👇 If you found this video helpful, you can support us by buying products on a platform of your choice via our links below (we get commission): 👕 Make your clothes unique: rctoys-aventura-smart-solutions.myspreadshop.com/ ▶ Amazon: 1. Eachine E58 Drone: amzn.to/3Rexryy 2. Spare parts: amzn.to/3FBthwB 3. Regular and high-capacity batteries (500mAh, 850mAh and 1200mAh): amzn.to/3DNh4DG ▶ AliExpress: 1. Eachine E58 Drone and spare parts: s.click.aliexpress.com/e/_DmQPLQX 2. Regular and high-capacity batteries (500mAh, 850mAh and 1200mAh): s.click.aliexpress.com/e/_DCotVQn 📺 Related videos: All Eachine E58 Drone videos here: ruclips.net/p/PLA0BUXPCZx4PechpTGIhyCMbf1j6yIOvV
I have adrone e58,,, but all time i started to fly the drone was swerving and i dont know how to fix it,, even i push left and right botton swerving all the time,,,,, but i wondering there is a calibration on that drone that never write on the manual,,,,and now i watch your video that is true my drone is now calibrated and they steady never swerving again,,,, a was happy thank for your tutorial sir,,,, oh before i forgot the calibration on my remote was side to the left and side to the right,,, but anyway it is usefull thank you very much for video tutorial
I bought 2 of them tried your ways. Did not stablize . We just bought cheap toys so just live with it. I had the mini SE drone before. I gave to a friend of mine. It was very steady after calibration. Thanks for your effort. Good luck everyone. Have fun. Next time buy a better toy...
I think that if you would calibrate at a slower speed setting it would work correctly and move the joy sticks slower as well it will stabilize easier, IMO.
Yes, the drone should be calibrated at the slowest speed, otherwise it would be difficult to control the drone while calibrating. Stabilization is not done by sticks, it is done using buttons, the sticks here are manipulated to avoid the drone crashing into walls while pressing the calibration buttons at the same time. It may drift aside too fast so indoors you may need to do so, outdoors - no need to touch the sticks if there is no wind and just calibrate pushing the buttons.
I have some problems charging I don't know when it's full charge o charged it but after an hour I unplug it and plug it again and the red light turns off quickly does that mean it's fully charged? My drone is e88
normally, if the indicator on the battery turns red without blinking, then it should turn off when fully charged. If the indicators are blinking when charging, then normally they should stop blinking when charged.
Great job, buddy! Do you have a text version, and I actually got a different remote control, 6 buttons on top, instead, as you have 4 buttons on top. Can you help? All text on my RC is in Chinese! Even manual. Maybe you can help with your expertise?
I want to do factory reset but not working. I pressed the throttle lever and the directional lever at the same time which I angled to the button right corner but the drone is not factory resting. Pls any help!!! My drone is S89
Hi, Do you know how to skip the gyro check after power on? To calibrate the drone must be placed very stable. I use mine on a boot, and it keeps checking the gyro to become stable. This does not succeed on a moving boat.. any hint is welcome
I have the same drone, but sometimes I can't control it when I turn it on and I want to lift it into the sky. She doesn't just want to turn in one direction while she's still on the ground
have you applied factory calibration? have you done it on a plain surface? are your propellers in good condition? Is there any dirt in gears or rust in motors? These are the factors to look at.
also, if you know that it will go to the right, before taking off use the control stick moving it to the left to balance the drone and then try to calibrate during the flight, manipulating the control stick with the calibration buttons at the same time. But if you have a lot of space around just start calibrating as soon as you take off quickly pressing the calibration buttons in the corresponding direction before it flies too far from you, as you may loose the sense of direction too.
This drone is soo aggregating to use! First time I started it, it flew super fast towards my TV !!! Good thing it did not break it!! Now when I try to turn it on, it immediately flights to the left! I tried your factory setting and one of the propellers won't even turn on anymore so what turned off everything and not it won't connect... I just see the drone with blinking lights. =(
help my xh4k doesn't callibrate anymore when i rotate the right controller up the drone light flicker becomes slow but when i rotate it done it doesnt stop flickering like it used to be
Perform factory calibration reset on a plane surface, and then calibration in the air, if it does not help, check if there is debris in the propellers mechanism. If you replaced propellers, check if they were installed properly, the blades should be heading the right direction. Try a different well charged battery.
