I had a heap of trouble getting old tyres off and new ones on ... its harder than it looks ...I tried various techniques but came to the conclusion its a two-person job. I put a lot of scratches and marks on the rim and was really surprised the tyres didn't leak ... as that would have been a major one to fix ... be REALLY careful you don't strip the heads on the rotor screws when removing ... and remember to put LOCKTITE on every screw or bolt you put back on ...
ruclips.net/video/Gg3w8yqQEH8/видео.htmlsi=B82iyMm0SIVPx-LR check this video how you can't get scratches and make more easy to change and install the tires I had the same issue with the tire from the back,specially when it's new scooter u may having the problem to change the tires as like me
Yer I don't have enough knowledge to know why ? .... but I have to say that the performance of my scooter lets me forgive any of the other issues ... I've had it now for over 12-months and really learnt to respect the consequences of things going wrong ... I've had 2 near-death moments that I was lucky to walk away from - so PLEASE be careful.
if you had some wood clamps theres a way to remove and reinstall the tires without levers at all. I use about 6 zip ties to get it on the rim with some commercial tire lube it goes right on. as for pulling em off use a pair of channel locks to compress the tire together then put about 4 or 5 clamps around the tire and you can pull it right off. no dents on your rims. Did it just yesterday on a teewing mars
Great video , but I wish you showed you putting the new front tire on . Ive done this but having trouble getting the front wheel back in between the forks with the clips installed .
I have a fieabor q06p. Im gonna put street tires on it. This video is pretty much the same concept of changing tires on an electric scooter. Thanks for the video 💯
Dude your smart using zip ties im getting ready to buy one of these and i always do my research on fixing and maintenance before i get anything and this vid was so easy super fast loved it thank you both for a great video guys have a blessed day🙏👍🤗
Did you get this scooter? Any issues or changes you've had? I've read the suspension, brakes and lack of water proofing aren't great. Debating on this scooter.
Its a good scooter I love it just don’t ride it in the water at all. I rode it in the water and water seeped into both of my motors and killed them both. it also leaked into the battery compartment too didn’t damage it thank god I also blew out a controller because it overheated from trying to ride it with the Brocken motor back to my home
I used a DeWalt 1400 torque impact wrench to remove the bolts on my scooter sometimes the company puts them on too tight! Invest in a impact wrench you will thank yourself! 😂
Off topic, sorry! I had to change the tire on my WWX Pro and cant get the tire and rim to go back on without removing the inside washers(the ones that go on the axel and clip into the frame)? Is there any way to expand the rear frame so that the washers can clear the frame to install the rim correctly? Without the washers the rear motor cable binds on the motor hub and frame. Voro has been no help with this!
Hey man... My wokf king is dead... Display was blinking showing voltage dropping till turn off... Now is not even turning on... Battery has voltage and it is charging... I tested a new display and still nothing... Any help?
@@Rayalas323 hey did not resolved... But helped. After disconnected the controllers... And waited and tested... I disconnected again and tested the voltage. The remain voltage in the main controller was in 2.7V, for the secondary was in 8.6... So... I tested the battery. The plugs at the main controller... 0V. The plugs at the second 86.1V... I guess mu bms or battery has some problems...
Yeah it might just be a BMS but I’m not sure tbh. Hopefully it’s a simple fix, bummer to see a scooter down :( Try finding a lithium ion battery builder in your area to diagnose it. Keep me updated.
Hey thanks for the video! I am currently working on changing my back tire on my wolf warrior 11 plus. I have a question, I don't have zipties atm and it s a pain in the butt to put the new tire on.. So i want to buy some zips but I was wondering what length are those u'r using? Thanks so i don't buy to smalls ones! Happy new year and Cheers
I just came across your channel and subscribed. I saw you had the steering damper on the kaabo wolf warrior and I found the link for the 3d printing but I know NOTHING ABOUT 3D PRINTING. Do you know where I can have the 2 mounts 3d printed for me? Thanks for your help and this video!
