I can't understand why this is not sealed directly out from the factory, it's very fast to do and very good for people who lives in country like mine where there is a lot of rain. Maybe it's not good for the motor ?
Hello friend, I follow your work from far away, could you help me, can you tell me how many bearings the rear motor of a kaabo has King gt pro, and if possible can you tell me the measure or reference
There are two bearings in the rear motor. The bearings are listed in the description. On my most recent video. Amazon links. ruclips.net/video/VGUj_NPQbjU/видео.html
Hola amigo, sigo tu trabajo desde muy lejos, tu me podrías ayudar, me puedes decir cuantos rodamientos trae el motor trasero de un kaabo King gt pro, y si es posible me puede decir la medidao referencia
This is a experiment, currently live where it’s really rainy and hoping to keep water out. I would assume there will not be an issue with condensation. At the end of the day it’s just a tiny bit of silicone. The motor is designed to be sealed..
@@StillRollin_Official Wonder why they didnt seal them from factory. Seems like the brand just wants its users to buy more products from them after initial purchase.
Hello, the real solution to make an engine waterproof is to apply either: Fluid film, or corrosion X these are two anti-corrosive products, approved by NASA, Thanks to this, I sometimes completely submerge my engine
do you spray it directly on the wires or just on metal or on the holes that go into the deck? where do you spray it. Can you give it a detailed description please.
@@m.mmiirr8799 Hello my friend, I suggest you buy both the spray version and the liquid version. How does it work? For your two engines, you need to submerge your coils in the liquid, as well as your Hall sensors. For the inside of your electrical cables, you use the spray. You also use the spray to make your screws all over your scooter waterproof, to prevent corrosion.
Ne, ne ne!!!! A to nejdůležitější neudělal, utěsnit otvor pro kabel. Předpokládám, že ten tmel je elastický a nezatvrdne. Na toto utěsnění by stačila vazelína. Konstrukce motoru je katastrofa. Nedostatečná izolace, chybějící bandáž a lakování.
i would use high temp rtv silicone personally but otherwise awesome video!
Thanks for the video!!!!
On which site can I buy a kaabo mantis gt v2 front motor?
Can't wait to see the video of the motor that wasn't water proofed
Video will be up next week hopefully ⚡️⚙️
Opening 72v electric motor with water damage (kaabo wolf) (electric scooter) SEAL YOUR MOTORS! ⚡️⚙️
ruclips.net/video/64fIy8e3fa0/видео.html
Video is posted
I can't understand why this is not sealed directly out from the factory, it's very fast to do and very good for people who lives in country like mine where there is a lot of rain. Maybe it's not good for the motor ?
on the rotor side i see you dont have a rubber seal over the bearing is that ok? mine seems damaged or not seated right and seems to squeak alot
How is it currently holding up?
Say it with me: Kaabo (emphasis O, like Taco). Why do so many people say Kaboo? Makes me feel like it’s going to blow up or something… KABOOM! 💥💣
Haha that’s funny
Hello friend, I follow your work from far away, could you help me, can you tell me how many bearings the rear motor of a kaabo has King gt pro, and if possible can you tell me the measure or reference
There are two bearings in the rear motor. The bearings are listed in the description. On my most recent video. Amazon links. ruclips.net/video/VGUj_NPQbjU/видео.html
And yes, you could add xt 60 connectors or XT 90 connectors that way you could remove it. Get creative design something.
dobrý nápad. Ale půjde to velmi špatně rozebrat. A co kolem přívodního kabelu. ten prochází přes osu. Nepoteče ti do motoru ještě přes kabel?
Hola amigo, sigo tu trabajo desde muy lejos, tu me podrías ayudar, me puedes decir cuantos rodamientos trae el motor trasero de un kaabo King gt pro, y si es posible me puede decir la medidao referencia
FOCUS ZOOM UP THE CAMERA PLEASE
I had a gotrax motor fail because the zip tie was broken and flopping around inside the motor.
Most of water issues is from the middle where is the power cord ❤.torque the bolts next time
Will this not create condensation within the motor?
This is a experiment, currently live where it’s really rainy and hoping to keep water out. I would assume there will not be an issue with condensation. At the end of the day it’s just a tiny bit of silicone. The motor is designed to be sealed..
@@StillRollin_Official Wonder why they didnt seal them from factory. Seems like the brand just wants its users to buy more products from them after initial purchase.
@Gavin Evans your right. Motors should be sealed from the factory.
@@StillRollin_Official I agree. GREAT video, THANK you for sharing this with us :D
Hello, the real solution to make an engine waterproof is to apply either: Fluid film, or corrosion X
these are two anti-corrosive products, approved by NASA,
Thanks to this, I sometimes completely submerge my engine
do you spray it directly on the wires or just on metal or on the holes that go into the deck? where do you spray it. Can you give it a detailed description please.
@@m.mmiirr8799 Hello my friend, I suggest you buy both the spray version and the liquid version. How does it work? For your two engines, you need to submerge your coils in the liquid, as well as your Hall sensors. For the inside of your electrical cables, you use the spray. You also use the spray to make your screws all over your scooter waterproof, to prevent corrosion.
Ne, ne ne!!!! A to nejdůležitější neudělal, utěsnit otvor pro kabel. Předpokládám, že ten tmel je elastický a nezatvrdne. Na toto utěsnění by stačila vazelína. Konstrukce motoru je katastrofa. Nedostatečná izolace, chybějící bandáž a lakování.