If you have spare servos, a cheap esc and receiver laying around, this 'cheap' 1/18 scale rockcrawler can really shine. Even if you have to purchase everything, it is worth the fun of being able to build a competent crawler for dirt cheap. I've upgraded mine with a cheap HobbyKing brushed esc, a compact 2s 1200 mah lipo meant for electric planes, a proper standard servo and a specktrum receiver. This thing now has some serious crawling power and it took me maybe an hour to do the upgrades. Disassembly is SUPER easy, everything is screwed together from the factory, so you shouldn't have to cut or destroy anything on the body or chassis. IMPORTANT: If you are using a 7.4v battery you MUST set the throttle trim (max throttle) to 50% or you will most likely burn out the motors. They MAY be able to handle 7.4v for a short time, but I believe they will probably overheat and prematurely wear out. I am not sure why this guy is 'reinventing the wheel' with the servo linkage. I used a similar full sized servo and just used the factory linkage (I did have to slightly drill the servo horn to fit my standard servo) I'm probably going to post a video of what I've done. What I like about my set up is the compact lipo battery fits almost perfectly into the stock compartment (No battery loosely mounted up top like it is in this video) The truck has variable throttle/steering and some SERIOUS power...it performs on par with my friends $110 Axial Deadbolt and cost me $27
Thanks for putting up this video. I just finished my version of this mod. I went with a micro servo, a micro receiver, and was able to not have ANY wires/cables hanging out. I got all the electronics in the chassis and use the stock battery compartment for lipo battery. Initial testing is good. I'll be posting more info on my channel soon. BTW you can order replacement motors off Banggood, I've had to replace a couple of motors on another stock one of these I have. Thanks again for the inspiration!
I got the same one. Didnt actually increases performance like you did. I put a flat bracket shaped to lock the front suspension. Shaped a metal brush gaurd for the front and matched the 2 of set skrews with the steering adjuster cut out. I also moved both shocks to the back in new locations. It's all new to me so super fun. Nice video! Would be cool to get a big wheel and increase the size till you get a good top speed.
That esc can work at 1S lipo so it might be worth trying it with a 1S for lower crawling speed and lighter weight. It might then be possible to fit it in the battery compartment for lower CoG. Also you can buy springs on ebay with a thinner wire. might be nice to setup the springs a bit softer.
@@MNdaTV Yea, 1s as a crawler and 2s and better motors as a rock racer perhaps. I'm thinking about trying softer springs and perhaps even see if there are any oil shocks that will fit.
@@flo-ridafpv5713 Did you try the 1s pack yet? I just got a devastator 1/24th we broke a driveshaft so ordered some of the metal ones. going to see if the URUAV ones fit as they seem to have better pins that screw all the way through, the HBX ones only have a small grub screw that tightens to one side of the transfer case drive flange.
@@izzzzzz6 yea it sucks not enough volts to give torque, but mine in a cheap amazon one runs on 4 cell nicad packs, so wired 2x 18650s in series to a 5v step down n works great, but im bored w it already, owned it 3 days...too bumpy n gets stuck.....but i fly fpv freestyle drones normally soo
If you took 2x front axles so one was on the back and have 2 steering servos wired in parallel or setup a mix on the transmitter for some sort of rear steer. What do you think? Possible? Worth it?
My truck is non modified and stock parts greased up, i burnt the rear motor smoking trying to get her out of the mud, Simply took apart the motor inside and replaced it with a new coil set
Nice upgrade. I want to know that isn't that power effect to the wheels gears? I think the plastic gears will burn or distroy fast because of high torque and speed.
