! Thank you for making this so easy! Even I, who had no idea what I was doing was able to do this! THANK YOU!
Thank you so much! With your tutorial I significantly decrease the coil whine and finally now I can just hear the noise from the fans. Awesome! Your are the best!
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!
At 2850 Mhz for the 975 mv the rest of the curve nodes were off the top of the chart and I couldn't select them to flatten the curve, lol. This worked though so thank you! I have to push them twice though, incase anyone needs that.
Don't do like this!!!! May be it is just my situation, but if u flat your curve with ctrl+shift msi can sometimes change your curve automatically (you can have some curve "stairs" at the end). So to be sure just drop your marked zone down and then apply it to let msi afterburner flat it by yourself. I have rtx 4070 super gaming oc gigabyte
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!
Very good video, thanks. I used this method for my KFA2 4070 Ti Super, now it draws around 35W less and the temperature is 5°C lower than before the undervolt. Good enough for me! Thanks again for the great tutorial sir.
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!
Thank you very much, I've had a power consumption decrease of 50W in RDR2 and about 15 degrees (celsius) temperature decrease while having a more stable framerate. All that with your basic setup, so thanks that was easy :)
You are the GOAT. I was getting 74-6c playing Final Fantasy 16, I've gone with your first performance profile and now I'm at 64c getting the same performance. Fans are already way better. Thank you Sir
Thanks for this! Playing space marines 2 and from my comparisons I gained a couple frames (3-4 on average), my consumption went all the way down from 220+ down to 160-190 watts and the temperatures are at least 5 degrees lower. I'm very happy and you earned my like!
I followed your guide for undervolting my 3070 with great success, and now for my new 4070s this guide is once again a big help! About 40W less consumption than my 3070, better performance and I still have to hit 70 degrees C even under heavy load!
This is soooooooooo perfect! I got the Zotac one 2 fan and my presets that perfectly work are: 975mv at 2650MHZ with +500 on the memory With these i was able to archieve MAX 80c playing Alan Wake 2 With RT at low. You are the best!!! Thanks for all the tutotials!
I settled on your first preset since I need power saving and works like a charm. Helped me when I got the 3060 back then, and helped me again when I got my 4070 Super. thanks a ton. btw I settled on a ryzen 7 7700 as my cpu since 7800x3d is really out of reach right now. I might check if your channel also have under volt for this to help on temps since I have an ITX pc. Again, big thanks 👌
I undervolted my GPU using your guide and it was very concise and helpful. Instantly 5°C lower on average, with the GPU hotspot dropping 10°C, power draw is lower, and the fan speed dropped from 60% to 48% which is much better on the ears!
Do you have 4070 super asus dual? i want to buy this for my 3d heavy pretty projects. i wonder if the temp is high or not? bcuz it fits my budget. if it goes too high temp, i should wait 3 month to get a 3 fan.
Bros helping me out once again. Used this guys older video for my 3070. Used the 4090 one for my 4090 a while back. And now used this one for the 4070 pc i just built. All to reduce the horrible coil whine. Its so good at reducing the coil whine with no performance loss
U really are my savior, my 4070s inno3d x3 oc is 84 celsius degrees in tower 300 case and after I apply 2550mhz 900mV and now is just around 60 degrees with 2/3 power consumption ( ~145w vs 215w stock ). Again, THANK YOU VERY MUCHHHHH
@@user-fo9ce3hr5h Well, if you check reviews of this Inno card you will see that 84 C is normal for this card. Now everyone have Aorus, Tuf, Trio or Panthera tho.
@MinhTran-6j6ic same here, my 4070s inno3d x2 also 84 celcius by default when playing triple A games in mini itx case. i followed your settings and it works same as yours thank you so much
just undervolted my 4070 super gigabyte windforce oc. max temp is now 59-60c from 68-72c and gained few more fps as well. even with ray tracing/path tracing on and 100% gpu load the card is almost silent. very very happy with this card so far. upgraded from a 3070 standard (that was a good card also).
@@philiphansen1103 i fear the triple fan would fit in my tiny case, or not... the one i am looking is like way too long. also, dual fans are bigger than triple, have huge thick heat sink fins+consume less overall wattage, while compromising on fan noise. its a trade-off one way or the other.