In my dron have a little legs in front. Maybe due this it is not calibrate. I have E88 . After it crash with wall dorne drift to left forward. Now see you are remove it legs.. I will try this also thanks
the drone s89 is not flying, so i want to do factory reset but the drone is not resetting. I pressed the throttle lever and the directional lever at the same time which I angled to the button right corner but the drone is not factory resting. Pls any help!!!
You need to practice, this is the most difficult part, when the drone rotates around its axis, due to wind for example, or you touch accidently the rotation stick, in such cases you need to see in what position the drone is and redirect it correctly.
HI, I have a question for you. the question is: Do you have to calibrate your drone every time you fly it or just the first time? I’ll appreciate your help. Thank you.
Please help. mine will not ascend in forward flight. If I let go of the right stick, then I can get it to ascend. but if I push forward on the right stick and up on the left stick at the same time it will just hold altitude or even descend sometimes. Super lame
It can happen due to wind and air flows, or when you fly forward in the highest speed mode, the air pushes the drone down. as the drone inclines forward a bit, the air pushes on its top surface and the ascend becomes difficult or too slow.
@@RCToysAventuraSmartSolutions okay yeah that makes sense. I guess it just doesn't have enough power to overcome the downforce. That's a bummer. I was thinking there's something wrong but it sounds correct what you're saying. I guess I better get a higher quality drone. I'm at the stage of flying where I'm good enough to do fast Forward flight but this thing won't cooperate
have a drone like this but for some reason it wont turn on, tried charging it and a blue light appears ont the battery. doesnt do anything when i charge it a little and put it back in
Hey man, how are you? I have been having a problem, my drone's wifi doesnt show up, i bought it 2 hand and i cant seem to find a way how to do that, can you help me?
Sometimes it takes time for wifi connection to appear in the phone. Sometimes the wifi adaptor may fail due to humidity. Also check what wifi standard your phone and the drone are using. They could be 2.4 or 5 Ghz wifi and they should match on both the drone and the phone.
They are different, E58 is smaller, faster, more difficult to control, default battery has shorter flying time, but alternative batteries are available, in my opinion was more fun to play with. E88 is larger, thus slower, not as responsive to controls on higher speeds as E58, but is easier to control, with optical flow positioning, thus with better auto calibration, the controls are better designed, more intuitive.
Hi i heve tried to calibrate my drone with joysticks but it doesn't work. I take the joysticks to the direction you said but o don't hear the sound that the calibration is done.thanks for answering.
My drone just keeps on blinking I follow all the tutorials to bind it or whatever but it won't work. I keep charging it till its full and don't know what to do. I'm so close to just leave it in my closet to collect dust
Hey I got this new issue about the same drone you got,it keeps falling off when I try to hover and stable the drone to calibrate is there a problem there or I might just misclick the 360 roll button.
roll over button after you press it does not do anything until you press left of right button. then it would roll to the left or to right. not sure if i understand your problem, but calibration buttons should not be affected by roll buttons, they just incline the drone a bit to the left right front or backwards.
@@RCToysAventuraSmartSolutions I found the problem after I inspect the inside electronics,I seems like the rear right motor wire tend to shake or when it crash ton of times the circuit where the motor is connected is not in placed anymore maybe it's not soldered well or I bought the wrong one because it doesn't support SD card insert.It doesn't even have the name called emotional drone in the front left arm so might be a scam.
this model drifts a bit after calibration, it cannot be calibrated perfectly, as this is manual calibration, and there is no GPS stabilization in this model.
if you mean the app, check out other apps, they have upgraded versions and some do not work anymore as expected. I have a video about different apps for this drone, check out the e58 playlist on my channel. Other thing to try is to turn off all connections on the phone, like mobile internet, hotspot, and leave on only the wifi connection. Also, it is important not to turn on the app before turning on the drone, it may affect the app as well. Turn on the drone first, then connect to a phone via wifi and then turn on the app. If no wifi signal is detected, check if you have 2.4GHz or 5GHz wifi on you phone, wifi mode should be the same, the E58 drone uses 2.4Ghz wifi. Sometimes wifi module goes bad, this may happen if water gets on the wifi circuit.
I need some help with mine, I was flying outside and then a gust of wind make me lost control of it then it crashed after I’ve wanted to turn it in but only the red light flashed and I can’t do nothing pleased someone
try turning on the drone first before you turn on the remote control, otherwise it wont connect. Check the batteries in the remote control as well. On the phone, you can use the same joystick combination to reset factory calibration. Slide your fingers on the screen after turning on the controls on the screen in the same direction as you would do it with sticks on the remote control.