Every look cool, but i try to included speed levels too, like slow climbing like expensive crawler has. Normally one speed that come with the box, if this vdo or it have but not in vdo can you show as well please, that will be appreciated and also i read other comment about brushed motor, can you sent the link as well too please, i try to upgraded only once and last long. Thanks
@@JS-rn4bs yes i just want to upgrade this car with parts that will make this more durable.. i have lots of hobbygrade rc and i also have a nitro buggy but some of my friends cannot afford the hobby so we are racing the crawler with them..i know the crawler is slow but once you try racing with same RC..the fun is the same🙂 others would say why the heck you would race the toy when it is a crawler..yep we know but thats the only toy possible for there budget and at the end of the day, we still have fun and thats what is important🙂
@@JS-rn4bs we notice that as months go by racing this RC..the plastic hubs deteriorate and the tire are sagging.. that why i will be glad if someone can upgrade this with bearing so we will be forever grateful..🙂
@@MNdaTV I can't actually believe that a RUclipsr with 50k sub replied to a message. Really appreciate it. Now I will not disturb you because you cleared all my doubts. maybe in the future.
Anyone had any damage on your esc,my esc worked about 1 mint then the forward or backward functions are not working..😢 i did all correcty connections, then how its happend !
Hello, how do I have the same car, a question .. an engine burned so I fit the two engines so that they are the same ... car became faster almost twice the speed it had but now it has no power in the subidad .. what is the problem, and if it can be solved thanks
just replace the brush of the two original motors... because if you change it with two motors not suitable for RC like motors from tamiya 4Wd or other motors from a non RC vehicle.. your rc will just run in flat surface but it has no torque so it cannot perform crawling very well so just used the original motors just replace the brush part because the winding of that motor is built for torque..i hope this helps..
@@malavika.s1076 yes if ur on a budget get the tx4 transmitter it comes with reciever just read the manual where to connect the servo and esc to the receiver tx4 has a RANGE of 200-300 meter if i remeber correctly
But for making it brushless we have to cut the gearboxes and we have to buy metal gears to avoid melting of gears we have to use another two escs to make it brushless
If you have spare servos, a cheap esc and receiver laying around, this 'cheap' 1/18 scale rockcrawler can really shine. Even if you have to purchase everything, it is worth the fun of being able to build a competent crawler for dirt cheap.
I've upgraded mine with a cheap HobbyKing brushed esc, a compact 2s 1200 mah lipo meant for electric planes, a proper standard servo and a specktrum receiver. This thing now has some serious crawling power and it took me maybe an hour to do the upgrades. Disassembly is SUPER easy, everything is screwed together from the factory, so you shouldn't have to cut or destroy anything on the body or chassis.
IMPORTANT: If you are using a 7.4v battery you MUST set the throttle trim (max throttle) to 50% or you will most likely burn out the motors. They MAY be able to handle 7.4v for a short time, but I believe they will probably overheat and prematurely wear out.
I am not sure why this guy is 'reinventing the wheel' with the servo linkage. I used a similar full sized servo and just used the factory linkage (I did have to slightly drill the servo horn to fit my standard servo)
I'm probably going to post a video of what I've done. What I like about my set up is the compact lipo battery fits almost perfectly into the stock compartment (No battery loosely mounted up top like it is in this video) The truck has variable throttle/steering and some SERIOUS power...it performs on par with my friends $110 Axial Deadbolt and cost me $27
Where’s the vif
pls post a video or dm me, id like to do the same upgrade
Pov me: taking out everything then realize I need t buy
Thanks for putting up this video. I just finished my version of this mod. I went with a micro servo, a micro receiver, and was able to not have ANY wires/cables hanging out. I got all the electronics in the chassis and use the stock battery compartment for lipo battery. Initial testing is good. I'll be posting more info on my channel soon. BTW you can order replacement motors off Banggood, I've had to replace a couple of motors on another stock one of these I have. Thanks again for the inspiration!
would you contact me with what you used and maybe a pic or two, i want to do the same and like nothing exposed
Adding servo, was killer move
I got the same one. Didnt actually increases performance like you did.
I put a flat bracket shaped to lock the front suspension. Shaped a metal brush gaurd for the front and matched the 2 of set skrews with the steering adjuster cut out. I also moved both shocks to the back in new locations.
It's all new to me so super fun. Nice video!
Would be cool to get a big wheel and increase the size till you get a good top speed.