What did you end up undervolting to? That’s the card I’m waiting to buy atm and I’m trying to see what people are setting for their afterburner settings
@@deepak_nigwal I have a dual fan version (MSI Ventus) since a bigger card won't fit in my small PC, but the first results (after undervolting) are very promising: about 37 degrees when idle and max 65 degrees under heavy load (100% GPU and ray tracing etc). Because the card runs relatively cool even my CPU is now 10% cooler.
2640Mhz/900mV works (so far) :) thanks for the video. Fun to see that performance drop from 2750Mhz/975mV is minimal, less then 2,5% for -5% Mhz and -7-8% temperature.
Amazing tutorial, thank you very much! I have the same card 4070 super 2X Ventus, and it helped a lot. I got 11% boost in fps for Cyberpunk 2077 (from 55,69fps to 60,71fps) on 1440p Ultrawide. Also consumption went from 212W to 191W and temperature went from 69°C to 67°C.
Thanks for this guide. My 4070super MSI Ventus2x OC works perfectly on 0,95v 2700mHz core and memory +1600. Max temp was 66 degrees in Avatar:Frontires of Pandora on max settings, DLSS off, 1080p with average FPS 70-75 (FG off).
Thanks brother you literally saved my GPU idk why but my gigabyte oc edition GPU at stock settings was running fans at 100% and showing no display underload but your settings saved my GPU can't thank you enough ❤
Thanks a lot, made 3 profiles, 2600 mhz 0.9 2750 0.975 and full clock at 1 volt. But really thanks for both the presets and the tutorial on how to find my sweet spot.
I want to thank you; your advice helps me save 60W of electricity. At first, I considered buying an AMD GPU because it’s slightly cheaper and 10-15% more powerful, but it uses 100W more power. Even with undervolting, it matches the 4070's stock power usage. Choosing NVIDIA was an easy decision for me.
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!
Ahahahah I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials
lets go !! best content as always ma man ! My zotac twin edge oc 12gb very stable 975mv at 2805Mhz with +1600 memory clock. 3dmark port royal stress test 50 loop smooth like butter,CP 2077 max setting with path tracing no crash . -20w than stock ,+ 10% fps performance ,and 71-76c temp. Thanks mate !!
Bruh, I VERY rarely leave a comment on youtube but this was so simple to follow & worked perfectly for my ASUS 4070 Super Dual OC GPU. I'm using your preset 2 and it's only about 50hz lower than my GPU was boosting to on stock settings while running 8-15c cooler & my power usage under load went from like 212w to roughly 160w... almost a 25% decrease in power usage!! Even my Hotspot temp dropped a decent amount :) Thanks a bunch for this, dunno if you'll see this since 4 month old video but wanted to let you know its still helping peeps! Cheers, liked n sub'd Edit - Forgot to mention it brought my 3DMARK TimeSpy score up 19803 from 19339 & my Steel Nomad score up to 4969 from 4608
Hey, I just got this GPU and I’m about to undervolt it. How has the undervolt held up and what’s your boost score? I have an Asus 4070 super dual OC Evo. I’m not sure what the differences between the evo and non-evo.
@@kkmcgamerI also have Asus 4070 Super Dual Evo and it's the worst card I ever had. Hot, loud, only 2670mhz boosting... The case is Lian li lancool 216 with bottom and external fans mounted. The airflow is no problem at all.
@@Prorayque it’s such a garbage cooler, i thought it was the same like the regular dual but it’s so much worse. Without my undervolt it will probably be at like 70-75c with the fans screaming at 2000-2300 rpm. I honestly might try and complain to Asus and try and fight for a replacement regular duo version because there is no mention anywhere that the coolers are this different. I’m also using a msi mpg gungnir 300r airflow and airflow is definitely not a problem, I even added 2 intake fans below the gpu and they barely made a difference. Did you end up returning the card?
@@kkmcgamerI also noticed that the bottom fans (140mm Arctic Cooling P14 Pwm PST) as intake didn't make a difference, maybe 1-2c and I find that quite disappointing. Not sure what I'm going to do, probably gonna sell it and than buy a triple fan card. Gaming X, Asus Prime, Tuf gaming, etc. Dual fan never again.
Hey, I noticed that the undervolting method that you use for 4000 Series cards is different than the undervolting method you used for 3000 Series card (such as the 3070 undervolt video). What are the differences between the two methods? Is It safe to use this method even for other cards?