Dude, if your having steering wobble, check out a guy named Alphabet Soup on RUclips! He is a genius when it comes to the wolf king & warrior! The steering wobble is correctable without 3D printing or dampener period. You can fix it with a few simple tweaks! Check out that guy & happy riding my friend!
@@LifeWithStiel tilt the handle bars back towards you if you are on the scooter. Not straight up & down, but like 5° back from 90° towards you, the rider. Also the cross bar that is holding the headlights needs to be lowered. I literally folded the speaker for the horn so it pointed straight up and down so I could bring that cross bar with the lights on it, as low as possible…& it will make the wobble stop! If it doesn’t, put the handlebars a tiny bit more towards you again. It will stop! Trust me!
@@LifeWithStiel lol! My bad! I thought you were saying that you couldn’t figure out how to get rid of the steering wobble originally, so I recommended the guy that knows a lot about Kaboo scooters- “Alphabet Soup”. Then when you replied that he deleted his content, I took that as you couldn’t get the info you wanted on the steering wobble? So I proceeded to tell you what I learned from the guy “Alphabet Soup”… I am trippin as to why he deleted his videos!? They were great!!! I can’t seem to find them anywhere!?!? I knew I should’ve uploaded them when I had the chance! Damn it!!! 😎
I have a inmotion rs and there's no tire replacement videos so I'm hoping this is close enough.. I'm paranoid that I'm going to damage my motor taking the tire off with those things though 😩 I asked inmotion to do a video and they even recommended to have a professional do it instead
Lots of soapy water, have someone help by stepping/squishing the tire while you put zip ties to make the inside radius bigger and force. Seems easy but I was forcing it the majority of time. Also inch your way around. Make sure one part is seated then with your tire levers slowly start setting the tire. 2-3 inch at a time
@@Rayalas323 Yeah I agree. But still really hard to get the last bit to pop in. Im so tired in my hand and back. Dont understand they make it so so hard and impossible to get it.
@@catgirlow Yes I bought 3 vice grips to remove the air tire and bought a hobby vice to put the solid tire on (warmed the solid tire for 20 mins first). Also bought 6 tire levers. 3 tire levers with handle and abit bigger. 3 tire levers without handle and abit slimmer. Thats all I used, without these tools and the right technique, it would have been impossible.
I have a Qiewa Q power 2... Yesterday, I swapped the off road tires out on it for street tires.. I was wanting to get the task done or at least started before my tire spoons arrived from Amazon.. I got to thinking.. An idea popped in my head.. If we can zip tie it to put the tires on the rim.. Why can't we do it to take it off the rim without spoons? 🤔. To my surprise, my idea worked.. I had both tires swapped out before the spoons arrived.. While the wheels were on the scooter, I used big channel lock pliers to squeeze the tire, slipped a zip tie under and to the other side and pulled it through and zip tied it while squeezing the tire with the pliers then I did that 4x more times.. Then took the wheel off the scooter, and was able to pull the tire off the rim without any spoons. 😁🔋🛴 I thought I'd share my experience.
Good lord these stock or generic tires are hard to get on. Had pmt and got one on easy and second change after a hole was a little tougher. Front wore a hole through it and only had stock style street tires sitting around and wow are they a b**ch co pared to putting pmts on. Gonna try that zip tie method cause I feel like I’m gonna rip the rubber along sidewall I’m cranking in these so hard with tire spoons. Even have olive oil on to help slide. Should see the size of pool of sweat I was straining so much. 😬
Old stock came off pretty easy. All but one rotor screw I had to use my power grinder to cut a big slit because Allen rounded out even after using my heat gun on each screw for awhile. The one screw that didn’t strip was finger tight it felt like so maybe they missed putting locktite on that one
It was due to scratches that I made on a rim during installing new tyres. Painting spray helped me out (sprayed painting on scratches (few times) around whole the rim)
What a royal pain in the arse. It’s going to be tough deciding to go with split rim or this for my next scooter purchase. They’re fun as hell but scooting is a labor of love I guess, lol
What tires are those that you installed? I need some good road tires & those seemed to be pretty nice! Where did you get them & what size am I working with? Thanks for the video! First tire change video I came across for the wolf king! Great job!
