It’s called a Magazine Tube by the way! lol I knew you were looking for the right word for it. Also, the reason I love this so much, is because not only does it load and work like the real thing, it feels like the real thing, super quality heavy metal construction with a nice balance weighty feel, definitely doesn’t feel cheap by any means. I keep all my airguns in a closed case, but I keep this one on my shelf because it’s so pleasant to look at. The action feels great after greasing up all the tracks, super smooth now.
Great fun. It will fire pellets if you use the cartridges from the pistols. You get the odd pellet that doesn't fire if you use pellets in the BB cartridges. You can also use one full and one empty co2 if you not going to do loads of shooting with it. Surprisingly accurate out to 15/20 yards..
I'm honestly not happy with mine at all due to major jamming issues. The shells aren't ejecting right and some of them won't come out at all. Keep getting stuck . Had to unscrew piece of lower barrel to get spring out to get most of them out. Unfortunately 1 still wouldn't come out . I had to constantly cycle them for over a half hour to finally get all out. Feels like internal mechanism is broken. I feel something drop every time I put lever back in place. Some type of rattling drop kinda feel. So I'm throwing it out and saving up for the M1 carbine that I've been really wanting instead.
If they had a spring model where the lever action would engage both the spring and load a pellet it would be great. I can see the appeal of a real steel like action with the casings but that is an extra cost a lot of people think about.
Funnily enough, I wrote to Umarex a few days ago suggesting a model exactly like this one but a springer rather than C02 powered. I wouldn't have thought it was too hard to do. Either make a fake magazine tube the cocking lever or use the underlever loop as a means of cocking it. But, just seen Sam Fletchers post so....I'll keep a lookout. ;-)
I bet you left the co2 bulbs in permanently, that firks up the seals, you put them in just before your shooting session with pelgun oil dab on the necks then soon as you've finished your shooting remove them as the seals form around them and harden and crack then leak.
nice but for the double of the price i could get a real one so....its not even airsoft...the 4.5 its a platform that i is only useful against geant radrouches XD
Twice the price? I paid nearly 4 times as much for my Miroku Winchester 1892 in .357 as for this delightful BB and the Miroku only has a firing pin. This has a complicated CO2 mechanism. Admittedly I could have got a Rossi for a lot less but I prefer to keep the skin on my fingers.
I got to tell you, we never grow up! What we like as kids, we love as adults! I'm 69 years young and this makes me feel like I'm 12 again!! Love it!!
That's the spirit sir!
@@racknload It's actually better, we didn't have stuff like this when I was 12. Just red riders and a couple others.
@@HD-ph1dc Totally agree!!! I'll be 69 soon as well. You know the saying; ''You have to grow old but you don't have to grow up' ;-)
I love mine. I wasn't too enthused with the plastic stock so I ordered a real wood replacement kit from Airsoft Taiwan. Much better now.
It’s called a Magazine Tube by the way! lol I knew you were looking for the right word for it.
Also, the reason I love this so much, is because not only does it load and work like the real thing, it feels like the real thing, super quality heavy metal construction with a nice balance weighty feel, definitely doesn’t feel cheap by any means.
I keep all my airguns in a closed case, but I keep this one on my shelf because it’s so pleasant to look at.
The action feels great after greasing up all the tracks, super smooth now.
Great fun. It will fire pellets if you use the cartridges from the pistols. You get the odd pellet that doesn't fire if you use pellets in the BB cartridges.
You can also use one full and one empty co2 if you not going to do loads of shooting with it. Surprisingly accurate out to 15/20 yards..
I’m going to get this and a revolver and just go be a cowboy😂
It also shoots 1.77 pellets in the those cartridges
I've got one Neil, yes They are fantastic! . Ftps is good 2 . Great review 👏
Really love the enthusiasm and great gun review!
They shoot perfectly with 177 pellets as well but they never advertise it for the reasons of upsetting Walther 😜
they are doing some great stuff!
I'm honestly not happy with mine at all due to major jamming issues. The shells aren't ejecting right and some of them won't come out at all. Keep getting stuck . Had to unscrew piece of lower barrel to get spring out to get most of them out. Unfortunately 1 still wouldn't come out . I had to constantly cycle them for over a half hour to finally get all out. Feels like internal mechanism is broken. I feel something drop every time I put lever back in place. Some type of rattling drop kinda feel. So I'm throwing it out and saving up for the M1 carbine that I've been really wanting instead.
Cheers Neil Another Fun Gun !!
If they had a spring model where the lever action would engage both the spring and load a pellet it would be great.
I can see the appeal of a real steel like action with the casings but that is an extra cost a lot of people think about.
They do have them with just an 8 round pellet cylinder but it’s C02, so you don’t need the bullet casings. Umarex makes them too.
There's one coming. Umarex Marlin. Check it out.
Funnily enough, I wrote to Umarex a few days ago suggesting a model exactly like this one but a springer rather than C02 powered. I wouldn't have thought it was too hard to do. Either make a fake magazine tube the cocking lever or use the underlever loop as a means of cocking it. But, just seen Sam Fletchers post so....I'll keep a lookout. ;-)
3rd quarter of this year apparently. Its only going to be a low powered thing similar to the Daisy Red Ryder but it still looks fun.
Why don’t Umerex make the bullets magnetic for ease of collection?
The real wild west,nice looking gun, thanks for the review
excellent video thanks for sharing rack
Nice one Rack 👌🏻
Any problems with getting the CO2 cartridges out, I have the first one stuck
how many shots can you make on two co2 tubes?
I have the Amarex MP40 full auto and a Ares KAR98 two different systems .
I’ve had one for a while now it’s brilliant and shoots pellets.
Does it have the shells
I don’t need it… I don’t need it… I neeeeeeed itttttt! Haha
can it shoot .177 pellets to?
No just BB's...
I will pile on with the pellet user comments. Mine likes RWS 8.5 gr. Superdomes. Have only tried BBs just to affirm function.
It's all fun and games until you have to search the grass for your ejected cases.
Can this gun work with pellet shells?
yep
You can use pellets too or bb only?
BB only...
@@racknload and If you charge a Shell with a pellet Cal 4,5 mm???
Cuanto cuesta el winchester y donde se puede comprar
I had one, good fun, but sold it recently, got fed up picking up cartridges ha ! very underpowered but it is a replica fun gun.
Can you kill small game with it?
Anyone thought about putting 1.77 darts in the cartridges
Read the comments divvy
deux cartouche dos a dos les deux pleines ou une pleine et derierre vide merci de me repondre
Si on line
And I bet it no longer works I have two and they both worked for maybe 3 outings and now they leak. Really a bad build totally cheap crap!
I bet you left the co2 bulbs in permanently, that firks up the seals, you put them in just before your shooting session with pelgun oil dab on the necks then soon as you've finished your shooting remove them as the seals form around them and harden and crack then leak.
Prezzo
Toy guns why
It's an airgun buddy...
Airguns are not toys.
Fred Cherry you wouldn't like a pellet from it up your nose lol.
nice but for the double of the price i could get a real one so....its not even airsoft...the 4.5 its a platform that i is only useful against geant radrouches XD
Twice the price? I paid nearly 4 times as much for my Miroku Winchester 1892 in .357 as for this delightful BB and the Miroku only has a firing pin. This has a complicated CO2 mechanism. Admittedly I could have got a Rossi for a lot less but I prefer to keep the skin on my fingers.