Olá 👋... Muito bom seu vídeo! Sou do Brasil tenho um equipamento chauvet então estou conseguindo usar a mesa DMX 512 ( muito usada e conhecida aqui no Brasil 😃 ) O meu equipamento chauvet tem no display apenas três botões.. ( enter, UP e daw ) Pode me ajudar nisto? 😃
Make sure it's in 4 channel mode and set the start address to 037. Verify that the PFX is in Sound Reactive function and the mode switch is set to Live or Beat. For in depth help, contact our tech support at sales@aeonraven.com
So if I were connecting this to a Vista Jands Console, MA, or HOG for example, How would I address it? Every time I patch it in. It dosent work at all.
Are you patching in the COLORstrip or the PFX? Please contact us for tech support with as much detail about what you're doing and the equipment you're using: aeonraven@ymail.com
We don't recommend using the on-board microphone but if you have to, set the light near a speaker and turn the sensitivity down until you see it work cleanly on the beats at the level you will be playing at.
The start address for a 7+ channel hex light with a master dimmer on channel 1 is start address 001 for an All-In-One performance style. The PFX sends commands to a lot of different types of lights with 4 different performance styles and they're all sent on different start addresses to accommodate the different DMX implementations.
Olá 👋...
Muito bom seu vídeo! Sou do Brasil tenho um equipamento chauvet então estou conseguindo usar a mesa
DMX 512 ( muito usada e conhecida aqui no Brasil 😃 )
O meu equipamento chauvet tem no display apenas três botões.. ( enter, UP e daw )
Pode me ajudar nisto? 😃
I have the color strip mini and am having a hard time programming it to flash along with the music/beat. Any help is appreciated.
Make sure it's in 4 channel mode and set the start address to 037. Verify that the PFX is in Sound Reactive function and the mode switch is set to Live or Beat. For in depth help, contact our tech support at sales@aeonraven.com
So like yours...there is one "LED" that looks dead when lit... Do you know what this is? Thanks!!!
We think it's an IR led used for receiving signals from the IR Remote control.
So if I were connecting this to a Vista Jands Console, MA, or HOG for example, How would I address it? Every time I patch it in. It dosent work at all.
Are you patching in the COLORstrip or the PFX? Please contact us for tech support with as much detail about what you're doing and the equipment you're using: aeonraven@ymail.com
Just sent an email.
Hi, any tutorial fornusing only thru "mic" activation?
We don't recommend using the on-board microphone but if you have to, set the light near a speaker and turn the sensitivity down until you see it work cleanly on the beats at the level you will be playing at.
@@AeonRavenLights thanks a lot for the feedback, sorry for annoying but... do you know what presets to use? I am lost on this :(
@@michelbrito5023 Set ACt to A23 and P000. That should put you in Sound mode with auto programs. (looking on page 11 of the Colorstrip manual)
So can I use these like a led light strip for like a 4x4. Like is there an easy way to wire up so is brite white
why not start these lights at 0 or 1 DMX address?
The start address for a 7+ channel hex light with a master dimmer on channel 1 is start address 001 for an All-In-One performance style. The PFX sends commands to a lot of different types of lights with 4 different performance styles and they're all sent on different start addresses to accommodate the different DMX implementations.
Such garbage that these dont play nice with a standard DMX controller. What a scam...
So I really dont know anything bout these light strips. An yall will probably think this is a east