Would it be cool to repost this if I give u credit? I know mad people who would love this. Also ur filming is short , to the point and good editing, nice work
Turned out it is harder than I was expecting. I've scratched a rim. The second tyre installing was way easier. Seems that it is more a matter of experience
I Know this has nothing to do with this video but can you please post the links to the parts you used to the mod the super 73 z1 I am amazed and I want to replicate it please thank you
What this video doesn't show you is that you need to remove the safety clips behind the axle nuts as well. In addition to that you need to loosen the swing arm bolts to relieve the clamping pressure on the sides of the tire (at least on my Wolf King you did)
Best way to remove slime once it's dried like that is a wire brush. Afterwards spray the brushed area with a little bit of black spray paint to seal it back up to prevent corrosion
You made that look super easy bro. I'm doing it the same exact way your doing it... And it ain't working for me.. 😂😂😢😢 it's just me by myself.. I put them on before but had a 2nd hand with no problem at all..
I figured out a way btr easier way to remove and install tires with no tools or zip ties all dun by hand with no damage to the tire, rim or inner tube.. it’s simple find a flat surface wer u can have the axle go thru and the rim lays completely flat then u can push the tire off n u can use your knee to hold it down while u go around the rim pushing the tire off same thing wen installing the tire doing it like in this video is more work and more hassle and having the axle on the floor will make it unstable and wobble and u will have a harder time
the zap straps are making it more difficult for me. the side I already slid on wont reach the bead cause the strabs are in the way. I'm just ruining a fking rims, I'm ready to light this thing on fire
*I am loving the **Latest.Bike** Scooter , it’s sturdy, safe and well-made. It gets me from point A to point - B- in a good record of time. ?????*
There was no way I could’ve done this without the wire tie tip. Thank you. I’m back out on the street with my Solar P1.
You mean a rebranded YUME scooter from China 🤣
Your zip tie technique worked so well on my Rs5 roadrunner tire change thank you for sharing this info.
That zip tie method is great! It made installing the tire so easy! Great work!
What's the name of the tires
@@ramonstvil 11" Wolf King GT Pro tires
also soak the new tire in hot water for 4-5 mins, makes it even easier!
I had a heap of trouble getting old tyres off and new ones on ... its harder than it looks ...I tried various techniques but came to the conclusion its a two-person job. I put a lot of scratches and marks on the rim and was really surprised the tyres didn't leak ... as that would have been a major one to fix ... be REALLY careful you don't strip the heads on the rotor screws when removing ... and remember to put LOCKTITE on every screw or bolt you put back on ...
ruclips.net/video/Gg3w8yqQEH8/видео.htmlsi=B82iyMm0SIVPx-LR check this video how you can't get scratches and make more easy to change and install the tires I had the same issue with the tire from the back,specially when it's new scooter u may having the problem to change the tires as like me
I’m afraid of scratching up the black rims… why don’t they make split rim for tubeless tires 😢
Yer I don't have enough knowledge to know why ? .... but I have to say that the performance of my scooter lets me forgive any of the other issues ... I've had it now for over 12-months and really learnt to respect the consequences of things going wrong ... I've had 2 near-death moments that I was lucky to walk away from - so PLEASE be careful.
Just changed my kaabo wolf king rear tire same exact one that came with it now it wont inflate any suggestions?
if you had some wood clamps theres a way to remove and reinstall the tires without levers at all. I use about 6 zip ties to get it on the rim with some commercial tire lube it goes right on. as for pulling em off use a pair of channel locks to compress the tire together then put about 4 or 5 clamps around the tire and you can pull it right off. no dents on your rims. Did it just yesterday on a teewing mars
Happen to know what valve stem prv size for the kaabo wolf king gt pro has?
Awesome video bro! Saving me 100 dollars :) I wasn’t sure on the install part but that zip tie method is tops !!!