Because rtx 40 series is stubborn sometimes, i tried undervolt my 4070s with old method it doesn't work, after i hit apply it only work for few seconds but after that my gpu frequency and voltage increase above the undervolt preset
Very good point! RTX 4000 behaves differently when it comes to effective clock. The method used on RTX 3000 I deem a bit superior actually, because you have absolute stability on the lower end of the curve. But it would lose you clock on RTX 4000, so we can’t do it. But in the end, they’re basically the same really :)
@@ImWateringPSUsJust curious. Did you learn this from trial-and-error experiments? Or, is there a way to estimate the result depending on the architecture?
Friend, an important question that I remembered at this moment, you talk about efficient undervolt, and in performance, the graphics card doesn't heat up? What temperature does your GPU reach in performance? TKSSSS
@@ImWateringPSUs nah the 4080 series screams belt in my book, i have the money but my parents wouldn't approve it, therefore im picking either the 7800XT or the 4070S, for the long run sure the 7800XT wins but i do intent on hopping on the 3d game dev stuffs. unless amd decided to shit on cuda i think the 4070s is the way to go no?
@@ronwladyka8127 I settled on 2730Mhz on the gpu and +1900Mhz on the vram and that has been 100% stable for a couple months now. I've seen as high as 75C when playing Star Wars Outlaws but it's usually right around 70C. I'm playing Indiana Jones today on ultra settings with full RT and it's at 68C while using 100% of the gpu.
@@SnubBarracuda I have that same card, but 2700MHz and +500MHz on mem with 975mV was not fully stable when playing Indiana Jones and The Great Circle. Had few game freezes. Still trying to find a combo that works 100% of the time
Following these instructions with my Palit 4070 Super 2x I have crash problems in gaming with any undervolting preset, even the lightest. I crashed Cyberpunk, A Plague Tale, and The Last of Us. Sometimes it runs fine for hours, other times it crashes after 10 minutes, so I went back to the factory voltage and turned on a custom cooling curve.
Wtf you life saver i have a new build, my RTX 4070 super was getting upto 84c with a bit of coil whine was loud as hell now it wont go above 70c THANKS!
Finalmente qualcuno che ha fatto un tutorial semplice senza troppe informazioni inutili! Ti consiglio solo, dato che fai un video in inglese, di usare la lingua inglese anche nei menù di Afterburner.
I had recently purchased a 4070ti S dual OC and was tired of the temps pushing higher and higher, I went with 2625mhz for the clock, and the temps are so much better, paired a 5900x It's great
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!
I hate that everytime I search for undervolt GPU i fond you because you never show power usage GPU (watt) in your video then how tf we know that Undervolt actually work?
How come the guide differs from older 3000-series to 4000-series? Like you actually lower the core clock for the voltage before the 900mV on older cars, then spike it up to the overclock at 900mV, while you increase the entire curve up to the OC on newer? Just better new technique?
I can up my memory clock with +1000 or +1200 (saved and working) but when doing the voltage stuff (from 900 to 2550 or 950 to 2550 or 900 to 2450) my memory clock drops to 810 MHz? I am not sure what is going wrong….itbis a shame because the power dropped about 60w. Can someone please help me? I have a Asus RTX 4070S Dual and AMD Ryzen 9 7900 setup….
@@ZinhoLabs thanks for your reaction! Checked today and indeed it was on Normal! I have done it again and now it seems to be working. With undervolt (900 - 2550) and overclocked the mem (with 1200MHz) I’ve managed to reduce power with about 60W. But, in addition to this I’ve also set the max. fps in nVidia app on 120 (my screen is also on 120MHz in stead of 165MHz) what resulted in another 60W! So, my 4070S uses now about 120W less than before!
Hello friend, I would like to thank you directly from Brazil. This is a hot country and I was getting 75 degrees 100% on a 4070 super galaxy, It's still cold by his standards. but I chose to have a more comfortable temperature. with its profile it is a maximum of 68 degrees and 80 hotspot. thanks!
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials
Many thanks to you. I was able to get a stable 2820mhz at 1,000mv and +2000 on memory clock. I have the exact same card as you show in the video. I think I actually set it in the curve to 2822mhz, but in Cyberpunk it'll start at 2835mhz and after a few seconds drop to 2820mhz and stay there.
