@@Peter_Mueller1975 but what’s wrong with motorized bikes? I don’t see why people wouldn’t rather sit and have more control (in most cases) ...and also look more badass since it’s pretty much a motorcycle, but that’s just my two little pennies. Plus most people already have an old cruiser/mountain bike laying around that can easily be converted with an $80 kit from Amazon
@@RedHotChiliPeppersOfficial I used to have a sport like 12 years ago with everything to make it look cool with billit bits and loud pipe. I got drunk last weekend and bought another sport and want to keep it quoted but want to make it faster. Could you do a vid on explaining the spindle sizes to me please
Great Videos! Really entertaining, many greatings from Germany. I'll receive my GoPed this week, a late 80s Sport Model in decent condition. But it's totally forbidden to drive it on the open streets, i could loose my drivers license for doing so. We'll see :D
Thanks! That's very exciting! Even if you can't ride it on the street, they're super fun riding around in parking lots or setting up cones to race around! Thanks for watching and supporting! You should make a video of yours!
Normally if it were his build he'd do the speed runs. But since it's mine, and I built it to carry my large frame, I did the speed runs to see how fast it could carry me! It easily would've gone 26 with him on it. Stay tuned for the new project, putting a 36cc engine on a new frame!
Power what? The spark plug is several thousand volts. Not good for powering anything. If you're wanting a light, led bike lights that are rechargeable are a good option!
Wonder how it will run if you do some light porting in the head widening both ports and lowering a little the intake port and raising the exhaust and porting the transfers. Easily pick up 4-5 mph and fatten up that powerband
Been thinking about this a lot. A buddy of mine works for a power equipment dealer and ports chainsaws pretty frequently. Might have him take a stab at the rovan 36
@@hondayamahafan porting is were it's at. I did 27 mph on my G23LH XPed with just intake , .950 spindle and jet pro pipe. Sold pipe bought walbro carb had my head ported with port matched intake manifold and open exhaust and did 34 mph running on vp112 jet pro slowed me down got an engine trix pipe similar looking like yours and picked up almost 3 mph.
I’ve had some monsters build for ground up g260 with a sikk toys center bleed and a 850 spindal I was gone I only weight like 130 at the time my last build was a g240 zenoah 850 spindal block rim I put over 1 k in it
These carbs don't have jets that you change out, they have needle jets that you adjust by screwing in and out. But yes, you need to retune the carburetor for the new pipe
Any stock goped can run 25+mph, but when ONLY a spindle is changed you sacrifice lowend acceleration for top end speed and vis versa. When parts are changed AND then a spindle is changed, more top speed can be achieved without sacrificing low end power.
Video coming soon for new top speed run! This was set up for riding in a location with a lot of relatively long and steep hills. Now that I'm in a flat area I'm moving to a bigger spindle.
So, a larger spindle and there is where your top speed will come from as you have the torque now. Love it, keep it up sir. Had one when I was 14yrs old. Rebuilding one now with my boys...
@@hondayamahafan Awesome man, keep up the good content! I would love to see more goped stuff as you are the only current you-tuber who posts goped stuff. Maybe a budget craigslist goped build in the future?
That's a good idea! I've currently got almost enough spare parts to build another whole sport. Also I'm planning on building an air tire this summer. Probably a gsr 46 or a trail ripper!
@@hondayamahafan Nice, i would recommend a trail ripper, i have never owned one but they look hella fun to jump around on. Maybe you could build a rugged off road sport though, as you already have a sport for the street. Maybe you could find a way to mount some trail ripper wheels and tires on a sport!
You have to tune the carburetor on any goped if it has an adjustable carburetor on it. Tuning it increases the performance. In this case I had to re-tune it to run richer with the better flowing exhaust.
do you have a link to the throttle kit or does that engine come with the spring and stuff to attach because my current sport motor if i was to get the Rovan29cc rc motor you show
Dude please help. What size bolts did you get to make your air filter fit? I got the UFO small cone and velocity stack for my g23lh and the bolts are barely not long enough. Please help
@@hondayamahafan thanks bro. Live ur channel. I love my sport too. This winter im going to get a GSR ped (chain) and make these sport mmt custom daily driver and the GSR my custom weekend baby, lol
The flange that bolts to the motor? That came with the pipe. Its a "Sikk Chrome End-Bleed Torque Pipe" that I bought from DDM. If youre talking about the silencer, its a generic one I got off of ebay made for 1/5th scale RC Cars.
Dang, i have a goped sport that has a pipe on it but its only 23cc and i just bought it from someone, and im currently fixing her up, can you help me find some upgrades i can do to make it faster?