Sometimes it takes time for wifi connection to appear in the phone. Sometimes the wifi adaptor may fail due to humidity. Also check what wifi standard your phone and the drone are using. They could be 2.4 or 5 Ghz wifi and they should match on both the drone and the phone.
if a drone does not have GPS a bit of drifting is normal, there is always airflow that will make it drift, and at different heights it may drift differently, when flying closer to objects or to the floor you get different air pressure so it may drift differently too.
your drone cannot connect to wifi, the drone has a wifi transmitter which connects to your cell phone. Your cell phone should see a name of a drone among other wifi connections, usually a name is a combination of letters and numbers that indicate the camera resolution. Once you choose the drone's wifi signal, you can then open the app and connect to the drone.
patience and practice is needed here. also it is important to choose comfortable environment to feel how it works. Better inside in a big room with a lot of space with no wind.
Sorry about that, I understand your frustration. This drone requires manual adjustment all the time and some practice. On the other hand, it is good for start, as you pay very little to get an opportunity to enter the world of drones and decide if you would enjoy it or not. My first attempts to control this drone were also frustrating but then it became a lot of fun and now I learned enough to get to another level. An expensive drone if lost could become a bitter experience as well, so it is a good drone for starters.
Mine almost did the same thing yesterday, my first day using it. The only think that stopped it from flying away, never to be seen again was a tall oak tree. What a piece of junk. I should have known better than to buy it.
Poor demo. I only say that, because whenever you operated the controls, the remote was out of the picture. It was those you were doing it intentionally.
Thank you for your comment. It is still possible to get the idea of how to calibrate the drone, I have shown the location of the buttons on the remote control, you can hear the beeping sound when I press the calibration buttons.
Thank you for your feedback. All cheap drones are for beginners, an opportunity to explore new technology, the first step to discover if this is something for you. This is a good opportunity to learn how to control a drone avoiding crashing, drowning or simply loosing an expensive drone or spending too much money on something you would keep on a shelf if it is something you would not enjoy.
👇 If you found this video helpful, you can support us by buying products on a platform of your choice via our links below (we get commission):
👕 Make your clothes unique:
rctoys-aventura-smart-solutions.myspreadshop.com/
▶ Amazon:
1. Eachine E58 Drone: amzn.to/3Rexryy
2. Spare parts: amzn.to/3FBthwB
3. Regular and high-capacity batteries (500mAh, 850mAh and 1200mAh): amzn.to/3DNh4DG
▶ AliExpress:
1. Eachine E58 Drone and spare parts: s.click.aliexpress.com/e/_DmQPLQX
2. Regular and high-capacity batteries (500mAh, 850mAh and 1200mAh): s.click.aliexpress.com/e/_DCotVQn
📺 Related videos:
All Eachine E58 Drone videos here: ruclips.net/p/PLA0BUXPCZx4PechpTGIhyCMbf1j6yIOvV
My e99 k3 drone is drifiting
Can you help me
Thanks for the directions. Never thought calibration is so complicated.
Fantastic introduction and explanation of the controls thank you.
I knew this already i just came here for fun ✅😆
Thanks for sharing idea, hope I can fly my drone properly
Sheesh. Showing us how to do it, yet alone indoors. Thats wassup thanks brotha
Buen video. Tendré que verlo muchas veces para poder aprender. Gracias makina!!!
Saludos desde Colombia!!!!
🛵🚴🏾🛴🏃🏽🫕🏋🏾♂️🎣❤️🇨🇴🙏🙏
1:16 Nice landing😳
I have adrone e58,,, but all time i started to fly the drone was swerving and i dont know how to fix it,, even i push left and right botton swerving all the time,,,,, but i wondering there is a calibration on that drone that never write on the manual,,,,and now i watch your video that is true my drone is now calibrated and they steady never swerving again,,,, a was happy thank for your tutorial sir,,,, oh before i forgot the calibration on my remote was side to the left and side to the right,,, but anyway it is usefull thank you very much for video tutorial
very nice bro! keep goin! now I have got an idea to calibrate my one🥰
I got my first drone today thank you for showing me how to start flying my drone 👍 and sub ...