Glad the video helped!
Yeah that zip tire method works magic lol
Thanks man, your tehnique is the best. In less than 2 hours i changed bought tyres.
Great video , but I wish you showed you putting the new front tire on . Ive done this but having trouble getting the front wheel back in between the forks with the clips installed .
I have a fieabor q06p. Im gonna put street tires on it. This video is pretty much the same concept of changing tires on an electric scooter. Thanks for the video 💯
Any way to replace the tire without damaging the rim? Put some electrical tape on the rim first ? A couple layers ?
The rim scratching is worrying me. Every tubeless videos shows getting scratched up
Dude your smart using zip ties im getting ready to buy one of these and i always do my research on fixing and maintenance before i get anything and this vid was so easy super fast loved it thank you both for a great video guys have a blessed day🙏👍🤗
Did you get this scooter? Any issues or changes you've had? I've read the suspension, brakes and lack of water proofing aren't great. Debating on this scooter.
Its a good scooter I love it just don’t ride it in the water at all. I rode it in the water and water seeped into both of my motors and killed them both. it also leaked into the battery compartment too didn’t damage it thank god I also blew out a controller because it overheated from trying to ride it with the Brocken motor back to my home
Your the man first ever tire change video
I ordered my King with the off road tires because our streets here in SF are full of potholes and cracks. Hopefully I made the right decision.
They won’t last long man especially the front tire
We had the same problem with the front tire lol
@@antssta whoops...off roading it is for me...😅
@@bigcity420 that he's going to ride the scooter off road to make his off road tires last longer.
My tires lasted 1000+kms before the back had a flat. Is that long or short?
That sound when you started to accelerate... I get so high from hearing that buzz...😍😂it gives me flash backs while riding at 60+ mph threw traffic .🤷
Great vid and helpful zip tie tip. I'll use it when I swap out my street tires when they arrive.
Nice leeson..thanks for making it easy to follow and good video quality as well
Does the tire spoon tools scratch the black rims? Do they end up with bare metal scratches??!
The outside cover of the motor may get scratched while removing the tire to change it. That's no biggie, though it happens.
@@Grab23bottles the OCD would annoy me… I’d prob try to lay plastic & tape over it 😃
5:25 how'd you get all that off?
Great idea with the zip ties! You got it on without damaging the rim. 👏👏
Great video!what's top speed difference between the to tires?
how is the air staying inside when there is no tube inside it?
Brilliant video,
Do you use beading tyre sealant before pumping back up the tyres
I used a DeWalt 1400 torque impact wrench to remove the bolts on my scooter sometimes the company puts them on too tight! Invest in a impact wrench you will thank yourself! 😂
Got a link of one I could buy?
@AJCoReTV You can buy them at lowes or home depot
@@AJCoReTV The Kobolt 24v impact wrench is cheaper and works
@@AJCoReTV Kobalt 24-volt Variable Speed Brushless 1/2-in Drive Cordless Impact Wrench
This scooter doesn't have an inner tube?
You're zip tie method save my a$$.. Thank you very much and keep posting new video's..Best regards...
Thanks a lot for doing this. Cheers.
yes bro! you are the man
Glad I was able to help!
I have to replace the stem valve with a new one. do I have to take off the tire. thanks for any reply.
I cant get the tire to hold air..it wont reseat to the rim???..tryed the rachet strap
When do you need a new tire.
are the off road tires no good?
Nice video bro. Good job
Good job and great video thank you
Raul Ayala i am interested in getting Kaabo Wolf King and have you had ant problems with your King when it comes to reliability ?
On scooters without split rims I use Velcro instead of zip ties, works well and it's reusable.
Good idea
Thanks for sharing the cool zip tie trick! By any chance do you know the torque I should be using for the bolts?
