Axial Thrust management: Balancing disk and Drum in multistage centrifugal pumps (with english subs)
HTML-код
- Опубликовано: 28 авг 2024
- This is second video in series of Axial Thrust Management in centrifugal pumps and compressors. In this video, you will learn about
1. Axial thrust in multistage centrifugal pumps
2. What is Balance Disc and how it works
3. Balance drum arrangement
4. How to do thrust calculations
5. Balance disk and drum arrangement
6. General maintenance in Balancing Disk
Kindly leave your comments, feedback and queries in section below.
Thank Very Much, I am working in the Pump Industry, This really helped me understand Axial Thrust management
Great
Nice. Information with simple language. Its really help me to understand quickly.
Glad it was useful!
Vow, very beautifully and simple way explained the balancing disc arrangement in pumps. Thanks
Thank you Sir for so much of deep explanation.
Glad you liked it!
Thanks for such informative video.👍👌👌
Glad you liked it!
❤ great useful class
Glad you liked it!
Fantastic information. Thanks
Glad it was helpful!
THANK YOU!!
Very informative
Glad you think so!
Thank you
You're welcome
Good video but in the end of the video, what do you mean by the "clearance between disc and the valve". So what is this "valve"?
Thanks.
Moving balancing disc and stationary balance valve ( counter balance head which is fixed on casing)
👍👍
Glad you liked it.
Hi sir .
Please explain how the number of vanes are decided in an impeller ?
Which side provides this balancing drum...NDE or DE....??
NDE
sir single stage centrifugal pump me axial thrust lag skta hai?
if yes then how?
Please view the same in our video ruclips.net/video/OaOKBuL7-Fg/видео.html
Discharge pressure jo impeller ke back pe hai woh uske suction ki taraf push karega again so to avoid agar hum balancing disc use kar rahe hai toh clearance badne ke baad balancing disc ke backside me jo pressure hai woh bhi suction ke taraf hi push karraha hai toh balance kaise horaha hai
Discharge pressure act between balancing disc and balance head ( stationary) and move balancing disc opposite to axial movement of impeller due to discharge pressure. When water flows back to balancing disc pressure drops and equal to suction pressure or balance pressure and maintain balance and keep shaft in center. If any doubt ask again. Pls watch video slowly with explanation.
Sir could you please make a video about how to set axial and radial of centrifugal boiler feed pump.
Thankyou
Please see video on axial thrust management in boiler feed water pump
may i question mister, a problem in pump, pressure in line balancing high, normaly 7 - 10 Bar, but when operation 20 bar, press in and out normal, in = 7- 8 bar, out 125, bar what the problem, may you help what the problem
Clearances increased.
Sir what gap to be maintain between shaft and stage casing also gap between balancing seat and balancing seat
Each pump manufacturer recommend the size of gasket between stage casing and gap between balancing disc and seat. You have to follow the same. However stage casing gap is decided by gasket and impeller shall not touch the casing. The gap between balancing disc and seat is decided by measuring total axial float and shall be kept 2/3 and 1/3 of total float.
Sir, can you share the PPT?
Bhai plz mack a video in Hindi language,
Thanks for suggestion Dear hindi video viewers are less and also difficult to translate technical words in hindi. Anyway will try.
Not clear to explain procedure.
Which video is not clear in explanation. If any doubt, please ask the question.