Hi Billy, I drove LGV from approx 1973, the first artic was an Atkinson, 180 gardener, 5 speed David Brown gearbox. I did bulk tipper work in 1990,s to 2010 If you were tipping animal feed and it had been raining, rolling up that sheet, back to front you had to rig rope running back to front, the wet heavy sheet is now above you. You ended up wet and dirty rolling that sheet up, muttering thing like god bless my soul when I get back im handing in my notice. The good old days. Trev.
We were getting easy sheets in the year 2000s and weighers in the cab at about the same time before then I've loaded dust out of quarries, no sheet, sprinkle water over the dust, form a crust, no dust cloud. I know you can't do that today, we just had to improvise then. I think most things now are for the better, Billy. tractor units, trailers and drivers hours all better. CPC I think is a waste of your time. when I first started driving in the 1970, I was told do an hour or two before you write in your logbook, that was normal mate. Trev.
@@trevorframpton892 that's right your not allowed to leave any quarries with out your sheet been on I've just been furlough when I get back I'll try and get a video of a quarrie might bring back some memories 👍
Cheers Billy, I'd like that, I ended up on fridges. a bad leg finished me in 2014. I work part-time driving a train, im furloughed.im 70 years of age. I miss those trucks like a drug. Cheers, Trev.
Congratulations on passing. Reversing is hard at first then one day it will all come together always take your time and if you're unsure get out and look even ask a driver to watch for you 90% of driver's will always help
@@billybarton3258 cheers pal. I’ve got a trial in a ridged tipper later this week. Hopefully get a start then progress into a class 1 tipper. Fingers crossed I’ll get a job 🙏🏻🍻
Interesting video I happened upon by chance. I'm a driver myself and living in Canada for the past 12 years so imagine my surprise when I find that you're loading in New Holland, which is where I am from. Just as a side note, nothing going to New Holland would be anywhere near large enough for 200,000 tons. Most ships would bring in 2000-4000 tons of cargo.
Nice honest video without that BS that comes with others. I drive occasionally just to keep current but dont do it full time and those tippers do scare me. Class 2 be ok but class 1 would probably have my arse twitching like a rabbits nose lol
No Tom asking me to go back and i thought it was a bit to soon so I handed my notice in with breaking it in3 places it needed abit of extra time now it's ok will after wait and see wot happens i would'nt mind coming back
Thanks for the nice comment the contract I'm doing at the moment you would not be able to video but I'm hoping to move on to the low loaders shortly and should get some good videos going 👍
Job done. Nice one Drive. I am seriously thinking tippers for my next adventure. Are your trucks manual or autos? Considering some of the places you go, I could see an argument for a manual, though most drivers prefer an automatic box these days.
If you're doing grain you will be doing a lot of farm work which is always down narrow lanes and weight limit 😱 once you master that nothing will bother you if you're ever unsure always get out and look or if there is anybody there just ask them to watch you in
God, the hours I spent as a kid with my old man in places like this back in the 70s, he did mostly this for 40+yrs with a firm called A G Watts, went bust a while back. Ever seen the hose let go on a ram? Funny, not for the driver, but still funny. 😁
![Vlog #102 - Tips & tricks for new class 1 (C+E) HGV drivers [Part 1]](/img/1.gif)
Hi Billy, I drove LGV from approx 1973, the first artic was an Atkinson, 180 gardener, 5 speed David Brown gearbox.
I did bulk tipper work in 1990,s to 2010 If you were tipping animal feed and it had been raining, rolling up that sheet, back to front
you had to rig rope running back to front, the wet heavy sheet is now above you.
You ended up wet and dirty rolling that sheet up, muttering thing like god bless my soul when I get back im handing in my notice.
The good old days. Trev.
The sheet on this one runs side to side I do have some clips on other videos of winding the sheet back
We were getting easy sheets in the year 2000s and weighers in the cab at about the same time
before then I've loaded dust out of quarries, no sheet, sprinkle water over the dust, form a crust, no dust cloud.
I know you can't do that today, we just had to improvise then.