The zip tie trick works magic! Im not sure what the actual torque is for the bolt. Sorry
Off topic, sorry! I had to change the tire on my WWX Pro and cant get the tire and rim to go back on without removing the inside washers(the ones that go on the axel and clip into the frame)? Is there any way to expand the rear frame so that the washers can clear the frame to install the rim correctly? Without the washers the rear motor cable binds on the motor hub and frame. Voro has been no help with this!
Is there a way to reset the miles
Zip Ties! You are the Man!
Witch size of road tyres?
Hey man... My wokf king is dead... Display was blinking showing voltage dropping till turn off... Now is not even turning on... Battery has voltage and it is charging... I tested a new display and still nothing... Any help?
maybe try cycling your battery? So remove cover, locate battery cable, unplug battery from controller for like 1 minute or 2, then plug back together.
@@Rayalas323 thank you!!! remove the battery from both controllers?
@@Rayalas323 hey did not resolved... But helped.
After disconnected the controllers... And waited and tested... I disconnected again and tested the voltage.
The remain voltage in the main controller was in 2.7V, for the secondary was in 8.6...
So... I tested the battery. The plugs at the main controller... 0V. The plugs at the second 86.1V...
I guess mu bms or battery has some problems...
Yeah it might just be a BMS but I’m not sure tbh. Hopefully it’s a simple fix, bummer to see a scooter down :(
Try finding a lithium ion battery builder in your area to diagnose it.
Keep me updated.
@@danielkliemczak3450 BMS DEAD or unbalanced battery :(
I just brought the Kaabo wolf king gt and I wanna buy the 11 inch 130/40r6.5 wheel for the back , do you think it will fit?
....?
@@guerreromvp it already comes with 11" tires.
@Joe no problema
@Joe huh
Thanks man. You made it look easier for me
Is it difficult to remove the motor wire? If not, wouldn't it have been better to remove it so it doesn't get damaged from all the tugging?
Yes it’s a whore
How Can you inflate your tire ? I try again and again. I can't
I faced the same problem, could you please help?
@@Jktu000000 You need air compresseur... and close valve fast and then inflate regular
Did you notice your tires wobbling after? If you have a solution for this let me know
unloaded we saw a little wobble but once we rode it around, it straighten itself out and wobble was not noticeable while riding.
Are the tires correctly seated against the rim right the way around? What brand of tires did you use? Maybe your tire is freakishly out of balance ?
@@antssta I got the tires from voromotors I was thinking it’s off balance but might have to ride it out
@@Rayalas323 I’ll try riding around and will keep you guys posted; thank you!
i have just changed my tyres to tubeless, i didn,t know you can use slime with tubeless i have just ordered a tubeless repair kit aswell
Hey thanks for the video!
I am currently working on changing my back tire on my wolf warrior 11 plus.
I have a question, I don't have zipties atm and it s a pain in the butt to put the new tire on.. So i want to buy some zips but I was wondering what length are those u'r using? Thanks so i don't buy to smalls ones!
Happy new year and Cheers
What size a those zip ties
Nice job bro, nice tips, will be saving $ doing this on my own
Whats the width on those new street tires my freind?
I just came across your channel and subscribed. I saw you had the steering damper on the kaabo wolf warrior and I found the link for the 3d printing but I know NOTHING ABOUT 3D PRINTING. Do you know where I can have the 2 mounts 3d printed for me? Thanks for your help and this video!
Dude, if your having steering wobble, check out a guy named Alphabet Soup on RUclips! He is a genius when it comes to the wolf king & warrior! The steering wobble is correctable without 3D printing or dampener period. You can fix it with a few simple tweaks! Check out that guy & happy riding my friend!
@@j1mmyb3n24 soo i think he deleted his channel i havent seen anything
@@LifeWithStiel tilt the handle bars back towards you if you are on the scooter. Not straight up & down, but like 5° back from 90° towards you, the rider. Also the cross bar that is holding the headlights needs to be lowered. I literally folded the speaker for the horn so it pointed straight up and down so I could bring that cross bar with the lights on it, as low as possible…& it will make the wobble stop! If it doesn’t, put the handlebars a tiny bit more towards you again. It will stop! Trust me!
