Walther Lever Action (Umarex) (4.5 mm/ .177 cal Airgun) [QUICK PRESENTATION]

Поделиться
HTML-код
  • Опубликовано: 1 окт 2024
  • Hello !
    Here is a short review of the Walther's Lever action rifle.
    It shoots thanks to an 88g Co2 Cartridge.
    This replica is single action only, meaning that you have to move the lever every time you shoot.
    Music : TF2 OST "Playing With Danger" ( • Team Fortress 2 Soundt... )
    Thanks for watching !

Комментарии • 20

  • @youtubed20
    @youtubed20 3 месяца назад

    Hi, I've just got a used one, but the charging handle seems to have some wobble to it, is this normal?

  • @csaba8774
    @csaba8774 3 года назад +4

    Hi, thank you for nice video. I really like this gun, but what I found it has half the power (~7 joules?) than other standard airguns. Do you think it has enough power to kill a rat at close range, let's say under 10 meters? I live in a village and I'm searching for airgun that is fun to shoot at targets (this one seems great for that), but that is also able to occasionally to take down a rat. Also, can the CO2 cartridge be in the gun for like a month or do you need to empty it as soon as possible otherwise gun seals get broken? Because, when I see a rat on my garden, it won't wait 5 minutes for me to search and insert new CO2 cartridge :).

    • @TheOnythan
      @TheOnythan  3 года назад +3

      Hello and thank you for your comment ! :D
      Indeed it has an Energy of 7 - 7.5 J, which is lower than most air rifle (~ ususally around 10 J). But you have multiples shots with this model (8). Concerning your question about the lethal potential, I can't say for sure since I don't use my airguns to eliminate anything, but when you see that even the bottom of cans (which is the strongest part of a can) get easily pierced, I think it's safe to assume that if you don't kill the rat, you will at the very least seriously injurred it.
      About the cartridge, I prefer to empty them whenever i can, but in your case I understand that you don't wnt to refill a new one especially if you see a rat haha. I'd say it won't be a problem if your carefull put a bit of oil on the top of the catridge, and you take care of your airgun :).
      I hope I answered your question, feel free to ask anything if you have other questions, I'll try to answer them ^^
      Have a good day !

    • @jaysoncruz1564
      @jaysoncruz1564 Месяц назад

      I

    • @jaysoncruz1564
      @jaysoncruz1564 Месяц назад

      Convert it to a refillable co2 or pcp tank and It's good

  • @Shadow_pro942
    @Shadow_pro942 3 года назад +2

    Hello thank you for you video .what about CO2 ,can you remove CO2 without finish.mean in half bottle for storrage ör need to finish all bottle tüm to replace.

    • @TheOnythan
      @TheOnythan  3 года назад

      Hello and thank you for your comment !
      Sadly it is not possible to keep the CO2 tank once it has been "open", which means that you need to finsih the entire CO2 tank.
      I wouldn't try to remove it if you have alot of CO2 left, gas decompression might damage your replica, it's better to finish it the next day if you can.
      Last information, I know that there are adapter which allow you to use smaller CO2 cartridge (from 88g to 12g), if you can find one (I never got it haha...) you will be able to use smaller CO2 tank, and therefore you won't have to shoot 300 pellets ^^.
      i hope it helped you, and I wish you a great day ! :)

    • @Shadow_pro942
      @Shadow_pro942 3 года назад

      Thank you for explanation.i just bought this rifle same model Like you.very nice rifle and in winter i think not so effective i test it.for this i keep inside at home to heat up little bit then go out to shut.try to finish CO2 .thank you and best regards

    • @TheOnythan
      @TheOnythan  3 года назад +1

      @@Shadow_pro942 Yes exactly ! With cold temperature Co2 airguns don t work at their best.
      I m glad I could help you a little ! 😄

  • @ClarkesonTheMarksman
    @ClarkesonTheMarksman Год назад

    Co2 is under powered, the tanks leak or you have to use all the gas in one session. But it is a beautiful airgun if only it was a mag feed spring

  • @exploremarcus
    @exploremarcus 3 года назад +1

    I am guessing the pad you unscrewed for the co2 is plastic and not rubber? 😔

    • @TheOnythan
      @TheOnythan  3 года назад

      Sadly you are right. It s really a Nice model with wood stock but unfortinately some parts (sights too) are just in polymer.

  • @KonaFocus
    @KonaFocus Год назад +1

    👍

  • @MyMarlinman
    @MyMarlinman 3 года назад

    Hi, I have 2 of these rifles. The black frame and the Wells Fargo, gold frame. My only criticism is the incorrect hand guard , as it should protrude about 50 mm. beyond the barrel band.I purchased some beech wood to make 2 extension pieces. Big improvement to look of Rifles.Looks more realistic now.

  • @santiagosal
    @santiagosal Год назад

    Le puse la garrafa a mi rifle y se salio todo el gas

  • @maxtisme
    @maxtisme Год назад

    tea for 2 music slaps

  • @bulentozgur8143
    @bulentozgur8143 3 года назад

    Thank you for your video which is very nice Quick review.What about temperature of co2 usr did you have any problem i mean in use winter time

    • @TheOnythan
      @TheOnythan  3 года назад +1

      Hello, thank you very much for your comment :)
      Where I live I can use my airgun in winter because it's not very cold (we rarely have temperature below 0°C)
      However if you live somewhere where it's really cold, you might not want to use your airgun since with cold temperature, CO2 airguns don't work properly

    • @bulentozgur8143
      @bulentozgur8143 3 года назад +1

      @@TheOnythan thank you very much

    • @TheOnythan
      @TheOnythan  3 года назад

      @@bulentozgur8143 My pleasure, you are welcome !