Woodturning | Walnut Platter
HTML-код
- Опубликовано: 2 окт 2024
- Today in the workshop i take a Walnut bowl blank and make a large platter or bowl . this woodturning was a fun one. as always i turned this bowl on the record power coronet herald wood lathe and used my easy wood tools carbide turning tools . i finished this with yorkshire grit abrasive paste , gold embellishing wax and microcrystalline wax both from Hampshire sheen
Music from Epidemic Sounds: www.epidemicso...
GET 15% OFF STARBOND CA GLUE BY CLICKING THE LINK BELOW AND USING COUPON CODE 'JP15'
www.starbond.c...
JP Woodwork Logo Tee - teespring.com/...
JP Woodwork Face Logo Tee - teespring.com/...
Huge thanks to the supporters of my Channel:
Easy Wood Tools:
www.easywoodtoo...
Yorkshire Grit:
yorkshire-grit....
Email : jpwoodwork@hotmail.com
Facebook Page: / jpwdwork
Twitter : / jp_woodwork
Instagram : / jp_woodwork
#JPWOODWORK #EASYWOODTOOLS #WOODTURNING
Great turning. Great music.
Thanks buddy
Sorry but I disagree completely- music is far too loud and the only reason I stopped watching one minute in
@@johndauphinais953 you dont like the video because of the music which you can quite easily turn off? dont you think that is a bit unfair considering the work that went into making the video... oh well, i cant please everyone, thanks for the one minute watch time
Why the music? Distracts from your video.
Felt like it
That is a gorgeous piece of walnut! The grain pattern is to die for!
Thanks buddy
Good work,but why the music so loud over the turning sounds
Thank you, the reason for the music is i live in an area where there is constant background noise now so it would make it practically impossible to make a video without constant reshoots, hope you can understand that, i tend to get this comment a lot and some people are nicer than others
@@jpwoodwork thanks for the reply,will deep that in mind 👍
@@michaelbishop488 appreciate it
@@michaelbishop488 no worries mate
Wow. Another stunningly gorgeous piece. 😊💕🇺🇸❤
Thank you very much
Rest job up as ever. Love the colour of that piece
That was mean to read great job as everJP lol. Hate predictive text!!
Thanks mate
lol no worries mate
, happens to the best of us
What do you use for finishing before you spray on the cellulose sanding sealer? Where can I get it?or, is it just denatured alcohol to remove the sanding dust?
that is correct, it is just Denatured Alcohol, here in the UK we put a purple dye and also call it Methylated Spirits, hope that helps
Music is horrendous
sorry you think that, i do try to pick something to suit everyone and change it up too and unfortunately due to the circumstances that i am in, i am left no option but to have music in my videos, if you go to my more recent videos and met people like you in the middle and they seem to be happy about that and done a voice over but there is still music in there again because of the circumstances i am in, believe me i wish i could have just tool sounds but its just not possible
Drop the music
Naa, I feel the video needs it given my reasons… thanks for the suggestion and the attitude anyways, Happy 2024
Hi JP. Superb work. Thanks for sharing. I am a bit of a newbie and so curious as to where you might source a piece of walnut like that. Thanks so much
This was a while ago now, I got this pice from a wood store place in Scotland I believe but you should be able to get some online just by typing in woodturning bowl blank or something to that effect, thanks a lot
@@Ukenick no worries, good luck in your search
Hi JP, a new Woodturner here, what was the tool that you were using here please? I'm not sure if it might have been a carbide tipped tool?
Hi Andy, they were all carbide tipped tools made by easy wood tools
Sanding Sealer is toxic So this platter Cannott be used for food purpose such as fruit or Salad 🥗 🍅 ..But a nice platter.
i agree, most of the stuff i turn is decorative or for using for non edible stuff anyways, if i do make something that is intended for food i will work around the sanding sealer :) thanks for watching
Hi JP. How does your lather perform with large diameter wood on it? How has the lathe itself performed?
Hiya, so i recently had the opportunity to upgrade to a much bigger lathe and if it wasnt for space i would have kept this lathe, i loved it, i never let me down one, i have turned some huge pieces on it, i turned a 21 inch piece out board on it and it never let me down once, the whole time i had it i never moved it off the middle belt unless i was doing huge pieces where i needed that little more torque and i lowered the belt ratio and once again it performed flawlessly, i highly recommend it if you are looking into buying one :)
Another clonker Jamie!👍👍👍👍👍👍👍👍👍👍👍👍😎😎😎
cheers mate
How thick was this piece in the beginning?
this was about an Inch and a Half thick in total
One of my favourites black walnut, even like the distinctive smell when turning. Cracking job👍
Cheers Mark
WOW!!! I love the grain; it sort of makes the platter oval looking. This is such a pretty piece. Very beautifully done, as usual, Jaime.
Thank you very much, i appreciate you
Very impressive, i love the color of the wood after the finish
Thanks mate
Nice piece again Jp well done looking forward to see the next video bye.
Thanks buddy
Beautiful bowl, JP!
Thanks Rick, appreciate it mate
It’s a bowl not a platter.
ok
🍻👍
👍🏻
Very nice 👍
Thanks buddy
Pambihira ng kulay ng kahoy nayan kaibigan napakaganda ng pagkakagawa. Ang galing mo expert ka.wood mate turning
Thank you
Awesome...walnut is one of my faves...love the colours of it. Turned out great, as always...love it
Thanks very much
Very nice. Thanks for sharing.
Thank you
Is that a coronet herald?
Yes that is correct, it is
@@jpwoodwork looks like it has lots of power. Great work.
@@kerrysaunders9996 it sure does, its has 3 belt positions and ive never moved it off the middle belt but the torque on it is incredible!
👏👏👏👏👏👏👏👏👏👏👊🇧🇷👍💯
Thank you
Very nice JP! Love it
Thanks Lewis
Looks awesome 👌
Cheers Matt
Great job. Do you sharpen the carbide inserts?
Thank you and no never, some people do but I don’t recommend it
Great looking piece well done 👌 👍
Thanks mate
Amazing piece JP, well done 👏👏👏👏
Thanks buddy
Nice one mate! 👍
Thanks buddy
Present
Lol I thought I was in the chat when I sent that comment 😂😂😂🤦🏼♂️ anyways great turning Jamie really enjoyed the video!!!
and correct :D
@@SteelBladeWoodworks cheers Joey
It came out Gorgeous how big is it
Thank you very much, i appreciate it, it came out at 13.5 inches in diameter and 2 inches deep
Where did you get the mortise size templates from? Grest video. Thanks for sharing.
Thank you, I got them from Amazon, here’s a UK link but if you put the same title in for your country I’m sure you will get the same results…. www.amazon.co.uk/dp/B08DTVW18K/ref=cm_sw_r_cp_awdb_imm_W8YB4A2HRG0AFS5F9RKK
Unfortunately I did try the US Amazon site and the templates are not available. Only UK as far as I can tell.
@@billsanders8793 Ok, i will do some research and ask the guys at Easy wood tools for you as to the availability and get back to you asap
But here’s an update! If you go the Easy Wood tools home website and select the US store it is listed there for $14.99 US plus shipping. Just ordered mine. Freight to GA was $3.00 reasonable I think.
@@billsanders8793 oh thats great news, thanks for letting me know
Boa noite meu amigo eselenti trabalho muito bom mesmo
Muito obrigado, o mesmo para você.
Great platter jp 👌
Thanks mate
🌟🌟🌟🌟🌟
Thanks Connie 👍
Likes 226
Thanks