Just use the correct grade,a good decent oil,not cheap but not expensive & do it before 5,000m, your car will last for many,many years my friend. Check the PCV too, clean it out....don't forget that.
4.4 quarts with oil filter replacement, 4.1 without replacement. Magic marker your 5 quart jug at a bit over halfway between bottom of jug and first quart line indicator. Personally, I like to stop around 4.2 to account for residual old oil in the engine and sloping ground, then add last 0.2 after driving and letting it sit overnight. Oil plug torque setting is 26 foot-pounds (ft/lbs). If no torque wrench, generally tighten until you can't anymore. But really, do yourself a favor and spring for a $50 torque wrench, if you're changing your own oils you'll use it a lot. Never drop a torque wrench. Hand-tighten oil filter tight until you can't move it anymore, but never overtighten. Oil change shops like jiffy lube overtighten so owners wanting to do their own changes give up and take it to the shop. The 2017 Yaris iA owners manual is worst I've ever seen. Expect to google and RUclips most things on this car.
Best demonstration I’ve ever seen of someone who doesn’t have a clue how to do the job. Jeez!
eeeasy!
Appreciate it🙏 helping the homegirl change her oil today
Cool 😎
Thank you this just saved me 100 dollars by doing it myself!
Just use the correct grade,a good decent oil,not cheap but not expensive & do it before 5,000m, your car will last for many,many years my friend. Check the PCV too, clean it out....don't forget that.
4.4 quarts with oil filter replacement, 4.1 without replacement. Magic marker your 5 quart jug at a bit over halfway between bottom of jug and first quart line indicator. Personally, I like to stop around 4.2 to account for residual old oil in the engine and sloping ground, then add last 0.2 after driving and letting it sit overnight.
Oil plug torque setting is 26 foot-pounds (ft/lbs). If no torque wrench, generally tighten until you can't anymore. But really, do yourself a favor and spring for a $50 torque wrench, if you're changing your own oils you'll use it a lot. Never drop a torque wrench.
Hand-tighten oil filter tight until you can't move it anymore, but never overtighten. Oil change shops like jiffy lube overtighten so owners wanting to do their own changes give up and take it to the shop.
The 2017 Yaris iA owners manual is worst I've ever seen. Expect to google and RUclips most things on this car.
Appreciate the video!
Btw if the oil drain plug is a hex nut you’ll need an 5/16 Allen wrench to take it off
Thanks my dude 👍🏾 detailed and helpful.
No problem
My oil drain plug us jacked up, do you know what size is the plug and where can I get them?
i just ordered the original one from toyota dealership 9$
Is it manual too? There's barely any info about these cars at all and I have been curious how to do all fluids
Look up the Mazda 2 instead. They’re basically the same cars
bro what is the name of joint of the tire?? no need a jack.. please tell me
Did I have to remove a skid plate from the bottom
is 4 liters enough to do my oil change or do i need to buy another liter? thanks.
4 liters is enough..
It is a Mazda!!!!
Yup