@@j1mmyb3n24 lol i was saying alphabet soup deleted his channel cause I haven’t seen any content.
@@LifeWithStiel lol! My bad! I thought you were saying that you couldn’t figure out how to get rid of the steering wobble originally, so I recommended the guy that knows a lot about Kaboo scooters- “Alphabet Soup”. Then when you replied that he deleted his content, I took that as you couldn’t get the info you wanted on the steering wobble? So I proceeded to tell you what I learned from the guy “Alphabet Soup”… I am trippin as to why he deleted his videos!? They were great!!! I can’t seem to find them anywhere!?!? I knew I should’ve uploaded them when I had the chance! Damn it!!! 😎
Where did you get your base grip mat?
Are all the Wolf king tires tubeless ?
Tyre looks wobbly ,how do you fix that
Straighten it out.
Where did you purchase your tires? And what size are they?
The tires came with the scooter when we bought it. Try contacting Kaabo to see if they can sell you extras
They are 90/65-6.5 :)
Do you have to seal the tire?
I have a inmotion rs and there's no tire replacement videos so I'm hoping this is close enough.. I'm paranoid that I'm going to damage my motor taking the tire off with those things though 😩 I asked inmotion to do a video and they even recommended to have a professional do it instead
Falto algo importante, no mostraste como desconectar el motor y la.pieza del freno, eso es muy importante.
I was interested by this scooter because I thought it was a split rim like my kaabo mantis.
OMG!
This worked my tubless KAABO MANTIS 8!
You can also cut the tire to avoid dame the rim.
great point
That a good idea! Will definitely try that the next time
?
@@j1mmyb3n24 the old tire can be cut off before putting on the new 1.
looks so easy but in reality its impossible. Been trying for 3 days, cant get it back in.
Lots of soapy water, have someone help by stepping/squishing the tire while you put zip ties to make the inside radius bigger and force. Seems easy but I was forcing it the majority of time.
Also inch your way around. Make sure one part is seated then with your tire levers slowly start setting the tire. 2-3 inch at a time
@@Rayalas323 Yeah I agree. But still really hard to get the last bit to pop in. Im so tired in my hand and back. Dont understand they make it so so hard and impossible to get it.
did you get it
@@catgirlow Yes I bought 3 vice grips to remove the air tire and bought a hobby vice to put the solid tire on (warmed the solid tire for 20 mins first). Also bought 6 tire levers. 3 tire levers with handle and abit bigger. 3 tire levers without handle and abit slimmer. Thats all I used, without these tools and the right technique, it would have been impossible.
@@itsmesezgin solid tire on a wolf king? BS!!
Nice job, great video! Thanks a lot! 👏🏼
Great video! The deck, is that custom? Can you reference where I can purchase it as well for a the wolf king GT? Thanks
Why didn't you video the front replacement that's the tyre i needed to change zzzzz
I have a Qiewa Q power 2... Yesterday, I swapped the off road tires out on it for street tires.. I was wanting to get the task done or at least started before my tire spoons arrived from Amazon.. I got to thinking.. An idea popped in my head.. If we can zip tie it to put the tires on the rim.. Why can't we do it to take it off the rim without spoons? 🤔. To my surprise, my idea worked.. I had both tires swapped out before the spoons arrived.. While the wheels were on the scooter, I used big channel lock pliers to squeeze the tire, slipped a zip tie under and to the other side and pulled it through and zip tied it while squeezing the tire with the pliers then I did that 4x more times.. Then took the wheel off the scooter, and was able to pull the tire off the rim without any spoons. 😁🔋🛴 I thought I'd share my experience.
GoodLookin' my Man!!! GTH!!!