I bought 2 of them tried your ways. Did not stablize . We just bought cheap toys so just live with it. I had the mini SE drone before. I gave to a friend of mine. It was very steady after calibration. Thanks for your effort. Good luck everyone. Have fun. Next time buy a better toy...
Thanks..it was helpful
Hi I got a Simrex x900 drone and what does calibrating do
I think that if you would calibrate at a slower speed setting it would work correctly and move the joy sticks slower as well it will stabilize easier, IMO.
Yes, the drone should be calibrated at the slowest speed, otherwise it would be difficult to control the drone while calibrating. Stabilization is not done by sticks, it is done using buttons, the sticks here are manipulated to avoid the drone crashing into walls while pressing the calibration buttons at the same time. It may drift aside too fast so indoors you may need to do so, outdoors - no need to touch the sticks if there is no wind and just calibrate pushing the buttons.
I almost through my drone away thank you for the help 👊🏽.
I have some problems charging I don't know when it's full charge o charged it but after an hour I unplug it and plug it again and the red light turns off quickly does that mean it's fully charged? My drone is e88
normally, if the indicator on the battery turns red without blinking, then it should turn off when fully charged. If the indicators are blinking when charging, then normally they should stop blinking when charged.
@@RCToysAventuraSmartSolutionsno I mean the red light turns off even tho it's low battery I don't know if it's fully charged
Great job, buddy! Do you have a text version, and I actually got a different remote control, 6 buttons on top, instead, as you have 4 buttons on top. Can you help? All text on my RC is in Chinese! Even manual. Maybe you can help with your expertise?
What model do you have? How is it called?
Bro how to fix after i plug the battery the 2 motors is running and im not pushing throttle
I want to do factory reset but not working. I pressed the throttle lever and the directional lever at the same time which I angled to the button right corner but the drone is not factory resting. Pls any help!!! My drone is S89
.........👆👆👆
consult this technical support for any complain, request or enquiry.
Thank you!
Hi, Do you know how to skip the gyro check after power on?
To calibrate the drone must be placed very stable. I use mine on a boot, and it keeps checking the gyro to become stable. This does not succeed on a moving boat..
any hint is welcome
There was no problem with my calibration it was the pinion gear it was loose in the motor but i fixed it
Ok
How did u fix it I have same problem
@@jordi5303 you have to diassamble it to check on the motor gear its really easy
@@halaman887 I have like a clone of the real drone from china but I cant open the rotor thing its like stuck with glue
@@jordi5303 oh well did you try to find some screws maybe there are screws that are hidden
I have the same drone, but sometimes I can't control it when I turn it on and I want to lift it into the sky. She doesn't just want to turn in one direction while she's still on the ground
You fix it?
Exelent.. thanks man.. really appreciate. Thanks
Every time i start it, it shoots off to the right fast agrivating even after calibrating
have you applied factory calibration? have you done it on a plain surface? are your propellers in good condition? Is there any dirt in gears or rust in motors? These are the factors to look at.
do manual calibration when flying, push the corresponding calibration buttons as many times as necessary
also, if you know that it will go to the right, before taking off use the control stick moving it to the left to balance the drone and then try to calibrate during the flight, manipulating the control stick with the calibration buttons at the same time. But if you have a lot of space around just start calibrating as soon as you take off quickly pressing the calibration buttons in the corresponding direction before it flies too far from you, as you may loose the sense of direction too.
@@RCToysAventuraSmartSolutions thanks i will give it a try again! Seems like a frustrating machine for a novice
@@RCToysAventuraSmartSolutions again thanks! Play safe with this covid! and i will be giving it another try here in canada
Hiw to calibrate anpro E88 drone and do we need to calibrate everytime we use the drone
inital factory calibration is necessary every time you turn on the drone, while flying, you will need to calibrate the drone once.
How did you turn off headless mode off
Thank's for sharing, it was helpfull
I have the same drone. When i start fly after 15 seconds led blinking and landing
check the batteries and if they are charged well, may be you have a faulty charger.