@@thatone_3rdgen Sorry I told you wrong. The goped in this video has a 29cc motor that is a drop in replacement for the factory motor. Check out billetboard.com, and gopednation on Facebook. Easy speed mods are bigger spindle, pipe and an air filter/vstack setup. Have fun!
Sorry for such a late reply, but this is the original deck that came with it. I sanded it and stained it with some outdoor wood stain then got a new set of GoPed grip tape from DDM racing for $15
It's called a tuned pipe because the design is specific to these engines and maximizing power. You don't actually "tune" the pipe, it's tuned in it's design. You tune the carburetor to make it run better
Crotalus_ 420 there are a ton of riders who have chain driven peds (GSR’s) that hit 50-60MPH, fastest I’ve been was 47mph on my old race ped and it was scary as fuck, but the adrenaline
Gopeds are getting cool again, hell yeah
so much cooler than e-scooters
@@Peter_Mueller1975 but what’s wrong with motorized bikes? I don’t see why people wouldn’t rather sit and have more control (in most cases) ...and also look more badass since it’s pretty much a motorcycle, but that’s just my two little pennies. Plus most people already have an old cruiser/mountain bike laying around that can easily be converted with an $80 kit from Amazon
The only advantage of a motorized scooter I see is that it’s more portable.
its been cool wtf
They're cool but they sound so annoying I'd probly run taller gearing so it stays bogged more
Just came here to say... 2 smokes don't go Braaappp... they Go RING A DING DING DING DING.. 😆 🤣 😂
I still got one of these in the shed now. All I need is a new engine.
25 is pretty fast for .625 spindle. I bet with a .850 you’d hit at least 30
Slavin it up with the stripes i like it
Probably helped 1-2 mph
Bro I’m glad your a big guy like myself
Appreciate the big man support! Thank you!
Haha word I’m a bells fella but these things are so fun I just got my sport and ordered some goodies for it
Please keep making videos they are amazing your energy is amazing brother!!
Thank you! Been a long time since we've made a video. Mostly been working. Still have all the toys though!
Wish I wouldn’t have gotten rid of my super x ped a little while back. Had it since the early 2000’s
I'm never getting rid of mine!
Yo need a BIGGER SPINDLE LOL
750 long drive w a third bearing support!
800,850,.900
@@RedHotChiliPeppersOfficial I used to have a sport like 12 years ago with everything to make it look cool with billit bits and loud pipe. I got drunk last weekend and bought another sport and want to keep it quoted but want to make it faster. Could you do a vid on explaining the spindle sizes to me please
The bigger guy in that was doing the test runs reminds me so much of Nolan from @donutmedia and I love it
Thank you! Much appreciated!
Nice matching jumpsuit lol you guys fing rock
Great Videos! Really entertaining, many greatings from Germany. I'll receive my GoPed this week, a late 80s Sport Model in decent condition. But it's totally forbidden to drive it on the open streets, i could loose my drivers license for doing so. We'll see :D
Thanks! That's very exciting! Even if you can't ride it on the street, they're super fun riding around in parking lots or setting up cones to race around! Thanks for watching and supporting! You should make a video of yours!
Try having the smaller man do the test run, (if He's willing to), you may gain another mph or 2. It's worth a try at least.
Normally if it were his build he'd do the speed runs. But since it's mine, and I built it to carry my large frame, I did the speed runs to see how fast it could carry me! It easily would've gone 26 with him on it. Stay tuned for the new project, putting a 36cc engine on a new frame!
hondayamahafan when you do link the engine
Can u please wire a little or big light to the spark plug.. really want to know if it's possible to power off the spark...
Power what? The spark plug is several thousand volts. Not good for powering anything. If you're wanting a light, led bike lights that are rechargeable are a good option!
You can not do that.
Wonder how it will run if you do some light porting in the head widening both ports and lowering a little the intake port and raising the exhaust and porting the transfers. Easily pick up 4-5 mph and fatten up that powerband
Been thinking about this a lot. A buddy of mine works for a power equipment dealer and ports chainsaws pretty frequently. Might have him take a stab at the rovan 36
@@hondayamahafan porting is were it's at. I did 27 mph on my G23LH XPed with just intake , .950 spindle and jet pro pipe. Sold pipe bought walbro carb had my head ported with port matched intake manifold and open exhaust and did 34 mph running on vp112 jet pro slowed me down got an engine trix pipe similar looking like yours and picked up almost 3 mph.
@@hondayamahafan the rovan cylinders are junk stock. I ported my rovan 36cc and it’s a huge difference in power.
Will keep that in mind. My friend @SuperDaveOutdoors ports chainsaws. Might ask him to do the rovan
mine is bone stock with a changed spindle hitting 28 i’m definitely a smaller rider though
i had a gsr bigfoot that did 40ish. I miss that thing. Stupid neighbors complained to much lol
did u ever get a silencer?