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
9 months later and this video is still helping people! Thank you for making this so easy! Even I, who had no idea what I was doing was able to do this! THANK YOU!
Thank you so much! With your tutorial I significantly decrease the coil whine and finally now I can just hear the noise from the fans. Awesome! Your are the best!
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!
It works! With your first preset, palit 4070 super dropped from 70-75 in warhammer to 60-65. No visible performance lost. Will test it out further!
I had the exact same!
Although i lost about 10-20 fps
I wanted to congratulate you on this video, it was very detailed and furthered my understand on how to use MSI afterburner.
you can also flat the curve by pressing ctrl+shift +enter
Very true! Thanks for the comment
@@ImWateringPSUs Thanks for this, I couldn't get the curve to flatten the other way :)
At 2850 Mhz for the 975 mv the rest of the curve nodes were off the top of the chart and I couldn't select them to flatten the curve, lol. This worked though so thank you! I have to push them twice though, incase anyone needs that.
how, I am pressing it and it just allows me to put manually the value. I f I press enter it puts it flat but when I apply it it goes curved againg 😣😣
Don't do like this!!!! May be it is just my situation, but if u flat your curve with ctrl+shift msi can sometimes change your curve automatically (you can have some curve "stairs" at the end). So to be sure just drop your marked zone down and then apply it to let msi afterburner flat it by yourself. I have rtx 4070 super gaming oc gigabyte
Awesome! Just the basic undervolt is amazing! Even the more aggressive settings, so far so good! Thanks! :D
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!
Very good video, thanks. I used this method for my KFA2 4070 Ti Super, now it draws around 35W less and the temperature is 5°C lower than before the undervolt. Good enough for me! Thanks again for the great tutorial sir.
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!
Thank you very much, I've had a power consumption decrease of 50W in RDR2 and about 15 degrees (celsius) temperature decrease while having a more stable framerate. All that with your basic setup, so thanks that was easy :)
You are the GOAT. I was getting 74-6c playing Final Fantasy 16, I've gone with your first performance profile and now I'm at 64c getting the same performance. Fans are already way better. Thank you Sir
Thanks for this! Playing space marines 2 and from my comparisons I gained a couple frames (3-4 on average), my consumption went all the way down from 220+ down to 160-190 watts and the temperatures are at least 5 degrees lower. I'm very happy and you earned my like!
The best video tutorial about undervolting-Overclocking i have seen in centuries! thanks mate
I followed your guide for undervolting my 3070 with great success, and now for my new 4070s this guide is once again a big help! About 40W less consumption than my 3070, better performance and I still have to hit 70 degrees C even under heavy load!
This is soooooooooo perfect!
I got the Zotac one 2 fan and my presets that perfectly work are:
975mv at 2650MHZ with +500 on the memory
With these i was able to archieve MAX 80c playing Alan Wake 2 With RT at low.
You are the best!!! Thanks for all the tutotials!
It still too hot even after undervolt, so without undervolt it can reach 90c++ ??
I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel!
same. zotac edge 4070S 2700Mhz 0.985V.
@@Pty101 also set a fan profile in msi afterburner for more agressive fan.
925mv at 2580 with +500 at memory
This guy us awesome! His videos might have saved my new gpu and cpu!
I settled on your first preset since I need power saving and works like a charm. Helped me when I got the 3060 back then, and helped me again when I got my 4070 Super. thanks a ton. btw I settled on a ryzen 7 7700 as my cpu since 7800x3d is really out of reach right now. I might check if your channel also have under volt for this to help on temps since I have an ITX pc.
Again, big thanks 👌
Liked and subscribed. Went with 1v at 2880 core +1200 memory and my AI training workload is running stable at 73.1C max with 184.6W max power draw.
how's the stability of your GPU right now after 3 months of usage? what's your the GPU Memory temperature?
Finally got it working! Thanks for your video and explanation!
I undervolted my GPU using your guide and it was very concise and helpful. Instantly 5°C lower on average, with the GPU hotspot dropping 10°C, power draw is lower, and the fan speed dropped from 60% to 48% which is much better on the ears!