I have a drone K99 Max how i cAn calibrate? Help me please
This drone is soo aggregating to use! First time I started it, it flew super fast towards my TV !!! Good thing it did not break it!! Now when I try to turn it on, it immediately flights to the left! I tried your factory setting and one of the propellers won't even turn on anymore so what turned off everything and not it won't connect... I just see the drone with blinking lights. =(
This is why it is advised not to use automatic take off button and fly it up manually. Same happens to many of us and with other non-gps drones too!
the propeller gears or supporting elements may have been damaged or stuck due to impacts
@@RCToysAventuraSmartSolutions thanks for the info, i threw it out 😄🙂 it is soo damn useless, cheaply made.
help my xh4k doesn't callibrate anymore when i rotate the right controller up the drone light flicker becomes slow but when i rotate it done it doesnt stop flickering like it used to be
Thanks for the video man, it was helpful
What it is this drone model?
Eachine E58, also called as DroneX Pro / Skye Drone / S168 Drone.
You can check out the video description, all info is included in this section.
@@RCToysAventuraSmartSolutions Thank you, this info helped me alot!
What can I do if its still trying to do wheelies ie front props lift up 1st still even after calibration
Perform factory calibration reset on a plane surface, and then calibration in the air, if it does not help, check if there is debris in the propellers mechanism. If you replaced propellers, check if they were installed properly, the blades should be heading the right direction. Try a different well charged battery.
Did you fix it
In my dron have a little legs in front. Maybe due this it is not calibrate.
I have E88 . After it crash with wall dorne drift to left forward.
Now see you are remove it legs..
I will try this also thanks
yes, legs fall off sometimes, but they should not affect the calibration.
@@RCToysAventuraSmartSolutions then i check, front left engine work but wing not spin.
Why do mine always suddenly stop in a middle of a flight?
What do u mean by stops? Turns off or lands? It may land on its own if the battery is low.
the drone s89 is not flying, so i want to do factory reset but the drone is not resetting. I pressed the throttle lever and the directional lever at the same time which I angled to the button right corner but the drone is not factory resting. Pls any help!!!
.........👆👆👆
consult this technical support for any complain, request or enquiry.
Thank you!
fine tuning what is it for?
to avoid too much drifting in the air, to keep it stable in the air if necessary
How about e88 pro how to calibrate it correctly?
Did you fix it?
the video helps so much but what do i do if it turns a direction not a left or right it spins to a side what do i do in that case???
You need to practice, this is the most difficult part, when the drone rotates around its axis, due to wind for example, or you touch accidently the rotation stick, in such cases you need to see in what position the drone is and redirect it correctly.
Can you tell us the controls on how to fly the drone please?
please check the E58 playlist, there is a video on how to fly this drone.
HI, I have a question for you.
the question is:
Do you have to calibrate your drone every time you fly it or just the first time?
I’ll appreciate your help.
Thank you.
Yon need to calibrate a drone every time you turn it on. It does not mean it won't fly well if you do not do it, but it is advised to calibrate.
Please help. mine will not ascend in forward flight. If I let go of the right stick, then I can get it to ascend. but if I push forward on the right stick and up on the left stick at the same time it will just hold altitude or even descend sometimes. Super lame
It can happen due to wind and air flows, or when you fly forward in the highest speed mode, the air pushes the drone down. as the drone inclines forward a bit, the air pushes on its top surface and the ascend becomes difficult or too slow.
@@RCToysAventuraSmartSolutions okay yeah that makes sense. I guess it just doesn't have enough power to overcome the downforce. That's a bummer. I was thinking there's something wrong but it sounds correct what you're saying. I guess I better get a higher quality drone. I'm at the stage of flying where I'm good enough to do fast Forward flight but this thing won't cooperate
have a drone like this but for some reason it wont turn on, tried charging it and a blue light appears ont the battery. doesnt do anything when i charge it a little and put it back in
these are cheap drones, and things may go wrong, ask for replacement or try another battery fully charged.
I got my and it flips upside down front lifts up and flips
Hey man, how are you?
I have been having a problem, my drone's wifi doesnt show up, i bought it 2 hand and i cant seem to find a way how to do that, can you help me?
Sometimes it takes time for wifi connection to appear in the phone. Sometimes the wifi adaptor may fail due to humidity. Also check what wifi standard your phone and the drone are using. They could be 2.4 or 5 Ghz wifi and they should match on both the drone and the phone.
Did you do it?
Thank you bro
Are E88 and E58 different or there are the same ?
They are different, E58 is smaller, faster, more difficult to control, default battery has shorter flying time, but alternative batteries are available, in my opinion was more fun to play with. E88 is larger, thus slower, not as responsive to controls on higher speeds as E58, but is easier to control, with optical flow positioning, thus with better auto calibration, the controls are better designed, more intuitive.
how about calibration for e88 drone?