Si exele te 👍
Very nice upgrade
That esc can work at 1S lipo so it might be worth trying it with a 1S for lower crawling speed and lighter weight. It might then be possible to fit it in the battery compartment for lower CoG. Also you can buy springs on ebay with a thinner wire. might be nice to setup the springs a bit softer.
Yeah. 1s lipo would do great. 2s is a bit too much for those 180 motors. It wears the brush out quickly.
@@MNdaTV Yea, 1s as a crawler and 2s and better motors as a rock racer perhaps. I'm thinking about trying softer springs and perhaps even see if there are any oil shocks that will fit.
Thanks for this my dude, got plenty of 13 to 1500 cells i can harvest for my lil DJI HD FPV crawler project
@@flo-ridafpv5713 Did you try the 1s pack yet? I just got a devastator 1/24th we broke a driveshaft so ordered some of the metal ones. going to see if the URUAV ones fit as they seem to have better pins that screw all the way through, the HBX ones only have a small grub screw that tightens to one side of the transfer case drive flange.
@@izzzzzz6 yea it sucks not enough volts to give torque, but mine in a cheap amazon one runs on 4 cell nicad packs, so wired 2x 18650s in series to a 5v step down n works great, but im bored w it already, owned it 3 days...too bumpy n gets stuck.....but i fly fpv freestyle drones normally soo
Super
awesome vedio bro 👍👍
If you took 2x front axles so one was on the back and have 2 steering servos wired in parallel or setup a mix on the transmitter for some sort of rear steer. What do you think? Possible? Worth it?
If you have two of these car lying around.
Deserves more subs👍
My truck is non modified and stock parts greased up, i burnt the rear motor smoking trying to get her out of the mud, Simply took apart the motor inside and replaced it with a new coil set
Super bro do stunts with that
Would you upgrade the damper and see what happens?
I've thought of this too, but given how light these things are, the suspension is quite adequate.
Ooo bro thanks
i want to ask that can i use MG995 servo motor on 7.4 V , will it burn ? or work normally ?
At 2:04 you put something to the tower pro. Was it there itself on the car or did you buy it? the screws also? Same doubt at 2:18.
You will get them with the servo
@@mndatvcreation9211 ok.. what about the screws for thingy at 2:18? was it there on the car or did you buy it?
@@shayaansameer9171 included in servo
Ok the power and battery is done but what about grip of tyers
Nice upgrade. I want to know that isn't that power effect to the wheels gears? I think the plastic gears will burn or distroy fast because of high torque and speed.
Cool bro...
Is this car variable speed?
Did you change it to brushless motors?
Thanks.
Not variable speed or variable steering in stock form. You would have to replace the ESC and add a receiver.
I’m going to do something similar to my son’s cheap 1/10 scale crawler.
Every look cool, but i try to included speed levels too, like slow climbing like expensive crawler has. Normally one speed that come with the box, if this vdo or it have but not in vdo can you show as well please, that will be appreciated and also i read other comment about brushed motor, can you sent the link as well too please, i try to upgraded only once and last long. Thanks
Bro did you find any way to include different speed levels?
@@Aravind-hn1kh You would have to replace the receiver/ESC. Not hard to do on this truck.
After doing all things can it work with their normal remote?
No it want because the stock remote doesn’t have a binding button and is also not proportional and he made it proportional so it ruins the point!
@@talkingthaim Thanks for telling 😁
LOL No the old remote suckz only has a range Of 80-100 meter buy 700 pessos controll has a 200-300 meter complete with reciever
@@faizkun4889 Ohk
👌 👍
U r used Robocraze Orange 5200mah 4S 40C (14.8V) Lithium Polymer Battery Pack (Lipo) | 14.8V Batteri
It's from Robu
Cool i just got a car like this yesterday also how fast is the car
Not very fast but very strong.
Yeah i knew it was not faster i used to modify cars that use AA battery to charging bettery then it is so much stronger
I also have the green car you got thare
@@MNdaTV add stong driveing motors to car
@@dummie-8968 yeah. But the brushed motor dont last very long. I had to change itt
At 4:24 you plugged in the wires to a transmitter. is there any order for plugging in or could we plug it anywhere in the transmitter?