I think most things now are for the better, Billy.
tractor units, trailers and drivers hours all better. CPC I think is a waste of your time.
when I first started driving in the 1970, I was told do an hour or two before you write in your logbook, that was normal mate. Trev.
@@trevorframpton892 that's right your not allowed to leave any quarries with out your sheet been on
I've just been furlough when I get back I'll try and get a video of a quarrie might bring back some memories 👍
Cheers Billy, I'd like that, I ended up on fridges. a bad leg finished me in 2014. I work part-time driving a train, im furloughed.im 70 years of age.
I miss those trucks like a drug. Cheers, Trev.
Very interesting to a new pass class 1, cheers pal 👍🏻
Congratulations on passing. Reversing is hard at first then one day it will all come together always take your time and if you're unsure get out and look even ask a driver to watch for you 90% of driver's will always help
@@billybarton3258 cheers pal. I’ve got a trial in a ridged tipper later this week. Hopefully get a start then progress into a class 1 tipper. Fingers crossed I’ll get a job 🙏🏻🍻
Very good time to get a job there a massive shortage at the moment everyone needs driver's
Great vlog mate keep up the good work 👍🚛👍🚛👍
Thanks
Interesting video I happened upon by chance. I'm a driver myself and living in Canada for the past 12 years so imagine my surprise when I find that you're loading in New Holland, which is where I am from.
Just as a side note, nothing going to New Holland would be anywhere near large enough for 200,000 tons. Most ships would bring in 2000-4000 tons of cargo.
Hope it brought back good memories
Good video Billy, nice one to watch without loads of background music
Thanks Kevin think this was my first video I made I'm still new to you tube so I'm learning new stuff all the time 👍
for a minute I thought you were gonna try and park that thing in Lidl car park haha
I have a few times when I've needed supplies 😅
Nice honest video without that BS that comes with others. I drive occasionally just to keep current but dont do it full time and those tippers do scare me. Class 2 be ok but class 1 would probably have my arse twitching like a rabbits nose lol
Thanks for a great review 👌
Hope you will be back soon with more video's love them 👍
I've got a video coming out soon
Thanks Billy can't wait
Hi buddy hope you and family are keeping well anymore vlogs coming buddy
Should be getting some done soon
Your just a natural billy
Thanks for watching and leaving a nice comment
I thought it was you Steve hope you're good all the horsley and Pearson have been furlough for the last 5 week's are you working at the moment
No Tom asking me to go back and i thought it was a bit to soon so I handed my notice in with breaking it in3 places it needed abit of extra time now it's ok will after wait and see wot happens i would'nt mind coming back
Hi buddy hope is allwell with u and family miss ya vlogs mate
Thanks for the nice comment the contract I'm doing at the moment you would not be able to video but I'm hoping to move on to the low loaders shortly and should get some good videos going 👍
Job done. Nice one Drive. I am seriously thinking tippers for my next adventure. Are your trucks manual or autos? Considering some of the places you go, I could see an argument for a manual, though most drivers prefer an automatic box these days.
These are auto does make the job easier you certainly go to strange places with the tipper's
Waisting your time guys
I'm starting tippers soon mostly grain is all places so claustrophobic? I'm a new class 1 driver places like this scares me 😱
If you're doing grain you will be doing a lot of farm work which is always down narrow lanes and weight limit 😱 once you master that nothing will bother you if you're ever unsure always get out and look or if there is anybody there just ask them to watch you in
@@billybarton3258 thanks for info mate 😱
just found your channel and subcribbed
Thanks stu hope you enjoy the videos
It was amazing. Thanks
Thank you
To much background noise during commentary But other in that Good Job mate 👍🏻
Thanks for the feedback this was my first video I've made so lessons to be learnt I didn't expect it would even get 20 views 👍
God, the hours I spent as a kid with my old man in places like this back in the 70s, he did mostly this for 40+yrs with a firm called A G Watts, went bust a while back.
Ever seen the hose let go on a ram? Funny, not for the driver, but still funny. 😁
One of our fleet bent the ram it snapped in half and smash through the cab.
The driver was ok but the truck was a right off
Thank you!