.........👆👆👆
consult this technical support for any complain, request or enquiry.
Thank you!
On p11 remote please
Thanks it worked
I have a skyquad drone and the controller is very different. Why? It's a push button and with brand new batteries it will not turn on
Some drones may have similar appearance but could be different models.
Hi i heve tried to calibrate my drone with joysticks but it doesn't work. I take the joysticks to the direction you said but o don't hear the sound that the calibration is done.thanks for answering.
have you synchronized the remote control with the drone first?
I have a different E58 drone that has a calibration button on the remote, it's the inner right trigger button.
My e88 doesn't have or Respond to those factory reset. Or how to factory reset my e88
E88 drone has a different combination for factory reset. Check the E88 playlist to find out how to calibrate E88 drone.
My drone just keeps on blinking I follow all the tutorials to bind it or whatever but it won't work. I keep charging it till its full and don't know what to do. I'm so close to just leave it in my closet to collect dust
How can I fix my drone please help me I hit it from on the wall
what is wrong with it? propeller working?
@@RCToysAventuraSmartSolutions yes the propeller is working but it doesn't fly up
@@RCToysAventuraSmartSolutions the right down propeller is slow and the other propeller is strong
@@elijahmark5371 it's happened to me how do a fix it
Boa noite aqui no Brazil eu tenho um drone e o problema dele ele sobe um pouco e desce fica fraco vc pode me ajudar
I had similar issue with mine but an expert on RUclips here helped me
Hey I got this new issue about the same drone you got,it keeps falling off when I try to hover and stable the drone to calibrate is there a problem there or I might just misclick the 360 roll button.
roll over button after you press it does not do anything until you press left of right button. then it would roll to the left or to right. not sure if i understand your problem, but calibration buttons should not be affected by roll buttons, they just incline the drone a bit to the left right front or backwards.
@@RCToysAventuraSmartSolutions I found the problem after I inspect the inside electronics,I seems like the rear right motor wire tend to shake or when it crash ton of times the circuit where the motor is connected is not in placed anymore maybe it's not soldered well or I bought the wrong one because it doesn't support SD card insert.It doesn't even have the name called emotional drone in the front left arm so might be a scam.
Thank You for sharing
Thank you
I noticed your drone is still drifting a little after calibration, how can I make it hover still?
this model drifts a bit after calibration, it cannot be calibrated perfectly, as this is manual calibration, and there is no GPS stabilization in this model.
@@RCToysAventuraSmartSolutions thank you!
after u calibrated, bettery runs end
What do I do if it keeps saying no connection?
if you mean the app, check out other apps, they have upgraded versions and some do not work anymore as expected. I have a video about different apps for this drone, check out the e58 playlist on my channel. Other thing to try is to turn off all connections on the phone, like mobile internet, hotspot, and leave on only the wifi connection. Also, it is important not to turn on the app before turning on the drone, it may affect the app as well. Turn on the drone first, then connect to a phone via wifi and then turn on the app. If no wifi signal is detected, check if you have 2.4GHz or 5GHz wifi on you phone, wifi mode should be the same, the E58 drone uses 2.4Ghz wifi. Sometimes wifi module goes bad, this may happen if water gets on the wifi circuit.
I had similar issue with mine but an expert on RUclips here helped me
Why does my drone stay red those 3 that you have blue mines are red.
I need some help with mine, I was flying outside and then a gust of wind make me lost control of it then it crashed after I’ve wanted to turn it in but only the red light flashed and I can’t do nothing pleased someone
I had similar issue with mine but an expert on RUclips here helped me
@@TDUKbackup can you give me is name so I can contact him pls
@@christ71 that's the link to his RUclips page, when you get there, you'll see his contact
@@christ71 he's really a genius
@@TDUKbackup thx man
Pls help when I first tried the remote wouldn’t connect so I used my phone but now I can’t calibrate it
try turning on the drone first before you turn on the remote control, otherwise it wont connect. Check the batteries in the remote control as well. On the phone, you can use the same joystick combination to reset factory calibration. Slide your fingers on the screen after turning on the controls on the screen in the same direction as you would do it with sticks on the remote control.