Do you have 4070 super asus dual?
i want to buy this for my 3d heavy pretty projects. i wonder if the temp is high or not? bcuz it fits my budget.
if it goes too high temp, i should wait 3 month to get a 3 fan.
@@user-fo9ce3hr5hI have a 4070 super Gigabyte Windforce OC, so it has three fans. It’s still worth a shot to undervolt and see how you like it.
Bros helping me out once again. Used this guys older video for my 3070. Used the 4090 one for my 4090 a while back. And now used this one for the 4070 pc i just built. All to reduce the horrible coil whine. Its so good at reducing the coil whine with no performance loss
U really are my savior, my 4070s inno3d x3 oc is 84 celsius degrees in tower 300 case and after I apply 2550mhz 900mV and now is just around 60 degrees with 2/3 power consumption ( ~145w vs 215w stock ). Again, THANK YOU VERY MUCHHHHH
what do you use of your gpus that goes to 84 celsius?
@@user-fo9ce3hr5h Well, if you check reviews of this Inno card you will see that 84 C is normal for this card. Now everyone have Aorus, Tuf, Trio or Panthera tho.
@MinhTran-6j6ic same here, my 4070s inno3d x2 also 84 celcius by default when playing triple A games in mini itx case.
i followed your settings and it works same as yours
thank you so much
Hve the same GPU with 3 fans. no matter what curve i apply the watts keep the same, i think my gpu i faulty or something.
@@Nerven86 the problem is pc case, I've changed mine and now the gpu temp never reach 70 celsius degree with defaut setting
this is far the best undervolting tutorial.. Congrats !!
Thank you a million times bro not all heroes wear capes !
There is no such thing as a 'preset' for undervolting, downclocking, or overclocking. It depends on your silicon quality aka silicon lottery.
just undervolted my 4070 super gigabyte windforce oc. max temp is now 59-60c from 68-72c and gained few more fps as well. even with ray tracing/path tracing on and 100% gpu load the card is almost silent. very very happy with this card so far. upgraded from a 3070 standard (that was a good card also).
you have the dual fan version? or triple fan?
@@deepak_nigwal triple, always go triple
@@philiphansen1103 i fear the triple fan would fit in my tiny case, or not... the one i am looking is like way too long. also, dual fans are bigger than triple, have huge thick heat sink fins+consume less overall wattage, while compromising on fan noise. its a trade-off one way or the other.
What did you end up undervolting to? That’s the card I’m waiting to buy atm and I’m trying to see what people are setting for their afterburner settings
@@deepak_nigwal I have a dual fan version (MSI Ventus) since a bigger card won't fit in my small PC, but the first results (after undervolting) are very promising: about 37 degrees when idle and max 65 degrees under heavy load (100% GPU and ray tracing etc). Because the card runs relatively cool even my CPU is now 10% cooler.
2640Mhz/900mV works (so far) :) thanks for the video. Fun to see that performance drop from 2750Mhz/975mV is minimal, less then 2,5% for -5% Mhz and -7-8% temperature.
First preset set me off by 65W and 5-6c degrees, really helpful, thank you.
Just upgraded to a ASUS Dual EVO OC 4070S and your vid was just what I needed!
Electricity is getting out of hand here in EU.
Awesome video got me a 10% improvement on my 4070 super
What numbers did you go with?
@@camy252camy3 975mV and a 2750 core clock
Thanks a lot :) my gpu temps decreased a lot and fps quite improved
FINALLY I FOUND SOMEONE THAT EXPLAINS IT CLEARLY
Amazing tutorial, thank you very much! I have the same card 4070 super 2X Ventus, and it helped a lot.
I got 11% boost in fps for Cyberpunk 2077 (from 55,69fps to 60,71fps) on 1440p Ultrawide. Also consumption went from 212W to 191W and temperature went from 69°C to 67°C.
thanks my graphic card heats up 80° / 85° before and now with your undervolt my graphic card is high limit 70°/71°
great job
Good tutorial thank you very much, saved me the headache of googling for hours.
Thanks for this guide. My 4070super MSI Ventus2x OC works perfectly on 0,95v 2700mHz core and memory +1600. Max temp was 66 degrees in Avatar:Frontires of Pandora on max settings, DLSS off, 1080p with average FPS 70-75 (FG off).