Good lord these stock or generic tires are hard to get on. Had pmt and got one on easy and second change after a hole was a little tougher. Front wore a hole through it and only had stock style street tires sitting around and wow are they a b**ch co pared to putting pmts on. Gonna try that zip tie method cause I feel like I’m gonna rip the rubber along sidewall I’m cranking in these so hard with tire spoons. Even have olive oil on to help slide. Should see the size of pool of sweat I was straining so much. 😬
Old stock came off pretty easy. All but one rotor screw I had to use my power grinder to cut a big slit because Allen rounded out even after using my heat gun on each screw for awhile. The one screw that didn’t strip was finger tight it felt like so maybe they missed putting locktite on that one
What size tires go on the wolf king?
90/65-6.5
I can't seal a new tyre, did anybody have the same problem?
It was due to scratches that I made on a rim during installing new tyres. Painting spray helped me out (sprayed painting on scratches (few times) around whole the rim)
What a royal pain in the arse. It’s going to be tough deciding to go with split rim or this for my next scooter purchase. They’re fun as hell but scooting is a labor of love I guess, lol
Thank you a lot for this video
Misura delle gomme ?
nice work 💪
What tires are those that you installed? I need some good road tires & those seemed to be pretty nice! Where did you get them & what size am I working with? Thanks for the video! First tire change video I came across for the wolf king! Great job!
Wolf King GT Pro replacement tires
@@VegitoBlackityBlack they look like CST street tires
Great Video !
nicely done :) :) :) link to the spoons on Amazon would be awesome if you could share :) Cheers from Canada
Great info, thanks 👍
Installation is easy once you have the correct method. It can be done in less than five minutes.
sure bro
I keep telling people in the Facebook group it's not hard to change the tires, my m365 was alot harder
It just takes patients and a little bit of force but anyone is able to do it :)
philly whats the group? im out in pittsburgh but we are way behind the game i think im the only person with a wolf in the city
@@highdesertbiker kaabo scooters group
@@Rayalas323 shops are charging $100 a tire smh I can get 4 car tires swapped and balanced for $100
@@bighorse215 wat if u bring ur own?
Would it be cool to repost this if I give u credit? I know mad people who would love this. Also ur filming is short , to the point and good editing, nice work
tire size
Turned out it is harder than I was expecting. I've scratched a rim. The second tyre installing was way easier. Seems that it is more a matter of experience
Thanks guys, love the ziptie trick👍
Where is the air?
In the tire
Great job. Thanks!
I Know this has nothing to do with this video but can you please post the links to the parts you used to the mod the super 73 z1 I am amazed and I want to replicate it please thank you
Great vid, thanks!
you don't show how to get the wheel off or put back on! When I did it, getting the wheel back on was the hardest part.
What this video doesn't show you is that you need to remove the safety clips behind the axle nuts as well. In addition to that you need to loosen the swing arm bolts to relieve the clamping pressure on the sides of the tire (at least on my Wolf King you did)
Did you have to loosen all 4 bolts?
@@jessecarver9176 Just loosened the 2 bots holding the tire on to the swing arm... Did that for just the rear tire, front tire came off fine.
Best way to remove slime once it's dried like that is a wire brush. Afterwards spray the brushed area with a little bit of black spray paint to seal it back up to prevent corrosion
You made that look super easy bro. I'm doing it the same exact way your doing it... And it ain't working for me.. 😂😂😢😢 it's just me by myself.. I put them on before but had a 2nd hand with no problem at all..
Why in the shit are they not split rim design??
I figured out a way btr easier way to remove and install tires with no tools or zip ties all dun by hand with no damage to the tire, rim or inner tube.. it’s simple find a flat surface wer u can have the axle go thru and the rim lays completely flat then u can push the tire off n u can use your knee to hold it down while u go around the rim pushing the tire off same thing wen installing the tire doing it like in this video is more work and more hassle and having the axle on the floor will make it unstable and wobble and u will have a harder time
the zap straps are making it more difficult for me.
the side I already slid on wont reach the bead cause the strabs are in the way. I'm just ruining a fking rims, I'm ready to light this thing on fire
I keep destroying my rim when I do this...
I don't recommend soapy water for rims with an electric motor in it.
Lock tight your rotor bolts. If they back out your hub will be ruined.