That's the receiver. You can plug it to any channel you want
Can you please mod the axles with bearing..tnx
Nice video :)
It probably wouldn't be a worthwhile upgrade given how slow crawlers move. I'm not even sure if it would use a standard bearing size.
@@JS-rn4bs yes i just want to upgrade this car with parts that will make this more durable.. i have lots of hobbygrade rc and i also have a nitro buggy but some of my friends cannot afford the hobby so we are racing the crawler with them..i know the crawler is slow but once you try racing with same RC..the fun is the same🙂
others would say why the heck you would race the toy when it is a crawler..yep we know but thats the only toy possible for there budget and at the end of the day, we still have fun and thats what is important🙂
@@JS-rn4bs we notice that as months go by racing this RC..the plastic hubs deteriorate and the tire are sagging.. that why i will be glad if someone can upgrade this with bearing so we will be forever grateful..🙂
All i want is for it to work on a power bank but it doesnt as it requires 4.8v at 2.25amp. while power bank gives only 2 amp
👍👍👍👍
Wires hanging, susceptible to water damage?
It's just temporary you know. Having fun driving one time before i throw it away.
You will throw it away bro it's now working like monster Jam trucks
This 1000mah lipo how many mins lasted ? I want more time to run so shall I use 5000mah 7. Volts lipo ? Will it explodes if I use higher may?
10 to 20 min on 1000mah. I don't think that will explode. Bigger mah will not increase voltage. Use any mah 2s lipo
@@MNdaTV bro all battery higher mah is 3s,4s no 2s so shall I use 3/4 s?
@@1volt42 no. The motor will burn
Can i remove the flysky remote and use it for other things after i use for rc car?
Yes, you can make any rc.
@@MNdaTV I can't actually believe that a RUclipsr with 50k sub replied to a message. Really appreciate it. Now I will not disturb you because you cleared all my doubts. maybe in the future.
@@shayaansameer9171 😃😃 thank you. Note that. You will get brushed esc only at robu in India.
Also, the adaptor is a male connector right?
2.4ghz rc car but remote change
Please idea
Can try putting rc snow tracks on it
cool video can you please tell me what to buy to upgrade mine
You need flysky transmitter and receiver, brushed motor esc, servo motor and 2s lipo battery
MNdə TV Thanks bro love your video mine the front wheel not turning by using the remote. Where can I order the upgrade parts please
@@TG-ng2kowelcome . change the motor on the front axle. Links are in the description
MNdə TV thanks I will try
How can i upgrade it motors?
Summit racing hold line music
Jit na tarif karu ut na kam hi
Thanks
Anyone had any damage on your esc,my esc worked about 1 mint then the forward or backward functions are not working..😢 i did all correcty connections, then how its happend !
Where can we got mother board of this car please tell
Can we use a computer charger for charging the battery? I have a 65w charger.
No, don't take lipo battery lightly bro. It will catch fire if not done properly. Buy a good lipo battery charger
@@MNdaTV What about this?
robu.in/product/orange-ac-100-240v-to-dc-12v-5a-60w-power-adapter/
@@shayaansameer9171 that is a laptop charger
Can we increase speed by changing battery?
Please reply
yes, but the brush in the motor will wear out very fast. I am using 7.4v lipo battery.
@@MNdaTV I would like to use 6v battery. Will it harm?
How much Mah for your battery?
@@fazilvk1451 I dont know whether the pcb can handle 6v,. Give it a try
@@fazilvk1451 You'd probably be fine with 6v as it is at 4.8v stock. Just check to make sure motors aren't getting too hot.
I upgrade this car to 5km long distance + fpv camera
i ordered mine still dint arrive but im planning adding
ESC
Metal Servo
new servo
if i have the cash to buy the transmitter and new motor
Mine worked
First
My channel subscribe plz
This full material prize????
