Thanks for the video. I have an x grip clamp for my cruiser but want to get one like this for my cbr. I had that problem with the rubber arm pressing my phone buttons also. What I did was just remove the two top rubber grips. Once the flappy back thing is secured on my phone, it wouldn’t move. Works fine.
Man i love you for making this video, i saw a couple of videos on how to install this and i got confused because the rubber part went all the way inside the stem and i wasnt sure where to cut. then i see this video of you installing the mount on the EXACT bike that i have :D thank you
It helps a lot when using the X-grip mount with the phone to hook the tether around the bottom edges of the phone first so that the grips aren't being pushed up towards the power and volume buttons.
So that cap you remove on my zx 6r it fell off and it rained so now there is water stuck inside.. how do I get rid of that water or will it rust anything up 😞 my zx6r only had a plastic cap not nut
chasiu75 hey thank you also you know the bit at the bottom you put in before the nut, I think it’s to big! You know how there’s 5 sizes, it’s the middle one ☝️ you might be able to get it tighter 👍😊✅🇦🇺
What ever happened with your Saylor- Beall 707 rebuild? Everyone subscribed to the thread on the GJ, has been wondering what became of it...we need an update!
I had/have the same issue, I tightened it off the bike some more but I can’t seem to get the plastic washer to bite down on the rubber, every time I tighten it, it just expands the rubber, so I stick it back in and try to tighten the bolt to secure it to the bike and it just spins again. I took some of the glue that was in the box and put it where the ball and washer meet and where the bolt goes through the ball mount so maybe it’ll help hold it from just spinning around. Only thing I know to do is to take the stupid plastic washer off and replace it with a metal one and tighten the nut from the bottom
So hard finding someone who knows how to take care of the 2016 CBR500R. Thanks man.
fellow 2016 CBR500R owner here... your videos on the CBR are awesome! thank you for sharing the knowledge!
motoHK Are you in Hong Kong?
chasiu75 im in the Philippines
You saved me!!!😂 single mom who really needed to learn how to do for myself.😊 thank you
Thanks for the video. I have an x grip clamp for my cruiser but want to get one like this for my cbr. I had that problem with the rubber arm pressing my phone buttons also. What I did was just remove the two top rubber grips. Once the flappy back thing is secured on my phone, it wouldn’t move. Works fine.
Man i love you for making this video, i saw a couple of videos on how to install this and i got confused because the rubber part went all the way inside the stem and i wasnt sure where to cut. then i see this video of you installing the mount on the EXACT bike that i have :D thank you
It helps a lot when using the X-grip mount with the phone to hook the tether around the bottom edges of the phone first so that the grips aren't being pushed up towards the power and volume buttons.
Use rubber for the washer not the metal one that comes with it. Won't move around
Wait, did you cover the front wheel with a paper bag before investing in the stocks?
So that cap you remove on my zx 6r it fell off and it rained so now there is water stuck inside.. how do I get rid of that water or will it rust anything up 😞 my zx6r only had a plastic cap not nut
Great video was wondering how to mount a GPS on my sportbike
Hello my friend,can you still see the speedo when the iPhone 📲 is vertical ?
Thank you heaps 👍🏻😊
DR Demon Yes, no problem if the stem base is pointed down. It can be positioned higher or lower by rotating the base.
chasiu75 hey thank you also you know the bit at the bottom you put in before the nut, I think it’s to big! You know how there’s 5 sizes, it’s the middle one ☝️ you might be able to get it tighter 👍😊✅🇦🇺
Great video !!!!!!!!!! just what i was looking for.
What ever happened with your Saylor- Beall 707 rebuild? Everyone subscribed to the thread on the GJ, has been wondering what became of it...we need an update!
Thank you!!
Mine didn't not go in anywhere near that easy
I don’t get it tight: it keeps spinning around. And the bold won’t go up the threat. Agh!
It should grip the bottom of the rubber with the ridges in the plastic. Try to test it outside the motorcycle first.
I had/have the same issue, I tightened it off the bike some more but I can’t seem to get the plastic washer to bite down on the rubber, every time I tighten it, it just expands the rubber, so I stick it back in and try to tighten the bolt to secure it to the bike and it just spins again. I took some of the glue that was in the box and put it where the ball and washer meet and where the bolt goes through the ball mount so maybe it’ll help hold it from just spinning around. Only thing I know to do is to take the stupid plastic washer off and replace it with a metal one and tighten the nut from the bottom
Did the ram mount destroy your phones camera?
2 years later but yeah, the vibration messed up the camera on two of my phones so far
I ended up putting this in the trash. Still wobbled around too much for my liking.
Bruh.... What's up with the pronunciation of your "T's" ??? It almost hurts to listen to your instructions! Other than that, good vid.
😂
“Titan” it not tighten “titan” 🤣🤣🤣 & titaning
First comment!!!!
You are fast!