Thanks brother you literally saved my GPU idk why but my gigabyte oc edition GPU at stock settings was running fans at 100% and showing no display underload but your settings saved my GPU can't thank you enough ❤
Mate... you are a god!!! I had overheating issues with the new PNY 4070 Super hitting up to 90C.. it just went down to peak 70C!!! Unbelievable!!!
Is it a triple or dual gpu?
@@crad5476 I have dual fan 4070 super, and hitting 83C in games like cyberpunk and warhammer 3 total war.
@@tomislavkorman7417 my triple fan 4070S is at 70° absolute max in those games and 60° other games. That extra fan does wonders.
@@crad5476 yeah, probably. I just undervolted it and temperatures are lower 10-15C with same performance, so i am happy.
PNY 4070 super here also same issue, doing the first setup in this and it does not go above 70c
Thanks for this! Gained more performance and lowered the temp by 9-10 celcius! :)
everything was super done exactly on the rtx 4070 super palit dual, the temperature was 77, it became 66 definitely like and subscribe.
So simple and informative!!! Thank you
Thanks a lot, made 3 profiles, 2600 mhz 0.9 2750 0.975 and full clock at 1 volt. But really thanks for both the presets and the tutorial on how to find my sweet spot.
Extremely helpful, thank you!
Thanks for this video. I suck at this kind of thing and this video is very simple and easy to follow. Easy subscribe
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback and really thanks a LOT for the sub
Helped a lot
I want to thank you; your advice helps me save 60W of electricity. At first, I considered buying an AMD GPU because it’s slightly cheaper and 10-15% more powerful, but it uses 100W more power. Even with undervolting, it matches the 4070's stock power usage. Choosing NVIDIA was an easy decision for me.
Not only do AMD GPU's consume much more power while gaming, they also sit at like 40 watts on idle on desktop, compared to the 5 watts of the 4070S
Thanks. You are very good at explaining clearly!
You’re way too kind, thank you!
That was really usefull. Thank you bro!
man is it weird that i went from 276watts on the 6800xt all the way to 170watts while gaining more performance?
Thanks so much! Got a little over 12k on memory and 2900mhz on core without higher temps ure the goat!
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!
Dude this is awesome! mines performing better while using way less power and not running hot. Thank you good sir.
Thanks !!!! Clear, simple, and very helpfull
This is the best undervolt video i have ever seen.
Ahahahah I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials
does increasing the memory clock by 1000mhz increase the memory temps? awesome vid, the basic undervolt works like a charm
Why is my temperature going up?
lets go !!
best content as always ma man !
My zotac twin edge oc 12gb very stable 975mv at 2805Mhz with +1600 memory clock.
3dmark port royal stress test 50 loop smooth like butter,CP 2077 max setting with path tracing no crash .
-20w than stock ,+ 10% fps performance ,and 71-76c temp.
Thanks mate !!
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :)
@@ImWateringPSUs of course ill always support you ma man,keep up the good work !! DONT FORGET TO SENT ME SOME 4090 LOL
My game always crashes even on the efficiency preset 😢
dOES IT INCREASE THE MEMORY TEMPERATURE, SINCE YOU INCREASE THE FREQUENCY
My Problem, as soon i hit apply after changing the curve the memory hu goes down to 5000 in msi afterburner
i got the same problem
Cheers, many thanks!
Good shit man thanks
Asus dual evo oc:max i got is 2750hz at 975mv with +1400 mem clock
Bruh, I VERY rarely leave a comment on youtube but this was so simple to follow & worked perfectly for my ASUS 4070 Super Dual OC GPU. I'm using your preset 2 and it's only about 50hz lower than my GPU was boosting to on stock settings while running 8-15c cooler & my power usage under load went from like 212w to roughly 160w... almost a 25% decrease in power usage!! Even my Hotspot temp dropped a decent amount :) Thanks a bunch for this, dunno if you'll see this since 4 month old video but wanted to let you know its still helping peeps! Cheers, liked n sub'd
Edit - Forgot to mention it brought my 3DMARK TimeSpy score up 19803 from 19339 & my Steel Nomad score up to 4969 from 4608
Hey, I just got this GPU and I’m about to undervolt it. How has the undervolt held up and what’s your boost score? I have an Asus 4070 super dual OC Evo. I’m not sure what the differences between the evo and non-evo.