I’ve had some monsters build for ground up g260 with a sikk toys center bleed and a 850 spindal I was gone I only weight like 130 at the time my last build was a g240 zenoah 850 spindal block rim I put over 1 k in it
I have a goped gsr sport whit a mini rhino pipe, and a 52 theet sprocket. Runs 40 to 45 km/h on my zenoha gz25n23. Great noise to
when you bought the pipe did they advise you to rejet the carb?
These carbs don't have jets that you change out, they have needle jets that you adjust by screwing in and out. But yes, you need to retune the carburetor for the new pipe
Any stock goped can run 25+mph, but when ONLY a spindle is changed you sacrifice lowend acceleration for top end speed and vis versa. When parts are changed AND then a spindle is changed, more top speed can be achieved without sacrificing low end power.
Video coming soon for new top speed run! This was set up for riding in a location with a lot of relatively long and steep hills. Now that I'm in a flat area I'm moving to a bigger spindle.
@@hondayamahafan nice, that's awesome. Anything above 30, get a rim-lock rear rim. It definitely gets sketchy.
It's pronounced A.D.A.
also, end bleeds are great for torque but loud, center bleeds are better for getting 2-3mph gains. Which motor do do have?
Good to know. It's a Rovan 29cc. A clone of the Chung Yang. I'm going for torque over top speed. I've since gotten a silencer for it as well.
@@hondayamahafan What size spindle? I have a GP290 (CY) w/ stuffed crank and a .710 spindle and ive gotten to 31.6, im 6'1 245lbs.
.625, it's set up for hills
@@hondayamahafan I'd rock a lower and wider bar setup, it makes it way more stable. What else are you planning to do with it?
I'm basically starting over. Xped frame modified to fit a 36cc.
its geared way too low
and does it have no clutch or why does it always spin the wheel?
Where are you guys getting your expansion pipes from?? Trying to find some for my GoPeds. But cant find them anywhere.
I bought this one from ddm. It looks like it's still out of stock but they still have the dominator line of pipes
So, a larger spindle and there is where your top speed will come from as you have the torque now.
Love it, keep it up sir. Had one when I was 14yrs old. Rebuilding one now with my boys...
.850 spindle with a built g260rc and pipe. Did 43 mph down a hill on gps. It felt like 100mph with speed wobbles and all
Jesus😳 I just bought a .750 spindle, new tire and frame extensions, so be on the lookout for a new video on the ped coming soon!
Very nice moter scooter, mine goes a lil faster at 32 mph yet that is still a very nice scooter
What size is that is it 40mm I got zenoah 5600 g23lh think of put a cheap pipe on
Amigo por gentileza ..qual o nome desse escape
Lovely sound
Goped update soon?
Planning on getting it out tomorrow, videos almost done!
@@hondayamahafan Awesome man, keep up the good content! I would love to see more goped stuff as you are the only current you-tuber who posts goped stuff. Maybe a budget craigslist goped build in the future?
That's a good idea! I've currently got almost enough spare parts to build another whole sport. Also I'm planning on building an air tire this summer. Probably a gsr 46 or a trail ripper!
@@hondayamahafan Nice, i would recommend a trail ripper, i have never owned one but they look hella fun to jump around on. Maybe you could build a rugged off road sport though, as you already have a sport for the street. Maybe you could find a way to mount some trail ripper wheels and tires on a sport!
Put someone skinner it will go like 28 to 30
or loose some weight XD
Please keep the videos coming!!
We’re can I buy one like that
You can still buy them on the goped website but they're very expensive new. I'd look on Facebook marketplace
Did you not have to tune up the carb or is it original air filter?
You have to tune the carburetor on any goped if it has an adjustable carburetor on it. Tuning it increases the performance. In this case I had to re-tune it to run richer with the better flowing exhaust.
is that a 29 cc engine? ifso do you think do as good a job on a g23lh??
Yes it's a 29cc. Yes it will make a g23lh wake up. Mo powa
I just pulled my old GoPed out the shed. You willing to help me get it working again ?
where did you buy the pipe?
Put a bigger spindle and handlebars on it
Hello, how and where do I send this space to Portugal and price for engine (huasheng / kesei 63cc) / uber scoote is the 2x 71cc
Sorry, I have no idea
do you have a link to the throttle kit or does that engine come with the spring and stuff to attach because my current sport motor if i was to get the Rovan29cc rc motor you show
Throttle bracket: www.davesmotors.com/Carburetor-Linkage-for-CY-Engines-.html
Swivel: www.davesmotors.com/carburetor-linkage-arm-with-offset-and-swivel.html
The throttle set up for the Rovan is different than the one on the stock engine, you need these parts and it'll work fine
@@hondayamahafan Oh man thank you so much thats what I thought I just wanted to make sure you been so much help I really appreciate it.