About rs. 7000 without the car
What material we require
Hello, how do I have the same car, a question .. an engine burned so I fit the two engines so that they are the same ... car became faster almost twice the speed it had but now it has no power in the subidad .. what is the problem, and if it can be solved thanks
maybe the motor brushes wear out
@@MNdaTV thank I'll see that
just replace the brush of the two original motors... because if you change it with two motors not suitable for RC like motors from tamiya 4Wd or other motors from a non RC vehicle.. your rc will just run in flat surface but it has no torque so it cannot perform crawling very well so just used the original motors just replace the brush part because the winding of that motor is built for torque..i hope this helps..
Bhai iski video jaldi banana phir dekho kine speed main jati hai yeh car
Bhai mai na tuzhe ek idea deta hoon ki iss car ke peche wale tyre ko brushless motor laga ke dekh kyun ki maini bhi lagaya hai isiliye
Yes
Ok
Buat yg skala 1:12 apa bisa om???
It's a 2s 1000mAh battery, right?
Yes, you can use smaller mah battery. But use only 2s
Can we use the same remote?
No
@@MNdaTV ok!!! thankyou!!
Unfortunately not, you would have to replace the receiver and ESC (stock one is a simple board with both fit it)
assalamualaikum bng apa kbr, oyah maaf mau nnya nih, aku punya mobilan kaya punya abng itu gimana cara merakit nya yah supaya bisa kaya punya abng
How much km speed does it go?
I don't really knoww
Hi
Bro i had a trench electric desert truck how to upgrade it and which motor I should use I am confused to upgrade this bro please say know
can I buy this parts from Amazon or Flipkart plz give me link
Bhai jitna kharcha use upgrade karne me aayega na usse to achha rc adventure se 1 dhamakedar car khareed loonga samjha bhai
Yes bro aur isme kya pata upgrade Karne mein fail hogye to
After this upgrade the car's range increased???
Of course. I used flysky i6 transmitter and receiver, which has a range of about 500m
@@MNdaTV Can i use low budget transmitter and reciever
@@malavika.s1076 yes if ur on a budget get the tx4 transmitter it comes with reciever just read the manual where to connect the servo and esc to the receiver tx4 has a RANGE of 200-300 meter if i remeber correctly
Remote nya remote apa namanya mas...
Can u upgrade mine too plzz
why it is not going slow
Price
Sir upgrade brushesless motor
Just replace brushless motors with brushless motors and buy brushless esc instead of this brushed esc in the video. Every other process is same
Bro can you repair my offroad
Why are you putting this video fast
And how much money for all
can u upgrade for me iam 12 years
first of all u need money couple 100 or 50 dollar u need
transmitter and a reciever
electronic speed control in short (ESC)
Servo better if metal
then follow the video
On off in batan kharab hai kaise dik kare
Please tell me the music🙏🙏🙏
i tried it and killed the motors 5 times
How long it takes to charge battery bro plzzz jai india
5 hours...the included batteries and charger are absolute crap.
Sir can we put a 1500 mAh battery in it. To make it faster
Increasing the battery mah will not make it faster.
Hey can you please give me the link of green sheet with lines on your table plzz
How did the speed increase without changing mototrs?
It is running at the same speed but the strong bettery made it a bit stronger i guess i dunno
You are right. But the brush in the motor broke after 2 days.
@@MNdaTV use brush less motor if possible
But for making it brushless we have to cut the gearboxes and we have to buy metal gears to avoid melting of gears we have to use another two escs to make it brushless
@@sriparthreddyreddyrguktian6023 many have used without gearbox search on RUclips if it's for fun not for project
Манда ТВ
Auyw
I don't recommend doing this
please reply
Not slow motion driving
It was the real speed driveing
I think i dunno
Slow motion
@@MNdaTV in slow motion it looks cool
VbBBC CNNk
i want to ask that can i use MG995 servo motor on 7.4 V , will it burn ? or work normally ?
Are you going to use only the motor
@@MNdaTV no i want to mod my rc crawler like you with mg995 servos and 7.4v li-ion battery
@@MNdaTVwith Flysky FS-GT2 Transmitter with FS-GR3E Receiver
@@billingravi2197 Okay. Which esc are you going to use
@@MNdaTV its a 20A Brushed Electronic Speed Controller by robu.in