@@kkmcgamercheck if you have 110% fan power limit option in MSI Afterburn - I have nonEvo and have it
@@kkmcgamerI also have Asus 4070 Super Dual Evo and it's the worst card I ever had. Hot, loud, only 2670mhz boosting... The case is Lian li lancool 216 with bottom and external fans mounted. The airflow is no problem at all.
@@Prorayque it’s such a garbage cooler, i thought it was the same like the regular dual but it’s so much worse. Without my undervolt it will probably be at like 70-75c with the fans screaming at 2000-2300 rpm. I honestly might try and complain to Asus and try and fight for a replacement regular duo version because there is no mention anywhere that the coolers are this different. I’m also using a msi mpg gungnir 300r airflow and airflow is definitely not a problem, I even added 2 intake fans below the gpu and they barely made a difference. Did you end up returning the card?
@@kkmcgamerI also noticed that the bottom fans (140mm Arctic Cooling P14 Pwm PST) as intake didn't make a difference, maybe 1-2c and I find that quite disappointing. Not sure what I'm going to do, probably gonna sell it and than buy a triple fan card. Gaming X, Asus Prime, Tuf gaming, etc. Dual fan never again.
Hey, I noticed that the undervolting method that you use for 4000 Series cards is different than the undervolting method you used for 3000 Series card (such as the 3070 undervolt video). What are the differences between the two methods? Is It safe to use this method even for other cards?
Because rtx 40 series is stubborn sometimes, i tried undervolt my 4070s with old method it doesn't work, after i hit apply it only work for few seconds but after that my gpu frequency and voltage increase above the undervolt preset
Very good point! RTX 4000 behaves differently when it comes to effective clock. The method used on RTX 3000 I deem a bit superior actually, because you have absolute stability on the lower end of the curve. But it would lose you clock on RTX 4000, so we can’t do it. But in the end, they’re basically the same really :)
@@ImWateringPSUsJust curious. Did you learn this from trial-and-error experiments? Or, is there a way to estimate the result depending on the architecture?
2955 MHz core clock, and 1500 MHz memory clock. Stable as could be.
Friend, an important question that I remembered at this moment, you talk about efficient undervolt, and in performance, the graphics card doesn't heat up? What temperature does your GPU reach in performance? TKSSSS
thank you vm!
Which differences in performance and other aspects are between the 900 mV and the 975 mV methods?
Its the gpu clocks that matter not the voltage. Having a lower voltage only potentially saves power consumption (watts)
should i wait for 50 series or nah?
To be honest, nah. The Super series is veeery good, check out my build with the 4080 Super if you wanna take a look at some numbers!
@@ImWateringPSUs nah the 4080 series screams belt in my book, i have the money but my parents wouldn't approve it, therefore im picking either the 7800XT or the 4070S, for the long run sure the 7800XT wins but i do intent on hopping on the 3d game dev stuffs. unless amd decided to shit on cuda i think the 4070s is the way to go no?
Only one question.. why setting mem clock to +1000? reasoning?
More fps
Thanks! On my Asus Dual 4070 Super EVO OC, 2750Mhz gpu @975mv and 12000Mhz (or +1500) memory seems stable.
What are your temperatures and are you still stable at these settings? Thanks in advance 👍
@@ronwladyka8127 I settled on 2730Mhz on the gpu and +1900Mhz on the vram and that has been 100% stable for a couple months now. I've seen as high as 75C when playing Star Wars Outlaws but it's usually right around 70C. I'm playing Indiana Jones today on ultra settings with full RT and it's at 68C while using 100% of the gpu.
@@SnubBarracuda I have that same card, but 2700MHz and +500MHz on mem with 975mV was not fully stable when playing Indiana Jones and The Great Circle. Had few game freezes. Still trying to find a combo that works 100% of the time
Following these instructions with my Palit 4070 Super 2x I have crash problems in gaming with any undervolting preset, even the lightest.
I crashed Cyberpunk, A Plague Tale, and The Last of Us. Sometimes it runs fine for hours, other times it crashes after 10 minutes, so I went back to the factory voltage and turned on a custom cooling curve.
Wtf you life saver i have a new build, my RTX 4070 super was getting upto 84c with a bit of coil whine was loud as hell now it wont go above 70c THANKS!
4070S doesn't go below 925mv though?