Sure thing! Happy to help
Nice footage keep it coming
Thanks! New Goped video coming soon!
Dude please help. What size bolts did you get to make your air filter fit? I got the UFO small cone and velocity stack for my g23lh and the bolts are barely not long enough. Please help
I'm honestly not sure, the first ped I bought came with it. They're probably ~5mm longer than stock
@@hondayamahafan thanks bro. Live ur channel. I love my sport too. This winter im going to get a GSR ped (chain) and make these sport mmt custom daily driver and the GSR my custom weekend baby, lol
Where do you get that exhaust flange thing
The flange that bolts to the motor? That came with the pipe. Its a "Sikk Chrome End-Bleed Torque Pipe" that I bought from DDM. If youre talking about the silencer, its a generic one I got off of ebay made for 1/5th scale RC Cars.
What is the kw output
hi where did you order a pipes ??
davesmotors.com
Where can I buy such an exhaust
Where do u buy these
Hey man what kind of motor does the goped have, and how many cc
It's a 36cc Rovan motor. Be aware it's not a direct fit. You have to slot the mounting holes and widen the center hole
Dang, i have a goped sport that has a pipe on it but its only 23cc and i just bought it from someone, and im currently fixing her up, can you help me find some upgrades i can do to make it faster?
@@thatone_3rdgen Sorry I told you wrong. The goped in this video has a 29cc motor that is a drop in replacement for the factory motor. Check out billetboard.com, and gopednation on Facebook. Easy speed mods are bigger spindle, pipe and an air filter/vstack setup. Have fun!
When i click on the link it goes to a blank page
What motor and spindle do you have
Rovan 29cc with a .625 spindle
I have a stock lh that does 22 and I’m 240 lbs 🤔 just got the 800 spindle hopefully gives some speed
how much are the pipes
Love it man!!!BTW where did you buy that original deck for it.
Sorry for such a late reply, but this is the original deck that came with it. I sanded it and stained it with some outdoor wood stain then got a new set of GoPed grip tape from DDM racing for $15
What motor u tuning
What cc engine have you got on it?
In this video it has a 29cc engine on it!
How do you toon the pipe
It's called a tuned pipe because the design is specific to these engines and maximizing power. You don't actually "tune" the pipe, it's tuned in it's design. You tune the carburetor to make it run better
How many cc engine does it use?
This is a 29cc engine
Rovan???
Yes
@@hondayamahafan
Spindle, what number is it?
.625
What cc is that
29cc
Yo bro that’s a nice motor scooter
Thanks!
Which motor is better G2D or g290rc
G290rc. G2Ds are old school and small displacement. Get a 290
hondayamahafan or gp460?
@@blakejohnson5733 depends on application. You can't easily fit a 460 on a spindle hard tire.
How much to get a pipe like that
I got it while it was on sale at Dave's Motors (DDM) for $70. Regular price is $85. WORTH IT!!!
I have a running Big Foot for sale in East TN on tha low...
Cute matching outfits hahaha
nice man
Hay man do you wanna sell the ADA stalker?
yall have a small leak 2:53 nvm sorry it was thw wheel turning lol
Come out of the Dinosaur age, and get an Electric Scooter !
Electric scooter = no braaaap :'(
@@hondayamahafan very true
Make more goped vids
Now imagine doing 50+ on one...lol
Crotalus_ 420 there are a ton of riders who have chain driven peds (GSR’s) that hit 50-60MPH, fastest I’ve been was 47mph on my old race ped and it was scary as fuck, but the adrenaline
My homemade ped does like 30
Ricky mine does 47 too and it’s suuuper scary😂
I think that pipe its to big for the 25cc sport motor,
Please stay connected new friend from 🇬🇧
Hi! I've seen some of your videos! Thanks for watching mine!
Running
Was that a joke?
i have a dbx massive gas scooter 43 cc
25 is not fast 😂😂😂 try doing 52 on a goped gsr46r
May 6000 ba na binibenta kayo at San pwd bumili #09388440266
May not be "fast" but with the sketch factor on 6" hard tires it feels like a hundred! I'd love to ride a gsr46r I've never ridden an air tire ped
@@hondayamahafan yeah thats true, its so fun on my gsr46 just chilling at 50
Nice exhaust pipe!!
I made exhaust too, look my video
Probly should learn how to actually use a radar gun…
Slow
Bro I’m glad your a big guy like myself
Where did u get ur motor
EBay. It's a Rovan 29cc. I think I paid ~$120