Just received a 998 drone from my brother and when I try the calibration you are showing it doesn’t do anything. Am I doing something wrong?
not all drones may use the same button combination
Did it work
Gostaria de saber como aprender. Teria alguma coisa em português pra mim. Muito obrigado 👍
Im gonna try this on my K3
Im new to flying Drones so this video is helpful
Hi sir im new subscribers i ask if a drone P11 legit or clone
Can you help me
why my e88 drone cannot power on
Have you fixed it
Mine goes way out of control and it goes the whole way to the left it just wants to flip
Factory reset (factory calibration) should fix it. The drone should be on a plane surface.
It seems like my controller doesn’t even connect to the drone, how do I fix that?
First of all you should turn on the drone and then turn on the controller. If you turn on the controller first, it may not connect.
Have you fixed it?
My drone when it flies goes hard to the left and hits the wall
I have problem to connect to WiFi... unable to see the WiFi name in my phone...how to fix it?
Sometimes it takes time for wifi connection to appear in the phone. Sometimes the wifi adaptor may fail due to humidity. Also check what wifi standard your phone and the drone are using. They could be 2.4 or 5 Ghz wifi and they should match on both the drone and the phone.
You fixed it?
@@trcyjones no... 😞
@@kanagenthirannagarandran2750 I just got mine calibrated and it's working normal now.
@@kanagenthirannagarandran2750 although it's a youtuber that helped me fix it.
I have a e99 k3 drone it keeps drifting even if I calibrate
if a drone does not have GPS a bit of drifting is normal, there is always airflow that will make it drift, and at different heights it may drift differently, when flying closer to objects or to the floor you get different air pressure so it may drift differently too.
Did you fix it?
Bakit yung nabili kong e88 saglit lang lowbat wala pa 2 minutes lobat may nabibili bang orig na battery ng e88
why i cant connect my drone to wifi???
your drone cannot connect to wifi, the drone has a wifi transmitter which connects to your cell phone. Your cell phone should see a name of a drone among other wifi connections, usually a name is a combination of letters and numbers that indicate the camera resolution. Once you choose the drone's wifi signal, you can then open the app and connect to the drone.
@@RCToysAventuraSmartSolutions oh thank u so much .!!!it will be a big help😊😊😊i bought my xpro drone 2 weeks ago but i havent try to fly it...😊😊😊
Help my drone fly sideways 3 seconds after take off and crash
This video is very helpful thank you very much for it. But my Drone is a piece of junk. It doesn’t listen to any controls. Lol
pull the left control up and down in order to work
Why he sound like Johnny Depp
need volume cant hear
no matter what my drone keeps flying backwards
😀😀😀😀😀
you need to calibrate your camera position
I have the drone now
Bro I try everything you say step-by-step and still no salutation, I watch plenty other channels and still no salutation.
Pov:eres el único comentario en Español
4:45 ^_^
This model is sucks. U cant calibrate it. I tried it thousand times.
patience and practice is needed here. also it is important to choose comfortable environment to feel how it works. Better inside in a big room with a lot of space with no wind.
My drone just flew away and was lost - do NOT buy it - it never hovers always requires adjustment - It is rubbish
Sorry about that, I understand your frustration. This drone requires manual adjustment all the time and some practice. On the other hand, it is good for start, as you pay very little to get an opportunity to enter the world of drones and decide if you would enjoy it or not. My first attempts to control this drone were also frustrating but then it became a lot of fun and now I learned enough to get to another level. An expensive drone if lost could become a bitter experience as well, so it is a good drone for starters.
Mine almost did the same thing yesterday, my first day using it. The only think that stopped it from flying away, never to be seen again was a tall oak tree. What a piece of junk. I should have known better than to buy it.
That drone was not worth the $20 I spent on it..
Not proper landing
Poor demo. I only say that, because whenever you operated the controls, the remote was out of the picture. It was those you were doing it intentionally.
Thank you for your comment. It is still possible to get the idea of how to calibrate the drone, I have shown the location of the buttons on the remote control, you can hear the beeping sound when I press the calibration buttons.
It is not bad, it helped me a lot. Just have to use your brain, but I see in the comments that's it is not a common thing.
The Drone Sucks I have One
Thank you for your feedback. All cheap drones are for beginners, an opportunity to explore new technology, the first step to discover if this is something for you. This is a good opportunity to learn how to control a drone avoiding crashing, drowning or simply loosing an expensive drone or spending too much money on something you would keep on a shelf if it is something you would not enjoy.
I was getting frustrated with your repetitive instruction and with your monotone.. Make sure your videos are short.. 🤒🤒🤒