And in the MSI curve, the lowest you can go to is 920mv because if you try 925mv, it will run at 935mv.
The same on FE model, when I set 900 it just runs at 925
Same here. The lower I could go on the voltage was 925-930mV no matter what :c
The 2750 975 setting doesn't work for all apparently, my inno3d twin x2 4070 super crashes from time to time with it.
Same issue on my 4070S Inno3D Twin X2. Crashes in Manors Lords and EFT.
Have you found sweet spot for UV this GPU?
Thank you 🙏
Thank you from America!
really good video, really easy to follow thank you
Finalmente qualcuno che ha fatto un tutorial semplice senza troppe informazioni inutili! Ti consiglio solo, dato che fai un video in inglese, di usare la lingua inglese anche nei menù di Afterburner.
Grazie mille! Hai ragione sulla lingua :) Iscriviti se ti è stato utile e vuoi supportarmi!
Fabrizio Romano is that you?
I had artifacts in msi kombustor with the second preset :/
I had recently purchased a 4070ti S dual OC and was tired of the temps pushing higher and higher, I went with 2625mhz for the clock, and the temps are so much better, paired a 5900x It's great
Привет бро, какая темпиратура была хотспота бо андервольта и после? Скажи пожалуйста то так и не понял
поверь, упадёт значительно)
whenever i do both of your presets, it just starts artifacting. How should i proceed?
from 90c to 70c. THANKS MAN
THANKS 🎉🎉🎉
thanks this made the coil whine way quieter and it is very annoying so again thank you
Thank You my friend ! The best tutorial! All works perfect!
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!
thanks so much. I achieved 2760MHz 975mV on the core and +1500MHz on the memory (pny dual verto)
I hate that everytime I search for undervolt GPU i fond you because you never show power usage GPU (watt) in your video then how tf we know that Undervolt actually work?
With the first setting from the video my 2F Asus dropped from 220 to about 120-150 watts
@@kamilb.3525 Thank you, I need that info for sffpc
How come the guide differs from older 3000-series to 4000-series? Like you actually lower the core clock for the voltage before the 900mV on older cars, then spike it up to the overclock at 900mV, while you increase the entire curve up to the OC on newer? Just better new technique?
Thank YOU
Im trying to use the curve, but my gpu mhz is stuck at 2505?
Windoze Only 😞
Thank you
best video thanks
I can up my memory clock with +1000 or +1200 (saved and working) but when doing the voltage stuff (from 900 to 2550 or 950 to 2550 or 900 to 2450) my memory clock drops to 810 MHz? I am not sure what is going wrong….itbis a shame because the power dropped about 60w. Can someone please help me? I have a Asus RTX 4070S Dual and AMD Ryzen 9 7900 setup….
Do you have maximum power output in Nvidia 3D settings? If you have it on "Normal", those clocks under Windows can drop to lower values.
@@ZinhoLabs thanks for your reaction! Checked today and indeed it was on Normal! I have done it again and now it seems to be working. With undervolt (900 - 2550) and overclocked the mem (with 1200MHz) I’ve managed to reduce power with about 60W. But, in addition to this I’ve also set the max. fps in nVidia app on 120 (my screen is also on 120MHz in stead of 165MHz) what resulted in another 60W! So, my 4070S uses now about 120W less than before!
Hello friend, I would like to thank you directly from Brazil. This is a hot country and I was getting 75 degrees 100% on a 4070 super galaxy, It's still cold by his standards. but I chose to have a more comfortable temperature. with its profile it is a maximum of 68 degrees and 80 hotspot. thanks!
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials
Mano aonde que ver o Hotspot dessa placa?
Many thanks to you. I was able to get a stable 2820mhz at 1,000mv and +2000 on memory clock. I have the exact same card as you show in the video. I think I actually set it in the curve to 2822mhz, but in Cyberpunk it'll start at 2835mhz and after a few seconds drop to 2820mhz and stay there.
that is because the Nvidia card changes the frequency in 15MHz steps
I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!
I get only half MEM: 5001 Mhz with the undervolt? With a ASUS 4070 S OC DUAL
La mia scheda rimane fissa a 2475 originali sempre anche se cambio la curva nel grafico
is the memory overclock necessary? If you didn't do that, wouldn't that leave some headroom to push the undervolt even further?